English dropdown-ico

Manual Antari Lighting and Effects Z-3000II

32 pages 1.61 mb
Download

Go to site of 32

Summary
  • Antari Lighting and Effects Z-3000II - page 1

    Z-1200II, Z-1500II & Z-3000II USER MANUAL Z-1200II, Z-1500II & Z-3000II BEDIENUNGSANLEITUNG MODE D’EMPLOI des Z-1200II, Z-1500II & Z-3000II Congratulations on the purchase of your new ANTARI Z-SERIES II FOG MACHINE. Wir beglückwünschen Sie zum Kauf Ihres neuen ANTARI Z-SERIES NEBELGERÄTES. Nous vous félicitons pour l’achat de vo ...

  • Antari Lighting and Effects Z-3000II - page 2

    2 TeUser Manual Antari Z-1200II, Z-1500II and Z-3000II Fog Machine Congratulations on the purchase of your new ANTARI Z-Series II FOG MACHINE. Introduction Thank you for choosing a ANTARI Z-Series II Fog Machine. You now own a rugged and powerful state-of- the-art machine. Prior to use, we suggest that you ca refully read all of the instructions. B ...

  • Antari Lighting and Effects Z-3000II - page 3

    3 ♦ If the supply cord is damaged, it must be replaced by m anufacturer or its service agent or similarly qualified personnel in order to avoid a hazard. ♦ The output nozzle becomes very hot during operation (200°C). Keep flammable materials at least 50 cm away from the nozzle. ♦ Always allow your ANTARI Fog Machine to cool down before attem ...

  • Antari Lighting and Effects Z-3000II - page 4

    4 Z-1200II Operation ♦ Add fluid carefully to the liquid tank. Do not overfill the tank. ♦ Plug the remote control cord into the slot ma rked remote control on the back of the machine. ♦ Plug power cord into a grounded electrical outlet. Turn the power switch to “ ON ” on the back of the machine. The red light on the remote will turn ON o ...

  • Antari Lighting and Effects Z-3000II - page 5

    5 determine the cause of the problem, do not simply continue pushing the remote button, as this may damage the unit. Return the machine to your ANTARI dealer. Technical Specifications Model Z-1200II Pow er Supply 115/230 V AC 50/60 Hz~ Pow er Consumption 1250 W Output Volume 500 m³/min. Tank Capacity 2.5 liters Fluid Consumption 44 min./ liter Wei ...

  • Antari Lighting and Effects Z-3000II - page 6

    6 Z-1500II & Z-3000II Operation ♦ Add fluid carefully to the liquid tank. Do not overfill the tank. ♦ The Plug should be in a position that is accessible when using the machine. ♦ Plug power cord into a grounded electrical outlet. Turn the power switch to “ ON ” on the back of the machine. Warm-up is completed when t he display on the ...

  • Antari Lighting and Effects Z-3000II - page 7

    7 Control Module Operation ♦ Z-20: A 10 meter wired multi-function remote control with 5-pin XLR connector for ANTARI Fog Machine models Z-1500II and Z-3000II. Its interface allows the oper ator to customize fog machine functions by adjusting fogging duration, interval and volume. Its L CD displays current operating parameters, which are automati ...

  • Antari Lighting and Effects Z-3000II - page 8

    8 Performance Note ♦ All fog machines develop condensation around the output nozzle. Because this may result in some moisture accumulation on the surface below the output nozzle, consider this condensation when installing your unit. ♦ All fog machines may sputter small amounts of fog occasionally during operation and for a minute or so after be ...

  • Antari Lighting and Effects Z-3000II - page 9

    9 Antari Z-1200II, Z-1500II, Z-3000II on-board DMX settings Channel A 0 - 5 = OFF 6 – 249 = Volume Control ( 5% - 95% ) 250 – 255 = Maximum Volume Output (100% ) The Z-1200 II, Z-1500II & Z-3000II Fog Machines hav e on-board DMX control. These models use 1 channel to control volume output operation. Each c hannel has a value range of 0 to 2 ...

