English dropdown-ico

Manual Graco 288513

10 pages 1.96 mb
Download

Go to site of 10

Summary
  • Graco 288513 - page 1

    Instructions G40 Air Assisted Spray Gun 311937G EN For the application of architectural paints and coatings. For professional use only. Model: 288513, 289604 Maximum Working Pressure: 4000 psi (280 bar, 28 MPa) Maximum Air Working Pressure: 100 psi (7 bar, 0.7 MPa) IMPORTANT SAFETY INSTRUCTIONS. Refer to your sprayer instruction manual for Pressure ...

  • Graco 288513 - page 2

    Warnings 2 311937G Warnings The following Warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclamation point symbol alerts you to a general warning and hazard symbols refer to procedure-specific risks. Refer back to these Warnings. Additional, product-specific warnings may be found throughout the body of thi ...

  • Graco 288513 - page 3

    Warnings 311937G 3 PRESSURIZED ALUMINUM PARTS HAZARD Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage. PERSONAL ...

  • Graco 288513 - page 4

    Warnings 4 311937G Pressure Relief Procedure Follow this Pressure Relief Procedure whenever instructed to relieve pressure, stop spraying, check or service equipment, or install or clean spray tip. 1. Lock trigger. Turn OFF power and turn pressure control to lowest pressure setting. 2. Unlock trigger. Hold gun against side of flushing pail. Trigger ...

  • Graco 288513 - page 5

    Warnings 311937G 5 Clearing a Clog 1. Relieve pressure . Lock trigger (1a). 2. Rotate tip (33) 180°. Unlock trigger (1a). Trigger gun into pail or onto ground to remove clog. 3. Lock trigger (1a). Rotate tip (33) 180° back to spray position. Spraying Refer to your Sprayer Instruction manual. The following instructions are for guns used with Graco ...

  • Graco 288513 - page 6

    Warnings 6 311937G 14. If the diffuser (5) was removed, trigger the gun while you reinstall the diffuser with the gun tool (30). Tighten the diffuser securely to obtain a good seal. Torque to 155-165 in-lb (18-19 N.m). When properly tightened, the flange will bottom out on the gun. 15. Install tip (33) and guard (6) on gun, page 4. 16. Using a soft ...

  • Graco 288513 - page 7

    Warnings 311937G 7 Fluid Tube Replacement (16) 1. Remove the air inlet fitting (17) using the gun tool (30) and remove the screw (20) using a 3/16 in. hex wrench. 2. Unscrew the fluid inlet fitting (25). Remove and clean or replace the inline fluid filter (24). 3. Unscrew fluid tube connector (16a) from fluid inlet. Carefully remove gasket (22). Fl ...

  • Graco 288513 - page 8

    Parts 8 311937G Parts ▲ Replacement Danger and Warning labels, tags, and cards are available at no cost. ◆ Included in Needle/Seat Repair Kit 255160 (purchase separately) † Included in RAC Guard Kit 288839 *Included in Seal Repair Kit 249422 (purchase separately) ‡ If you want to remove the filter, order 162863 to use as a seal in its place ...

  • Graco 288513 - page 9

    Technical Data 311937G 9 Technical Data *All readings were taken with fan valve fully closed, (full fan size) at 20 psi (140 kPa, 1.4 bar) and 100 psi (0.7 kPa, 7 bar) and at the assumed operator position. Sound Power tested to ISO 9614-2. Maximum Working Fluid Pressure..............................................................4000 psi (28 MPa, ...

  • Graco 288513 - page 10

    All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/patents 2ULJLQDOLQVWUXFWLRQV This manual contains English. MM 311937 Graco Headquarters: Minneapolis ...

Manufacturer Graco Category Paint Sprayer

Documents that we receive from a manufacturer of a Graco 288513 can be divided into several groups. They are, among others:
- Graco technical drawings
- 288513 manuals
- Graco product data sheets
- information booklets
- or energy labels Graco 288513
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco 288513.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco 288513, service manual, brief instructions and user manuals Graco 288513. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco 288513.

Similar manuals

A complete manual for the device Graco 288513, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco 288513 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco 288513.

A complete Graco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco 288513 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco 288513, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco 288513, that we can find in the current document
3. Tips how to use the basic functions of the device Graco 288513 - which should help us in our first steps of using Graco 288513
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco 288513
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco 288513 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco 288513?

Use the form below

If you did not solve your problem by using a manual Graco 288513, ask a question using the form below. If a user had a similar problem with Graco 288513 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)