English dropdown-ico

Manual Sim2 Multimedia HT300 XTRA

32 pages 4.04 mb
Download

Go to site of 32

Summary
  • Sim2 Multimedia HT300 XTRA - page 1

    User and Installation Manual The home theater projector HT300 XTRA cod.46.0328.000 ...

  • Sim2 Multimedia HT300 XTRA - page 2

    LIGHT F1 ZOOM FOCUS F2 Not active in this model. Not active in this model. MENU - Activates the On Screen Display menus. Navigates menu pages. FREEZE Freezes a moving picture. STAND-BY Switches off to stand-by. 0-9 Keys Switch on from stand-by and allow direct source selection. ESCAPE Deactivates the On Screen Display. MENU + Activates the On Scree ...

  • Sim2 Multimedia HT300 XTRA - page 3

    1 XTRA 1 INTRODUCTION Congratulations and thank you for choosing the HT 300 XTRA , a SIM2 Multimedia SpA product (Fig. 1) . C - S Y N C D V I ...

  • Sim2 Multimedia HT300 XTRA - page 4

    2 XTRA A sophisticated proprietary optical system, coupled with a hight perfor mance zoom lens ensures hight contrast images, superior uniformity and edge-to-edge definition. A new 6-segment colour wheel dramatically reduces the so called “rainbow effect” and gives a better contrast, better colorimetry and a lower black level to the image. The ...

  • Sim2 Multimedia HT300 XTRA - page 5

    3 XTRA 1 Projection lens 2 Lens shift knob 3 Cooling air inlet vents 4 Remote control IR sensor 5 Cooling air outlet vents 6 Adjustable carry-handle 7 Adjustable levelling feet 8 Ceiling/wall bracket fixing holes 6 4 1 2 3 5 8 7 C-SYNC DVI 12 11 13 17 9 10 22 16 20 15 14 18 21 19 9 Fused power socket 10 Main power switch 11 Remote contr ol rear IR ...

  • Sim2 Multimedia HT300 XTRA - page 6

    4 XTRA ! CAUTION RISK OF ELECTRIC SHOCK! DO NOT REMOVE THE TOP COVER Prior to switching on the projector please r ead each chapter of this manual carefully as this manual pr ovides basic instructions for using the projector . The installation of the lamp assembly , preliminary adjustments and procedures that necessitate the r emoval of the top cove ...

  • Sim2 Multimedia HT300 XTRA - page 7

    5 XTRA Please follow carefully the warnings listed below , to ensure safe and long term per formance of your projector . • Connect the projector to a power supply with a nominal voltage within the following values: 100-240 V ac, 50/60 Hz, earthed (Fig. 3) . 100-240 V ac 50/60 Hz D V I Fig. 3 • The mains plug is the disconnect device. T ake care ...

  • Sim2 Multimedia HT300 XTRA - page 8

    6 XTRA 3 P ACKAGING AND CONTENTS T o unpack the pr ojector safely and easily please follow steps 1 to 4, as per drawing (Fig. 5). It is recommended that the carton and packaging is retained for future use and in the unlikely event that your pr ojector needs to be returned for repair . The carton should contain the following: - the projector - the r ...

  • Sim2 Multimedia HT300 XTRA - page 9

    7 XTRA Position the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling or wall installation. CAUTION: In the case of ceiling or wall mounting using a suspension bracket, follow the instructions carefully and comply with the safety standar ds you will find in the box together with the bracket. If you use a b ...

  • Sim2 Multimedia HT300 XTRA - page 10

    8 XTRA KEYSTONE 20% C-SYNC DVI Fig. 9 The Orientation adjustment in the Set up menu will allow the projector to be used for desktop fr ont, ceiling front, desktop rear and ceiling rear installations (Fig. 10) . C - S Y N C D V I Fig. 10 T o activate an electric motorised scr een a 12 V olt output is provided at the r ear of the projector or with th ...