  • Antari Lighting and Effects Z-3000II - page 10

    10 Addressing (Z-1200II) Each device occupies 1 channel. To ensure that the cont rol signals are properly dire cted to each device, they require adressing. This is to be adjusted for every single device by changing the DIP-sw itches as set out in the table below. The starting address is defined as the first channel from which the device will respon ...

  • Antari Lighting and Effects Z-3000II - page 11

    11 Bedienungsanleitung Antari Z 1200II, Z-1500II & Z-3000II Nebelgerät Wir beglückwünschen Sie zum Kauf Ihres neuen ANTARI Z II NEBELGERÄTES. Einleitung Vielen Dank, dass Sie sich für ein ANTA RI Z Nebelgerät entschieden haben. Sie sind nun Im Besitz eines robusten und leistungsst arken Nebelgerätes. Vor Benutzung des Gerätes bitte unbe ...

  • Antari Lighting and Effects Z-3000II - page 12

    12 Explosionsgefahr ♦ Mischen Sie niemals entzündliche Flüssigkeiten jeglicher Art (Öl, Gas, Duftstoffe) unter das Nebelfluid. ♦ Verwenden Sie ausschließlich hochwertige und von Ihrem Händler empfohlene Nebelfluide auf Wasserbasis. Andere Nebelfluide können zum Ve rstopfen oder Tropfen des Gerätes führen. ♦ Achten Sie unbedingt darauf ...

  • Antari Lighting and Effects Z-3000II - page 13

    13 ♦ Weitere Informationen zum Betrieb Ihres ANTARI Z-1200II, Z-1500II und Z-3000 II Nebelgerätes finden Sie unter "Bedienung über eine Fernbedienung". Wichtig: Während des Nebelns immer auf die Fluidtankanzeige achten. Der Betrieb eines Nebelgerätes ohne Fluid kann zu irreparablen Schäden Ihres Gerätes führen. Z-1200II: Ihr Mode ...

  • Antari Lighting and Effects Z-3000II - page 14

    14 Technische Daten Modell Z-1200II Spannungsversorgung 115/230 V AC 50/60 Hz~ Gesamtanschlussw ert 1250 W Ausstoßvolumen 500 m³/min. Tankinhalt 2,5 Liter Fluidverbrauch 44 Min./ Liter Gew icht 11 Kg Maße (LxBxH) 480 x 250 x 260 mm Fernbedienung im Lieferumfang Z-8 Aufw ärmzeit 10 Min. Bedienung über eine Fernbedienung ♦ Die Z-8 ist eine Mul ...

  • Antari Lighting and Effects Z-3000II - page 15

    15 Z-1500II, Z-3000II Bedienung ♦ Füllen Sie vorsichtig Flüssigkeit in den Tank. Überfüllen Sie den Tank nicht. ♦ Stecken Sie den Netzstecker in eine geerdete Schuk osteckdose ein. Wenn notwendig, schalten Sie den Netzschalter auf der Rückseite des Gerätes auf "O N". Die Aufheizzeit ist beendet, sobald die grüne Lampe auf der F ...

  • Antari Lighting and Effects Z-3000II - page 16

    16 1. LCD-Display 2. FUNCTION-Taste 3. UP-/DOWN-Taste 4. TIMER-Taste 5. VOLUME-Taste 6. MANUAL-Taste 1. Über die FUNCTION-Taste können Sie die gewünscht en Einstellungen in den Menüs Volume, Timer, Heat und Fan vornehmen. Drücken Sie ENTER (Volume) um eine Einstellung auszuwählen und sie zu verändern. Unter den Menüpunkt Volume können Sie ...

  • Antari Lighting and Effects Z-3000II - page 17

    17 Hinweise zur Leistung ♦ Alle Nebelgeräte bilden um die Austrittsdüse Kondenswasse r. Beachten Sie bitte bei der Installation, dass dies zu Flüssigkeitsansammlungen unter halb der Austrittsdüse führen kann. ♦ Alle Nebelgeräte können während des Betriebes oder bi s ca. 1 Minute nachdem das Gerät außer Betrieb genommen wurde, gelegent ...

