Kenwood DPF-2030の取扱説明書

24ページ 0.8 mb
ダウンロード

ページに移動 of 24

Summary
  • Kenwood DPF-2030 - page 1

    CD PLA YER B60-4517-08 (EN) INSTRUCTION MANUAL KENW OOD CORPORA TION DPF-1030 DPF-2030 ...

  • Kenwood DPF-2030 - page 2

    2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. Australia .................................................................................. A C 240 V only Europe and U.K. ..................................................................... AC 230 V only *Other co ...

  • Kenwood DPF-2030 - page 3

    3 Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee ...

  • Kenwood DPF-2030 - page 4

    4 Caution : Read this page carefully to ensure safe operation. IMPORT ANT SAFEGUARDS 10. Cleaning – Unplug this appliance from the wall outlet before cleaning. Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth. 1 1 . Lightning – For added protection for this appli ...

  • Kenwood DPF-2030 - page 5

    5 ...

  • Kenwood DPF-2030 - page 6

    6 System connections Caution: Do not plug in the power lead until all connections are com- pleted. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections hav e been made pr oper ly , r eset the microcomputer referring to “In case of difficulty”. ™ Make connections as sho wn below . W ...

  • Kenwood DPF-2030 - page 7

    7 Adjusting the output levels of the output jacks and headphone output (only for DPF-2030) The OUTPUT level (UP/DOWN) keys of the remote control unit can adjust the output levels from the LINE/OUT jacks and PHONES jack (DPF-2030 only) of the unit. T o use the headphone (only for DPF-2030) Connect a stereo headphone to the PHONES jack of the CD play ...

  • Kenwood DPF-2030 - page 8

    8 SYSTEM CONTROL SYSTEM CONTROL SYSTEM CONTROL SYSTEM CONTROL SYSTEM CONTROL Notes Notes SYSTEM CONTROL CONNECTIONS Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. This unit is compatible only with the [SL16] mode. The system con- trol operation is no ...

  • Kenwood DPF-2030 - page 9

    9 Maintenance Be specially cautious against condensation in a following circumstance: When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc. Caution on condensation Condensation (of dew) may occur inside the unit when there is a great dif ...

  • Kenwood DPF-2030 - page 10

    10 TRACK EDIT CCRS TRACK NO. P.C. TOTAL TIME SINGLE TIME 6 1 11 16 7 2 12 17 8 3 13 18 9 4 14 19 10 5 15 20 PGM A B REPEAT 8 _ : 8 88 8 8 POWER - ON – OFF PHONES P.MODE EDIT CHECK CLEAR PEAK SEARCH TIME DISPLAY OPEN/CLOSE REPEAT RANDOM 0 76 4¢  1¡  1 * 90 ! @ # $ % ^ & 23 4 5 6 7 8 Controls and indicators CCRS indicator Pause indicato ...

  • Kenwood DPF-2030 - page 11

    11 Operation of remote control unit (DPF-2030 only) 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones. 3. Malfunction ma y occur if direct sunlight or the light of a ...

  • Kenwood DPF-2030 - page 12

    12 Normal play (TRACK mode) 2 Load a disc. 3 Start playback. 1 Open the tray. Use the following procedure to play a CD in the original order of tracks from track No. 1. : Keys and control used in the operations described on this page. 3 Close the tray. Playing tracks in order from track No. 1 ÷ Playback starts when a disc has been loaded. T o paus ...

  • Kenwood DPF-2030 - page 13

    13 Playback from desired track (except for DPF-1030) (Remote control unit only) Press the numeric keys as shown below.... To enter track No. 23 : 003 To enter track No. 40 : 0000) ÷ Playback starts from the selected track and continues on the subse- quent tracks. Skipping tracks ÷ The track in the direction of the pressed key is skipped, and the ...

  • Kenwood DPF-2030 - page 14

    14 Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 20 tracks) ÷ Load a disc in the CD player. @ Press so that the “PGM” indicator lights. Program desired tracks. 1 2 Preparation : Keys and control used in the operations described on this page. ÷ The programmed contents remain in memo ...

