日本語 dropdown-ico

NEC MultiSync V652-TMの取扱説明書

45ページ 関係なし
ダウンロード

ページに移動 of 45

Summary
  • NEC MultiSync V652-TM - page 1

    User’ s Man ual MultiSync V652-TM ...

  • NEC MultiSync V652-TM - page 2

    Inde x DECLARA TION OF CONFORMITY ............................................................................................................. English-1 Important Information ................................................................................................................................... English-2 W ARNING ....................... ...

  • NEC MultiSync V652-TM - page 3

    English-1 English DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U .S. Responsible P arty: NEC Dis ...

  • NEC MultiSync V652-TM - page 4

    English-2 Impor tant Inf ormation TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE. REFER SERVICING T ...

  • NEC MultiSync V652-TM - page 5

    English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONITOR: • DO NO T OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualifi ed service personnel. • Do no ...

  • NEC MultiSync V652-TM - page 6

    English-4 Cleaning the P anel • When the panel is dusty , please gently wipe with a soft cloth. • Please do not rub the panel with hard material. • Please do not apply pressure to the surface. • Please do not use OA cleaner as it will cause deterioration or discolor on the surface. Cleaning the Cabinet • Unplug the power supply • Gently ...

  • NEC MultiSync V652-TM - page 7

    English-5 English Contents Y our new MultiSync monitor box* should contain the following: • LCD monitor • Power cord* 1 • V ideo Signal Cable • Wireless Remote Control and AA Batteries • Setup Manual • CD-ROM • Clamp x 1 • Screw with washer (M4 x 10) x 1 • USB Cable x 1 Power Cord* 1 Setup Manual CD-ROM Setup Manual Video Signal C ...

  • NEC MultiSync V652-TM - page 8

    English-6 This de vice cannot be used or installed without the T ab letop Stand or other mounting accessor y f or suppor t. For proper installation it is strongly recommended to use a trained, NEC authorized ser vice person. Failure to f ollow NEC standard mounting procedures could result in damage to the equipment or injur y to the user or install ...

  • NEC MultiSync V652-TM - page 9

    English-7 English Attaching Mounting Accessories The monitor is designed for use with the VESA mounting system. 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attaching accessories. VESA Mounting Interface 400 mm 400 mm Mounting accessories can be attached with the monitor in the face down position. T o avoid damaging the s ...

  • NEC MultiSync V652-TM - page 10

    English-8 5. Prevent Tipping When using the display with the optional table top stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the clamps and screws which are included with the optional table top stand. Screw ...

  • NEC MultiSync V652-TM - page 11

    English-9 English P ar ts Name and Functions Contr ol Panel 쐃 PO WER button Switches the power on/off. See also page 18. 쐇 MUTE button Switches the audio mute ON/OFF . 쐋 INPUT button Acts as SET button within OSD menu. (T oggle switches between [DVI], [DPORT], [VGA], [RGB/HV], [HDMI], [DVD/ HD], [SCART], [VIDEO1], [VIDEO2] or [S-VIDEO]). Thes ...

  • NEC MultiSync V652-TM - page 12

    English-10 T erminal Panel From Option control unit 쐃 A C IN connector Connects with the supplied power cord. 쐇 Main P ower Switch On/Off switch to turn main power ON/OFF . 쐋 RGB/HV IN [R, G, B, H, V] (BNC)* T o input analog RGB signals or signals from other RGB equipment. This is also to connect equipment such as a DVD player , HDTV device a ...

  • NEC MultiSync V652-TM - page 13

    English-11 English 씌 Internal speaker 씍 Kensington Loc k For security and theft prevention. * BNC input signal ...

  • NEC MultiSync V652-TM - page 14

    English-12 Wireless Remote Contr ol 쐃 PO WER button Switches the power on/standby . 쐇 INPUT button Selects input signal. DVI: DVI DISPLA YPORT : DPORT VGA: VGA RGB/HV : RGB/HV HDMI: HDMI DVD/HD: DVD/HD, SCART VIDEO: VIDEO1, VIDEO2 S-VIDEO: S-VIDEO OPTION: Depends on your connection 쐋 PICTURE MODE button Selects picture mode, [HIGHBRIGHT], [ST ...

  • NEC MultiSync V652-TM - page 15

    English-13 English Operating Range for the Remote Contr ol Point the top of the remote control toward the LCD monitor ’s remote sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.) from remote control sensor or at a horizontal and vertical angle of within 30° within a distance of about 3.5 m (10 ft.). ? ...

  • NEC MultiSync V652-TM - page 16

    English-14 1. Determine the installation location CA UTION: Installing your LCD monitor must be done by a qualifi ed technician. Contact your dealer for more information. CA UTION: MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY FOUR OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls. CA UTION: Do no ...

  • NEC MultiSync V652-TM - page 17

    English-15 English 5. Switch on the po wer of all the attached external equipment When connected with a computer , switch on the power of the computer fi rst. 6. Operate the attached e xternal equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when required. 8. Adjust the screen (See pages 22 an ...

