English dropdown-ico

Manual Roland VG-88

84 pages 1.77 mb
Download

Go to site of 84

Summary
  • Roland VG-88 - page 1

    Thank you, and congratulations on your choice of the Roland VG-88 V- GUITAR SYSTEM. Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (Owner’s manual p. 2), “USING THE UNIT SAFELY” (Owner’s manual p. 3), and “IMPORTANT NOTES” (Owner’s manual p. 11). These sections provide important infor ...

  • Roland VG-88 - page 2

    This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For EU Countries Apparatus containing Lithium batteries ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til lever ...

  • Roland VG-88 - page 3

    3 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .......................................................................................................... 002a • Do not open or perform any internal modifica- tions on the unit. ............................................. ...

  • Roland VG-88 - page 4

    4 016 • Before using the unit in a foreign country, consult with your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page. .......................................................................................................... 101a • The unit should be located so that its ...

  • Roland VG-88 - page 5

    5 Contents USING THE UNIT SAFELY ...................................................................... 3 Concepts Behind Development of the V-Guitar System ..................... 8 Main features ........................................................................................... 9 How to use this manual ...................................... ...

  • Roland VG-88 - page 6

    6 Assigning a name to the patch ............................................................................................................... 34 Adjust the volume level of the patch ..................................................................................................... 35 Adjusting the sound of all patches collectively ............. ...

  • Roland VG-88 - page 7

    7 Chapter 6. Changing the system settings .......................................... 62 GK pickup settings ................................................................................................................................... 62 ■ Select the save destination of GK pickup settings....................................................... ...

  • Roland VG-88 - page 8

    8 Concepts Behind Development of the V-Guitar System ■ The Process That Led to the Birth of the V-Guitar System The acoustic piano has enjoyed a history of hundreds of years, culminating in the shape that it has today. The piano craftsmen of the past must have longed for piano wires that could be stretched just as tightly as they pleased. Unfortu ...

  • Roland VG-88 - page 9

    9 Main features ■ A new dimension of sound- creation made possible by three core sections: COSM Guitar, COSM Amp, and multi- effects The COSM GUITAR section allows you to change the guitar’s pickup and body. The COSM AMP section permits the accurate simulation of distortion, amp head, speakers, and mic placement. Finally, the versatile multi-ef ...

  • Roland VG-88 - page 10

    10 How to use this manual This manual is broadly divided into eight chapters that explain operations and functions you will use during normal playing, as well as how to make various settings. You’ll get the most from this manual by reading its chapters in order. An alphabetical index is provided at the end of the manual. Refer to it if you encoun ...

  • Roland VG-88 - page 11

    11 IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2 and 3, please read and observe the following: Power Supply 301 • Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting s ...

  • Roland VG-88 - page 12

    12 Front and Rear Panels Front Panel fig.0-01 1. LED Display 2. LCD Display 3. VALUE Dial 4. OUTPUT LEVEL Knob 5. OUTPUT SELECT Button 6. Function Buttons 7. PAGE Buttons 8. EXIT Button 9. WRITE Button 10. CURSOR Buttons 11. COSM GUITAR Button 12. COSM AMP Button 13. EFFECTS Button 14. LEVEL/BPM/KEY Button 15. PEDAL/ASSIGN Button 16. NAME/CHAIN But ...

  • Roland VG-88 - page 13

    13 Front and Rear Panels Rear Panel fig.0-02 23. GK IN Jack 24. GUITAR Jacks 25. OUTPUT Jacks 26. PHONES Jack 27. SUB EXP PEDAL/SUB CTL 1,2 (sub expression pedal/sub control pedal) Jack 28. MIDI Connectors 29. POWER Switch 30. AC Inlet 23 26 27 29 30 24 25 28 ...

