English dropdown-ico

Manual Husqvarna 96193002300

32 pages 1.34 mb
Download

Go to site of 32

Summary
  • Husqvarna 96193002300 - page 1

    2008-01 O0802016 1330 SBE OV Manual Operator' s Manual Snow Thrower 96193002300 Operator's ...

  • Husqvarna 96193002300 - page 2

    2 IMPORT ANT Safe Operation Practices for W alk-Behind Snow Throwers This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury . W ARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be e ...

  • Husqvarna 96193002300 - page 3

    3 PRODUCT SPECIFICA TIONS Gasoline Capacity 4.0 Quarts and T ype: Unleaded Regular only Oil T ype SAE 30 (above 40°F) (API SG–SL): SAE 5W-30 or 10W-30 (0° to +40°F) SAE 0W-30 (below 0°F) Oil Capacity: 26 Ounces Spark Plug: Champion RJ19LM (Gap: .030") CONGRA TULA TIONS on your purchase of a new snow thrower . It has been designed, engine ...

  • Husqvarna 96193002300 - page 4

    4 P ARTS P ACKED SEP ARA TEL Y IN CART ON ...

  • Husqvarna 96193002300 - page 5

    5 ASSEMBL Y / PRE-OPERA TION Read these instructions and this manual in its entirety before you attempt to assemble or operate your new snow thrower . Reading the entire manual will familiarize you with the unit, which will assist you in assembly , operation and maintenance of the product. Y our new snow thrower has been as sem bled at the factory ...

  • Husqvarna 96193002300 - page 6

    6 ASSEMBL Y / PRE-OPERA TION AUGER CONTROL ROD CONTROL ARM RUBBER SLEEVE LOOP OPENING UP FIG. 5 INST ALL AUGER CONTROL ROD (See Figs. 5 and 6) The auger control rod has the short loop on the end of the spring as shown. 1. Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown. 2. With top end of rod positio ...

  • Husqvarna 96193002300 - page 7

    7 ASSEMBL Y / PRE-OPERA TION INST ALL DISCHARGE CHUTE / CHUTE ROT A TOR HEAD (See Fig. 7) NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotator head. 1. Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower. 2. Position chute rotator head over chute bracket. If n ...

  • Husqvarna 96193002300 - page 8

    8 OPERA TION KNOW YOUR SNOW THROWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERA TING YOUR SNOW THROWER. Compare the illustrations with your snow thrower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your snow thrower or in literat ...

  • Husqvarna 96193002300 - page 9

    9 MEETS A.N.S.I. SAFETY REQUIREMENTS Our snow throwers conform to the standards of the American National Standards Institute. FIG. 10 OPERA TION Drive speed control lever - used to select forward or reverse motion and speed of snow thrower . T raction drive control lever - used to engage power-pro- pelled for ward or reverse motion of snow thrower. ...

  • Husqvarna 96193002300 - page 10

    10 TO THROW SNOW (See Fig. 15) The auger rotation is controlled by the auger control lever located on the right side handle. • Squeeze auger control lever to handle to engage the auger and throw snow . • Release the auger control lever to stop throwing snow . OPERA TION TO CONTROL SNOW DISCHARGE (See Fig. 14) W ARNING: Snow throwers have ex- po ...

  • Husqvarna 96193002300 - page 11

    11 SPEED and DIRECTION are controlled by the drive speed control lever . • Move speed control lever to de sired po si tion AFTER engaging the trac tion drive control lever. CAUTION: Do not move speed con trol le ver unless engine is running. Damage to the snow thrower can result. • Slower speeds are for heavier snow and faster speeds are for li ...

  • Husqvarna 96193002300 - page 12

    12 NOTE: It is not recommended to operate the snow thrower over gravel or rocky surfaces. Objects such as gravel, rocks or other debris, can easily be picked up and thrown by the impeller , which can cause serious personal injury , property dam age or damage to the snow thrower. • If snow thrower must be operated over gravel surface, use extra ca ...

