English dropdown-ico

Manual Toshiba e-studio 45

166 pages Not applicable
Download

Go to site of 166

Summary
  • Toshiba e-studio 45 - page 1

    This Operator's Man ual is printed with ink containing soy oil. 1-1, KAND A NISHIKI-CHO , CHIY OD A-KU , TOKY O , 101-8442, J AP AN © Copyright T OSHIBA TEC CORPORA TION 2000 ALL RIGHTS RESER VED 4420456102 IN-D-322, 01-04 SO DIGIT AL PLAIN P APER COPIER OPERA T OR'S MANU AL FOR COPYING FUNCTIONS ...

  • Toshiba e-studio 45 - page 2

    WARNING : Changes or modification made to this equipment, not expressly approved by TOSHIBA TEC or parties authorized by TOSHIBA TEC, could void the user's authority to operate the equipment. Use of Recycled Paper in the Copier As with all copiers and reproduction devices, the use of the appropriate paper ensures the best image quality of the ...

  • Toshiba e-studio 45 - page 3

    EPA E NERGY S TAR ® (MFD) The United States Environmental Protection Agency (EPA) has introduced a voluntary E NERGY S TAR Program to encourage the widespread and voluntary use of energy-efficient technologies that enhance the workplace, improve product performance and prevent pollution. As an E NERGY S TAR Partner, the TOSHIBA TEC CORPORATION has ...

  • Toshiba e-studio 45 - page 4

    1 2 3 4 5 6 7 8 9 10 11 12 1 T OSHIB A Q U ALITY IS SECOND T O NONE T -3500 NET 450 gr FOR e-STUDIO45/35 COMPONENTS: Styrene acrylate copolymer,Carbon blac k (1333-86-4), Organic Pigment HANDLE WITH CARE. STORE IN A DR Y PLACE BELOW 35 C(95 F). READ THE OPERA TING INSTRUCTIONS OF THE MA CHINE BEFORE USING. SHAKE WELL BEFORE USING. MANIPULER AVEC PR ...

  • Toshiba e-studio 45 - page 5

    1 2 3 4 5 6 7 8 9 10 11 12 2 T OSHIB A QU ALITY IS SECOND T O NONE (Cont.) General ISO 9000 and ISO 14000 T oshiba toner plants are ISO 9001 or ISO 9002 and ISO 14001 cer tified. Theref ore quality of craftsmanship and en vironmental fr iendly production are guaranteed from the f actor y . Service and Support Benefits T oshiba´s Ser vice engineers ...

  • Toshiba e-studio 45 - page 6

    1 2 3 4 5 6 7 8 9 10 11 12 3 PREF A CE Thank you f or purchasing the T oshiba Digital Copier e-STUDIO45/35. This Operator’ s Manual descr ibes the f ollowing: • how to use the digital copier • how to inspect and carry out maintenance on the digital copier • how to remedy mechanical and cop ying problems Before using the digital copier , tho ...

  • Toshiba e-studio 45 - page 7

    1 2 3 4 5 6 7 8 9 10 11 12 4 PREF A CE (Cont.) Features of the e-STUDIO45/35 The e-STUDIO45/35 is a digital copier that can also be used as a printer , scanner/pr inter , and facsimile by installing the related options . (Please check with your authorized T oshiba dealers to purchase these options.) The e-STUDIO45/35 scans originals and stores the ...

  • Toshiba e-studio 45 - page 8

    1 2 3 4 5 6 7 8 9 10 11 12 5 T ABLE OF CONTENTS T oshiba quality is second to none ................................................................................................... 1 Preface ........................................................................................................................ ....................... 3 F eatures ...

  • Toshiba e-studio 45 - page 9

    1 2 3 4 5 6 7 8 9 10 11 12 6 7. Copying with annotation added ............................................................................................... .. 4-13 8. Page n umbering copying ...................................................................................................... ..... 4-14 9. Magazine sor t copying (from editing men ...

  • Toshiba e-studio 45 - page 10

    1 2 3 4 5 6 7 8 9 10 11 12 7 8. Maintenance .................................................................................................................. ................. 8-1 1. Daily inspection ............................................................................................................ ............... 8-2 2. Simple troublesho ...

  • Toshiba e-studio 45 - page 11

    1 2 3 4 5 6 7 8 9 10 11 12 8 PRECA UTIONS 1. Installation 1 The e-STUDIO45/35 should be installed b y a qualified ser vice technician. Note: The packing material should be disposed of proper ly . 2 T o obtain the best possible results, this copier should be used in conjunction with a dedicated A C power line at the f ollowing ratings. 115V–50/60H ...

  • Toshiba e-studio 45 - page 12

    1 2 3 4 5 6 7 8 9 10 11 12 9 1 Handle and use the copier gently and carefully . • Do not place an ything on the paper cassettes or the original feeding tra y . • Ne ver allo w the power cab le to be trampled on or pinched between hard objects, otherwise an accident or electrical trouble might occur . • Do not allo w any metal items such as pa ...

  • Toshiba e-studio 45 - page 13

    1 2 3 4 5 6 7 8 9 10 11 12 10 This copier has a f orger y prev ention function. Please ensure that your digital copier is not used f or making copies of prohibited items. FORGER Y PREVENTION FUNCTION ...

  • Toshiba e-studio 45 - page 14

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 1. BEFORE MAKING COPIES 1. Descr iption of the digital copier and the optional equipment ..... 1-2 • Main components .......................................................................................... 1-2 • Optional equipment .................................................................................. ...

  • Toshiba e-studio 45 - page 15

    1 2 3 4 5 6 7 8 9 10 11 12 1-2 BEFORE MAKING COPIES *Or iginal Co v er (optional) Or iginal Glass Automatic Duple xer Bypass Guide Or iginal Scale Control P anel Inner T ray Main P ower Switch F ront Cov er Cassettes 1. DESCRIPTION OF THE DIGIT AL COPIER AND THE OPTIONAL EQ UIPMENT Main Components Operator’ s Manual P o c k et (back side) T ouch ...

  • Toshiba e-studio 45 - page 16

    1 2 3 4 5 6 7 8 9 10 11 12 1-3 Optional Equipment y y y y y Key Copy Counter P age 1-15 Records (or accumulates) the number of copies made b y each person or group separately . x x x x x Reversing Automatic Document Feeder P age 2- 6 Automatically f eeds a placed stack of originals one by one to hav e them copied. c c c c c Large-Capacity Feeder Fe ...

  • Toshiba e-studio 45 - page 17

    1 2 3 4 5 6 7 8 9 10 11 12 1-4 BEFORE MAKING COPIES 1. DESCRIPTION OF THE DIGIT AL COPIER AND THE OPTIONAL EQ UIPMENT (Cont.) Contr ol P anel A utomatic Function Clear Ev en if you do not press the FUNCTION CLEAR ke y , within 30 seconds after copying is finished or after the last ke y is pressed in a copy procedure, the automatic function clear mo ...

  • Toshiba e-studio 45 - page 18

    1 2 3 4 5 6 7 8 9 10 11 12 1-5 Digital keys Use these ke ys to enter the number of copies you want to mak e . Up to 999 copies can be set. They can also be used f or setting time and depar tment codes, and f or sheet inser tion, etc. INTERR UPT key While copying is already in prog ress, press this ke y when y ou want to mak e copies of different or ...

  • Toshiba e-studio 45 - page 19

    1 2 3 4 5 6 7 8 9 10 11 12 1-6 BEFORE MAKING COPIES Currently selected cassette size Remaining paper le v el Message area Confir m set functions ke y T ouch keys area Function setting area T otal cop y quantity Reproduction ratio Message Inde x ke ys 1. DESCRIPTION OF THE DIGIT AL COPIER AND THE OPTIONAL EQ UIPMENT (Cont.) T ouch P anel Message Are ...

  • Toshiba e-studio 45 - page 20

    1 2 3 4 5 6 7 8 9 10 11 12 1-7 Confirm set functions key This ke y allows you to confir m the functions that ha ve been set. (The display shown on the right is an e xample.) Clearing the Functions Selected If y ou again press any k ey that is highlighted, the function selected is cleared. Also, if the copier is left inactiv e for appro x. 30 second ...