  • Roland VG-88 - page 14

    14 Chapter 1. Preparations for playing Attaching the GK-2A/GK-3 to your guitar First, you will need to attach the GK-2A/GK-3 divided pickup to your guitar. To learn how, refer to the owner’s manual for the GK-2A/GK-3. The GK-2A/GK-3 cannot be used with the following types of guitar. (When attached to one of these guitars, the GK-2A/ GK-3 will not ...

  • Roland VG-88 - page 15

    15 Chapter 1. Preparations for playing Chapter 1 To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Use only the specified expression pedal (EV-5 or BOSS FV- 300L; sold separately). By connecting any other expression pedals, you risk ca ...

  • Roland VG-88 - page 16

    16 Chapter 1. Preparations for playing About the screen display (Basic operation) Depending on the screen, the parameters may occupy two or more screen pages. The page icon is shown in the upper right of the screen. fig.2-02 fig.1-02 1. Use PAGE [ ][ ] to switch pages. 2. Use [F1]–[F6] to select parameters. * You can also use [CURSOR] to select p ...

  • Roland VG-88 - page 17

    17 Chapter 1. Preparations for playing Chapter 1 Turning on the power and tuning your guitar ■ Turning on the power of the VG-88 Once the connections have been completed (p. 14,15), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and oth ...

  • Roland VG-88 - page 18

    18 Chapter 1. Preparations for playing 3. Play a single unfretted note on the string you wish to tune. The note name closest to the string you played will appear in the LED display. * Cleanly play a single note only on the string that you wish to tune. fig.1-06 4. Adjust the tuning until the note name of the string you played appears in the display ...

  • Roland VG-88 - page 19

    19 Chapter 1. Preparations for playing Chapter 1 fig.1-10a GK-2A: Make this setting if you are using a GK-2A/GK-3 divided pickup. GK-2: Make this setting if you are using a GK-2 divided pickup. PIEZO: Make this setting if you are using a piezo divided pickup. * Select the Piezo setting if you are using a piezo-type pickup. A piezo-type pickup uses ...

  • Roland VG-88 - page 20

    20 Chapter 1. Preparations for playing 9. If you will be using two or more guitars to play the VG- 88, repeat Steps 4–7 to enter the driver settings for each guitar. 10. When you have finished making all of your settings, press [EXIT]. You will return to Play page. * These settings are required when you newly install a divided pickup on your guit ...

  • Roland VG-88 - page 21

    21 Chapter 1. Preparations for playing Chapter 1 they will be saved even when the power is turned off. You do not need to redo these settings each time you play. * If you are using the VG-88 with a guitar other than the one you used previously, go to Step 3 and select the appropriate driver setting A–E for the guitar you are currently using. Then ...

  • Roland VG-88 - page 22

    22 Chapter 1. Preparations for playing ■ Playing the VG-88 Now let’s actually play the VG-88. 1. Make sure that you are in Play page. If you are not in Play page, press [EXIT] several times. 2. Set the select switch of the GK-2A/GK-3 to “MIX.” fig.1-19 3. Turn the VG-88’s [OUTPUT LEVEL]. fig.1-19a * The VG-88’s EXP pedal, or the GK-2A? ...

  • Roland VG-88 - page 23

    23 Chapter 1. Preparations for playing Chapter 1 ■ Using the VALUE dial to change patches Here’s how you can change from one patch to the next one. If the System parameter “DIAL” is set to “VALUE ONLY,” [VALUE] cannot be used to select patches. 1. Make sure that you are in Play page. If you are not in Play page, press [EXIT] several tim ...

  • Roland VG-88 - page 24

    24 Chapter 2. Overview of the VG-88 — basic knowledge How the VG-88 produces sound The most basic setup for playing sounds on the VG-88 consists of the VG-88 itself and a guitar on which the GK-2A/GK-3 has been installed. Here we will provide a simple explanation of how the VG-88 produces sound. fig.2-01 ■ COSM GUITAR This analyzes the principa ...