  • Kenwood DPF-2030 - page 15

    15 ÷ When a track No. is selected, the track will be added to the end of the existing program. Press to clear tracks from the end. T o check or change the programmed tracks T o clear tracks from the program 1 Pr ess the CHECK ke y . Press until the track No. to be changed is displayed. 2 Select the new track No. Auto space function During programm ...

  • Kenwood DPF-2030 - page 16

    16 Repeated playback T o repeat only the programmed tracks : Keys and control used in the operations described on this page. ™ Preparation T o cancel repeated playback Press the REPEA T ke y again. Lights up. 1 Press so that the "PGM" indicator lights. 2 Select the desired track No. 5 Switch REPEAT ON. 6 Start playback. 4 Repeat steps 2 ...

  • Kenwood DPF-2030 - page 17

    17 T o repeat the entire disc 1 Press so that the “TRACK” indicator lights. 2 Switch REPEAT ON. 3 Start playback. T o cancel repeated playback Press the REPEA T ke y again. : Keys and control used in the operations described on this page. Goes off. Lights up. Lights up. 0 76 4¢  1¡  0 0 0 0 REPEAT 6 REPEAT P.MODE TRACK TRACK NO. 01 TRAC ...

  • Kenwood DPF-2030 - page 18

    18 The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing Preparation : Keys and control used in the operations described on this page. 1 Light the “EDIT” indicator. 2 Go to step 2 within 5 seconds. If more than 5 seconds have elapsed, pr ...

  • Kenwood DPF-2030 - page 19

    19 : Keys and control used in the operations described on this page. Press any one of these keys. ÷ The edited data is cleared entirely. T o clear the edited contents ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B. ÷ The "P.C." indicator goes off in a few se ...

  • Kenwood DPF-2030 - page 20

    20 Playback in a random order (Random playback) ÷ Pressing the 4 key once returns to the beginning of the track being played. ÷ Press the RANDOM key to start normal playback. ™ As tracks are selected at random, you can enjoy listening to for a long time. ÷ Load a disc in the CD player. @ Preparation T o select another track in the middle of pl ...

  • Kenwood DPF-2030 - page 21

    21 12 F 00 0 76 4¢  1¡  T imer operations Timer playbac k of CD can be started at an y time using an audio timer which is available in audio stores. Preparation ÷ Connect the power cords of the associated components so that their power can be turned ON through the audio timer. (Also, be sure to read carefully the instruction manual of the ...

  • Kenwood DPF-2030 - page 22

    22 ÷ Insert the power plug firmly to the AC outlet. ÷ Turn the amplifier’s power ON. ÷ Load the disc again with its label side up. ÷ Insert the disc properly . ÷ Wipe off the dust on the surface of the disc referring to “Disc handling precautions”. 9 ÷ Replace the disc with a new one. ÷ Leave the player for about 1 hour so that the con ...

  • Kenwood DPF-2030 - page 23

    23 Specifications [ Format ] System ..................................................................................... Compact disc digital audio system Laser ................................................................................................................ Semiconduc tor laser [ D/A Conv ertors ] D/A Conversion ................... ...

  • Kenwood DPF-2030 - page 24

    For your records Record the serial number , f ound on the back of the unit, in the spaces designated on the war ranty card, and in the space provided below . Ref er to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number ...

メーカー Kenwood カテゴリー CD Player

Kenwood DPF-2030のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- DPF-2030の取扱説明書
- Kenwoodの製品カード
- パンフレット
- またはKenwood DPF-2030の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Kenwood DPF-2030の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Kenwood DPF-2030の取り付け説明書、サービスマニュアル、簡易説明書、またはKenwood DPF-2030のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Kenwood DPF-2030の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Kenwood DPF-2030デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがKenwood DPF-2030を使用するのを助ける技術的文書のことです。説明書は通常、全てのKenwood DPF-2030ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Kenwoodの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Kenwood DPF-2030の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははKenwood DPF-2030の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Kenwood DPF-2030に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Kenwood DPF-2030デバイスの基本機能を使うにあたってのヒント。 Kenwood DPF-2030のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Kenwood DPF-2030に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるKenwood DPF-2030のメーカー/サービスへの連絡先に関する情報。

Kenwood DPF-2030についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもKenwood DPF-2030の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKenwood DPF-2030で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)