English dropdown-ico

Manual Edimax ER-5398S

13 pages 0.21 mb
Download

Go to site of 13

Summary
  • Edimax ER-5398S - page 1

    DIMAX Ethernet Hub ER-5398S 18-Port Rackmount Ethernet Hub User ’ s Manual S S L A N P R O F E I O N A L ...

  • Edimax ER-5398S - page 2

    This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the instructions provided with the equipment, may cause interference to radio and TV reception. The equipment has been tested and found to comply with the limits for a Class A computing device in accordance with the sp ...

  • Edimax ER-5398S - page 3

    Chapter 1 Introduction ....................................1 Chapter 2 Features & Specifications ..............2 Chapter 3 Package Contents ...........................3 Chapter 4 Physical Description .......................4 Chapter 5 Installation ......................................6 Chapter 6 Trouble-shooting ............................9 C ...

  • Edimax ER-5398S - page 4

    1 1 Introduction Congratulations on your purchase of Edimax ’ s 18-port rackmount Ethernet 10Base-T hub - ER-5398S. Designed to meet small and large 10Base-T network requirements, ER-5398S is built with 16 RJ-45 ports and two extra auto-detect AUI /BNC coaxial ports for cascading other 10Base-T hubs, mixing with thin or thick coaxial segments, or ...

  • Edimax ER-5398S - page 5

    2 2 Features & Specifications (1) Features n Comply with IEEE 802.3 10Base-T, 10Base-2 and 10Base-5 Ethernet Standards. n Support sixteen RJ-45 connectors for 10Base-T connection and two auto-detect 10Base-2 BNC/10Base-5 AUI ports for mixed media network environment. n Built-in uplink port for easy connection to another hub using regular straig ...

  • Edimax ER-5398S - page 6

    3 3 Package Contents n 18-port rackmount Ethernet Hub n One power cord n Two T-Connectors n Rackmount accessories n User ’ s manual 3 Figure 3-1 Package contents 1X 2X 3X 4X 5X 6X 7X 8X 13X 14X 15X 16MDI-X 9X 10X 11X 12X 16MDI L P R O F E S S 18 PORT/10 Mbps ER-5398 10 BaseT Ethernet 1 3579 Link/Rx Partition Collision Jabber Power 2 4 6 8 10 12 1 ...

  • Edimax ER-5398S - page 7

    L A N P R O F E S S I O N L 18 PORT/10 Mbps ER-5398 10 BaseT Ethernet 1 3 5 7 9 Link/Rx Partition Collision Jabber Power 2 4 6 8 10 12 14 16 11 13 15 1X 2X 3X 4X 5X 6X 7X 8X 13X 14X 15X 16MDI-X 9X 10X 11X 12X 16MDI DIMAX 1 2 3 4 ON BNC 1 BNC 2 AUI 1 AUI 2 Power 100-240VAC 1A L A N P R O F E S S I O N L 18 PORT/10 Mbps ER-5398 10 BaseT Ethernet 1357 ...

  • Edimax ER-5398S - page 8

    (2) LED LED Color Status Description Power Partition Link/Rx (Link/Receive) Collision Green Green Red Yellow Lit Off Lit Off Lit Off Flash Lit Off Power is supplied No power A valid link is established Data packets received No link is established This port is patitioned This port is working normally Collision detected in this segment No Collision T ...

  • Edimax ER-5398S - page 9

    5 5 Installation 1. Operating Environment ER-5398S must be installed and operated within the limits of specified operating temperature and humidity (see previous section under Specifications). Do not place objects on top of the unit. Do not obstruct any vents at the sides of the unit. Do not position the hub near any heating source such as heater, ...

  • Edimax ER-5398S - page 10

    4. Connecting network devices with coaxial cables ER-5398S provides two auto-detect BNC/AUI coaxial ports, each can function as either BNC or as AUI but can be used at the same time. A set of configuration DIP switches are located between port 1 and port 2, they can be used to configure the coaxial port as auto-detect, BNC only or AUI only as illus ...

  • Edimax ER-5398S - page 11

    8 5. Connecting the power Connect the power cord to the power socket on the rear panel of the unit. Connect the power cord to the power outlet and turn on power switch. The green Power LED on the front panel should be lit. Figure 5-5 Connect the power 1 2 3 4 ON BNC 1 BNC 2 AUI 1 AUI 2 Power 100-240VAC 1A ...

  • Edimax ER-5398S - page 12

    6 6 Trouble-shooting 1. Power LED is not lit l Check if the power cord is properly connected to the power outlet and the hub. Make sure the power switch on the hub is turned ON. 2. LNK/Rx LED is not lit after connecting to an active workstation l Check the power switch of the network devices attached to the hub; make sure they are turned ON. l Chec ...

  • Edimax ER-5398S - page 13

    5. Partition LED is lit l Check the connected devices. The hub will automatically partition a defective Ethernet device which causing excessive errors. 6. Collision LED is constantly flashing l Remove all the network cables; connect the cables back one by one to isolate the source of the collision. l Check the network cable, inferior cable quality ...

Manufacturer Edimax Category Switch

Documents that we receive from a manufacturer of a Edimax ER-5398S can be divided into several groups. They are, among others:
- Edimax technical drawings
- ER-5398S manuals
- Edimax product data sheets
- information booklets
- or energy labels Edimax ER-5398S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Edimax ER-5398S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Edimax ER-5398S, service manual, brief instructions and user manuals Edimax ER-5398S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Edimax ER-5398S.

Similar manuals

A complete manual for the device Edimax ER-5398S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Edimax ER-5398S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Edimax ER-5398S.

A complete Edimax manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Edimax ER-5398S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Edimax ER-5398S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Edimax ER-5398S, that we can find in the current document
3. Tips how to use the basic functions of the device Edimax ER-5398S - which should help us in our first steps of using Edimax ER-5398S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Edimax ER-5398S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Edimax ER-5398S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Edimax ER-5398S?

Use the form below

If you did not solve your problem by using a manual Edimax ER-5398S, ask a question using the form below. If a user had a similar problem with Edimax ER-5398S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)