  • Husqvarna 96193002300 - page 13

    13 TO ST ART ENGINE • Be sure fuel shut-off valve is in the OPEN position. Y our snow thrower engine is equipped with both a 120 V olt A.C. electric starter and a recoil starter . The electric starter is equipped with a three-wire power cord and plug and is designed to operate on 120 V olt A.C. household current. • Be sure your house is a 120 V ...

  • Husqvarna 96193002300 - page 14

    14 MAINTENANCE LUBRICA TION CHART GENERAL REC OM MEN DA TIONS The warranty on this snow thrower does not cover items that have been sub ject ed to operator abuse or negligence. T o receive full value from the warranty , operator must maintain snow thrower as in struct ed in this manual. Some ad just - ments will need to be made periodically to prop ...

  • Husqvarna 96193002300 - page 15

    15 MAINTENANCE SNOW THROWER Always observe safety rules when performing main te nance. TIRES • Maintain proper air pressure in both tires (14–17 P .S.I. / 19-24.5 N-m). • Keep tires free of gasoline / oil, which can harm rubber . NOTE: T o seal tire punctures and prevent fl at tires due to slow leaks, tire sealant may be purchased from your ...

  • Husqvarna 96193002300 - page 16

    16 W ARNING: T o avoid serious injury , before per- forming any service or ad just ments: 1. Be sure throttle is in STOP position. 2. Remove safety ignition key . 3. Make sure the augers and all mov ing parts have completely stopped. 4. Disconnect spark plug wire from spark plug and place wire where it can not come in contact with plug. SNOW THROWE ...

  • Husqvarna 96193002300 - page 17

    17 1. REMOVE GASOLINE FROM FUEL T ANK - Drain gasoline from fuel tank into a suitable container , out- doors, away from fi re or fl ame. Wipe up any spilled gasoline. 2. REMOVE DISCHARGE CHUTE - Loosen locknut se cur ing chute rotator head to mounting bracket only enough to allow chute rotator head to be raised and dis charge chute to be removed ...

  • Husqvarna 96193002300 - page 18

    18 ST ORAGE Immediately prepare your snow thrower for storage at the end of the season or if the unit will not be used for 30 days or more. W ARNING: Never store the snow thrower with gaso line in the tank in side a build ing where fumes may reach an open fl ame, spark or pilot light as on a fur nace, water heater , clothes dryer or gas ap pli anc ...

  • Husqvarna 96193002300 - page 19

    19 TROUBLESHOOTING Does not start 1. Fuel shut-off valve (if so 1. T urn fuel shut-off valve to OPEN position. equipped) in OFF position. 2. Safety ignition key 2. Insert safety ignition key . is not inserted. 3. Out of fuel. 3. Fill fuel tank. 4. Throttle in STOP position. 4. Move throttle to F AST position. 5. Choke in OFF position. 5. Move to FU ...

  • Husqvarna 96193002300 - page 20

    20 REP AIR P AR TS AUGER HOUSING / IMPELLER ASSEMBL Y SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) 6 6 5 9 9 12 7 7 8 6 11 57 10 10 13 4 14 16 15 36 37 50 47 42 42 44 27 27 43 43 46 38 45 41 40 39 34 32 49 19 48 51 33 35 56 30 31 28 19 55 28 19 55 22 26 25 20 25 26 22 20 24 10 24 54 52 53 53 21 54 21 52 1 3 2 18 29 29 18 17 17 ...

  • Husqvarna 96193002300 - page 21

    21 KEY P ART NO. NO. DESCRIPTION 1 532 18 25-16 Bar , W eight 2 532 75 1 1-53 Nut, Hex 5/16-18 3 872 1 1 05-10 Bolt, Carriage 5/16-18 x 1-1/4 4 532 19 10-79 Pulley , Impeller 5 532 18 89-09 Bearing Assembly , Flange 6 532 15 53-77 Nut, Hex Flange 5/16-18 7 532 18 03-55 Bolt, Flat Head, Carriage 5/16-18 x 5/8 8 872 27 05-05 Bolt, Carriage 5/16-1 8 x ...

