English dropdown-ico

Manual NEC EA243WM-BK

27 pages Not applicable
Download

Go to site of 27

Summary
  • NEC EA243WM-BK - page 1

    MultiSync EA243WM MultiSync EA273WM User ’ s Manual ...

  • NEC EA243WM-BK - page 2

    Inde x W arning, Caution ..........................................................................................................................English-1 Registration Information ...............................................................................................................English-2 Recommended use ............................... ...

  • NEC EA243WM-BK - page 3

    English-1 English W ARNING CA UTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM W ALL SOCKET . T O FULL Y DISENGAGE THE POWER T O THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET .DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. ...

  • NEC EA243WM-BK - page 4

    English-2 Registration Inf ormation Canadian Depar tment of Comm unications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Inf ormati ...

  • NEC EA243WM-BK - page 5

    English-3 English Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONIT OR: • DO NO T OPEN THE MONIT OR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servici ...

  • NEC EA243WM-BK - page 6

    English-4 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for the display to warm up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Y our eyes should look slig ...

  • NEC EA243WM-BK - page 7

    English-5 English Contents Y our new NEC monitor box* should contain the following: • MultiSync monitor with tilt/swivel/pivot/height adjust stand • Power Cord* 1 • Video Signal Cable (DVI-D to DVI-D cable) • Video Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin) • USB Cable • Audio Cable (ø 3.5 stereo mini plug) • ControlSync C ...

  • NEC EA243WM-BK - page 8

    English-6 Quic k Star t T o connect the LCD monitor to your system, follow these instructions: NO TE: Make sure to read “Recommended Use” (page 3) before installation. 1. T urn off the power of your computer . 2. For a PC or MA C with D VI digital output: Connect the DVI signal cable to the connector of the display card in your system ( Figure ...

  • NEC EA243WM-BK - page 9

    English-7 English 5. T o keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the cables in the hooks fi rmly and evenly ( Figure C.2 and Figure C.3 ). NO TE: Cable cover is not removable. 6. Please check that you can still rotate, raise and lower the monitor screen after you have instal ...

  • NEC EA243WM-BK - page 10

    English-8 Raise and Lower Monitor Screen The monitor may be raised or lowered in either portrait or landscape mode. T o raise or lower screen, place a hand on each side of the monitor and lift or lower to the desired height ( Figure RL.1 ). NO TE: Handle with care when raising or lowering the monitor screen. Figure RL.1 Screen Rotation Before rotat ...

  • NEC EA243WM-BK - page 11

    English-9 English Flexib le Arm Installation This LCD monitor is designed for use with a fl exible arm. T o prepare the monitor for alternate mounting purposes: • Follow the instructions provided by the manufacturer of the display mount. • T o meet the safety requirements, the mounting stand must be able to support the weight of the monitor an ...

  • NEC EA243WM-BK - page 12

    English-10 Mount Flexib le Arm This LCD monitor is designed for use with a fl exible arm. 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Use the 4 screws removed from the stand to attach the arm to the monitor ( Figure F .1 ). Caution: Use ONL Y the screws (4 pcs) that were removed from the stand to avo ...

  • NEC EA243WM-BK - page 13

    English-11 English Contr ols OSD (On-Screen Displa y) control ke ys on the front of the monitor function are as f ollows: T o access OSD menu, touch any of the control keys. T o change signal input, touch the SELECT key . NO TE: Exit OSD in order to change signal input. 1 Ambibright Sensor Human Sensor Detects the level of ambient lighting, allowin ...

  • NEC EA243WM-BK - page 14

    English-12 A UT O BRIGHTNESS OFF: No function. 1 (AMBIENT LIGHT): Automatically adjusts the brightness to the optimal setting by detecting the brightness level of the environment* 1 . *1: Please refer to page 22 for full “Auto Brightness” information. 2 (WHITE CONTENT): Automatically adjusts the brightness to the optimal brightness setting base ...

  • NEC EA243WM-BK - page 15

    English-13 English SCREEN (Analog input only) A UT O ADJUST Automatically adjusts the image position, H. Size and Fine settings. A UT O CONTRAST Adjusts the image displayed for non-standard video inputs. LEFT / RIGHT Controls horizontal image position within the display area of the LCD. DO WN / UP Controls vertical image position within the display ...

  • NEC EA243WM-BK - page 16

    English-14 T ools V OLUME Controls the volume of the speakers or headphones. T o mute the speaker output, touch the “RESET/ECO MODE” key . SOUND INPUT (HDMI, DisplayP or t inputs onl y) This function selects Audio Input, HDMI or DisplayPort. VIDEO LEVEL (HDMI input only) NORMAL: Disables the expanded feature. EXP AND: Expands image contrast and ...