  • Antari Lighting and Effects Z-3000II - page 18

    18 Lagerung 1. Für die Lagerung lassen Sie destilliertes Wasser (kei n Leitungswasser) durch das System laufen, wie in der Reinigungsanleitung beschrieben. Dadurch vermei nden Sie, dass Partikel innerhalb der Pumpe oder der Heizung kondensieren. 2. Wir empfehlen Ihnen monatlich an der Maschine einen Te stlauf durchzuführen, der aus einer Aufwärm ...

  • Antari Lighting and Effects Z-3000II - page 19

    Antari Z-1200II, Z-1500II, Z-3000II DMX-Einstellungen 0 - 5 = Aus 6 – 249 = Ausstoßregulierung ( 5% - 95% ) 250 – 255 = Maximaler Nebelausstoß ( 100%) Die Nebelgeräte Z-1200II, Z-1500II, Z-3000II verfügen über DMX-Ansteuerung. Sie lassen sich über einen DMX-Kanal im Ausstoß regulieren. Jeder Kanal bewegt sich innerhalb der DMX-Werte 0 bi ...

  • Antari Lighting and Effects Z-3000II - page 20

    20 Adressierung des Geräts (Z-1200II) Jeder Gerät belegt 1 Steuerkanal. Damit die Steuersignal e richtig an jedes Gerät adressiert werden, müssen die Geräte kodiert werden. Die Kodierung muss an jedem Gerät einzeln durchgeführt werden, indem Sie die DIP-Schalter entsprechend untenstehender Tabelle einstellen. Die Startadresse ist der erste K ...

  • Antari Lighting and Effects Z-3000II - page 21

    21 Mode d’emploi Antari Z 1200II, Z-1500II & Z-3000II machine à fumée Nous vous félicitons pour l’achat de votre nouvelle machine à fumée ANTARI. Introduction Nous vous remercions d’avoir choisi une ma chine à fumée ANTARI Z. Vous êtes en possession d’un produit robuste et puissant. En vue d’utiliser correctement votre nouvel ...

  • Antari Lighting and Effects Z-3000II - page 22

    22 ♦ Si votre machine à fumée ANTARI ne devait plus fonctionner correctement, éteignez le immédiatement. Videz complètement le réservoir, emballez le soi gneusement (au mieux dans son emballage d’origine) et l’envoyez-le à votre revendeur ANTARI. ♦ Toujours vider le réservoir avant d’envoyer ou transporter l’appareil. ♦ Ne jam ...

  • Antari Lighting and Effects Z-3000II - page 23

    23 Important: Surveillez toujours toujours le niveau de liquide à fumée dans le réservoir pendant les jets de fumée. Un emploi sans liquide à fumée peut endommager la machine. Si vous constatez un débit trop faible, un bruit de la pompe ou un manque total de fumée, débranchez immédiatement votre machine. Vérifiez le niveau de liquide, le ...

  • Antari Lighting and Effects Z-3000II - page 24

    24 Maniement avec télécommande La Z-8 est une télécommande multifonctionelle qui contrôle le modèle Z-1200II d’Antari par un câble de 10 mètres ayant une fiche à 4 pôles. ♦ Le bouton intervalle ajuste le temps entre le s décharges, quand la fonction de timer est engagée. La bande est de 10 secondes ~ 250 secondes. ♦ Le second bout ...

  • Antari Lighting and Effects Z-3000II - page 25

    25 Z-1500II, Z-3000II Maniement ♦ Branchez la fiche d’alimentation de la machine à fu mée dans une prise de courant avec terre. Mettez le commutateur d’alimentation à l’arrière de l’appareil en mode "ON". Le temps de préchauffage est terminé, dès que l’indicateur lumineux vert de la télécommande s’allume. ♦ Pour d ...