  • Roland VG-88 - page 25

    25 Chapter 3 Chapter 3. Creating sounds — basic section Saving a sound (patch) you created (the Write operation) The sound settings you modify are initially only temporary. When you select another patch, the modified settings will return to their original, unmodified values. If you wish to preserve your new settings, you must perform a Write oper ...

  • Roland VG-88 - page 26

    26 Chapter 3. Creating sounds — basic section 6. Press [F4] (PATCH B). fig.3-05 7. Turn [VALUE] to select the other patch that you wish to exchange. 8. Press [F6] (EXCHANGE) to exchange the patches. The display will indicate “NOW EXCHANGING.” 9. When you have finished exchange, press [EXIT] two times. You will return to Play page. Very simple ...

  • Roland VG-88 - page 27

    27 Chapter 4 Chapter 4. Creating sounds — advanced section COSM GUITAR settings Here’s how to make COSM Guitar settings. You can adjust any of these settings to achieve the desired sound. 1. Press [COSM GUITAR]. fig.4-01 fig.4-02 2. Press [F1] (ON/OFF) to switch COSM GUITAR on or off. * You can also turn [VALUE] to switch this on or off. 3. Pre ...

  • Roland VG-88 - page 28

    28 Chapter 4. Creating sounds — advanced section COSM AMP settings Here’s how to make COSM Amp settings. Adjust these settings until you get the sound you want. 1. Press [COSM AMP]. fig.4-03 fig.4-04 2. Press [F1] (ON/OFF) to switch COSM AMP on or off. * You can also switch this on or off by turning [VALUE]. 3. Press [F4] (TYPE), and use [VALUE ...

  • Roland VG-88 - page 29

    29 Chapter 4. Creating sounds — advanced section Chapter 4 Setting the tempo and key of the song you will perform You can specify the tempo and key of the song that you will be performing. 1. Press [LEVEL/BPM/KEY]. fig.4-07 fig.4-08 * For details on setting the level, refer to “Adjust the volume level of the patch” (p. 35). 2. Press [F2] (BPM ...

  • Roland VG-88 - page 30

    30 Chapter 4. Creating sounds — advanced section ■ Setting the function of the VG- 88’s built-in CTL pedal 1. Press [PEDAL/ASSIGN]. fig.4-12 fig.4-10 2. Press [F1] (ON/OFF) to switch the CTL pedal function on or off. * You can also switch this by turning [VALUE]. fig.4-13 3. Press [F5] (EDIT). fig.4-14a 4. Press [F1] (TARGET), and turn [VALUE ...

  • Roland VG-88 - page 31

    31 Chapter 4. Creating sounds — advanced section Chapter 4 ■ Setting the GK SW function 1. Press [PEDAL/ASSIGN]. fig.4-18 fig.4-10 2. Press [PAGE ] to move to Page 2. fig.4-19a 3. Press [F1] (ON/OFF) to switch the GK SW function on or off. * You can also switch this by turning [VALUE]. 4. Press [F4] (EDIT). fig.4-20 5. Press [F1] (TARGET), and ...

  • Roland VG-88 - page 32

    32 Chapter 4. Creating sounds — advanced section 7. Press [F5] (MAX), and turn [VALUE] to specify the maximum value. 8. Press [F3] (SOURCE), and turn [VALUE] to select the desired source. 9. Press [F6] (MODE), and turn [VALUE] to select the mode. 10. Press [PAGE ] to move to Page 2. fig.4-23a 11. Press [F1], and turn [VALUE] to specify the ACTIVE ...

  • Roland VG-88 - page 33

    33 Chapter 4. Creating sounds — advanced section Chapter 4 Combining the normal input and GK input to create a sound The COSM GUITAR lets you create sounds by combining the GK pickup with the normal pickup. ■ Setting the balance between the GK pickup and the normal pickup 1. Press [COSM GUITAR]. fig.4-26 fig.4-27 2. Press [PAGE ] twice to move ...

