Frymaster KFC-1 SMSの取扱説明書

42ページ 2.15 mb
ダウンロード

ページに移動 of 42

Summary
  • Frymaster KFC-1 SMS - page 1

    Frymaster, a member of the Co mmercial Food Equipment Serv ice Association, recommends using CFESA Certified Tec hnicians. 24-Hour Service Hotline 1-800-551-8633 FEB 2001 8195733 KFC-1 SMS Cooking Computer USER GUIDE ...

  • Frymaster KFC-1 SMS - page 2

    1- 1 KFC-1 SMS COMPUTER CHAPTER 1: IMPORTANT INFORMATION 1.1 General The KFC-1 SMS Cooking Computer is designed to operate with both full- and split-pot fryers. For a full-pot fryer, turn the computer on by pressing either switch. For split-pot fryers, press the left switch to operate the left pot and the right switch to operate the right pot. The ...

  • Frymaster KFC-1 SMS - page 3

    1- 2 1.3 KFC-1 SMS Computer Controls KFC-1 SMS Computer Button Function On/Off Turns the fryer ON and OFF. For a full-pot fryer, press either ON/OFF switch to turn the computer on. For a split-pot fryer, press the left ON/OFF switch to operate the left pot and press the right ON/OFF switch to operate the right pot. Product Buttons Each of the 10 pr ...

  • Frymaster KFC-1 SMS - page 4

    1- 3 1.3 KFC-1 SMS Computer Controls (cont.) Button Function Program Scan Shows the remaining cook time for other active cook cycles when operating in the multiple cook cycle mode. In programming mode, this button activates programming mode, and advances through the programming steps. Enter Shows the remaining cook time. In programming mode, this b ...

  • Frymaster KFC-1 SMS - page 5

    1- 4 1.4 Morning (AM) Polishing Cycle 1 2 3 4 5 Computer display changes to PLSH. When the fryer reaches filtration setpoint, the display alternates between START and PLSH. Press EXIT/COOL FILTER button on computer face. Assemble filter. Sprinkle 8 ounces of filter powder over filter paper in filter pan. Open drain valve. Turn pump ON. Computer dis ...

  • Frymaster KFC-1 SMS - page 6

    1- 5 1.4 Morning (AM) Polishing Cycle (cont.) 6 Computer counts down. Polishing lasts 30 minutes. 7 8 9 10 Computer displays FILL and an alarm sounds. Press Exit/Cool Filter to shut off alarm. Cool appears in right display. Press EXIT/COOL FILTER button Computer displays oil temperature and fryer heats to setpoint. Fryer displays drop when it’s a ...

  • Frymaster KFC-1 SMS - page 7

    1- 6 1.5 Afternoon (PM) Polishing Cycle 1 Assemble filter. Sprinkle filter powder over filter paper in filter pan. 2 3 4 At 2 p.m. an alarm sounds and computer display alternates between START and PLSH. Press EXIT/COOL FILTER button on computer face to shut off alarm. Open drain valve. Turn pump ON. Computer displays PLSH 30:00 to polish shortening ...

  • Frymaster KFC-1 SMS - page 8

    1- 7 1.5 Afternoon (PM) Polishing Cycle (cont.) 5 Computer counts down. 6 7 8 9 At the end of the polishing cycle, the computer displays FILL and an alarm sounds. Press Exit/Cool Filter to shut off alarm. COOL appears in right display. Computer displays LOW and fryer heats to setpoint. Fryer displays DROP when oil/shortening temperature is at setpo ...

  • Frymaster KFC-1 SMS - page 9

    1- 8 1.6 Delaying Afternoon (PM) Polishing Cycle 1 2 3 4 5 Press any program button. The fryer will cook normally until the preprogrammed delay period expires. The polish can only be delayed once. Polish must be performed within three-hour period or the controller will go into polish lockout. At 2 p.m. an alarm sounds and computer display alternate ...

  • Frymaster KFC-1 SMS - page 10

    1- 9 1.7 Using Polish Now Feature 1 2 Assemble filter. Sprinkle 8 ounces of filter powder over filter paper in filter pan. 3 4 Computer displays START and PLSH. 5 Computer display alternates between DYPL and temperature display, indicating the polish cycle has been delayed. Press and hold both EXIT/COOL FILTER buttons on computer face. Press EXIT/C ...

  • Frymaster KFC-1 SMS - page 11

    1- 10 1.7 Using Polish Now Feature (cont.) 6 7 Computer counts down 8 9 10 Computer displays FILL and an alarm sounds. Press Exit/Cool Filter to cancel alarm. Press EXIT/COOL FILTER button to exit COOL mode. Open drain valve. Turn pump on. Computer displays PLSH 30:00 to polish shortening for 30 min. Close drain valve. Pump shortening into frypot. ...