  • Sim2 Multimedia HT300 XTRA - page 11

    9 XTRA which is undesirable for a large audience. Preferably , use a screen with black, non-r eflecting borders, which will perfectly frame the projected image. Avoid light shining dir ectly on the screen during pr ojection as this will reduce contrast and black level detail on the pr ojected image. For the true cinema experience best results ar e ...

  • Sim2 Multimedia HT300 XTRA - page 12

    10 XTRA SWITCHING OFF AND RETURNING T O ST AND-BY By remote contr ol: press By keyboard: pr ess key When switching off, the pr ojector goes in to stand-by memorising the input selection at the time of switch-off. The fans will continue to work until the lamp has cooled down (red and gr een LEDs flashing) and will stop automatically after this perio ...

  • Sim2 Multimedia HT300 XTRA - page 13

    11 XTRA 100 Hz. Computer Resolutions of VGA, SVGA, XGA, SXGA and UXGA can be displayed. C-SYNC DVI Fig. 19 This input is suitable for a RGB video signal, or for a Component (YCrCb) type, with composite synchronisation on the gr een signal (RGsB) or on the luminance (Y) signal (YsCrCb) through a cable with RCA/Phono type connector (Fig. 20) . Only h ...

  • Sim2 Multimedia HT300 XTRA - page 14

    12 XTRA Only horizontal scanning frequencies of 15 kHz (standar d vi- deo resolution) or 32 kHz (high definition video, with pr ogressi- ve scanning) can be applied to this input. DVI INPUT A DVI-D signal (digital RGB) can be applied to this input ( Fig. 21) . C-SYNC DVI Fig. 21 REMOTE INPUT INTERF ACE CONNECTING CABLE With a special cable (optiona ...

  • Sim2 Multimedia HT300 XTRA - page 15

    13 XTRA The output can be used to contr ol a screen masking system; its output can be set with the “ Screen contr ol ” adjustment in the “ Aspect ” menu. This output allows reduction in the ar ea of a 16:9 screen, into a 4:3 format, by activating a screen masking system (refer to screen manufactur er for further information). RS232 INTERF A ...

  • Sim2 Multimedia HT300 XTRA - page 16

    14 XTRA 8 REMOTE CONTROL Insert the batteries, taking care to match the polarity , as indicated in the battery recess of the remote (Fig. 26) . + - + - + - + - four 1.5V AAA alkaline batteries Fig. 26 Change the batteries in the remote control if experiencing difficulty in sending commands to the pr ojector . If the remote control is not to be used ...

  • Sim2 Multimedia HT300 XTRA - page 17

    15 XTRA 9 ON SCREEN MENUS Vid eo NTSC/60Hz Normal Fig. 28 MAIN MENU T o access the main On Scr een Display menu, press the Menu key on the keyboard or the key Menu + or Menu - on the remote contr ol (Fig. 29) . The main menu is divided into four sections to cover various adjustments in a practical and logical manner . The on-screen menu layout is d ...

  • Sim2 Multimedia HT300 XTRA - page 18

    16 XTRA PICTURE This menu features adjustments r elating to the projected image quality . BRIGHTNESS CONTRAST COLOR SHARPNESS FIL TER 20 50 50 7 6 CINEMA MODE Off PICTURE Auto VIDEO TYPE Normal VCR1 VCR2 VIDEO BRIGHTNESS CONTRAST COLOR SHARPNESS FIL TER 20 50 50 7 6 CINEMA MODE Off PICTURE Auto VIDEO TYPE Normal VCR1 VCR2 TINT 85 VIDEO-NTSC BRIGHTN ...

  • Sim2 Multimedia HT300 XTRA - page 19

    17 XTRA IMAGE ADJUSTMENTS INPUT SIGNALS AND ADJUST ABLE/SETTING ITEMS This menu features adjustments r elating to position, aspect ratio and magnification etc. POSITION ASPECT ADV ANCED SETTINGS MAGNIFICA TION IMAGE ADJUSTMENTS VIDEO RGB RGB-DVI ADJUSTMENTS - (*) adjustable/can be set not adjustable/can not be set not adjustable if RI2 input BRIGHT ...