  • Roland VG-88 - page 34

    34 Chapter 4. Creating sounds — advanced section Assigning a name to the patch You can assign a name to a patch you create. 1. Press [NAME/CHAIN]. fig.4-31 fig.4-32 2. Press [F4] (NAME). fig.4-33 3. Use [CURSOR] to move the cursor to the location at which you want to select a character. 4. Turn [VALUE] to select the desired character. As you cont ...

  • Roland VG-88 - page 35

    35 Chapter 4. Creating sounds — advanced section Chapter 4 Adjust the volume level of the patch If the currently selected patch is louder or softer than other patches, you can adjust its level. 1. Press [LEVEL/BPM/KEY]. fig.4-34 fig.4-35 2. Press [F1] (LEVEL), and turn [VALUE] to select the desired value. fig.4-36 3. When you are finished making ...

  • Roland VG-88 - page 36

    36 Chapter 5. Parameter Guide COSM GUITAR By making settings for the various elements that make up the tone of a guitar, you can create a wide variety of sounds. In addition to setting actual guitar parameters, such as pickup, body, and the pitch of each string, you can also emphasize the overtone structure, or create sounds using polyphonic effect ...

  • Roland VG-88 - page 37

    37 COSM GUITAR Chapter 5. Parameter Guide Chapter 5 FILTER-BASS This Instrument is like a bass whose sound is passed through a filter. (PAGE2) FILTER (p. 43) COLOR (p. 43) (PAGE3) EQ (p. 45) PAN (p. 45) MIXER (p. 45) PIPE This Instrument produces sounds like a soft woodwind lead instrument. (PAGE2) FILTER (p. 43) P-BEND (p. 43) SUSTAIN (p. 43) (PAG ...

  • Roland VG-88 - page 38

    38 Chapter 5. Parameter Guide COSM GUITAR VARI (variable): This allows you to use up to two pickups of your choice, selecting from double-coil, single-coil, piezo, and acoustic. If you use double-coil or single-coil type pickups, you may freely adjust the location of the pickups. PICKUP This is the switch that selects between the two pickups. REAR: ...

  • Roland VG-88 - page 39

    39 COSM GUITAR Chapter 5. Parameter Guide Chapter 5 Specifies the pitch shifted sound. ON/OFF Switches the pitch shift on/off. * Turning [VALUE] will select PRESET. MODE Selection for the pitch shift mode. SHIFT (pitch shift): The pitch shift amount can be set independently for each string. HARMO (harmony): This creates harmony that matches the key ...

  • Roland VG-88 - page 40

    40 Chapter 5. Parameter Guide COSM GUITAR METAL: A metal body with a single round cone resonator. This is suitable for bottle-neck (slide) playing, etc. BANJO: The sound of a body covered in stretched skin. Changing the size will produce an effect as if the tuning were changed. SIZE [-50–+50] Specifies the size of the body. This modifies the reso ...

  • Roland VG-88 - page 41

    41 COSM GUITAR Chapter 5. Parameter Guide Chapter 5 A slightly pitch-shifted sound is added to the original sound of each string, producing a spacious feeling. ON/OFF Switches the detune on/off. DETUNE [0–100] A slightly pitch-shifted sound is added to the original sound of each string. Specifies the shift amount of the pitch-shifted sound. ON/OF ...

  • Roland VG-88 - page 42

    42 Chapter 5. Parameter Guide COSM GUITAR The compressor is an effect that attenuates loud input levels and boosts soft input levels, thus evening out the volume to create sustain without distortion. ON/OFF Turns the compressor on/off. * Turning [VALUE] will select PRESET. MODE COMP: The effect will function as a compressor. LIMITER: The effect wil ...

  • Roland VG-88 - page 43

    43 COSM GUITAR Chapter 5. Parameter Guide Chapter 5 The sound can be passed through a filter to adjust the brightness or character. * Cannot be turned on/off. PRESET Select one of the pre-programmed types of filter. CUTOFF (cutoff frequency) [0–100] This sets the brightness (hardness) of the sound. A larger value results in a brighter sound. RESO ...

