English dropdown-ico

Manual Airlink AP431W

14 pages 0.7 mb
Download

Go to site of 14

Summary
  • Airlink AP431W - page 1

    Ve r. 1 A Quick Inst allation Guide Model # AP431W Super G™ Multi-Functional Wireless Access Point ...

  • Airlink AP431W - page 2

    Getting S tarted This Quick Installation Guide only provides basic instructions. For more detailed information, please refer to the User ’ s Manual in the supplied CD. Please refer to the following diagrams to determine which operating mode you should use for your network. If you want to use the AP431W as an Access Point with minimal configuratio ...

  • Airlink AP431W - page 3

    Step 1 Connect one end of a network cable to the Network port of the Access Point and connect the other end to one of the LAN ports of the router (See the diagram below) . Step 2 Power on the Access Point by connecting one end of the supplied power adapter to the power jack of the Access Point and connecting the other end to an electrical outlet. S ...

  • Airlink AP431W - page 4

    Section 3 Gathering Information Step 1 From a computer connected to the router with a cable, go to Start , Run , type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK . Step 2 T ype ipconfig and press Enter . Y our network settings will be displayed. Step 3 W rite down the values for the IP Address , Subnet Mask , and Defaul ...

  • Airlink AP431W - page 5

    Step 1 Open your W eb Browser (Internet Explorer or Netscape), enter the IP Address of the Access Point (default: 192.168.1.250 ) in the address bar and press Enter . Section 4 Using W eb Configuration Utility Step 2 Enter admin for both the User name and Password and click OK . Y ou can use the Access Point’s built-in W eb Configuration Utility ...

  • Airlink AP431W - page 6

    Step 3 At the Wireless section, enter the SSID (Network Name) for your wireless network and select a Channel number . Step 4 Y ou may enable encryption (authentication) for your wireless network for security purpose, or to match the encryption settings of your existing Access Point. Select an encryption mode from the Authen- tication drop-down list ...

  • Airlink AP431W - page 7

    Step 4a WEP is a basic encryption type for wireless network. • Open System and disabling Encryption implies no encryption • Open System and enabling Encryption implies WEP open system mode • Shared Key and enabling Encryption implies WEP shared key mode • Open System/Shared Key and enabling Encryption implies WEP auto switch mode WEP (Wired ...

  • Airlink AP431W - page 8

    Step 4c WP A-PSK and WP A-2PSK are more secured than WEP and highly recommended. Select WP A-PSK or WP A2-PSK from the drop-down menu and enter the key value in the PassPhrase . Click Apply . WP A-PSK (WiFi Protected Access-Pre Shared Key) Y ou can refer to the User Manual in the provided CD for other authentication types. ...

  • Airlink AP431W - page 9

    Section 5 Step 1 Select the Operating Mode tab to display the Operating Mode page. Selecting Operating Modes This section describes how to change the Access Point’s operating modes. This mode allows your wireless computers to connect to your wired network. (Default mode) Access Point ...

  • Airlink AP431W - page 10

    AP Client The AP Client mode converts the Access Point to a wireless network adapter , allowing the network device such as your computer or game console to become a wireless client. Step 1 Select AP Client and enter the MAC address of the AP you want to connect to. Y ou can also click on the Scan button to display the available wireless networks, a ...

  • Airlink AP431W - page 11

    AP Repeater The AP Repeater mode converts the Access Point to a wireless repeater . By extending the wireless signal of the source AP/wireless router , the wireless coverage is expanded. Step 1 Select AP Repeater and enter the MAC address or use the Scan button to search for the remote AP (source AP/wireless router). Click Apply to save the changes ...

  • Airlink AP431W - page 12

    WDS (Bridge) The WDS mode converts the Access Point to a wireless bridge. It bridges the network clients from physically separate LANs into one virtual LAN. Step 1 Select WDS and enter the MAC address of the remote APs. Click Apply to save the changes. Step 2 Configure other Access Points in the same way . ...

  • Airlink AP431W - page 13

    WDS with AP The WDS mode converts the Access Point to a wireless bridge. It bridges the network clients from physically separate LANs into one virtual LAN and allows wireless clients to connect to the network via the Access Point. Step 1 Select WDS with AP and enter the MAC address of the remote APs. Click Apply to save the changes. Step 2 Configur ...

  • Airlink AP431W - page 14

    Section 6 Connecting to the Access Point Once you have properly configured the Access Point, your wireless computers should be able to detect its signal. Use your wireless network adapter ’s utility to detect and connect to the Access Point. Y ou can identify the Access Point by its MAC Address , which is displayed in the BSSID field of your wire ...

Manufacturer Airlink Category Network Card

Documents that we receive from a manufacturer of a Airlink AP431W can be divided into several groups. They are, among others:
- Airlink technical drawings
- AP431W manuals
- Airlink product data sheets
- information booklets
- or energy labels Airlink AP431W
All of them are important, but the most important information from the point of view of use of the device are in the user manual Airlink AP431W.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Airlink AP431W, service manual, brief instructions and user manuals Airlink AP431W. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Airlink AP431W.

Similar manuals

A complete manual for the device Airlink AP431W, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Airlink AP431W by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Airlink AP431W.

A complete Airlink manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Airlink AP431W - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Airlink AP431W, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Airlink AP431W, that we can find in the current document
3. Tips how to use the basic functions of the device Airlink AP431W - which should help us in our first steps of using Airlink AP431W
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Airlink AP431W
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Airlink AP431W in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Airlink AP431W?

Use the form below

If you did not solve your problem by using a manual Airlink AP431W, ask a question using the form below. If a user had a similar problem with Airlink AP431W it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)