  • Toshiba e-studio 45 - page 21

    1 2 3 4 5 6 7 8 9 10 11 12 1-8 BEFORE MAKING COPIES PRINTER/ NETWORK COPY FAX 1 1 2 3 4 5 6 7 8 9 0 JOB STATUS START CLEAR/STOP FUNCTION CLEAR INTERRUPT MAIN POWER POWER MONITOR//PAUSE MEMORY RX DATA ERROR ABC DEF JKL GHI MNO TUV PQRS WXYZ 2 C/ FC HELP This function displays the total n umber of copies. The total counter is a cumulativ e counter. Y ...

  • Toshiba e-studio 45 - page 22

    1 2 3 4 5 6 7 8 9 10 11 12 1-9 2. COPY P APER Acceptable P aper T ypes and Siz es/Handling and Storing P aper Plain paper with holes for filing can- not be used. Plain paper with holes for filing can- not be used. Plain paper with holes for filing can- not be used. Also , some of the items specified under “type of paper” ma y not be used depend ...

  • Toshiba e-studio 45 - page 23

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 0 BEFORE MAKING COPIES 3. COPY P APER (Cont.) Changing the P aper Size of the Cassette/Setting the Cassette for Special Uses The paper size of the cassettes of the copier can be changed to desired siz es. The cassettes can also be set fo r cov er sheet, sheet inser tion, F AX and special sheets. 1 Pull out the cassett ...

  • Toshiba e-studio 45 - page 24

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 1 Setting the Cassette f or Special Uses Y ou can set the cassette for v arious uses (cover sheet, sheet inser tion, F AX and special sheets). The acceptable paper is plain paper ( 17 ~2 2 l b.) only . P age 1-9 Cassette f or cover sheet P age 4-18 Cassette f or sheet inser tion P age 4-20 Cassette f or F AX...Needed ...

  • Toshiba e-studio 45 - page 25

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 2 BEFORE MAKING COPIES 3 Press the cassette key corresponding to that in which the paper has been set, then select any of the CO VER , INSERT , F AX and SPECIAL keys. • If you w ant to select the CO VER or INSERT , make sure that paper with the same size as that f or the CO VER or INSER T is set in the other cassett ...

  • Toshiba e-studio 45 - page 26

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 3 2 About 30 seconds later , the copier will become ready for cop ying. • This message appears on the message panel: READ Y 3. TURNING ON THE PO WER SWITCH T urning ON the P ower Switch/A uto Job Star t T urning ON the P ower Switch 1 Open the co ver and turn ON the main power switch. • This message appears on the ...

  • Toshiba e-studio 45 - page 27

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 4 BEFORE MAKING COPIES 3. TURNING ON THE PO WER SWITCH (Cont.) Contr olling the Use of the Copier with Depar tment Codes With the use of depar tment codes (access codes), you can restrict copier users as well as manage cop y v olumes made by individual g roups or depar tments of your compan y . * Register ing, changin ...

  • Toshiba e-studio 45 - page 28

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 5 Controlling the Use of the Copier Using the Optional K ey Cop y Counters 1 The f ollowing message appears on the basic screen: Set ke y cop y counter 2 Insert your key cop y counter . • Holding the counter with its arrow-marked side f acing up and the arrow pointed tow ard the copier , inser t the counter slowly u ...

  • Toshiba e-studio 45 - page 29

    1 2 3 4 5 6 7 8 9 10 11 12 1-1 6 BEFORE MAKING COPIES ...

  • Toshiba e-studio 45 - page 30

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 2. HO W T O MAKE COPIES 1. General cop ying procedures ...................................................... 2-2 2. Setting originals ......................................................................... 2-4 3. A uto job star t ............................................................................. 2-8 4. I ...

  • Toshiba e-studio 45 - page 31

    1 2 3 4 5 6 7 8 9 10 11 12 2-2 HO W T O MAKE COPIES 1. GENERAL COPYING PR OCEDURES When originals are set and the ST ART k e y is pressed with any settings unchanged, copies are made in the initial (def ault) settings (*1). Reproduction ratio ........... 100% Copy quantity ................... 1 A utomatic paper selection 1-sided copies from 1-sided ...

  • Toshiba e-studio 45 - page 32

    1 2 3 4 5 6 7 8 9 10 11 12 2-3 3 Press the ST ART key ( c c c c c in the illustration be- low). • Copying begins . PRINTER/ NETWORK COPY FAX 1 1 2 3 4 5 6 7 8 9 0 JOB STATUS START CLEAR/STOP FUNCTION CLEAR INTERRUPT MAIN POWER POWER MONITOR//PAUSE MEMORY RX DATA ERROR ABC DEF JKL GHI MNO TUV PQRS WXYZ 2 C/ FC HELP Tip T o copy m ultiple original ...

  • Toshiba e-studio 45 - page 33

    1 2 3 4 5 6 7 8 9 10 11 12 2-4 HO W T O MAKE COPIES 2. SETTING ORIGINALS Originals When Placing an Original on the Glass 1 Raising the original co ver or the rever sing auto- matic document feeder (optional), place the origi- nal face down on the glass. 2 Align the original against the left inner corner of the glass. 3 Lower the original co ver or ...

  • Toshiba e-studio 45 - page 34

    1 2 3 4 5 6 7 8 9 10 11 12 2-5 Tip When cop ying or iginals with high transparency , such as OHP films and tracing paper , place a blank sheet of paper the size of the original or larger over the original. Book-type Originals 1 Raise the original co ver or the reversing automatic document feeder (optional), set the original with its center placed o ...

  • Toshiba e-studio 45 - page 35

    1 2 3 4 5 6 7 8 9 10 11 12 2-6 HO W T O MAKE COPIES (1) Badly wr inkled or f olded or iginals; in par ticu- lar , originals whose leading edge is cur led ma y not be correctly fed into the re versing automatic document f eeder. (4) Clipped or stapled or iginals (2) Or iginals with carbon paper (5) Or iginals with holes or tor n originals (3) T aped ...

  • Toshiba e-studio 45 - page 36

    1 2 3 4 5 6 7 8 9 10 11 12 2-7 Slide Slide In the Single-feed Mode Pa g e 5-3 1 Align the slides to the desired original size . 2 Insert the original face up and straight along the slides; it will then be pulled in automatically . • When the original star ts being pulled in automatically , let go of it. 1 After aligning the edges of originals wel ...

  • Toshiba e-studio 45 - page 37

    1 2 3 4 5 6 7 8 9 10 11 12 2-8 HO W T O MAKE COPIES 3. A UT O JOB ST AR T While multi-cop ying is in progress, y ou can reser ve the ne xt copy . 1 Place the original(s). P age 2-4 Select cop y modes as required. 2 Press the ST ART ke y . • Up to 5 jobs including the current printing job can be stored in the memory . Place the originals of the 6t ...

  • Toshiba e-studio 45 - page 38

    1 2 3 4 5 6 7 8 9 10 11 12 2-9 PRINTER/ NETWORK COPY FAX 1 1 2 3 4 5 6 7 8 9 0 JOB STATUS START CLEAR/STOP FUNCTION CLEAR INTERRUPT MAIN POWER POWER MONITOR//PAUSE MEMORY RX DATA ERROR ABC DEF JKL GHI MNO TUV PQRS WXYZ 2 C/ FC HELP 4. INTERR UPT COPYING While multicop ying is in progress, y ou can interr upt it and make copies from diff erent origi ...

  • Toshiba e-studio 45 - page 39

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 0 HO W T O MAKE COPIES 5. ST OPPING THE COPY OPERA TION If you w ant to stop the operation dur ing the scanning of the original or multicop ying, use the CLEAR/ ST OP key . Stopping the Scanning of the Original 1 Press the CLEAR/ST OP key during the scan- ning. • The original scanning operation will be interrupted. ...

  • Toshiba e-studio 45 - page 40

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 1 3 Press the Delete key . 4 The data will be deleted and the multicop ying op- eration will stop. • If there are other data w aiting to be printed, those will star t being output. ...

  • Toshiba e-studio 45 - page 41

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 2 HO W T O MAKE COPIES 6 . DELETING OR CHANGING ORDER OF PENDING JOBS If data are waiting to be printed, you can delete those data which ha ve become unneeded, or change the printing order . Deleting the Data In the f ollowing procedure, y ou can delete the data of a multi- cop ying operation as well. * The received F ...