  • Roland VG-88 - page 44

    44 Chapter 5. Parameter Guide COSM GUITAR This changes the pulse width of the PWM waveform. * Cannot be turned on/off. PRESET Select one of the pre-programmed types of modulation. DEPTH (PWM depth) [0–100] This sets the depth to which the waveform’s pulse width is varied. Higher values result in deeper undulations. RATE (PWM rate) [0–100] Thi ...

  • Roland VG-88 - page 45

    45 COSM GUITAR Chapter 5. Parameter Guide Chapter 5 A four-band equalizer with high and low ranges is provided. The sound processed by the effect can be boosted by frequency range before it is output. ON/OFF Switches the equalizer on/off. * Turning [VALUE] will select PRESET. LEVEL [-20–+20 dB] Adjusts the volume after the equalizer. LOW G (low g ...

  • Roland VG-88 - page 46

    46 Chapter 5. Parameter Guide COSM AMP COSM AMP This simulates the head and speaker sections of a guitar amp. ON/OFF Switches the COSM amp on/off. TYPE This sets the type of the COSM amp. The distortion and tone characteristics of each amp are as shown below: JC-120: The sound of the Roland “JC-120” (Jazz Chorus 120), a favorite of pro musician ...

  • Roland VG-88 - page 47

    47 EFFECTS Chapter 5. Parameter Guide Chapter 5 EFFECTS The compressor is an effect that attenuates loud input levels and boosts soft input levels, thus evening out the volume to create sustain without distortion. The limiter attenuates loud input levels to prevent distortion. ON/OFF Switches the COMP/LM on/off. * Turning [VALUE] will select PRESET ...

  • Roland VG-88 - page 48

    48 Chapter 5. Parameter Guide EFFECTS SENS (sensitivity) [0–100] This adjusts the sensitivity at which the filter will change in the direction determined by the polarity setting. Higher values will result in a stronger response. With a setting of “0,” the strength of picking will have no effect. FREQ (frequency) [0–100] This adjusts the cen ...

  • Roland VG-88 - page 49

    49 EFFECTS Chapter 5. Parameter Guide Chapter 5 This effect creates a sense of spaciousness and adds depth to the sound. It allows you to produce the impression that multiple instruments are playing, or to add a distinctive type of modulation. You can use this effect to simulate a number of instruments playing together, or to create unique undulati ...

  • Roland VG-88 - page 50

    50 Chapter 5. Parameter Guide EFFECTS ● When “P.SHIFTER” is selected as the type ON/OFF [OFF, ON] Turns the two each pitch shifter sounds on/off. MODE Selection for the pitch shifter mode. POLY: You can play chords. MONO: Compared with conventional pitch shifters, modulation is minimized. You should play notes individually. SHIFT [-24–+24] ...

  • Roland VG-88 - page 51

    51 EFFECTS Chapter 5. Parameter Guide Chapter 5 ● When “PHASER” is selected as the type RATE [0–100, BPM  –BPM  ] This sets the rate of the phaser effect. * When set to BPM, the value of each parameter will be set according to the value of the BPM (p. 55) specified for each patch. This makes it easier to achieve effect sound setting ...

  • Roland VG-88 - page 52

    52 Chapter 5. Parameter Guide EFFECTS ● When “2x2 CHORUS” is selected as the type X OVER F (crossover frequency) [100 Hz–4.00 kHz] This parameter sets the frequency at which the frequency components of the direct sound are divided into bass and treble bands. RATE [0–100, BPM  –BPM  ] Adjusts the speed of the chorus effect. * When ...

  • Roland VG-88 - page 53

    53 EFFECTS Chapter 5. Parameter Guide Chapter 5 This effect adds delayed sound to the direct sound, giving more body to the sound or creating special effects. ON/OFF Switches the DELAY on/off. * Turning [VALUE] will select PRESET. DLY TIME (delay time) [0–1800 msec, BPM  –BPM  ] This determines the delay time. * When set to BPM, the value ...