  • Husqvarna 96193002300 - page 22

    22 REP AIR P AR TS CONTROL P ANEL / DISCHARGE CHUTE SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) 3 2 1 2 6 19 2 2 26 28 27 27 25 20 29 7 4 5 6 8 8 16 18 17 10 14 3 13 15 9 11 12 22 23 22 23 31 30 37 ...

  • Husqvarna 96193002300 - page 23

    23 REP AIR P AR TS CONTROL P ANEL / DISCHARGE CHUTE SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPORT ANT : Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty . KEY P ...

  • Husqvarna 96193002300 - page 24

    24 REP AIR P AR TS HANDLES SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) 34 37 42 10 15 23 22 27 27 22 15 32 31 32 30 31 38 39 7 6 36 2 5 5 5 1 8 28 28 9 18 19 26 24 24 25 5 5 40 12 11 15 11 15 16 17 16 17 14 11 13 ...

  • Husqvarna 96193002300 - page 25

    25 REP AIR P AR TS HANDLES SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPORT ANT : Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty . KEY P ART NO. NO. DESCRIPTION 1 ...

  • Husqvarna 96193002300 - page 26

    26 11 8 3 4 1 1 1 1 5 5 2 2 7 9 9 9 10 6 14 12 17 19 19 13 3 6 12 13 15 15 16 18 18 16 23 REP AIR P AR TS DRIVE SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) ...

  • Husqvarna 96193002300 - page 27

    27 REP AIR P AR TS DRIVE SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPORT ANT : Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty . KEY P ART NO. NO. DESCRIPTION 1 8 ...

  • Husqvarna 96193002300 - page 28

    28 REP AIR P AR TS CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) 30 29 31 31 44 49 50 51 52 22 25 44 45 58 23 59 8 9 12 13 15 27 26 24 18 7 20 14 10 21 28 6 3 35 34 46 11 11 47 33 37 11 11 32 32 36 11 39 43 36 16 53 ...

  • Husqvarna 96193002300 - page 29

    29 REP AIR P AR TS CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPORT ANT : Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty . KEY P ART NO ...

  • Husqvarna 96193002300 - page 30

    30 REP AIR P AR TS WHEELS / DECALS SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) 3 2 5 6 4 1 2 4 5 12 3 4 5 6 1 9 10 14 14 ...

  • Husqvarna 96193002300 - page 31

    31 REP AIR P AR TS WHEELS / DECALS SNOW THROWER - MODEL NUMBER 1330SBE-OV (96193002300) NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm IMPORT ANT : Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty . KEY P ART NO. NO. DESCR ...

  • Husqvarna 96193002300 - page 32

    532 41 72-95 Rev . 1 01.09.08 BY Printed in U.S.A. SECTION 1: LIMITED W ARRANTY Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the date of purchase for the “Warranty Period” of the product as set forth below: Lifetime Warranty ...

Manufacturer Husqvarna Category Snow Blower

Documents that we receive from a manufacturer of a Husqvarna 96193002300 can be divided into several groups. They are, among others:
- Husqvarna technical drawings
- 96193002300 manuals
- Husqvarna product data sheets
- information booklets
- or energy labels Husqvarna 96193002300
All of them are important, but the most important information from the point of view of use of the device are in the user manual Husqvarna 96193002300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Husqvarna 96193002300, service manual, brief instructions and user manuals Husqvarna 96193002300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Husqvarna 96193002300.

Similar manuals

A complete manual for the device Husqvarna 96193002300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Husqvarna 96193002300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Husqvarna 96193002300.

A complete Husqvarna manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Husqvarna 96193002300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Husqvarna 96193002300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Husqvarna 96193002300, that we can find in the current document
3. Tips how to use the basic functions of the device Husqvarna 96193002300 - which should help us in our first steps of using Husqvarna 96193002300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Husqvarna 96193002300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Husqvarna 96193002300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Husqvarna 96193002300?

Use the form below

If you did not solve your problem by using a manual Husqvarna 96193002300, ask a question using the form below. If a user had a similar problem with Husqvarna 96193002300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)