  • Sim2 Multimedia HT300 XTRA - page 20

    18 XTRA POSITION Use this adjustment to position the image vertically and horizontally . HORIZONT AL: 9 VERTICAL: 6 ASPECT Determines the aspect ratio of the projected image. From this menu it is possible to select the aspect ratio by using the numeric keys 1...8 of the remote contr ol. 5 PIXEL TO PIXEL 7 USER 2 8 USER 3 6 USER 1 1 NORMAL 2 ANAMORP ...

  • Sim2 Multimedia HT300 XTRA - page 21

    19 XTRA Phase The phase adjustment determines the stability and sharpness of the vertical lines in the projected image. ADV ANCED SETTINGS Advanced colour settings are accessible via this menu. We r ecommend the use of these settings only to the experienced user , as their adjustment can seriously affect final image quality . 2 COLOR TEMPERA TURE G ...

  • Sim2 Multimedia HT300 XTRA - page 22

    20 XTRA Select Pan (zoom button on the remote contr ol) to choose the area of image to enlarge, using all four arr ow keys. Via remote contr ol, it is possible to alter nate between modes, by pressing the key . SETUP The installation menu gives access to features that will allow for correct installation of the pr ojector . ORIENT A TION KEYSTONE PR ...

  • Sim2 Multimedia HT300 XTRA - page 23

    21 XTRA 0 -10 KEYSTONE HORIZONT AL VERTICAL PROJECTION LENS T o adjust Focus and Size of the pr ojected image, use the lens settings. FOCUS ZOOM PROJECTION LENS F1 ZOOM FOCUS F2 ZOOM ZOOM ZO O M ZO O M FOCUS FOCUS FOCUS ZOOM FOCUS C - S Y N C D V I Alternatively , press keys Focus and (Zoom) on your re- mote control, or the key -Focus-Esc on keyboa ...

  • Sim2 Multimedia HT300 XTRA - page 24

    22 XTRA LANGUAGE Lists the languages options available for the On Screen Display menus. ENGLISH IT ALIANO FRANCAIS LANGUAGE DEUTSCH ESP ANOL PORT OGUES OSD POSITION T o position the On Screen Display within the pictur e area, use the arrow keys (Fig. 31a) or press the 1 to 9 keys on the remo- te control (Fig. 31b) . Fig. 31a Fig. 31b OSD BACKGROUND ...

  • Sim2 Multimedia HT300 XTRA - page 25

    23 XTRA 10 CLEANING AND MAINTENANCE - Check the integrity of cables used to connect various sources. - If you ar e using the Remote Input Interface, do not to confuse the menu for selection of projector ’ s inputs ( Source Selection ), with the menu for selection of remote inputs ( Source Selection / RI2 ). Out of range Either the resolution or t ...

  • Sim2 Multimedia HT300 XTRA - page 26

    24 XTRA Image is disturbed, unstable or noisy - V erify compatibility of video/graphic signals with the technical specifications of the projector . - Check the integrity of cables connecting projector to various sources. - If the signal source is a terrestrial br oadcast (via a VCR) check that the receiving channel has been corr ectly tuned in and ...

  • Sim2 Multimedia HT300 XTRA - page 27

    25 XTRA Y ou can purchase the following optional accessories at your Dealer: - Remote Input Interface with 10 m Cable. - W all/Ceiling Bracket Kit. 12 OPTIONAL ACCESSORIES Use only original, or SIM2 Multimedia appr oved, accessories. CAUTION: for ceiling/wall installation, by means of suspension bracket, car efully follow the instructions and safet ...

  • Sim2 Multimedia HT300 XTRA - page 28

    26 XTRA Low V oltage Power Output: two 12 Vdc output, 100 mA max on jack connectors GENERAL Supply: fro m 100 to 240 V ac, -10% +6% tolerance Frequency: from 48 to 62 Hz Consumption: 180 W max Fuse: T 3.15A H, 5 x 20 mm Dimensions of projector: 352 mm x 174 mm x 318 mm (LxHxD) 13 ” -7/8 x 6 ” -7/8 x 12 ” -1/2 (LxHxD) Weight of pr ojector: 5.0 ...