  • Toshiba e-studio 45 - page 42

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 3 Changing the Printing Or der 1 Press the JOB ST A TUS key on the contr ol panel, then the JOB LIST key on the touc h panel. 2 Select the data y ou want to move. 4 The changing order is completed. • Pressing the JOB ST A TUS or the FUNCTION CLEAR key on the control panel or the RETURN key on the touch panel causes ...

  • Toshiba e-studio 45 - page 43

    1 2 3 4 5 6 7 8 9 10 11 12 2-1 4 HO W T O MAKE COPIES ...

  • Toshiba e-studio 45 - page 44

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 3. SETTING OF B ASIC COPY MODES 1. P aper selection .......................................................................... 3-2 • A utomatic paper selection (APS) ................................................................... 3-2 • Manual paper selection .................................................... ...

  • Toshiba e-studio 45 - page 45

    1 2 3 4 5 6 7 8 9 10 11 12 3-2 SETTING OF BASIC COPY MODES 1. P APER SELECTION A utomatic P aper Selection (APS) When you place regular-siz ed originals on the glass or in the reversing automatic document f eeder (optional), the built-in sensors automatically w o rk to detect the siz e of the originals, helping the copier select and cop y on paper ...

  • Toshiba e-studio 45 - page 46

    1 2 3 4 5 6 7 8 9 10 11 12 3-3 Manual P aper Selection It may not be possib le for the de vice to perf orm Automatic P aper Selection with highly transparent origi- nals such as OHP films and tracing paper , wholly dark originals or or iginals with dark borders, or irregu- lar sized originals such as newspapers and magazines . For these types of or ...

  • Toshiba e-studio 45 - page 47

    1 2 3 4 5 6 7 8 9 10 11 12 3-4 SETTING OF BASIC COPY MODES 1 Set the original(s). Page 2-4 2 Set sheets of paper on the bypass guide and align the slides with the size of the paper . • This message appears: Ready f or bypass cop ying • The paper should be placed with the side to be copied f ac- ing do wn. 1. P APER SELECTION (Cont.) Bypass Copy ...

  • Toshiba e-studio 45 - page 48

    1 2 3 4 5 6 7 8 9 10 11 12 3-5 Note Remo ve copies made on special sheets of paper or OHP films one by one. They should not be allow ed to stac k up in the exit (inner) tr ay or finisher (optional). 3 Press the NON ST AND ARD key . 4 Ke y in each dimension (length, width) . • K ey in the length with the digital ke ys and press the upper SET ke y ...

  • Toshiba e-studio 45 - page 49

    1 2 3 4 5 6 7 8 9 10 11 12 3-6 SETTING OF BASIC COPY MODES 2. REDUCTION AND ENLARGEMENT COPYING There are the f ollowing three wa ys of making copies in the reduction and enlargement mode: • Using Automatic Magnification Selection (AMS) • Specifying both original size and cop y size • Using the reduction/enlargement zoom k eys or the one-touc ...

  • Toshiba e-studio 45 - page 50

    1 2 3 4 5 6 7 8 9 10 11 12 3-7 Specifying both Original Size and Copy Size 1 Set the original(s). Page 2-4 2 Press the ZOOM··· key on the basic screen. 3 Press the ORIGINAL SIZE key of the same size as the original, then press the desired COPY SIZE key . • Using the original size and cop y size, the correct reproduc- tion ratio is computed and ...

  • Toshiba e-studio 45 - page 51

    1 2 3 4 5 6 7 8 9 10 11 12 3-8 SETTING OF BASIC COPY MODES 2. REDUCTION AND ENLARGEMENT COPYING (Cont.) U s i n g t h e Reduction /Enlargement Zoom K e ys or One-touch Zoom K eys 1 Set the original(s). Pa ge 2-4 2 Press the cassette icon representing the desired copy paper size, then press ZOOM···· key . • Y ou can also select the desired cop ...

  • Toshiba e-studio 45 - page 52

    1 2 3 4 5 6 7 8 9 10 11 12 3-9 3. SELECTING TYPES OF COPYING (1-SIDED , 2-SIDED , BOOK-TYPE) This function allows y ou to set the type of or iginals (1-sided, 2-sided or book-type) and the desired type of copying (1-sided or 2-sided). -12- -13- -15- -12- -13- -15- Original Cop y y x c v b * c and v require the optional re versing automatic document ...

  • Toshiba e-studio 45 - page 53

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 0 SETTING OF BASIC COPY MODES • If the “1-SIDED 1-SIDED” mode is not selected, press the ke y (shaded) in the figure on the right, then press the 1 n 1 ke y on the next screen. Select other cop y modes as required. 3 Press the ST ART ke y . 3. SELECTING TYPES OF COPYING (1-SIDED , 2-SIDED , BOOK-TYPE) (Cont.) x ...

  • Toshiba e-studio 45 - page 54

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 1 2 Press the 1 n n n n n 2 key . 3 Place the originals. Page 2-4 • Changing direction of cop y images P age 4-24 Select other copy modes as required. 4 Press the ST ART ke y . When Placing an Original on the Glass 5 Place the next original (2nd side) and press the ST ART ke y . • Y ou can press the YES ke y and t ...

  • Toshiba e-studio 45 - page 55

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 2 SETTING OF BASIC COPY MODES 2 On the basic screen, press the key (shaded) in the figure on the right. 3 Press the 2 n n n n n 2 key . Select other cop y modes as required. 4 Press the ST ART ke y . c c c c c 2-Sided Originals 2-Sided Copies The optional re versing automatic document f eeder must be in- stalled. 1 Se ...

  • Toshiba e-studio 45 - page 56

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 3 3 Press the 2 n n n n n 1 key . Select other cop y modes as required. 4 Press the ST ART ke y . 2 Press the BOOK n n n n n 2 key . 3 Select the book copying type. • Press the RIGHT n RIGHT k ey if cop ying should star t at a right-hand page and end at a r ight-hand page. By the same token, y ou can choose from amo ...

  • Toshiba e-studio 45 - page 57

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 4 SETTING OF BASIC COPY MODES 6 Place the first pa g e(s) to be copied on the glass, and press the ST ART ke y . • If you do not cop y your originals from the first page, the copies will not be arranged in the same order as the origi- nal. • Center the book on the y ellow indicator line with the bottom toward y ou ...

  • Toshiba e-studio 45 - page 58

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 5 4. COPY DENSITY ADJUSTMENT There are two types of image density adjustments: automatic mode (def ault setting) and manual mode. In the automatic mode, the sensors automatically detect the density of each original and select the optimum image density . In the manual mode, y ou can select the desired le vel of image d ...

  • Toshiba e-studio 45 - page 59

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 6 SETTING OF BASIC COPY MODES Manual Copy Density Mode 1 Set the original(s). P age 2-4 2 Press the A UT O on the basic screen. 3 Press either or key to adjust the cop y density to the desired level. • Each time you press the or k ey , your copies will be- come lighter or darker , respectively . • When the DENSITY ...

  • Toshiba e-studio 45 - page 60

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 7 5. SELECTING IMA GE QU ALITY TYPES OF ORIGINALS According to the type of your originals, y ou can choose among the three image types: Photo , T ext or T e xt/ Photo (def ault setting). The Photo mode is suitab le f or cop ying photo or iginals whereas the T ext mode is pref erable f or copying originals containing t ...

  • Toshiba e-studio 45 - page 61

    1 2 3 4 5 6 7 8 9 10 11 12 3-1 8 SETTING OF BASIC COPY MODES ...

  • Toshiba e-studio 45 - page 62

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 4. USING THE EDITING FUNCTIONS 1. Image shift copying .................................................................. 4-2 2. Edge erase cop ying .................................................................. 4-4 3. Dual-page copying ................................................................... 4-5 4 X-Y z ...

  • Toshiba e-studio 45 - page 63

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 USING THE EDITING FUNCTIONS 1. IMA GE SHIFT COPYING 1 Set the original(s). Page 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the IMA GE SHIFT key . • If the k ey f or the desired function is not shown, press the Pre ke y to switch the screen. With this f eature, a margin for binding is created on ...

  • Toshiba e-studio 45 - page 64

    1 2 3 4 5 6 7 8 9 10 11 12 4-3 4 Adjust the width of the marg in, then press the SET key . • The def ault width of the margin is 14 mm. • T o adjust the width, press the 2mm or 30mm key to select the desired number , then press the SET ke y . Select other cop y modes as required. 5 Press the ST ART key . Tip Image shift cop ying can also be per ...

