English dropdown-ico

Manual Stanley Black & Decker TA54

18 pages 1.15 mb
Download

Go to site of 18

Summary
  • Stanley Black & Decker TA54 - page 1

    © 2012 Stanley Black & Decker , Inc. New Britain, CT 06053 U.S.A. 62288 1/2013 V er . 6 S afety , O pera tiOn and M aintenance USer ManUaL T A54 HYDRAULIC T AMPER ...

  • Stanley Black & Decker TA54 - page 2

    ...

  • Stanley Black & Decker TA54 - page 3

    T A54 User Manual ◄ 3 T ABLE OF CONTENTS SERVICING: This manual contains safety , operation, and routine maintenance instructions. Stanley Hydraulic T ools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an au - thorized and certied dealer . Please read the following warning. For the nearest a ...

  • Stanley Black & Decker TA54 - page 4

    4 ► T A54 User Manual SAFETY SYMBOLS Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULA TIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel. Safety symbols and signal words, as shown below , ar ...

  • Stanley Black & Decker TA54 - page 5

    T A54 User Manual ◄ 5 SAFETY PRECAUTIONS T ool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose. These safety precautions are given for your safety . Re- view them carefully before operating the tool and before performing general main ...

  • Stanley Black & Decker TA54 - page 6

    6 ► T A54 User Manual T OOL STICKERS & T AGS SAFETY T AG P/N 15875 (Shown smaller then actual size) DANGER DANGER READ OPERA TION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT . USE ONL Y P ARTS AND REP AIR PROCEDURES APPROVED BY ST ANLEY AND DESCRIBED IN THE OPERA TION MANUAL. T AG TO BE REMOVED ONL Y BY TOOL OPERA TOR. SEE OT ...

  • Stanley Black & Decker TA54 - page 7

    T A54 User Manual ◄ 7 HOSE TYPES The rated working pressure of the hydraulic hose must be equal to or higher than the relief valve setting on the hy- draulic system. There are three types of hydraulic hose that meet this requirement and are authorized for use with Stanley Hydraulic T ools. They are: Certied non-conductive — constructed of th ...

  • Stanley Black & Decker TA54 - page 8

    8 ► T A54 User Manual HOSE RECOMMENDA TIONS Oil Flow Hose Lengths Inside Diameter USE ( Press/Return) Min. Working Pressure GPM LPM FEET METERS INCH MM PSI BAR Certied Non-Conductive Hose - Fiber Braid - for Utility Bucket T rucks 4-9 15-34 up to 10 up to 3 3/8 10 Both 2250 155 Conductive Hose - Wire Braid or Fiber Braid -DO NOT USE NEAR ELECT ...

  • Stanley Black & Decker TA54 - page 9

    T A54 User Manual ◄ 9 HTMA / EHTMA REQUIREMENTS Flow Range Nominal Operating Pressure (at the power supply outlet) System relief valve setting (at the power supply outlet) Maximum back pressure (at tool end of the return hose) Measured at a max. uid viscosity of: (at min. operating temperature) T emperature: Sufcient heat rejection capacity ...

  • Stanley Black & Decker TA54 - page 10

    10 ► T A54 User Manual OPERA TION PRE-OPERA TION PROCEDURES PREP ARA TION FOR INITIAL USE The tool, as shipped, has no special unpacking or as- sembly requirements prior to usage. Inspection to as- sure the tool was not damaged in shipping and does not contain packing debris is all that is required. CHECK HYDRAULIC POWER SOURCE 1. Using a calibra ...

  • Stanley Black & Decker TA54 - page 11

    T A54 User Manual ◄ 1 1 T OOL PROTECTION & CARE • Make sure all couplers are wiped clean before con- nection. • The hydraulic circuit control valve must be in the OFF position when coupling or uncoupling hydrau- lic tools. Failure to do so may result in damage to the quick couplers and cause overheating of the hy- draulic system. • Alwa ...