  • NEC EA243WM-BK - page 17

    English-15 English HO T KEY When this function is activated, ECO Mode, BRIGHTNESS and VOLUME can be adjusted without entering the OSD menu by using the front keys. ON: The “ECO” touch key on the bezel is enabled and can toggle among ECO settings. The Left/Right key adjusts the brightness level. The Up/Down key adjusts the volume level. OFF: The ...

  • NEC EA243WM-BK - page 18

    English-16 Inf ormation Provides information about the current resolution display and technical data including the preset timing being used and the horizontal and vertical frequencies. Indicates the model and serial numbers of your monitor . OSD W arning OSD warning menus disappear when EXIT is selected. NO SIGNAL: This function gives a warning whe ...

  • NEC EA243WM-BK - page 19

    English-17 English Specifi cations - EA243WM Monitor Specifi cations MultiSync EA243WM Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 61.13 cm/24.1 inches 61.13 cm/24.1 inches 1920 x 1200 Active matrix; thin fi lm transistor (TFT) liquid crystal display (LCD); 0.270 mm dot pitch; 250 cd/m 2 white luminance; 1000 ...

  • NEC EA243WM-BK - page 20

    English-18 Specifi cations - EA273WM Monitor Specifi cations MultiSync EA273WM Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 68.57 cm/27.0 inches 68.57 cm/27.0 inches 1920 x 1080 Active matrix; thin fi lm transistor (TFT) liquid crystal display (LCD); 0.31 1 mm dot pitch; 300 cd/m 2 white luminance; 1000:1 cont ...

  • NEC EA243WM-BK - page 21

    English-19 English Features DisplayP or t: DisplayPort is designed to be the future-ready and scalable solution for high performance digital display connectivity . It enables the highest resolutions, the fastest refresh rates and deepest color depths over standard cables. HDMI: HDMI is designed to be the future-ready , scalable solution for high pe ...

  • NEC EA243WM-BK - page 22

    English-20 T roub leshooting No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • The monitor does not support DisplayPort converter signal. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure ...

  • NEC EA243WM-BK - page 23

    English-21 English No Sound • Make sure the speaker cable is proper connected. • Check to see if mute is activated. • Check the volume in the OSD menu. • Check selected OSD’s T ools to “SOUND INPUT”, when DisplayPort or HDMI is in use. Brightness variations o ver time • Change Auto Brightness to OFF and adjust brightness. NO TE: Whe ...

  • NEC EA243WM-BK - page 24

    English-22 Using the A uto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly . The purpose of this function is to make the viewin ...

  • NEC EA243WM-BK - page 25

    English-23 English Contr olSync 1. Connect the master monitor with a sub monitor via a ControlSync cable (ø 2.5) into ControlSync IN/OUT . 2. Follow the steps of DA T A COPY . When the setting of the master monitor is adjusted, it will be copied and sent to the connected sub monitor(s) automatically . 3. Up to 5 sub monitors can be daisy-chained v ...

  • NEC EA243WM-BK - page 26

    English-24 TCO Displa ys 5 Congratulations! This display is designed f or both you and the planet! The display you have just purchased carries the TCO Certi Þ ed label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high pe ...

  • NEC EA243WM-BK - page 27

    English-25 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help defi ne and comply with the latest independen ...

Manufacturer NEC Category Monitor

Documents that we receive from a manufacturer of a NEC EA243WM-BK can be divided into several groups. They are, among others:
- NEC technical drawings
- EA243WM-BK manuals
- NEC product data sheets
- information booklets
- or energy labels NEC EA243WM-BK
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC EA243WM-BK.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC EA243WM-BK, service manual, brief instructions and user manuals NEC EA243WM-BK. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC EA243WM-BK.

Similar manuals

A complete manual for the device NEC EA243WM-BK, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC EA243WM-BK by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC EA243WM-BK.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC EA243WM-BK - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC EA243WM-BK, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC EA243WM-BK, that we can find in the current document
3. Tips how to use the basic functions of the device NEC EA243WM-BK - which should help us in our first steps of using NEC EA243WM-BK
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC EA243WM-BK
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC EA243WM-BK in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC EA243WM-BK?

Use the form below

If you did not solve your problem by using a manual NEC EA243WM-BK, ask a question using the form below. If a user had a similar problem with NEC EA243WM-BK it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)