  • Toshiba e-studio 45 - page 65

    1 2 3 4 5 6 7 8 9 10 11 12 4-4 USING THE EDITING FUNCTIONS 2. EDGE ERASE COPYING If your original has a dirty or tor n edge, it ma y be reproduced as a black stain on the cop y . In that case, use Edge Erase Cop ying. A white border is created along the edges of the copy , eliminating those blac k stains. The default width of the white border is 5 ...

  • Toshiba e-studio 45 - page 66

    1 2 3 4 5 6 7 8 9 10 11 12 4-5 3. DU AL-P A GE COPYING 1 Press the EDIT ke y to enter the editing menu. Then, press the DU AL P A GE key . • If the k ey f or the desired function is not shown, press the Pre ke y to s witch the screen. Utilizing this feature allo ws the facing pages of a book or magazine to be copied page by page onto two separate ...

  • Toshiba e-studio 45 - page 67

    1 2 3 4 5 6 7 8 9 10 11 12 4-6 USING THE EDITING FUNCTIONS 4. X-Y ZOOM COPYING 1 Set the original(s). Page 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the XY ZOOM key . • If the k ey f or the desired function is not shown, press the Pre ke y to switch between the screens. Y ou can make copies with diff erent reproduction rati ...

  • Toshiba e-studio 45 - page 68

    1 2 3 4 5 6 7 8 9 10 11 12 4-7 5. IMA GE EDITING T rimming/Masking T r imming cop y Masking cop y Original Y ou can select areas on an original and copy it with the areas trimmed (only the inside of the areas copied) or masked (only the outside of the areas copied). Up to four areas can be specified on an original. * If the settings of the or igina ...

  • Toshiba e-studio 45 - page 69

    1 2 3 4 5 6 7 8 9 10 11 12 4-8 USING THE EDITING FUNCTIONS 5. IMA GE EDITING (Cont.) T rimming/Masking (Cont.) 4 Press the TRIM (or MASK ) key . 5 Enter the distance values f or the specified area. • K ey in the v alue for X1 with the digital ke ys and press the upper SET ke y . • Similarly , set the values f or X2, Y1 and Y2. • When X1, X2, ...

  • Toshiba e-studio 45 - page 70

    1 2 3 4 5 6 7 8 9 10 11 12 4-9 1 Set the original(s). Pa ge 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the EDITING key . • If the k ey f or the desired function is not shown, press the Pre ke y to s witch the screen. Copies are made with images completely re versed in ter ms of the right and the left. 3 Press the MIRROR ke y ...

  • Toshiba e-studio 45 - page 71

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 0 USING THE EDITING FUNCTIONS 5. IMA GE EDITING (Cont.) Negative/P ositive Re versal 1 Set the original(s). Pa ge 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the EDITING key . • If the k ey f or the desired function is not shown, press the Pre ke y to s witch the screen. Originals are copied wit ...

  • Toshiba e-studio 45 - page 72

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 1 6. 2 IN 1 / 4 IN 1 COPYING This f eature allows multiple originals to be reduced and copied onto a single sheet of paper . There are two modes: 2 IN 1 cop ying, where two or iginals are reduced and copied onto a single sheet, and 4 IN 1 cop ying, where four originals are reduced and copied onto a single sheet. In ad ...

  • Toshiba e-studio 45 - page 73

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 2 USING THE EDITING FUNCTIONS 6. 2 IN 1 / 4 IN 1 COPYING (Cont.) 3 Select the type of image combination. • Press the 2IN1 (or 4IN1 , 2IN1 DUPLEX or 4IN1 DUPLEX ) ke y . 4 Select the type of the original. • Press 1 SIDE (or 2 SIDE ) k ey . Select other cop y modes as required. 5 Press the ST ART key . When Placing ...

  • Toshiba e-studio 45 - page 74

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 3 7. COPYING WITH ANNO T A TION ADDED 1 Set the original(s). Pa ge 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the ANNO T A TION key . • If the k ey f or the desired function is not shown, press the Ne xt key to s witch the screen. Copies are made with the current date and time, at which the y a ...

  • Toshiba e-studio 45 - page 75

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 4 USING THE EDITING FUNCTIONS 8. P A GE NUMBERING COPYING This f eature allows page numbers to be added at a specified position to copies. 1 Set the original(s). Pa ge 2-4 2 Press the EDIT key to enter the editing menu. Then, press the P A GE NUMBER key . • If the k ey f or the desired function is not shown, press t ...

  • Toshiba e-studio 45 - page 76

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 5 When Placing an Original on the Glass 6 When the first page has been scanned, set the next page and press the ST ART key . • Y ou can also press the YES key bef ore pressing the ST ART k ey to perf orm the same operation. 7 Repeat step 6 f or the second and subsequent origi- nals. 8 Once the final original has bee ...

  • Toshiba e-studio 45 - page 77

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 6 USING THE EDITING FUNCTIONS 9. MA GAZINE SOR T COPYING (FR OM EDITING MENU) Select other cop y modes as required. 4 Press the ST ART ke y . 1 Set the original(s). Pa ge 2-4 2 Press the EDIT ke y to enter the editing menu. Then, press the MA GAZINE SORT key . • If the k ey f or the desired function is not shown, pr ...

  • Toshiba e-studio 45 - page 78

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 7 When Placing an Original on the Glass 5 When the first page has been scanned, set the next page and press the ST ART key . • Y ou can also press the YES key bef ore pressing the ST ART k ey to perf orm the same operation. 6 Repeat step 5 for the second and subsequent cop- ies. 7 Once the final original has been sc ...

  • Toshiba e-studio 45 - page 79

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 8 USING THE EDITING FUNCTIONS 10. CO VER SHEET COPYING 2 Press the EDIT key to enter the editing men u. Then, press the CO VER SHEET ke y . • If the k ey f or the desired function is not shown, press the Next k ey to s witch the screen. A top cov er and/or back cov er (special sheets, eg. colored paper) can be added ...

  • Toshiba e-studio 45 - page 80

    1 2 3 4 5 6 7 8 9 10 11 12 4-1 9 3 Press the desired Cover Sheet ke y: T o add a blank top co ver .................................. TOP BLANK T o add a copied top cov er .............................. TOP COPIED T o add blank top and bac k cov ers ................. BO TH BLANK T o add copied top and blank bac k cov ers ............................ ...

  • Toshiba e-studio 45 - page 81

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 0 USING THE EDITING FUNCTIONS 11. SHEET INSERTION COPYING Special sheets of paper (such as colored paper) are inser ted into a set of copies at specified pages. There are two Sheet Insertion modes av ailable: • Inser ting b lank sheets before specified pages • Inser ting copied sheets at specified pages Example of ...

  • Toshiba e-studio 45 - page 82

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 1 4 Press the desired Insertion mode key . T o inser t blank sheets bef ore specified pages ........ BLANK T o inser t copied sheets at specified pages ........... COPIED 5 Using the digital keys, key in the desired page num- ber f or inser tion and press the NEXT key . • On the displa y , the page where the first s ...

  • Toshiba e-studio 45 - page 83

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 2 USING THE EDITING FUNCTIONS 12. DOCUMENT ST ORA GE This feature allo ws images of the or iginals to be stored on the hard disk of the copier , and copies can be made from the hard disk later . This copying method consists of the f ollowing two modes: y MEMORIZE mode ....... Stores original images at the specified lo ...

  • Toshiba e-studio 45 - page 84

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 3 5 Press the ST ART ke y . • The memorization process star ts automatically . Tips • T o change the file name, select the ID y ou want to change in the list on the displa y , press the file name column, delete the file name already entered with the B Space ke y in the letter entry screen, then enter a new file na ...

  • Toshiba e-studio 45 - page 85

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 4 USING THE EDITING FUNCTIONS 13. DIRECTION OF COPY IMA GES (RO T A TION) This mode allows y ou to specify the direction of images being scanned. When copying in the 1-sided originals to 2-sided copies mode, 2-sided originals to 1-sided copies mode or dual-page mode, you can select the direction of images as sho wn be ...