  • Frymaster KFC-1 SMS - page 12

    1- 11 1.7 Using Polish Now Feature (cont.) 11 1.8 Operating Instructions 1 2 Computer displays LOW and fryer heats to setpoint. Fryer displays DROP when oil/shortening temperature is at setpoint and ready to cook. Fryer is heating. Turn the fryer ON for cooking operations. If HEAT light alternates on and off, it indicates the fryer is in the melt c ...

  • Frymaster KFC-1 SMS - page 13

    1- 12 1.8 Operating Instructions (cont.) 3 4 5 6 Computer displays LOW. Select a product, i.e. product 4. Fryer heats to preset temperature. Oil temperature at 255 °F (124 °C). Actual oil temperature will be displayed until oil temperature is within ±2 °F (±1 °C) of setpoint temperature (SET--TEMP). Computer displays DROP. Drop product into f ...

  • Frymaster KFC-1 SMS - page 14

    1- 13 1.8 Operating Instructions (cont.) 7 8 9 Computer displays DONE and an alarm sounds. Cook cycle is complete. Pressing the flashing product number will stop the alarm and return the fryer to selected standby cycle mode (COOL, SET--TEMP, FILTER). Computer displays COOL indicating oil/shortening has cooled to a standby temperature of 250 °F (12 ...

  • Frymaster KFC-1 SMS - page 15

    1- 14 1.8 Operating Instructions (cont.) 10 11 To begin the filtering cycle, close drain valve. Computer will display FILL. Turn filter pump on and allow frypot to refill. After bubbles appear in frypot for 15 seconds, close return valve and turn filter pump OFF. Press EXIT/COOL FILTER button to clear lockout and FILL message. Computer will display ...

  • Frymaster KFC-1 SMS - page 16

    2- 1 KFC-1 SMS COMPUTER CHAPTER 2: PROGRAMMING INSTRUCTIONS 2.1 General The KFC-1 SMS Computer arrives with a default program loaded in its nonvolatile memory. Nonvolatile memory retains product-cooking instructions so this information will not be lost if there is a power surge or outage. To begin programming, ensure the computer is OFF on each sid ...

  • Frymaster KFC-1 SMS - page 17

    2- 2 2.2.1 Programming for Extra Tasty Crispy Chicken Enter Programming Mode as outlined in Section 2.2 1 2 3 4 Computer displays PRODUCT. Press button #1 for product. Computer displays HEADS. Press button #4 to set head count to "4". Press ENTER for next step. Computer displays INTERVAL in the left display and PROD 1 in the right display ...

  • Frymaster KFC-1 SMS - page 18

    2- 3 2.2.1 Programming for Extra Tasty Crispy Chicken (cont.) 5 6 7 8 Computer displays SET--TEMP. Enter 3 4 0, in that sequence. Press ENTER to save 340 °F (171 °C) as set-- temp for interval #1. Computer displays FLEX. Press button #0 to set straight time cooking mode. Press ENTER to lock in setting. Computer displays INTERVAL in the left displ ...

  • Frymaster KFC-1 SMS - page 19

    2- 4 2.2.1 Programming for Extra Tasty Crispy Chicken (cont.) 9 10 11 12 Computer displays SET--TEMP. Enter 3 1 0, in that sequence. Press ENTER to save 310 °F (154 °C) as set-- temp for interval #2. Computer displays FLEX. Press button #0 to set straight time cooking mode. Press ENTER to lock in setting. Computer displays INTERVAL in the left di ...

  • Frymaster KFC-1 SMS - page 20

    2- 5 2.2.1 Programming for Extra Tasty Crispy Chicken (cont.) 13 14 15 16 Computer displays SET--TEMP. Enter 3 3 0, in that sequence. Press ENTER to save 330 °F (166 °C) as set-- temp for interval #2. Computer displays FLEX. Press button #0 to set straight time cooking mode. Press ENTER to lock in setting. Computer displays INTERVAL in the left d ...

  • Frymaster KFC-1 SMS - page 21

    2- 6 2.2.1 Programming for Extra Tasty Crispy Chicken (cont.) 17 18 Computer displays PREALM 2. Enter 0 0, in that sequence. Press PROG SCAN button to advance to Exit Cycle program mode. Computer displays EX-CYCLE in the left display and SET--TEMP in the right display. Press TEMP button to toggle between SET--TEMP, COOL AND FILTER. Stop selection a ...

  • Frymaster KFC-1 SMS - page 22

    2- 7 2.2.1 Programming for Extra Tasty Crispy Chicken (cont.) 19 20 21 Computer displays NUM FILT. Press button #1 to select Filter Lockout mode of "1". Press ENTER to set Filter Lockout Mode of "1". Computer displays INTERVAL in the left display and PROD 1 in the right display. Press TEMP button to exit Product #1 programming. ...