  • Sim2 Multimedia HT300 XTRA - page 29

    27 XTRA C PROJECTION DIST ANCES Follow the table below to determine the optimal projection distance (between the screen and the center of the lens). This will help you to obtain the desired scr een size. CC CC DP DP Screen Screen size width (diagonal) min. DP max CC max. DP max CC Min projection distance 16/9 2,7 9 ’ 0 ” 3,3 10 ’ 9 ” 3,8 12 ...

  • Sim2 Multimedia HT300 XTRA - page 30

    28 XTRA Screen Screen size width (diagonal) min. DP max CC max. DP max CC Min projection distance 4/3 3,4 11 ’ 0 ” 4,0 13 ’ 2 ” 4,7 15 ’ 7 ” 5,4 17 ’ 7 ” 6,0 19 ’ 9 ” 6,7 22 ’ 0 ” 8,0 26 ’ 5 ” 10,1 33 ’ 0 ” 12,1 39 ’ 7 ” 13,4 44 ’ 0 ” -- -- 1,0 40 ” 1,2 48 ” 1,4 56 ” 1,6 64 ” 1,8 72 ” 2,0 80 ” 2,4 ...

  • Sim2 Multimedia HT300 XTRA - page 31

    29 XTRA 1 INTRODUCTION 1 2 IMPORT ANT SAFETY INSTRUCTIONS 4 3 P ACKAGING AND CONTENTS 6 4 INST ALLA TION 7 5 SWITCHING ON AND OFF THE PROJECTOR 9 Switch on from stand-by 9 Switching off and r eturning to stand-by 10 6 CONNECTIONS 10 Composite video input 11 S-VIDEO Input 11 VGA input 11 RGB/YCrCb Input 11 DVI Input 12 Remote Input Interface connect ...

  • Sim2 Multimedia HT300 XTRA - page 32

    30 XTRA • Due to the constant product development, specifications and design might be subject to change without notice. SIM2 Multimedia S.p.a. • Viale Lino Zanussi, 11 • 33170 Pordenone - IT AL Y Phone +39.434.383.253-256 • Fax +39.434.383260-261 www .sim2.com • e-mail: info@sim2.it SIM2 USA Inc. • 10108 USA T oday Way • 33025 Miramar ...

Manufacturer Sim2 Multimedia Category Projector

Documents that we receive from a manufacturer of a Sim2 Multimedia HT300 XTRA can be divided into several groups. They are, among others:
- Sim2 Multimedia technical drawings
- HT300 XTRA manuals
- Sim2 Multimedia product data sheets
- information booklets
- or energy labels Sim2 Multimedia HT300 XTRA
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sim2 Multimedia HT300 XTRA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sim2 Multimedia HT300 XTRA, service manual, brief instructions and user manuals Sim2 Multimedia HT300 XTRA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sim2 Multimedia HT300 XTRA.

Similar manuals

A complete manual for the device Sim2 Multimedia HT300 XTRA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sim2 Multimedia HT300 XTRA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sim2 Multimedia HT300 XTRA.

A complete Sim2 Multimedia manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sim2 Multimedia HT300 XTRA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sim2 Multimedia HT300 XTRA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sim2 Multimedia HT300 XTRA, that we can find in the current document
3. Tips how to use the basic functions of the device Sim2 Multimedia HT300 XTRA - which should help us in our first steps of using Sim2 Multimedia HT300 XTRA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sim2 Multimedia HT300 XTRA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sim2 Multimedia HT300 XTRA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sim2 Multimedia HT300 XTRA?

Use the form below

If you did not solve your problem by using a manual Sim2 Multimedia HT300 XTRA, ask a question using the form below. If a user had a similar problem with Sim2 Multimedia HT300 XTRA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)