  • Toshiba e-studio 45 - page 86

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 5 When Using the Rever sing A utomatic Document Feeder (optional) 1 Set the original(s). Page 2-4 2 Press the EDIT key to enter the editing men u. Then, press the IMA GE DIRECTION ke y . • If the k ey f or the desired function is not shown, press the Ne xt key to s witch between the screen. 3 Press the IMA GE DIRECT ...

  • Toshiba e-studio 45 - page 87

    1 2 3 4 5 6 7 8 9 10 11 12 4-2 6 USING THE EDITING FUNCTIONS 5 When the final original has finished being scanned, press the FINISHED key . 13. DIRECTION OF COPY IMA GES (R O T A TION) (Cont,) ...

  • Toshiba e-studio 45 - page 88

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 5. USING THE SPECIAL FUNCTIONS 1. Continuous or iginal f eeding/Single original feeding ................. 5-2 2. Copying mix ed-sized originals .................................................. 5-4 3 . Job memor y cop ying ................................................................ 5-5 4. Copying on special type ...

  • Toshiba e-studio 45 - page 89

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 USING THE SPECIAL FUNCTIONS 1. CONTINUOUS ORIGINAL FEEDING/SINGLE ORIGINAL FEEDING When using the rev ersing automatic document feeder (optional), y ou can select the continuous f eed mode (default setting) where m ultiple (or single) or iginals are continuously f ed in one by one, or the single-f eed mode where, if y ...

  • Toshiba e-studio 45 - page 90

    1 2 3 4 5 6 7 8 9 10 11 12 5-3 Single-feed Mode 1 Press the PR OGRAM ke y to enter the program menu, and press the ADF ke y . • If the k ey f or the desired function is not shown, press the Pre ke y to s witch the screen. 2 Press the SADF key . Select other cop y modes as required. 3 Set the original(s). Page 2-6 • The or iginal is automaticall ...

  • Toshiba e-studio 45 - page 91

    1 2 3 4 5 6 7 8 9 10 11 12 5-4 USING THE SPECIAL FUNCTIONS 2. COPYING MIXED-SIZED ORIGINALS 1 Set the original(s). Pa ge 2-6 • LD and L T sized originals or LG and L T originals can be mix ed. 2 Press the PR OGRAM key to enter the pr ogram menu. Then, press the MIXED ORIGINAL SIZES key . • If the k ey f or the desired function is not shown, pre ...

  • Toshiba e-studio 45 - page 92

    1 2 3 4 5 6 7 8 9 10 11 12 5-5 3. JOB MEMOR Y COPYING Storing a Combination of Copy Modes 1 Select the desired copy modes. Example: Reproduction ratio ......................................................... 7 1% Copy quantity ........................................................ 10 copies Cop y density ......................................... ...

  • Toshiba e-studio 45 - page 93

    1 2 3 4 5 6 7 8 9 10 11 12 5-6 USING THE SPECIAL FUNCTIONS 3. JOB MEMOR Y COPYING (Cont.) Recalling and Cop ying a Stored Combination of Cop y Modes 1 Set the original(s). Pa ge 2-4 2 Press the PR OGRAM key to enter the pr ogram menu. Then, press the JOB MEMOR Y key . • If the k ey f or the desired function is not shown, press the PRE ke y to swi ...

  • Toshiba e-studio 45 - page 94

    1 2 3 4 5 6 7 8 9 10 11 12 5-7 Confirming Stored Copy Modes T o confir m the cop y modes stored in the MEMOR Y ke y , perf or m steps 2 to 4 on page 5-6, then press the SETTINGS key . • The screen on the r ight is an e xample. ...

  • Toshiba e-studio 45 - page 95

    1 2 3 4 5 6 7 8 9 10 11 12 5-8 USING THE SPECIAL FUNCTIONS 4. COPYING ON SPECIAL TYPES OF P APER 1 Set the original(s). P age 2-4 2 Place the paper on the sheet b ypass and set the paper size . • Bypass cop ying Page 3-4 3 Press the PR OGRAM ke y to enter the program menu. Then, press the SPECIAL P APER key . • If the k ey f or the desired func ...

  • Toshiba e-studio 45 - page 96

    1 2 3 4 5 6 7 8 9 10 11 12 5-9 Outputting T ransparency (OHP) Films on Inner T r a y T o output the transparency (OHP) films on the inner tra y , install the guide f or it on the inner tray . * If the optional finisher is installed, this operaion is not required since the films e xit on the finisher tray . 1 Remove the guide whic h is used for the ...

  • Toshiba e-studio 45 - page 97

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 0 USING THE SPECIAL FUNCTIONS 5. WEEKL Y TIMER Setting the W eekly Timer 1 Press the PR OGRAM ke y to enter the program menu. Then, press the WEEKL Y TIMER key . • If the k ey f or the desired function is not shown, press the Pre ke y to switch between the screens . 2 Check the settings on the displa y , and if they ...

  • Toshiba e-studio 45 - page 98

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 1 Y ou can cancel the operation of the weekly timer so that the copier can be turned ON and OFF nor mally by the pow er s witch. Canceling the Use of the W eekly Timer 1 Press the PR OGRAM key to enter the pr ogram menu. Press the WEEKL Y TIMER key to remo ve the shading pattern. Tip The ON/OFF times of the weekly tim ...

  • Toshiba e-studio 45 - page 99

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 2 USING THE SPECIAL FUNCTIONS 6. SETTING THE O THER P APER SIZES (O THER KEY) Y ou can easily make copies using non-American sizes such as European sizes (A5~A3). 4 Press the COPY SIZE key of the paper correspond- ing to the size that has been set in the bypass guide. 5 Press the B ASIC key to enter the basic menu, th ...

  • Toshiba e-studio 45 - page 100

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 3 7. SETTING THE D A TE AND TIME The clock b uilt in to the copier can be set to work by entering the date, day of the w eek and time using the digital ke ys. Also , y ou can easily change the clock to and from the da ylight saving time system at the touch of a ke y . 1 Press the PR OGRAM key to enter the pr ogram men ...

  • Toshiba e-studio 45 - page 101

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 4 USING THE SPECIAL FUNCTIONS 8. SETTING A UT OMA TIC ENERGY SA VING MODE Setting the Automatic Ener gy Saving Mode 1 Press the PR OGRAM key to enter the pr ogram menu. Then, press the ENERGY SA VE key . • If the ke y for the desired function is not shown, press the Next k ey to s witch the screen. 2 On the display ...

  • Toshiba e-studio 45 - page 102

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 5 2 On the displa y , select the period of time (in minutes) allo wed before the A utomatic Shutoff mode is acti- v ated. • The setting procedure finishes and the display returns to the program men u screen. 9. SETTING A UT OMA TIC SHUT OFF MODE If you set an automatic shutoff time , the copier will automatically go ...

  • Toshiba e-studio 45 - page 103

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 6 USING THE SPECIAL FUNCTIONS 10. SWITCHING BETWEEN LANGU A GES The language used on the touch panel can be changed to diff erent language. 1 Press the PR OGRAM ke y to enter the program menu. Then, press the CHANGE LANGU A GES key . • If the k ey f or the desired function is not shown, press the Ne xt key to s witc ...

  • Toshiba e-studio 45 - page 104

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 7 11. DEP AR TMENT CODES Y ou can administer the copy quantity of each group b y setting a depar tment code for each purpose (cop ying, pr inter and F AX). Up to 50 codes can be set. * Y ou need a master code to be input when you use this function f or the first time. 1 Press the PROGRAM ke y to enter the pr ogram men ...

  • Toshiba e-studio 45 - page 105

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 8 USING THE SPECIAL FUNCTIONS 11. DEP AR TMENT CODES (Cont.) Clearing All Counters This function clears all counters to “000000”. * The total counter ( P age 1-8) cannot be cleared. 1 Press the RESET ALL COUNTERS key in the de- partment code menu. 2 Press the YES key . • The counter is reset to “000000”. Reg ...

  • Toshiba e-studio 45 - page 106

    1 2 3 4 5 6 7 8 9 10 11 12 5-1 9 3 Press the SET key to register a master code. • If the master code has already been registered, the screen on step 6 will be display ed. 4 Input a master name and press the SET key . • Enter ing letters P age 5-24 6 Select the department number where you want to register the department code, and press the CHANG ...