  • Roland VG-88 - page 54

    54 Chapter 5. Parameter Guide EFFECTS This simulates the sound that reaches the listener after being reflected from many surfaces (late reverberation). ON/OFF Switches the REVERB on/off. * Turning [VALUE] will select PRESET. MODE This selects the reverb mode. ROOM 1: Simulates the reverberation of a small room. Provides the bright reverberation of ...

  • Roland VG-88 - page 55

    55 Chapter 5. Parameter Guide Chapter 5 LEVEL/BPM/KEY LEVEL [0–200] This adjusts the output volume of the VG-88. BPM [40BPM–250BPM, MIDI] Adjusts the BPM value for each patch. * BPM (beats per minute) indicates the number of quarter note beats that occur each minute. KEY [C (Am)–B (G # m)] Specify the KEY of the COSM guitar and the Harmonist ...

  • Roland VG-88 - page 56

    56 Chapter 5. Parameter Guide SOURCE Specify the MIDI data or device that will be the source of the change. * When using GK VOL, GK S1/S2, SUB CTL1, or SUB CTL2 as the source, GK FUNC SYNTH VOL, DOWN/S1 and UP/ S2, and PEDAL SUB CTL1 and SUB CTL2 for SYSTEM, must be set, respectively, to “ASSIGNABLE” (p. 65-67). MODE Specify how the value will ...

  • Roland VG-88 - page 57

    57 Chapter 5. Parameter Guide Chapter 5 GK FUNC (GK function) Here you can specify the function of the GK pickup. DOWN/S1 UP/S2 Specifies the function assigned to the S1 or S2 switches of the GK pickup. ASSIGNABLE: Settings can be made in each patch as parameter control buttons. MASTER LEVEL: Increment or decrement the master level. PEDAL FUNC: Whi ...

  • Roland VG-88 - page 58

    58 Chapter 5. Parameter Guide GLOBAL These settings allow you to make temporary adjustments that affect all Patches. This is a convenient way to make quick adjustments to suit changes in your equipment or in your performance environment. ON/OFF Switches the Global function on/off. LOW G (low gain) [-20– +20 dB] Adjusts the low frequency range ton ...

  • Roland VG-88 - page 59

    59 Chapter 5. Parameter Guide Chapter 5 SYSTEM This is where settings for the VG-88’s operating environment are made. This is where settings for the divided pickup are made. SETTING [A, B, C, D, E] Up to five Driver Settings can be stored in memory. If you use more than one guitar, this provides a handy way to store the settings for each one in m ...

  • Roland VG-88 - page 60

    60 Chapter 5. Parameter Guide Specifies the operations of the VG-88’s built-in pedal and an external pedal. BANK SW MODE (bank switch mode) Determines how the patch will change when you press the BANK pedals. WAIT NUM: After changing the bank, press a number pedal [1]–[4] to switch the patch. NUMBER 1: When you change the bank, patch number 1 o ...

  • Roland VG-88 - page 61

    61 Chapter 5. Parameter Guide Chapter 5 These are the settings for MIDI-related functions. CHANNEL [1–16] Selects the MIDI channel used for receiving MIDI messages. OMNI MODE [OMNI OFF, OMNI ON] If omni mode is turned on, MIDI data will be received on all channels, regardless of the MIDI channel setting. DEVICE ID [1–32] Determines the device I ...

  • Roland VG-88 - page 62

    62 Chapter 6. Changing the system settings GK pickup settings ■ Select the save destination of GK pickup settings 1. Make sure you’re in Play page. If you’re not in Play page, press [EXIT] several times. 2. Press [F6] (SYSTEM). 3. Press [F1] (DRIVER). 4. Press [F1] (SETTING). fig.1-10 5. Rotate [VALUE] to select the save destination (A–E). ...