  • Antari Lighting and Effects Z-3000II - page 26

    26 1. LCD-Affichage 2. Touche-FUNCTION 3. Touche-UP-/DOWN 4. Touche-TIMER 5. Touche-VOLUME 6. Touche-MANUAL 1. Gràce à la touché “ function”, il est possible d’ajuste r les réglages desires, comme le volume, les intervalles de vaporization,le ventilateur, et le corps de chauffe. La commande ENTER (volume) est utilisée pour sélectionner ...

  • Antari Lighting and Effects Z-3000II - page 27

    27 Remarques de fonctionnement ♦ Toutes machines à fumée dégagent une condensation autour de son bec de sortie qui pourrait mener à une accumulation d'humidité au-dessus de l'appareil. Prenez cela en considération lors du choix de l'emplacement de votre appareil. ♦ Pendant son fonctionnement ou quelque temps après, il se p ...

  • Antari Lighting and Effects Z-3000II - page 28

    28 Série Antari Z-1200II, Z-1500II, Z-3000II DMX Réglages DMX pour des machines à fumée avec contrôle DMX 0 - 5 = Arrêt 6 – 249 = Réglage du débit de fumée ( 5% - 95% ) 250 – 255 = Débit de fumée maximal ( 100% ) Les machines à fumée Z-1200II, Z-1500II et Z-300II possèdent un contrôle DMX. Tous les trois modèles peuvent être r? ...

  • Antari Lighting and Effects Z-3000II - page 29

    Codage de l‘appareil (Z-1200II) Chaque appareil occupe 1 canal de contrôle. Pour que les signals de commande s’adressent correctement à chaque appareil, les appareils doivent être codés. Le codage doit être effectué séparément à chaque appareil: régler les minirupteurs selon le relévé ci-contre. L'adresse initiale est le premie ...

  • Antari Lighting and Effects Z-3000II - page 30

    30 ...

  • Antari Lighting and Effects Z-3000II - page 31

    *Note: It is highly recommended to use AN TARI fog liquid for best fog effect. **Warranty Warranty shall be valid only if the product is purchased from Antari’s authorized di stributors or dealers. For w arranty service, send the product only to an authorized distributor or dealer. All warranties are void if the product has been modified in any m ...

  • Antari Lighting and Effects Z-3000II - page 32

    32 ...

Manufacturer Antari Lighting and Effects Category Insect Control Equipment

Documents that we receive from a manufacturer of a Antari Lighting and Effects Z-3000II can be divided into several groups. They are, among others:
- Antari Lighting and Effects technical drawings
- Z-3000II manuals
- Antari Lighting and Effects product data sheets
- information booklets
- or energy labels Antari Lighting and Effects Z-3000II
All of them are important, but the most important information from the point of view of use of the device are in the user manual Antari Lighting and Effects Z-3000II.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Antari Lighting and Effects Z-3000II, service manual, brief instructions and user manuals Antari Lighting and Effects Z-3000II. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Antari Lighting and Effects Z-3000II.

Similar manuals

A complete manual for the device Antari Lighting and Effects Z-3000II, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Antari Lighting and Effects Z-3000II by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Antari Lighting and Effects Z-3000II.

A complete Antari Lighting and Effects manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Antari Lighting and Effects Z-3000II - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Antari Lighting and Effects Z-3000II, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Antari Lighting and Effects Z-3000II, that we can find in the current document
3. Tips how to use the basic functions of the device Antari Lighting and Effects Z-3000II - which should help us in our first steps of using Antari Lighting and Effects Z-3000II
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Antari Lighting and Effects Z-3000II
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Antari Lighting and Effects Z-3000II in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Antari Lighting and Effects Z-3000II?

Use the form below

If you did not solve your problem by using a manual Antari Lighting and Effects Z-3000II, ask a question using the form below. If a user had a similar problem with Antari Lighting and Effects Z-3000II it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)