  • Toshiba e-studio 45 - page 107

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 0 USING THE SPECIAL FUNCTIONS 3 The confirmation screen f or depar tment code change is displa yed. Press the SET key . 2 Select the department code number you want to change, and press the CHANGE key . Changing the Department Code of a Specific Department 1 Press the SET DEP ARTMENT CODES ke y in the department code ...

  • Toshiba e-studio 45 - page 108

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 1 4 Input the department name and press the SET key . • Enter ing letters P age 5-24 5 Using the digital ke ys, enter the current department code f or CURRENT CODE , and the code y ou want to register both f or NEW CODE and f or RETYPE NEW CODE , and press the lowe r SET key . • The depar tment code is 5 digits (? ...

  • Toshiba e-studio 45 - page 109

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 2 USING THE SPECIAL FUNCTIONS Clearing a Specific Department Counter 1 Press the SET DEP ARTMENT CODES ke y in the department code menu. 2 Press the ENABLE key , then the SET key . 3 Select the department number you want to delete, and press the DELETE key . 4 Press the YES key . 11. DEP AR TMENT CODES (Cont.) ...

  • Toshiba e-studio 45 - page 110

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 3 3 Select the department number where you want to c lear the counter , and press the RESET COUNTERS key . 4 Press the YES key . 2 Press the DISABLE key . • If y ou hav e pressed this ke y , you ha ve to register the master code again. Disabling the Department Codes 1 Press the SET DEP ARTMENT CODES ke y in the depa ...

  • Toshiba e-studio 45 - page 111

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 4 USING THE SPECIAL FUNCTIONS 12. ENTERING LETTERS The f ollowing screen is provided f or enter ing letters. * F or entering numbers, use the digital k e ys on the control panel. The follo wing ke ys are used for entering letters. • CapsLock ..................... Press this k ey to s witch capital letters and small ...

  • Toshiba e-studio 45 - page 112

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 5 4 Press the SET ke y to fix the entered letters. 3 Press the S , H , I , B and A keys. Correcting Entered Letters Example : Correct “T oshiba” to “T OSHIBA”. 1 Press the B Space key to delete “oshiba”. 2 Press the CapsLock ke y to enter the capital letters. ...

  • Toshiba e-studio 45 - page 113

    1 2 3 4 5 6 7 8 9 10 11 12 5-2 6 USING THE SPECIAL FUNCTIONS 4 Press the ke y to move the cur sor to (under) “A”. 3 Press the O , S , H , I , V and A keys. 5 Press the B Space key to delete “V”. 6 Press the B key to enter “B”, then the SET ke y to fix the entered letters. 12. ENTERING LETTERS (Cont.) ...

  • Toshiba e-studio 45 - page 114

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 6. SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 1. Finishing modes and finishers (optional) ................................... 6-2 2. Sor t/group cop ying .................................................................... 6-3 3. Staple mode ............................................................... ...

  • Toshiba e-studio 45 - page 115

    1 2 3 4 5 6 7 8 9 10 11 12 6-2 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 1. FINISHING MODES AND FINISHERS (OPTIONAL) There are 3 types of optional finishers (MJ-1011, MJ-1012 and MJ-1013). Functions availab le differ depending on the type of the finisher installed. • Press the k ey on the basic screen on the right (shaded), and con ...

  • Toshiba e-studio 45 - page 116

    1 2 3 4 5 6 7 8 9 10 11 12 6-3 2. SOR T/GROUP COPYING The def ault setting for the finishers is Non-sor t mode, ho wev er , you can produce sor ted copies or grouped copies as required. • Example : Making 5 sets of copies from 5-page or iginals 4 4 4 4 4 3 3 3 3 3 5 5 5 5 5 5 4 3 2 1 2 2 2 2 2 1 1 1 1 1 5 4 3 2 1 5 4 3 2 1 5 4 3 2 1 5 4 3 2 1 5 4 ...

  • Toshiba e-studio 45 - page 117

    1 2 3 4 5 6 7 8 9 10 11 12 6-4 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) When Placing an Original on the Glass 5 Place the next original (or 2nd side) and press the ST ART ke y . • Y ou can press the YES ke y and then the ST ART k ey to do the same operation. • Repeat the abov e procedure until all your originals hav e been scann ...

  • Toshiba e-studio 45 - page 118

    1 2 3 4 5 6 7 8 9 10 11 12 6-5 3. ST APLE MODE 1 Set the originals. Pa ge 2-4 When the optional finisher is installed, you can use the function that automatically staples at one of the f ollowing three positions. * Only SINGLE-1 is av ailable f or the hanging type finisher (MJ-1011) . • SINGLE-1 is selected: Finish Set on the Re versing A utomati ...

  • Toshiba e-studio 45 - page 119

    1 2 3 4 5 6 7 8 9 10 11 12 6-6 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 3 Press the SINGLE-1 (or DOUBLE or SINGLE-2 ) key . Select other copy modes as required. 4 Press the ST ART ke y . Model name MJ-1011 MJ-1012 MJ-1013 Maximum capacity f or stapling 30 sheets: L T , L T -R 20 sheets: LG 15 sheets: LD , COMP 50 sheets: L T 30 shee ...

  • Toshiba e-studio 45 - page 120

    1 2 3 4 5 6 7 8 9 10 11 12 6-7 1 Set the originals. Page 2-4 2 Press the key on the basic screen as sho wn on the right (shaded). 3 Press the AL TERNA TION key . 4 Select L T size of paper . • When y ou select L T , mak e sure that an L T -R cassette is also installed. Select other copy modes as required. 5 Press the ST ART key . 4. AL TERNA TE S ...

  • Toshiba e-studio 45 - page 121

    1 2 3 4 5 6 7 8 9 10 11 12 6-8 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 5. HOLE PUNCHING MODE 1 Set the originals. Page 2-4 2 Press the key on the basic screen as sho wn on the right (shaded). With the optional punching unit attached to the optional finisher (MJ-1012 or MJ-1013 only), you can hav e your copies punched with holes. * ...

  • Toshiba e-studio 45 - page 122

    1 2 3 4 5 6 7 8 9 10 11 12 6-9 6. MA GAZINE SOR T & SADDLE STITCHING MODE When the Magazine Sor t mode is selected, copies are made so that they can be bound lik e magazines. When the finisher with saddle stitcher (optional, MJ-1013) is installed, you can select the saddle stitch- ing mode which will automatically staple in the center of the do ...

  • Toshiba e-studio 45 - page 123

    1 2 3 4 5 6 7 8 9 10 11 12 6-1 0 SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS) 3 Press the MA GAZINE SORT (or MA GAZINE SORT & SADDLE STITCH or SADDLE STITCH ) key . Select other copy modes as required. 4 Press the ST AR T key . 6. MA GAZINE SOR T & SADDLE STITCHING MODE (Cont.) 2 Press the key on the basic screen as sho wn on th ...

  • Toshiba e-studio 45 - page 124

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 7. WHEN GRAPHIC SYMBOLS FLASH ON THE T OUCH P ANEL 1. Description of the flashing graphic symbols ............................. 7-2 2. Add paper symbol .................................................................... 7-3 • Adding paper to the cassettes ............................................................ ...

  • Toshiba e-studio 45 - page 125

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 1. DESCRIPTION OF THE FLASHING GRAPHIC SYMBOLS The graphic displa y on the touch panel shows the sta- tus of the copier . When one of the gr aphic symbols flashes, take the appropriate action ref erring to page shown. FUSER MISFEED Symbol Flashes when a paper misfeed occu ...

  • Toshiba e-studio 45 - page 126

    1 2 3 4 5 6 7 8 9 10 11 12 7-3 2. ADD P APER SYMBOL Adding P aper to the Cassettes When the paper supply in the selected cassette or the large-capacity feeder (optional) runs out, the cassette or large-capacity f eeder shown on the display flashes, and the f ollowing message appears: Add paper Add paper as follo ws. 1 Pulling up the cassette grip, ...

  • Toshiba e-studio 45 - page 127

    1 2 3 4 5 6 7 8 9 10 11 12 7-4 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL B A 2. ADD P APER SYMBOL (Cont.) Adding P aper to the Lar ge-Capacity Feeder (optional) 1 Pulling up the grip, draw out the lar ge-capacity feeder carefull y until it comes to a stop. 2 Open some paper pack ages, take out entire reams of paper and set them aligned in tra ...