  • Stanley Black & Decker TA54 - page 12

    12 ► T A54 User Manual TROUBLESHOOTING SYMPTOM CAUSE SOLUTION T ool does not run. Power unit not functioning. Check power unit for proper ow and pressure (3–9 gpm/1 1–34 lpm at 1000–2000 psi/70–140 bar). Couplers or hoses blocked. Remove restriction. Pressure and return line hoses reversed at ports. Be sure hoses are connected to their ...

  • Stanley Black & Decker TA54 - page 13

    T A54 User Manual ◄ 13 TROUBLESHOOTING SYMPTOM CAUSE SOLUTION Oil leakage on piston rod. Lower piston seal failure. Replace seal and wiper , piston and nose as required. Oil leakage around trigger . V alve spool seal failure. Replace seals. Oil leakage around spool end caps. O-ring failure. Replace O-rings. Piston extends but does not retract (re ...

  • Stanley Black & Decker TA54 - page 14

    14 ► T A54 User Manual SPECIFICA TIONS Oil Flow Range .............................................................................................................................. 3-9 gpm/1 1-34 lpm Pressure Range ................................................................................................................. 1000-2000 psi/70-14 ...

  • Stanley Black & Decker TA54 - page 15

    T A54 User Manual ◄ 15 T A54 P ARTS ILLUSTRA TION ...

  • Stanley Black & Decker TA54 - page 16

    16 ► T A54 User Manual T A54 P ARTS LIST ITEM QTY P ART NO. DESCRIPTION 1 1 01038 THRUST BRIDGE W ASHER 2 1 00823 CUSHION 3 1 00834 O-RING 4 1 01262 O-RING 5 1 14883 NOSE 6 1 01795 JAM NUT 7 1 14891 SEAL 8 1 14884 SEAL WASHER 9 1 04902 RET AINING RING, SPIROLOX 10 1 08434 FEL T W ASHER 11 1 15016 ROD WIPER 12 1 00833 SHOE 13 1 00825 LOCKWASHER 14 ...

  • Stanley Black & Decker TA54 - page 17

    ...

  • Stanley Black & Decker TA54 - page 18

    Stanley Hydraulic T ools 3810 SE Naef Road Milwaukie, Oregon 97267-5698 USA (503) 659-5660 / Fax (503) 652-1780 www .stanleyhydraulic.com IMPORT ANT T o ll out a Product Warranty Recording form, and for information on your warranty , visit Stanleyhydraulic.com and select the W arranty tab. ( NOTE: T he warranty recording form must be submitted t ...

Manufacturer Stanley Black & Decker Category Boat

Documents that we receive from a manufacturer of a Stanley Black & Decker TA54 can be divided into several groups. They are, among others:
- Stanley Black & Decker technical drawings
- TA54 manuals
- Stanley Black & Decker product data sheets
- information booklets
- or energy labels Stanley Black & Decker TA54
All of them are important, but the most important information from the point of view of use of the device are in the user manual Stanley Black & Decker TA54.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Stanley Black & Decker TA54, service manual, brief instructions and user manuals Stanley Black & Decker TA54. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Stanley Black & Decker TA54.

Similar manuals

A complete manual for the device Stanley Black & Decker TA54, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Stanley Black & Decker TA54 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Stanley Black & Decker TA54.

A complete Stanley Black & Decker manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Stanley Black & Decker TA54 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Stanley Black & Decker TA54, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Stanley Black & Decker TA54, that we can find in the current document
3. Tips how to use the basic functions of the device Stanley Black & Decker TA54 - which should help us in our first steps of using Stanley Black & Decker TA54
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Stanley Black & Decker TA54
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Stanley Black & Decker TA54 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Stanley Black & Decker TA54?

Use the form below

If you did not solve your problem by using a manual Stanley Black & Decker TA54, ask a question using the form below. If a user had a similar problem with Stanley Black & Decker TA54 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)