Manual Jura Capresso 13709

27 pages 0.57 mb
Download

Go to site of 27

Summary
  • Jura Capresso 13709 - page 1

    IMPRESSA F70/F7/F707 Instructions for use 4/05 Art. Nr. 65391 ...

  • Jura Capresso 13709 - page 2

    JURA IMPRESSA JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.jura.com Legend:  DISPLAY: serves as information.  DISPLAY: please follow the instructions shown. = Note = Important = Tip ...

  • Jura Capresso 13709 - page 3

    Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 6 Fig. 7 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 16 1 2 3 Fig. 5 B A Fig. 8 B Fig. 15 Fig. 17 ...

  • Jura Capresso 13709 - page 4

    Control elements 1. Rotary Switch 2. Illuminated ring 3. ON / OFF symbol 4. 1 LARGE CUP symbol 5. 1 COFFEE symbol 6. 1 ESPRESSO symbol 7. MAINTENANCE symbol 8. START symbol 9. Display dialog system 10. Water tank with handle 11. Filler funnel for pre-ground coffee 12. Bean tank cover 13. Aroma preservation cover 14. Steam / hot water draw-off tap 1 ...

  • Jura Capresso 13709 - page 5

    5 Contents 1. Safety information .......................................... page 6 1.1 Warning .............................................. page 6 1.2 Precautions .......................................... page 6 2. Preparing the IMPRESSA ................................ page 6 2.1 Check supply voltage .............................. page 6 2.2 Ch ...

  • Jura Capresso 13709 - page 6

    6 Introduction Thank you for purchasing the IMPRESSA. To ensure perfect func- tioning of your IMPRESSA, carefully read this operating manual and keep it for future reference. Should you need more information or if you encounter particular problems not specified in these operating instructions in sufficient detail, either contact us directly or cont ...

  • Jura Capresso 13709 - page 7

    7  Then fill the water tank and reinstall it. Make sure to install the tank properly, it must engage audibly. 2.4 Fill coffee beans To ensure that your machine will work perfectly for a long time and to avoid damage, please note that the grinding gear of your JURA coffee machine is not suitable for coffee beans which were treated, during or afte ...

  • Jura Capresso 13709 - page 8

    8  Close the steam / hot water draw-off tap (14).  FILLING SYSTEM  HEATING  PRESS MAINT.  Touch the symbol (7).  Machine carries out a rinsing operation.  RINSING  READY If BEANS FILL is displayed, press the coffee draw-off key again. Machine not filled with coffee beans yet. To get an excellent froth, adjust the coffee spou ...

  • Jura Capresso 13709 - page 9

    9 5. Installation of Claris plus filter cartridges If the Claris plus filter cartridge is installed properly, de- scaling of the coffee machine is no longer required. For more information on the Claris plus filter cartridge refer to brochure «Claris plus. Hard on limescale. Gentle on your coffee machine.» 5.1 Installing the filter Draw off 1/2 li ...

  • Jura Capresso 13709 - page 10

    10  Place a sufficiently large jug (approx 1 litre) under the replace- able hot water nozzle (16) and open the steam/hot water tap (14) (Fig. 12).  RINSING FILTER  CLOSE TAP  Open the steam / hot water draw-off tap (14) (Fig. 12).  HEATING UP  READY 5.3 Changing the filter without display request  Press the Rotary Switch (1) un ...

  • Jura Capresso 13709 - page 11

    11 9. Making 2 cups of coffee You cannot choose the strength of the coffee when making 2 cups. The machine automatically makes 2 mild cups of coffee. You can set the amount of water you want with the Rotary Switch (1) prior to drawing off coffee Touch the (8) symbol to stop drawing off coffee pre- maturely. The amount of coffee water you used last ...

  • Jura Capresso 13709 - page 12

    12 10. Drawing off pre-ground coffee Never use instant coffee or quick-coffee. We recommend that you always use powder from fresh coffee beans or, pre- ground, vacuum-packed coffee. Never fill in more than 2 portions of powder. The pre-ground coffee tank is no storage tank. Make sure that the pre-ground you use is not too fine. This may cause block ...

  • Jura Capresso 13709 - page 13

    13  CLOSE TAP  Close the steam / hot water draw-off tap (14).  READY Before CLOSE TAP water may still escape the system. 12. Drawing off steam To ensure perfect operation, clean the 2-stage frothing jet (15) regularly. Screw the nozzle off as described in. Hold the nozzle at the top and at the bottom end and screw it apart (Fig. 16). Thoro ...

  • Jura Capresso 13709 - page 14

    14 13.1 Attaching the Professional-Cappuccino Frother or the Easy-Cappuccino Frother to the IMPRESSA  Remove either the hot water nozzle (Fig.5) or the 2-stage froth- ing jet (Fig. 6).  Now attach the Professional-Cappuccino Frother or the Easy- Cappuccino Frother (Fig.7).  Connect the milk tube with the Professional-Cappuccino Frother or ...

  • Jura Capresso 13709 - page 15

    15  Fill water into a container (approx. 1/2 litre) and immerse the milk tube in it.  Place a sufficiently large vessel under the Professional-Cappuc- cino Frother or the Easy-Cappuccino Frother.  Draw steam until the water from the Professional-Cappuccino Frother or the Easy-Cappuccino Frother runs clean. The Professional-Cappuccino Froth ...