  • Toshiba e-studio 45 - page 128

    1 2 3 4 5 6 7 8 9 10 11 12 7-5 T -3500 NET 450 gr FOR e-STUDIO45/35 COMPONENTS: Styrene acrylate copolymer,Carbon blac k (1333-86-4), Organic Pigment HANDLE WITH CARE. STORE IN A DR Y PLACE BELOW 35 C(95 F). READ THE OPERA TING INSTRUCTIONS OF THE MACHINE BEFORE USING. SHAKE WELL BEFORE USING. MANIPULER AVEC PRECA UTION. GARDER DANS UN ENDROIT SANS ...

  • Toshiba e-studio 45 - page 129

    1 2 3 4 5 6 7 8 9 10 11 12 7-6 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL Removing the T oner Car tridge 4 Pushing on the c l a w, lower the cartridg e holder to- war d you. Car tridge 3. REPLA CE T ONER CARTRIDGE SYMBOL (Cont.) B A Removing the T oner Bag 2 Move the toner ba g in the direction of the arrow and release it fr om par t A A A A A ...

  • Toshiba e-studio 45 - page 130

    1 2 3 4 5 6 7 8 9 10 11 12 7-7 8 Pull out the seal in the direction of the arr ow as shown on the right. Installing a New T oner Car tridge 7 Shake the new toner cartridge well to loosen the con- tents. 5 Rotate the car tridge so that the arro w on its side appears in the position sho wn on the right. 6 Pull the cartridg e out carefully . Note Plea ...

  • Toshiba e-studio 45 - page 131

    1 2 3 4 5 6 7 8 9 10 11 12 7-8 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL Installing a New T oner Bag 11 Install the new toner ba g by rever sing the procedure used f or removing one. • Ref er to the procedure in steps 2 and 3 on page 7-6. 3. REPLA CE T ONER CARTRIDGE SYMBOL (Cont.) 9 Holding the cartridg e so that the arr ow on its lower sid ...

  • Toshiba e-studio 45 - page 132

    1 2 3 4 5 6 7 8 9 10 11 12 7-9 Type of originals A. B. C. Ａ Ａ Ａ Ａ 5,000 10,000 Ａ Ａ Ａ Ａ Ａ Ａ Ａ Ａ Ｃ Ｃ Ｃ Ｃ 15,000 Ｂ Ｂ Ｂ Ｂ 20,000 Additional Explanation The lif e of the toner car tridge (number of copies) varies depending on the f ollowing conditions. 1. ...

  • Toshiba e-studio 45 - page 133

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 0 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 4. CLEAR P APER SYMBOL Paper Misf eed in the Rever sing A utomatic Document Feeder (optional) • Remov e any misf ed originals. 2 Rotate the blue knob on y our side in the direction of the arro w and remove an y misfed originals. When a paper misf eed occurs in the cop ...

  • Toshiba e-studio 45 - page 134

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 1 6 Remove an y misfed originals. 3 Lift the blue handle. 4 Rotate the blue knob on y our side to remove an y misfed originals. 5 Lift the original feeding tra y . • By rotating the knob in the direction in the opposite direc- tion of pre vious illustration, y ou can also remov e misfed origi- nals from the side sho ...

  • Toshiba e-studio 45 - page 135

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 2 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 4. CLEAR P APER SYMBOL (Cont.) A 8 Remove an y misfed originals. P aper Misfeed in the Cassette Feeding Area 1 Open the cover A A A A A . 7 Move the blue knob to ward the fr ont. 2 Remove an y misfed paper . ...

  • Toshiba e-studio 45 - page 136

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 3 B P aper Misfeed in the Large-Capacity Feeder (optional) 1 Open the co ver B B B B B . 2 Remove an y misfed paper . P aper Misfeed on the Bypass Feed Unit 1 Pull out misfed paper on the b ypass guide . • Reset the sheets of paper on the b ypass guide. Tip Paper Misf eed in the Paper Feed P edestal (optional) • O ...

  • Toshiba e-studio 45 - page 137

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 4 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL P aper Misfeed in the Jam Releasing Unit 1 Making sure that the bypass guide and the automatic duplexer are opened, pull out the two blue knobs and push down the tw o fuser pressure release le- ver s. 2 Holding the jam releasing unit, open it. P aper Misfeed in the A ut ...

  • Toshiba e-studio 45 - page 138

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 5 3 Rotate the blue knob indicated with an arr ow to ward the inside and remove an y misfed paper . • After ha ving remov ed the paper, be sure to close the both sides of the jam releasing unit cov er fir mly . P aper Misfeed in the Fuser Unit 1 Making sure that the bypass guide, the automatic duplex er and the jam ...

  • Toshiba e-studio 45 - page 139

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 6 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 2 Remove an y misfed paper inside the rela y unit. P aper Misfeeds in the Rela y Unit 1 Holding the co ver handle of the relay unit, open it. • If paper is misf ed at the inner par t of the relay unit, remo ve it pushing down the blue le ver . • Remov e the misf ed ...

  • Toshiba e-studio 45 - page 140

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 7 3 Rotate the blue knob to locate the arr ow within the area on the label. • Under this condition, the punchers are up , allowing the pa- per shown in the figure to be remov ed. P aper Misfeed in the Finisher (optional) When using the console type: 1 Raise the hole punching unit (optional). P aper Misfeed in the Ho ...

  • Toshiba e-studio 45 - page 141

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 8 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL When using the Hanging type: 1 By pulling the lever , move the finisher carefull y awa y from the copier . 4 Remove an y misfed paper in the paper e xit area. 3 Lifting knob y y y y y or knobs y y y y y and x x x x x , remove any misf ed paper . 2 Open the upper finishe ...

  • Toshiba e-studio 45 - page 142

    1 2 3 4 5 6 7 8 9 10 11 12 7-1 9 2 Lifting the blue le ver , pull out an y misfed paper . 3 Remove an y misfed paper in the paper e xit area. P aper Misf eed in the Saddle Stitching Unit (optional) 1 Pressing the b utton shown with the arro w , move the finisher aw a y from the copier . 2 Open the saddle stitc her cover and remo ve any misfed paper ...

  • Toshiba e-studio 45 - page 143

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 0 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 3 Open the lower co ver of the finisher . 4 T urn the right-hand knob counterc lockwise. 5 Pushing the left-hand knob, turn it c lockwise. 6 Remove an y paper misfed on the exit side of the saddle stitcher . 7 Open the exit co ver of the saddle stitcher and re- move an ...

  • Toshiba e-studio 45 - page 144

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 1 5. ADDING ST APLES When the staple car tridge r uns out of staples, the f ollowing message appears: Set staple car tridge Add staples to the car tridge according to the procedure below . Console-T ype Finisher 1 Open the front finisher co ver . 2 Lower the blue le ver in the stapler and slide out the staple car trid ...

  • Toshiba e-studio 45 - page 145

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 2 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 5. ADDING ST APLES (Cont.) 4 Push in a new staple case into the staple cartridge completely inside until a c lick is hear d. • Do not remov e the seal holding the staples before the staple case is set in the car tridge. 5 Pull out the seal holding the staples straight ...

  • Toshiba e-studio 45 - page 146

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 3 Saddle Stitching Unit 1 Open the lower co ver of the finisher . 2 Slide out the sad dle stitching unit carefully to ward the front. 3 Pull out the grip of the saddle stitch holder to ward y ou and turn it 90 degrees clockwise. 4 Remove the empty staple case and set a ne w one . • Replace both staple cases with ne ...

  • Toshiba e-studio 45 - page 147

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 4 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL Note If test stapling f ails to be performed and the follo wing mes- sage remains displa yed, repeat the abov e procedure from steps 1 to 7. Set staple car tridge Hanging-T ype Finisher 1 By pulling the lever , move the finisher a way care- fully fr om the copier . 2 Ho ...

  • Toshiba e-studio 45 - page 148

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 5 6. REMO VING J AMMED ST APLES When copies hav e not been stapled in the staple mode, check if the f ollowing message is shown on the displa y : Examine stapler If the message is shown, staples ha ve been jammed. Remove them as described below . A A Console-T ype Finisher 1 P erf orm steps 1 and 2 of the procedure f ...

  • Toshiba e-studio 45 - page 149

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 6 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 6. REMO VING JAMMED ST APLES (Cont.) 1 2 2 5 Slide the staple cartridg e bac k into the stapler • Push the staple car tridge in until it is caught by the cla w and fix ed with a click sound. 6 Close the front finisher co ver . 3 While pushing down on le ver y y y y y ...