  • Roland VG-88 - page 63

    63 Chapter 6. Changing the system settings Chapter 6 [F4] (SPACE): A space will be inserted at the cursor location, and the cursor will move one space to the right. [F5] (DELETE): Delete a character and move the subsequent text forward. [F6] (A, a, 1, ■ ): Switch between inputting “uppercase characters,” “lowercase characters,” “numeral ...

  • Roland VG-88 - page 64

    64 Chapter 6. Changing the system settings ■ Exchanging the location of S1/ S2 On guitars that have a built-in divided pickup, the S1/S2 switches may be located in the opposite locations from the GK pickup. You can make this setting if you want the operation to be the same. 1. Make sure you’re in Play page. If you’re not in Play page, press [ ...

  • Roland VG-88 - page 65

    65 Chapter 6. Changing the system settings Chapter 6 ■ Setting the function of an external foot switch (FS-5U) Here’s how you can specify the function of an external foot switch connected to the SUB CTL 1,2 jack. 1. Make sure you’re in Play page. If you’re not in Play page, press [EXIT] several times. 2. Press [F6] (SYSTEM). 3. Press [F2] ( ...

  • Roland VG-88 - page 66

    66 Chapter 6. Changing the system settings VALUE dial settings ■ Preventing accidental operation of the VALUE dial 1. Make sure you’re in Play page. If you’re not in Play page, press [EXIT] several times. 2. Press [F6] (SYSTEM). 3. Press [F3] (DIAL). fig.6-24 4. Rotate [VALUE] to select the function of the dial. P.NUMBER&VALUE: In the Pla ...

  • Roland VG-88 - page 67

    67 Chapter 6. Changing the system settings Chapter 6 ■ Selecting the function of the SYNTH VOL knob 1. Make sure you’re in Play page. If you’re not in Play page, press [EXIT] several times. 2. Press [F4] (GK FUNC). 3. Press [F6] (SYNTH VOL). fig.6-32 4. Rotate [VALUE] to select the function of the SYNTH VOL (GK Volume) knob. ASSIGNABLE: The f ...

  • Roland VG-88 - page 68

    68 Chapter 7. Using MIDI About MIDI * The “Bank Select” described in this chapter is different than the “Banks” explained in Chapter 1. Bank Select is a type of MIDI message that is normally used for switching Patches. A Bank Select message has a value of 0 to 127, and is used in combination with a Program Change message. MIDI is a standard ...

  • Roland VG-88 - page 69

    69 Chapter 7. Using MIDI Chapter 7 1. Make sure you’re in Play page. If you’re not in Play page, press [EXIT] several times. 2. Press [F6] (SYSTEM). 3. Press [F5] (MIDI). 4. Press [F1] (CHANNEL). fig.7-02 5. Rotate [VALUE] to select the MIDI channel (1 – 16). 6. Press [EXIT] several times to return to the Play page. * This setting is preserve ...

  • Roland VG-88 - page 70

    70 Chapter 7. Using MIDI Switching the patches of an external device You can select whether or not Program Changes will be transmitted when you change patches. * The Program Changes transmitted for patches are fixed. You may want to alter Program Change reception map settings on the external device when necessary. 1. Make sure you’re in Play page ...

  • Roland VG-88 - page 71

    71 Chapter 7. Using MIDI Chapter 7 ■ Setting the Program Change reception map 1. Make sure you’re in Play page. If you’re not in Play page, press [EXIT] several times. 2. Press [F6] (SYSTEM). 3. Press [F5] (MIDI). 4. Press [PAGE ] to access page 3. fig.7-08a 5. Press [CURSOR] to move the cursor to the BANK PROG value, then turn [VALUE] to mov ...

  • Roland VG-88 - page 72

    72 Chapter 7. Using MIDI Transmitting/receiving all sound data The VG-88’s system parameter and patch parameter settings can be transferred as a whole to or from an external device as MIDI exclusive data. If you use a MIDI sequencer that is able to record exclusive data, you can transmit system parameters and patch parameters to t he MIDI sequenc ...