  • Frymaster KFC-1 SMS - page 23

    2- 8 2.2.2 Programming for Colonel’s Crispy Strips Enter Programming Mode as outlined in Section 2.2 1 2 3 4 Computer displays PRODUCT. Press button #2 for product. Computer displays HEADS. Press button #0 to set head count to "0". Press ENTER for next step. Computer displays INTERVAL in the left display and PROD 2 in the right display. ...

  • Frymaster KFC-1 SMS - page 24

    2- 9 2.2.2 Programming for Colonel’s Crispy Strips (cont.) 5 6 7 8 Computer displays SET--TEMP. Enter 3 4 0, in that sequence. Press ENTER to save 340 °F (171 °C) as set-- temp for interval #1. Computer displays FLEX. Press button #3 to set flex mode = "3". Press ENTER to lock in setting. Computer displays INTERVAL in the left display ...

  • Frymaster KFC-1 SMS - page 25

    2- 10 2.2.2 Programming for Colonel’s Crispy Strips (cont.) 9 10 11 12 Computer displays PREALM 2. Press PROG SCAN button to advance to Exit Cycle program mode. Computer displays EX-CYCLE in the left display and SET--TEMP in the right display. Press ENTER button to save default setting of SET--TEMP. Computer displays INTERVAL in the left display ...

  • Frymaster KFC-1 SMS - page 26

    2- 11 2.2.3 Programming for Hot Wings/Hot BBQ Wings Enter Programming Mode as outlined in Section 2.2 1 2 3 4 Computer displays PRODUCT. Press button #3 for product. Computer displays HEADS. Press button #0 to set head count to "0". Press ENTER for next step. Computer displays INTERVAL in the left display and PROD 3 in the right display. ...

  • Frymaster KFC-1 SMS - page 27

    2- 12 2.2.3 Programming for Hot Wings/Hot BBQ Wings (cont.) 5 6 7 8 Computer displays SET--TEMP. Enter 3 4 0, in that sequence. Press ENTER to save 340 °F (171 °C) as set-- temp for interval #1. Computer displays FLEX. Press button #3 to set flex mode = "3". Press ENTER to lock in setting. Computer displays INTERVAL in the left display ...

  • Frymaster KFC-1 SMS - page 28

    2- 13 2.2.3 Programming for Hot Wings/Hot BBQ Wings (cont.) 9 10 11 12 Computer displays PREALM 2. Press PROG SCAN button to advance to Exit Cycle program mode. Computer displays EX-CYCLE in the left display and SET--TEMP in the right display. Press ENTER button to save default setting of SET--TEMP. Computer displays INTERVAL in the left display an ...

  • Frymaster KFC-1 SMS - page 29

    2- 14 2.2.4 Programming for Potato Wedges Enter Programming Mode as outlined in Section 2.2 1 2 3 4 Computer displays PRODUCT. Press button #4 or #5 for product. Computer displays HEADS. Press button #0 to set head count to "0". Press ENTER for next step. Computer displays INTERVAL in the left display and PROD 4 or 5 in the right display. ...

  • Frymaster KFC-1 SMS - page 30

    2- 15 2.2.4 Programming for Potato Wedges (cont.) 5 6 7 8 Computer displays SET--TEMP. Enter 3 4 0, in that sequence. Press ENTER to save 340 °F (171 °C) as set-- temp for interval #1. Computer displays FLEX. Press button #3 to set flex mode = "3". Press ENTER to lock in setting. Computer displays INTERVAL in the left display and PROD 4 ...

  • Frymaster KFC-1 SMS - page 31

    2- 16 2.2.4 Programming for Potato Wedges (cont.) 9 10 11 12 Computer displays PREALM 2. Press PROG SCAN button to advance to Exit Cycle program mode. Computer displays EX-CYCLE in the left display and SET--TEMP in the right display. Press ENTER button to save default setting of SET--TEMP. Computer displays INTERVAL in the left display and PROD 4 o ...

  • Frymaster KFC-1 SMS - page 32

    2- 17 2.2.5 Programming for Sandwiches/Filets Enter Programming Mode as outlined in Section 2.2 1 2 3 4 Computer displays PRODUCT. Press button #6 or #7 for product. Computer displays HEADS. Press button #0 to set head count to "0". Press ENTER for next step. Computer displays INTERVAL in the left display and PROD 6 or 7 in the right disp ...

  • Frymaster KFC-1 SMS - page 33

    2- 18 2.2.5 Programming for Sandwiches/Filets (cont.) 5 6 7 8 Computer displays SET--TEMP. Enter 3 4 0, in that sequence. Press ENTER to save 340 °F (171 °C) as set-- temp for interval #1. Computer displays FLEX. Press button #3 to set flex mode = "3". Press ENTER to lock in setting. Computer displays INTERVAL in the left display and PR ...