  • NEC MultiSync V652-TM - page 18

    English-16 Connections NO TE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image. NO TE: Use an audio cable without a built-in resistor . Using an audio cable with a built-in resistor turns down the sound. Before making connections: * First turn off the power of ...

  • NEC MultiSync V652-TM - page 19

    English-17 English Connecting a P ersonal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image. Some video cards with a pixel clock over 162MHz may not display an image correctly . Y our LCD monitor displays proper image by adjusting the factory preset timing signal automatically . <T y ...

  • NEC MultiSync V652-TM - page 20

    English-18 Basic Operation P ower ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NO TE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD. Main Power Switch ON OFF Powe ...

  • NEC MultiSync V652-TM - page 21

    English-19 English Picture Aspect DVI, VGA, RGB/HV , DPORT FULL 1:1 ZOOM NORMAL HDMI, DVD/HD, SCART , VIDEO1, VIDEO2, S-VIDEO FULL WIDE DYNAMIC 1:1 ZOOM NORMAL Aspect ratio of image Unchanged view* 3 Recommended selection for picture aspect* 3 4:3 NORMAL DYNAMIC Squeeze FULL Letterbox WIDE * 3 Grey areas indicate unused portions of the screen. NORM ...

  • NEC MultiSync V652-TM - page 22

    English-20 Inf ormation OSD The Information OSD provides information such as: Monitor ID, Input Source, Picture Size, etc. Press the DISPLA Y button on the remote to bring up the Information OSD.  ID number assigned to current monitor* 1  ID number assigned monitor to be controlled via RS-232C* 2  Input Name  Audio input mode  Pictur ...

  • NEC MultiSync V652-TM - page 23

    English-21 English OSD (On-Screen-Displa y) Contr ols NO TE: Some functions may not be available depending on the model or optional equipment. PICTURE MODE Goto Adjustment S ele c t Return Clos e 70 50 50 50 50 50 THANK YOU FOR SA VING THE ENVIRONMENT . CARBON FOOTPRINT 86.0 % Input source Main Menu Icons Main Menu Item Sub Menu Key Guide Adjustmen ...

  • NEC MultiSync V652-TM - page 24

    English-22 Setting Default PICTURE BACKLIGHT Adjusts the overall image and background brightness. Press + or - to adjust. Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot be changed. 70 CONTRAST Adjusts the image brightness in relationship to the input signal. Press + or - to adjust. Note: When sRGB is selected in p ...

  • NEC MultiSync V652-TM - page 25

    English-23 English H RESOLUTION VGA, RGB/HV inputs only Adjusts the horizontal size of the image. - V RESOLUTION VGA, RGB/HV inputs only Adjusts the vertical size of the image. - INPUT RESOLUTION VGA, RGB/HV inputs only If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. Aft ...

  • NEC MultiSync V652-TM - page 26

    English-24 TIME Confi gures the time for the real-time clock. - DA YLIGHT SA VING Confi gures daylight savings on or of f. OFF RESET Resets the following settings within the SCHEDULE menu back to factory setting: OFF TIMER, SCHEDULE SETTINGS and SCHEDULE LIST . - PIP KEEP PIP MODE Allows the monitor to remain in “PIP” and “TEXT TICKER” mo ...

  • NEC MultiSync V652-TM - page 27

    English-25 English INFORMA TION OSD Selects whether the information OSD is displayed or not. The information OSD will be displayed when the input signal or source changes. The information OSD will also give a warning when there is no-signal or the signal is out-of range. An interval between 3 to 10 seconds for the Information OSD to appear is avail ...

  • NEC MultiSync V652-TM - page 28

    English-26 LAN SETTING When you use this function, EXTERNAL CONTROL should be “LAN”. NOTE: When changing the LAN SETTING, you need to wait several seconds until the LAN SETTING is applied. DHCP Enabling this option automatically assigns an IP address to the monitor from your DHCP server. Disabling this option allows you to register the IP addre ...

  • NEC MultiSync V652-TM - page 29

    English-27 English SECURITY Locks the security password. OFF DDC/CI ENABLE/DISABLE: Turns ON or OFF the two way communication and control of the monitor . ENABLE ALERT MAIL Selects whether or not to send an e-mail notifi cation of monitor error via wired LAN. OFF RESET Resets the following settings within the DISPLA Y PROTECTION menu back to facto ...

  • NEC MultiSync V652-TM - page 30

    English-28 OVER SCAN HDMI, DVD/HD, SCART , VIDEO1, VIDEO2, S-VIDEO inputs only Some video formats may require different scanning modes in order to best display the image. ON ON Image size is larger than what can be displayed. The image edge will appear cropped. Approximately 95% of the image will be shown on the screen. OFF Image size stays within ...

  • NEC MultiSync V652-TM - page 31

    English-29 English NO TE 1: CREA TING A SCHEDULE The schedule function allows the display to be set to power on and off at dif ferent times. Up to seven different schedules can be programmed. T o program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons. Press the SET or the + button to enter the Se ...

  • NEC MultiSync V652-TM - page 32

    English-30 REMO TE CONTROL ID FUNCTION REMO TE CONTROL ID The remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors. For example: if there are many ...

