Palsonic 3410の取扱説明書

21ページ 0.17 mb
ダウンロード

ページに移動 of 21

Summary
  • Palsonic 3410 - page 1

    PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 34CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 3410 OWNER'S MANUAL Type Tested Electrical Safety AS/NZS 3250 Lic 4163 Standards Australia APP No: N15957 ...

  • Palsonic 3410 - page 2

    Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents Main features .......................................... ...

  • Palsonic 3410 - page 3

    . . . . . . . . . . . Main features Hyperband. Auto/manual search. Voltage synthesised system 100 preset channels. TV system: PAL-B/G, NTSC-4.43/3.58 (AV). Full function remote control & English on screen menu display No-signal blue background display and AUTO-POWER-OFF function. Four picture mode settings. Sound mute function. Sleep timer. AV ...

  • Palsonic 3410 - page 4

    NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. * Please follow caution ...

  • Palsonic 3410 - page 5

    Installation and appearance Antenna connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the power switch on the TV while connectin ...

  • Palsonic 3410 - page 6

    Appearance Front view POWER SWITCH REMOTE SENSOR INDICATOR Note: Functions of MENU, , VOL , CH and TV/AV are also provided to the remote controller. Back view AV IN/OUT ANTENNA INPUT 5 CH (up) CH (down) MENU TV/AV VOL (down) VOL (up) ...

  • Palsonic 3410 - page 7

    The remote controller Standby Channel direct select Sleep timer Picture mode selection *Sound system select Previous channel On screen recall Colour system select Picture control Volume control Channel select * NOTE: this TV model's RF sound system is BG only. Therefore the SYS1/2 button on the remote controller is ineffective in sound system ...

  • Palsonic 3410 - page 8

    Press again Operation Turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right corner of the screen will display channel number, co ...

  • Palsonic 3410 - page 9

    8 1. PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. Press the CH button to select the item (the selected item is highlighted in red). Press the VOL button to adjust it. The range is 0-63. Press the MENU button to exit to the ...

  • Palsonic 3410 - page 10

    Making use of the PRESET menu can fulfil the function of auto-search, search. manual search , channel and band selection. AFT and skip on/off. Press CH button to select the item. (the selected item is highlighted in red). Press the MENU button to exit to the main menu. 1) PROG (program) Select the current program number while "PROG" is hi ...

  • Palsonic 3410 - page 11

    5) SYS (sound system) This item is used to select sound system. Since this TV model’s RF sound system is B/G only, this item gets into ineffectiveness in sound system selection. 6) Auto - search (AUTO) Press CH button to highlight AUTO . Press VOL button the set will automatically search and store the active TV signals in your local area from low ...

  • Palsonic 3410 - page 12

    2) SYS (sound system) selection. In this TV model this item is ineffective. (Refer to the NOTE on page 6) 3) BLUE ON/OFF selection. Select and highlight BLUE ON/OFF . Press VOL button to select ON or OFF. When "BLUE ON" is selected, blue background will appear on the screen automatically when no input signals, and the sound is mute. After ...

  • Palsonic 3410 - page 13

    l.......... Press " " Press " " BRIGHTNESS 0 Picture and volume adjustment 1. Picture adjustment Press PIC button repeatedly, on-screen display will change in the sequence below PAL BRIGHTNESS CONTRAST COLOUR SHARPNESS NTSC BRIGHTNESS CONTRAST COLOUR TINT SHARPNESS Press VOL button to adjust the level. For example, to adjust bri ...

  • Palsonic 3410 - page 14

    13 MILD Picture mode selection You can select the picture quality instantly among three presets modes and one user-set mode. Press the button to select the desired picture quality. DYNAMIC, STANDARD, MILD and MEMORY (user-set) can be selected cyclically. MEMORY DYNAMIC STANDARD Brightness Colour Contrast Tint Sharpness DYNAMIC 31 31 47 31 31 STANDA ...

  • Palsonic 3410 - page 15

    : 14 COLOUR SYSTEM Colour Sub-Carrier Vertical Frequency PAL (RF/VIDEO) 4.43MHz 50Hz AUTO NTSC 3.58 (VIDEO) 3.58MHz 60Hz 50Hz PAL PAL 60 (VIDEO) N358 NTSC 3.58 (VIDEO) 4.43MHz 4.43MHz 3.58MHz 60Hz 60Hz PAL (RF/VIDEO) NTSC 4.43 (VIDEO) 4.43MHz 60Hz N443 3. SLEEP timer Using the SLEEP button allows you to have the appliance automatically turned off a ...

  • Palsonic 3410 - page 16

    15 Note: 1) When receiving broadcasting TV program (the TV signals are input through aerial terminal), press the AV button to switch the set to TV mode. 2) When receiving programs played back by Video DISC, VCR, Satellite receiver, VCD (the signals are input through AV terminals), please set the receiver to AV mode. 12 PAL AV PAL Press AV Press AV ...

  • Palsonic 3410 - page 17

    Press AV button on the remote control unit to set TV mode, and choose the desired channel. At this time, the program recorded is displayed on the screen. Note: the following mis-operation should be avoided during recording. * Press STANDBY button or set to VIDEO mode. * Change the current channel accidentally. NOTE: The VIDEO equipment may be VCR, ...

  • Palsonic 3410 - page 18

    Press AV button on the remote control unit to select AV mode before dubbing, "AV" will be displayed on the screen. The TV set will act as a monitor to help you edit while dubbing. NOTE: The set MUST remain in Video mode and MUST NOT be switched off during the session. 17 3. DUBBING The picture below shows how to connect TWO VCRs to the TV ...

  • Palsonic 3410 - page 19

    TROUBLE SHOOTING Symptoms Check these things Try these adjustment No picture, no sound. Be sure power cord is plugged in. May be station trouble. Check antenna connections. Maybe in AV mode. Press POWER BUTTON Try another channel. Press AV button once. Poor sound, picture OK. May be station trouble. May be local interference from another appliance. ...

  • Palsonic 3410 - page 20

    SPECIFICATIONS Power Supply Receiver Channel Cable Channel TV System Dimension (mm) Weight CRT Power Consumption Antenna Impedance Remote Control Unit Power Supply Accessories Note : Design and specifications are subject to change without notice. : AC 240V, 50Hz : VHFL 0~5, 5A; VHFH 6~11; UHF E21-E69 : S1-S41 (Hyperband) : PAL-B/G, NTSC 3.58 /4.43 ...

  • Palsonic 3410 - page 21

    PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-37H03-09 ...

メーカー Palsonic カテゴリー CRT Television

Palsonic 3410のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 3410の取扱説明書
- Palsonicの製品カード
- パンフレット
- またはPalsonic 3410の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Palsonic 3410の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Palsonic 3410の取り付け説明書、サービスマニュアル、簡易説明書、またはPalsonic 3410のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Palsonic 3410の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Palsonic 3410デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPalsonic 3410を使用するのを助ける技術的文書のことです。説明書は通常、全てのPalsonic 3410ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Palsonicの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Palsonic 3410の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPalsonic 3410の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Palsonic 3410に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Palsonic 3410デバイスの基本機能を使うにあたってのヒント。 Palsonic 3410のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Palsonic 3410に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPalsonic 3410のメーカー/サービスへの連絡先に関する情報。

Palsonic 3410についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPalsonic 3410の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPalsonic 3410で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)