  • Frymaster KFC-1 SMS - page 34

    2- 19 2.2.5 Programming for Sandwiches/Filets (cont.) 9 10 11 12 Computer displays PREALM 2. Press PROG SCAN button to advance to Exit Cycle program mode. Computer displays EX-CYCLE in the left display and SET--TEMP in the right display. Press ENTER button to save default setting of SET--TEMP. Computer displays INTERVAL in the left display and PROD ...

  • Frymaster KFC-1 SMS - page 35

    2- 20 2.2.6 Programming for Popcorn Chicken Enter Programming Mode as outlined in Section 2.2 1 2 3 4 Computer displays PRODUCT. Press button #8 for product. Computer displays HEADS. Press button #0 to set head count to "0". Press ENTER for next step. Computer displays INTERVAL in the left display and PROD 8 in the right display. Press bu ...

  • Frymaster KFC-1 SMS - page 36

    2- 21 2.2.6 Programming for Popcorn Chicken (cont.) 5 6 7 8 Computer displays SET--TEMP. Enter 3 4 0, in that sequence. Press ENTER to save 340 °F (171 °C) as set-- temp for interval #1. Computer displays FLEX. Press button #3 to set flex mode = "3". Press ENTER to lock in setting. Computer displays INTERVAL in the left display and PROD ...

  • Frymaster KFC-1 SMS - page 37

    2- 22 2.2.6 Programming for Popcorn Chicken (cont.) 9 10 11 12 Computer displays PREALM 2. Press PROG SCAN button to advance to Exit Cycle program mode. Computer displays EX-CYCLE in the left display and SET--TEMP in the right display. Press ENTER button to save default setting of SET--TEMP. Computer displays INTERVAL in the left display and PROD 8 ...

  • Frymaster KFC-1 SMS - page 38

    3- 1 KFC-1 SMS COMPUTER CHAPTER 3: ADDITIONAL COMPUTER SETTINGS 3.1 Programming for Shortening Management Listed below are procedures for initiating the Shortening Management System software and setting local time, daylight savings time and stagger between polishings. Setting Stagger Time prevents frypots in the same battery from entering a “Poli ...

  • Frymaster KFC-1 SMS - page 39

    3- 2 3.2 Setting Daylight Savings Time/Stagger Between Polishings 1 2 3 Enter Code #: 1 6 5 5, in that sequence. Press ON/OFF button to turn computer OFF. Press PROG SCAN button to enter CODE. Computer displays CODE in the left display and (Blank) in the right display. As each number is entered, dashes appear in the right display. The computer is r ...

  • Frymaster KFC-1 SMS - page 40

    3- 3 4 3.3 Setting Local Time 1 2 Enter Code #: 2 0 0 0, in that sequence. Press ON/OFF button to turn computer OFF. Press PROG SCAN button to enter CODE. Computer displays CODE in the left display and (Blank) in the right display. As each number is entered, dashes appear in the right display. The computer is ready for time entry after the last num ...

  • Frymaster KFC-1 SMS - page 41

    3- 4 3 4 Example: Computer displays SET TIME in left display and 00:00 in right display. Enter correct time (military style) using product selection keys. To enter 8:00 AM, enter 0 8 0 0, in that sequence. Press ENTER to set time. To enter 4:00 PM, enter 1 6 0 0, in that sequence. Press ENTER to set time. ...

  • Frymaster KFC-1 SMS - page 42

    Frymaster, L.L.C. 8700 Line Avenue, Shreveport, Louisiana USA 71106 Service Center (800) 551-8633 or (318) 865-1711 Printed in the United States of America 819-5733 English 02/01 ...

メーカー Frymaster カテゴリー Kitchen Entertainment Center

Frymaster KFC-1 SMSのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- KFC-1 SMSの取扱説明書
- Frymasterの製品カード
- パンフレット
- またはFrymaster KFC-1 SMSの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Frymaster KFC-1 SMSの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Frymaster KFC-1 SMSの取り付け説明書、サービスマニュアル、簡易説明書、またはFrymaster KFC-1 SMSのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Frymaster KFC-1 SMSの製品を使用するにあたって最も人気のある説明書を閲覧できます。

Frymaster KFC-1 SMSデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがFrymaster KFC-1 SMSを使用するのを助ける技術的文書のことです。説明書は通常、全てのFrymaster KFC-1 SMSユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Frymasterの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Frymaster KFC-1 SMSの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははFrymaster KFC-1 SMSの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Frymaster KFC-1 SMSに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Frymaster KFC-1 SMSデバイスの基本機能を使うにあたってのヒント。 Frymaster KFC-1 SMSのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Frymaster KFC-1 SMSに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるFrymaster KFC-1 SMSのメーカー/サービスへの連絡先に関する情報。

Frymaster KFC-1 SMSについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもFrymaster KFC-1 SMSの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがFrymaster KFC-1 SMSで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)