  • NEC MultiSync V652-TM - page 33

    English-31 English 3. Press the “DISPLA Y” button on the remote contr ol while aiming at the “PRIMAR Y” monitor . The Information OSD will be shown at top left side of the screen. Monitor ID: Displays the ID number of the current monitor within the daisy chain. T arget ID: Displays the ID number of the monitor that to be controlled via dais ...

  • NEC MultiSync V652-TM - page 34

    English-32 This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. NO TE: When you use this function, EXTERNAL CONTROL should be “RS-232C” (See page 25). Functions that can be controlled by a personal computer are: • Power ON or OFF . • Switching between input signals. • Sound Mute ON or OFF . Connect ...

  • NEC MultiSync V652-TM - page 35

    English-33 English 2) Control command diagram For other commands, please see “External_Control.pdf” fi le on the CD-ROM. Function (Monitor ID = 1) Code Data Power ON 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0d Power OFF 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 76 0d Input Source Select DisplayPort 01 30 41 30 ...

  • NEC MultiSync V652-TM - page 36

    English-34 Connecting to a Netw ork Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. NO TE: When you use this function, EXTERNAL CONTROL should be “LAN” (See page 25). T o use a LAN connection, you are required to assign an IP address. Example of LAN connection: Server Hu ...

  • NEC MultiSync V652-TM - page 37

    English-35 English Preparation Before Use Connect the monitor to a commercially available LAN cable before engaging in browser operations. Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor , it is possible that items ...

  • NEC MultiSync V652-TM - page 38

    English-36 Alert Mail Setting http://<the Monitor ’s IP address>/lanconfi g.html This option notifi es your computer of an error message via e-mail when using wired LAN. An error message notifi cation will be sent when an error occurs in the monitor . Alert Mail Checking [ENABLE] will turn on the Alert Mail feature. Checking [DISABLE] wi ...

  • NEC MultiSync V652-TM - page 39

    English-37 English Alert error message list Error n umber * ErrorCode Alert mail Message Explanation Measure 70h ~ 7Fh The monitor ’s power supply is not functioning normally . Standby power Abnormal Please contact your supplier . 80h ~ Fh The cooling fan has stopped. Cooling fan Abnormal Please contact your supplier . 90h ~ 9Fh The monitor ’s ...

  • NEC MultiSync V652-TM - page 40

    English-38 Reduced Footprint: Provides the ideal solution for environments with superior image quality . Color Control Systems: Allow you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards. OmniColor: Combines Six-axis color control and the sRGB standard. Six-axis color control permits col ...

  • NEC MultiSync V652-TM - page 41

    English-39 English No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check the main Power Switch, it should be in the ON position. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a ...

  • NEC MultiSync V652-TM - page 42

    English-40 Either light vertical or horizontal stripes may appear , depending on the specifi c display pattern. This is no product fault or degradation. Snowy Picture, P oor Sound in TV • Check antenna/cable connection. Use new cable if necessary . Interference in TV • Check components for shielding, move away from monitor if necessary . RS-23 ...

  • NEC MultiSync V652-TM - page 43

    English-41 English Specifi cations Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 64.5”/1639.0 mm diagonal 0.744 mm 1920 x 1080 Over 1073 million colors (depending on video card used) 430 cd/m 2 (Max.), 310 cd/m 2 (Factory setting T yp.) @25°C 4000:1 87° (typ) @ CR>10 Frequency ...

  • NEC MultiSync V652-TM - page 44

    English-42 1) RS-232C input/output 1 6 5 9 D-SUB 9P Pin No Name 1N C 2 RXD 3 TXD 4N C 5 GND 6N C 7N C 8N C 9N C This LCD monitor uses RXD, TXD and GND lines for RS-232C control. 2) REMOTE IN Pin Assignment ...

  • NEC MultiSync V652-TM - page 45

    English-43 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help defi ne and comply with the latest independent ...

メーカー NEC カテゴリー Monitor

NEC MultiSync V652-TMのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MultiSync V652-TMの取扱説明書
- NECの製品カード
- パンフレット
- またはNEC MultiSync V652-TMの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、NEC MultiSync V652-TMの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、NEC MultiSync V652-TMの取り付け説明書、サービスマニュアル、簡易説明書、またはNEC MultiSync V652-TMのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、NEC MultiSync V652-TMの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

NEC MultiSync V652-TMデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNEC MultiSync V652-TMを使用するのを助ける技術的文書のことです。説明書は通常、全てのNEC MultiSync V652-TMユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

NECの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. NEC MultiSync V652-TMの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNEC MultiSync V652-TMの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。NEC MultiSync V652-TMに関してこのドキュメントで見つけることができる全てのヒントの目次
3. NEC MultiSync V652-TMデバイスの基本機能を使うにあたってのヒント。 NEC MultiSync V652-TMのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。NEC MultiSync V652-TMに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNEC MultiSync V652-TMのメーカー/サービスへの連絡先に関する情報。

NEC MultiSync V652-TMについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもNEC MultiSync V652-TMの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNEC MultiSync V652-TMで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)