English dropdown-ico

Manual AirLink AICAP650W

17 pages Not applicable
Download

Go to site of 17

Summary
  • AirLink AICAP650W - page 1

    Ver . 1.0 Quick Inst allation Guide Model # AICAP650W SkyIPCam650W ...

  • AirLink AICAP650W - page 2

    Section 1 Getting S tarted System Requirement: Before you begin, please review the following system requirement. • OS: Windows® 98SE/ME/2000/XP . • CPU: 650MHz or above (2.4 GHz recommended when monitoring multiple cameras simultaneously) • Memory Size: 256MB • Resolution: 1024x768 or above • Web Browser: Internet Explorer 5.0 or above T ...

  • AirLink AICAP650W - page 3

    Step 3 Power on the IP Camera by connecting one end of the supplied power adapter to the power jack of the Camera and connecting the other end to an electrical outlet. S tep 4 V erify that the LED light s on the Camera are lit. If not, verify that all the connections are secure and try again. Step 2 Connect one end of a network cable to the IP Came ...

  • AirLink AICAP650W - page 4

    Section 2 Installing the Setup Wizard Step 1 Insert the provided CD and wait for the autorun screen to appear . Step 2 Click on Install Setup Wizard . Note: If the autorun screen does not appear automatically , go to S tart > Run > and type D:SetupSetup.exe (where D is the letter of your CD drive) and click OK . Step 3 Click Next . ...

  • AirLink AICAP650W - page 5

    Step 4 Click Ye s to accept the License Agreement. Step 5 Click Next to accept the default Destination Folder . Step 6 Click Finish to complete the installation. ...

  • AirLink AICAP650W - page 6

    Section 3 Using the Setup Wizard Step 1 Go to St art > (All) Programs > AirLink101 IP Camera Setup Wizard > AirLink101 IP Camera Setup Wizard . Step 2 Select the IP Camera you want to configure from the list and click on the Wizard button. ...

  • AirLink AICAP650W - page 7

    Step 3 If the Camera’s default IP address is on a dif ferent subnet, the following message will appear . Click Y es to continue. If you do not receive this message, skip to Step 6 . Step 5 The Wizard will automatically generate an IP address for the camera, if this address is not in use by any other device in your local network, click OK . Otherw ...

  • AirLink AICAP650W - page 8

    Step 6 Enter admin for both the Admin ID and Password field and click Next . Optionally , you can change the password by checking on the Change box and entering the new password. Step 7 If you need to change the Camera’s IP address because another network device is already using the same address, you can assign a new address here and click Next . ...

  • AirLink AICAP650W - page 9

    WEP WP A Step 9a Select the appropriate Key Format and enter the same WEP Code Key as your wireless router . Click Next and skip to S tep 10 . Step 9b Enter the same W P A Share Key as your wireless router and click Next . Step 10 V erify that all the fields are correct and click Rest art to save the settings and reboot the camera. ...

  • AirLink AICAP650W - page 10

    Section 4 V iewing Images Step 1 At the Setup Wizard, select the desired camera from the list and click on the W eb Config button. Step 2 Enter the password for the camera (Default is admin ) and click OK . Note: The following steps describe how to view images from within the same local area network as the IP Camera. T o view images from an externa ...

  • AirLink AICAP650W - page 11

    Note: ActiveX must be installed and enabled on your Web Browser (Internet Explorer) before you can view the live videos. For more information, please refer to the next section. Step 3 The welcome page appears. If you did not change the default password, you will be prompted to do so before accessing the camera. Step 4 The Main menu along with the l ...

  • AirLink AICAP650W - page 12

    Section 5 Enabling and Installing ActiveX If no image appears on the web browser (Internet Explorer), follow the steps below to enable and install ActiveX. Step 1 Open Internet Explorer and go to T ools > Internet Options . Step 2 Select the Security tab and click on Custom Level . ...

  • AirLink AICAP650W - page 13

    Step 3 V erify the following settings are selected. Click OK when done: • Automatic prompting for ActiveX controls: Enable • Download signed ActiveX controls: Prompt • Run ActiveX controls and plug-ins: Enable Step 4 Close Internet Explorer and re-launch the Web Config screen. ...

  • AirLink AICAP650W - page 14

    Step 5 Click on the ActiveX Control prompt . Step 6 Select Install ActiveX Control . Step 7 Click on Inst all to install the ActiveX Control. Step 8 After the ActiveX Control is installed you should see the live video on Internet Explorer . ...

  • AirLink AICAP650W - page 15

    Section 6 Wireless Connection After you have configured the IP Camera from the Setup Wizard, you may unplug the Camera’s network cable from the wireless router and place the camera at the desired location. T o access the camera from a wireless computer , open the web browser (Internet Explorer), enter the IP Address of the camera (default is 192. ...

  • AirLink AICAP650W - page 16

    E-mail: support@airlink101.com T oll Free: 1-888-746-3238 Web Site: www .airlink101.com Section 7 T echnical Support ...

  • AirLink AICAP650W - page 17

    *Theoretical maximum wireless signal rate based on IEEE standard 802.1 1g specifications. Actual data throughput will vary . Netw ork conditions and environmental factors, including volume of network traffic, building materials and construction, mix of wireless products used, radio frequency interference (e.g., cordless telephones and microwaves) a ...

Manufacturer AirLink Category Security camera

Documents that we receive from a manufacturer of a AirLink AICAP650W can be divided into several groups. They are, among others:
- AirLink technical drawings
- AICAP650W manuals
- AirLink product data sheets
- information booklets
- or energy labels AirLink AICAP650W
All of them are important, but the most important information from the point of view of use of the device are in the user manual AirLink AICAP650W.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AirLink AICAP650W, service manual, brief instructions and user manuals AirLink AICAP650W. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AirLink AICAP650W.

Similar manuals

A complete manual for the device AirLink AICAP650W, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AirLink AICAP650W by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AirLink AICAP650W.

A complete AirLink manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AirLink AICAP650W - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AirLink AICAP650W, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AirLink AICAP650W, that we can find in the current document
3. Tips how to use the basic functions of the device AirLink AICAP650W - which should help us in our first steps of using AirLink AICAP650W
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AirLink AICAP650W
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AirLink AICAP650W in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AirLink AICAP650W?

Use the form below

If you did not solve your problem by using a manual AirLink AICAP650W, ask a question using the form below. If a user had a similar problem with AirLink AICAP650W it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)