  • Toshiba e-studio 45 - page 150

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 7 5 Return the staple case to its original position. 6 Return the saddle stitch holder and the sad dle stitch- ing unit to their original positions. 7 Close the lower finisher co ver . Hanging-T ype Finisher 1 P erform steps 1 and 2 of the pr ocedure f or “5. ADD- ING ST APLES Hanging-T ype Finisher ” ( Page 7- 24 ...

  • Toshiba e-studio 45 - page 151

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 8 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 7. CLEAR ING A CCUMULA TED PUNCHED P APER BITS When paper bits punched from copies ha ve accum ulated to a cer tain lev el, the f ollowing message appears. Please Dispose of Hole Punch Dust Dispose of the paper bits as described below . Inside the Finisher 1 Open the co ...

  • Toshiba e-studio 45 - page 152

    1 2 3 4 5 6 7 8 9 10 11 12 7-2 9 8. CALL SER VICE SYMBOL When the CALL SER VICE symbol flashes, the follo wing message appears and copying is no longer possible . T ur n off the PO WER s witch and call your ser vice technician. Call f or ser vice When the CALL SER VICE or CLEAR P APER symbol is flashing, if you press the CLEAR/ST OP ke y and the di ...

  • Toshiba e-studio 45 - page 153

    1 2 3 4 5 6 7 8 9 10 11 12 7-3 0 WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH P ANEL 9. PERIODIC MAINTENANCE MESSA GE When the f ollowing message has appeared on the displa y panel: Time for periodic maintenance This indicates that assistance from a qualified service technician is required. Call your ser vice techni- cian f or assistance. ...

  • Toshiba e-studio 45 - page 154

    1 2 3 4 5 6 7 8 9 10 11 12 8-1 8. MAINTENANCE 1. Daily inspection ......................................................................... 8-2 2. Simple troub leshooting .............................................................. 8-4 ...

  • Toshiba e-studio 45 - page 155

    1 2 3 4 5 6 7 8 9 10 11 12 8-2 MAINTENANCE 1. D AIL Y INSPECTION Items for Dail y Check Main power switc h ON/OFF status • W e recommend tur ning the main power s witch ON at star tup e veryda y so that copies can be made whenev er you w ant. Also , be sure to tur n the main pow er s witch OFF when you leav e the office. • Do not turn the main ...

  • Toshiba e-studio 45 - page 156

    1 2 3 4 5 6 7 8 9 10 11 12 8-3 Cleaning the Charger If the inside of the charger and the wire become dir ty , the dir t may appear on the cop y . * Before star t cleaning, BE SURE TO TURN OFF THE MAIN POWER SWITCH, then open the front co ver . 1 Open the front co ver . 2 Clean the char g er . • Hold the cleaning knob , pull it out slowly and full ...

  • Toshiba e-studio 45 - page 157

    1 2 3 4 5 6 7 8 9 10 11 12 8-4 MAINTENANCE 2. SIMPLE TR OUBLESHOO TING Check the f ollowing items, and if the prob lem still occurs, call ser vice f or assistance. Copy density is too lo w Replace the toner car tridge. Set the image density properly with the manual density ke ys . P age 7-5 P age 3-16 Has the message “Add toner” ap- peared on t ...

  • Toshiba e-studio 45 - page 158

    1 2 3 4 5 6 7 8 9 10 11 12 8-5 Copies are stained Counter measure Close the cov er firmly to shut out any outer light. Clean the original glass with a cloth moistened with cleaning liquid, then wipe a dr y cloth ov er the glass. Clean the original cover or tr anspor t belt with a cloth moistened with a neutral detergent. Then wipe the detergent com ...

  • Toshiba e-studio 45 - page 159

    1 2 3 4 5 6 7 8 9 10 11 12 8-6 MAINTENANCE ...

  • Toshiba e-studio 45 - page 160

    1 2 3 4 5 6 7 8 9 10 11 12 9-1 9. SPECIFICA TIONS & OPTIONS 1. e-STUDIO45/35 specifications .................................................. 9-2 2. Specifications of options ............................................................ 9-3 3. P ack ing list ................................................................................. 9-6 ...

  • Toshiba e-studio 45 - page 161

    1 2 3 4 5 6 7 8 9 10 11 12 9-2 SPECIFICA TIONS & OPTIONS Model Name DP-4500/3500 T y pe Desktop type (Console type when the paper feed pedestal is installed) Or iginal Glass Fixed (original ref erenced to top left , referenced to center when us- ing rev ersing automatic document f eeder) Copying System Indirect electrophotographic method De vel ...

  • Toshiba e-studio 45 - page 162

    1 2 3 4 5 6 7 8 9 10 11 12 9-3 *Specifications and appearance are subject to change without notice in the interest of product improv ement. 2. SPECIFICA TION OF OPTIONS Reversing A utomatic Document Feeder Model Name MR-3012 Copy Sides Single-side, Duple x Number of Or iginals Up to 100 originals (13~22 lb.) or up to 0.63” of height of originals ...

  • Toshiba e-studio 45 - page 163

    1 2 3 4 5 6 7 8 9 10 11 12 9-4 SPECIFICA TIONS & OPTIONS 2. SPECIFICA TION OF OPTIONS (Cont.) Finisher Model Name MJ-1011 MJ-1012 MJ-1013 T y pe Hanging T ype Floor T ype Floor T ype Copy Size LD , LG, L T , L T -R, ST , ST -R P aper Thickness 17~22 lb . 16 lb. Bond ~110 lb . Index Number of Copies 30 sheets (L T ,L T -R) 50 sheets (L T) Staple ...

  • Toshiba e-studio 45 - page 164

    1 2 3 4 5 6 7 8 9 10 11 12 9-5 Hole Puncher (Options f or MJ-1012/MJ-1013) Japan and most of Europe (MJ-6001E) Nor th America (MJ-6001N) F rance (MJ-6001F) Sweden (MJ-6001S) Number of punch holes and hole diameter 2 holes (6.5 mm dia.) 2/3 holes s witchable (8.0 mm or 0.31”dia.) 4 holes (6.5 mm dia.; 80 mm pitch) 4 holes (6.5 mm dia; 70, 21 mm pi ...

  • Toshiba e-studio 45 - page 165

    1 2 3 4 5 6 7 8 9 10 11 12 9-6 SPECIFICA TIONS & OPTIONS 3. P A CKING LIST Operator’ s Manual W arr anty Sheet P acking List Unpacking Instructions Set-up Instructions Operator’ s Manual P ocke t ...

  • Toshiba e-studio 45 - page 166

    This Operator's Man ual is printed with ink containing soy oil. 1-1, KAND A NISHIKI-CHO , CHIY OD A-KU , T OKY O , 101-8442, J AP AN © Copyright T OSHIBA TEC CORPORA TION 2000 ALL RIGHTS RESER VED 4420456102 IN-D-322, 01-04 SO DIGIT AL PLAIN P APER COPIER OPERA T OR'S MANU AL FOR COPYING FUNCTIONS ...

Manufacturer Toshiba Category Printer

Documents that we receive from a manufacturer of a Toshiba e-studio 45 can be divided into several groups. They are, among others:
- Toshiba technical drawings
- e-studio 45 manuals
- Toshiba product data sheets
- information booklets
- or energy labels Toshiba e-studio 45
All of them are important, but the most important information from the point of view of use of the device are in the user manual Toshiba e-studio 45.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Toshiba e-studio 45, service manual, brief instructions and user manuals Toshiba e-studio 45. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Toshiba e-studio 45.

Similar manuals

A complete manual for the device Toshiba e-studio 45, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Toshiba e-studio 45 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Toshiba e-studio 45.

A complete Toshiba manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Toshiba e-studio 45 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Toshiba e-studio 45, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Toshiba e-studio 45, that we can find in the current document
3. Tips how to use the basic functions of the device Toshiba e-studio 45 - which should help us in our first steps of using Toshiba e-studio 45
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Toshiba e-studio 45
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Toshiba e-studio 45 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Toshiba e-studio 45?

Use the form below

If you did not solve your problem by using a manual Toshiba e-studio 45, ask a question using the form below. If a user had a similar problem with Toshiba e-studio 45 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)