  • Jura Capresso 13709 - page 16

    16  Press the Rotary Switch (1)  RINSE  Turn the Rotary Switch (1) until the required program item ap- pears on the display (9).  e.g. RINSE, CLEAN, FILTER, DE-SCALE or EXIT  e.g. CLEAN  Press the Rotary Switch (1)  The cleaning program starts.  EMPTY TRAY  Continue with Chapter 17 Cleaning, from point 3 EMPTY TRAY 15.4 P ...

  • Jura Capresso 13709 - page 17

    17  The illuminated ring (2) is active.  Turn the Rotary Switch (1) until TIME is displayed.  TIME  Now press the Rotary Switch (1) to start programming the time.  --:--  Turn the rotary Switch (1) to adjust the hours..  12:--  Press the Rotary Switch (1) to confirm the hour settings and to activate the minutes.  12:-- ? ...

  • Jura Capresso 13709 - page 18

    18  OFF AFT. HR  Now press the Rotary Switch (1) to start programming the switch-off time. Switch-off time OFF AFT. HR  5.0 HR  Turn the Rotary Switch (1) to adjust the hours.  1.0 HR  Press the Rotary Switch (1) to save the setting.  OFF AFT. HR  Turn the Rotary Switch (1) until EXIT appears  Press the Rotary Switch (1) ...

  • Jura Capresso 13709 - page 19

    19  LANGUAGE  Turn the Rotary Switch (1) until EXIT appears  Press the Rotary Switch (1) to leave the programming mode.  READY 15.11 Programming Display 24H/AM/PM  READY  Press the Rotary Switch (1) until FILTER – /  appears  The illuminated ring (2) is active.  Turn the Rotary Switch (1) until DISPLAY appears  Press ...

  • Jura Capresso 13709 - page 20

    20 16. Maintenance 16.1 Filling in water  FILL WATER If this information is displayed, drawing off products is no longer possible. Refill water as described in Chapter 2.3.  READY The water tank should be rinsed daily and refilled with fresh water. Only fill in fresh, cold water. Never fill in milk, mineral water or other liquids. 16.2 Emptyi ...

  • Jura Capresso 13709 - page 21

    21 16.6 Cleaning the IMPRESSA After 200 draw-off operations or after 80 rinsing operations, the IMPRESSA must be cleaned. A message appears on the display, telling you to start the cleaning programme. You can still draw off coffee or hot water/steam. However, we recommend that you should clean the machine (Chapter 17) within the next few days.  ...

  • Jura Capresso 13709 - page 22

    22  READY CLEAN  Touch the symbol (7).  EMPTY TRAY  Empty the tray (20).  NO TRAY  Insert the tray (20) again.  Remove the drip grate (19).  Put a container (1 l, Fig. 11) under the adjustable coffee spout (17).  PRESS MAINT.  Touch the symbol (7).  CLEANING  FILL TABLET  Fill in the tablet (see Fig. 14)  P ...

  • Jura Capresso 13709 - page 23

    23 When using the de-scaling agent, immediately remove any splashes or drips from sensitive surfaces, i.e. natural stone and wooden surfaces, or take appropriate precautions. In any case wait until the de-scaling agent is used up and the tank is empty. Never refill de-scaling agent.  MACHINE CALCIFIED / MACHINE READY  Remove hot water nozzle ...

  • Jura Capresso 13709 - page 24

    24 18.1 Decalcifying without display request Decalcifying without display request is only possible if the Claris plus filter is NOT programmed.  Press the Rotary Switch (1) until FILTER – appears.  Turn the Rotary Switch (1) until MAINTENANCE appears.  Press the Rotary Switch (1) to confirm.  RINSE  Turn the Rotary Switch (1) until ...

  • Jura Capresso 13709 - page 25

    25 21. Messages Cause Remedy FILL WATER Water tank is empty. Refill water Float defective Rinse or de-scale water tank FILL BEANS Bean tank is empty. Refill beans Although you have refilled beans, the Draw off a cup of coffee. The message will message still appears. disappear only after you have drawn off a cup of coffee EMPTY GROUNDS Coffee ground ...

  • Jura Capresso 13709 - page 26

    26 22. Problems Problem Cause Remedy Very loud noise coming from the Foreign body in grinding gear Drawing off pre-ground coffee still possible grinding gear Have IMPRESSA checked by JURA Service Too little froth when 2-stage frothing jet blocked clean 2-stage frothing jet frothing milk 2-stage frothing jet in wrong position Draw off steam (Chapter ...

  • Jura Capresso 13709 - page 27

    27 23. Legal information These operating instructions contain all the information required for using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during maintenance. ...

Manufacturer Jura Capresso Category Coffeemaker

Documents that we receive from a manufacturer of a Jura Capresso 13709 can be divided into several groups. They are, among others:
- Jura Capresso technical drawings
- 13709 manuals
- Jura Capresso product data sheets
- information booklets
- or energy labels Jura Capresso 13709
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jura Capresso 13709.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jura Capresso 13709, service manual, brief instructions and user manuals Jura Capresso 13709. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jura Capresso 13709.

A complete manual for the device Jura Capresso 13709, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jura Capresso 13709 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jura Capresso 13709.

A complete Jura Capresso manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jura Capresso 13709 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jura Capresso 13709, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jura Capresso 13709, that we can find in the current document
3. Tips how to use the basic functions of the device Jura Capresso 13709 - which should help us in our first steps of using Jura Capresso 13709
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jura Capresso 13709
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jura Capresso 13709 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jura Capresso 13709?

Use the form below

If you did not solve your problem by using a manual Jura Capresso 13709, ask a question using the form below. If a user had a similar problem with Jura Capresso 13709 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)