  • Roland VG-88 - page 73

    73 Chapter 8 Chapter 8. Appendices Troubleshooting This section explains some things that might go wrong when using the VG-88, and what needs to be done to correct the problem. If you think there may be something wrong with your VG-88, please check through the following first. If these suggestions don’t fix the problem, then go ahead and contact ...

  • Roland VG-88 - page 74

    74 Chapter 8. Appendices Can’t transmit/receive data via bulk dump ❍ Are you performing the operation in the bulk dump transmit/receive screens? Move to the bulk dump transmit/receive screens. ❍ Is the MIDI sequencer you are using able to record exclusive data? Use a MIDI sequencer that is able to record exclusive data. We recommend that you ...

  • Roland VG-88 - page 75

    75 Chapter 8. Appendices Chapter 8 MIDI Implementation Chart fig.8-01 Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Prog Change System Exclusive System Common System Real Time Aux Message Notes Transmitted Recognized Remarks Default Changed Default Messages Altered True Voice Note ON Note OFF Key's ...

  • Roland VG-88 - page 76

    76 Chapter 8. Appendices Specifications VG-88: V-Guitar System AD Conversion A/D 24 bit AF Method (NORMAL INPUT) 20 bit (GK INPUT) D/A Conversion 20 bit 128 times Oversampling ∆∑ Modulation Sampling Frequency 44.1 kHz Program Memories 260 (Preset: 160 + User: 100) Nominal Input Level INPUT: -10 dBu Input Impedance INPUT: 1 M Ω Nominal Output ...

  • Roland VG-88 - page 77

    77 Index Numerics 12STRINGS ..................................................................... 36 2x2 CHORUS ................................................................. 52 A ACOUSTIC ..................................................................... 36 ACTIVE RANGE ..................................................... 32, 56 ATTACK .... ...

  • Roland VG-88 - page 78

    78 Index PWM ............................................................................... 37 PWM MOD .................................................................... 44 R rearranging ..................................................................... 25 REVERB .......................................................................... 54 S ...

  • Roland VG-88 - page 79

    79 VG-88 PATCH LIST No. Name USER 1-1 V-GUITAR USER 1-2 AcGt12st USER 1-3 TEXS ST USER 1-4 OCT DRV USER 2-1 SMOKE ST USER 2-2 NYLON USER 2-3 STD JAZZ USER 2-4 ECHO PAD USER 3-1 OD STACK USER 3-2 12st+EGt USER 3-3 MILD ST USER 3-4 ORGAN USER 4-1 BG DRV USER 4-2 AcGt+BS USER 4-3 WAH STRT USER 4-4 HORN Gt USER 5-1 DeepEcho USER 5-2 LA NYLON USER 5-3 - ...

  • Roland VG-88 - page 80

    80 No. Name PRESET 26-1 V-GUITAR PRESET 26-2 AcGt12st PRESET 26-3 TEXS ST PRESET 26-4 OCT DRV PRESET 27-1 SMOKE ST PRESET 27-2 NYLON PRESET 27-3 STD JAZZ PRESET 27-4 ECHO PAD PRESET 28-1 OD STACK PRESET 28-2 12st+EGt PRESET 28-3 MILD ST PRESET 28-4 ORGAN PRESET 29-1 BG DRV PRESET 29-2 AcGt+BS PRESET 29-3 WAH STRT PRESET 29-4 HORN Gt PRESET 30-1 -1O ...

  • Roland VG-88 - page 81

    81 PEDAL/ASSIGN Parameter List COSM GUITAR COSM GT (COSM GUITAR) ON/OFF F-BASS COLOR BODY ATTACK BODY LOW CUT LEVEL COSM EQ (EQ) ON/OFF LEVEL L-MID G LOW G HIGH G H-MID G PICKUP PICKUP TONE LEVEL PT SHIFT (PITCH SHIFT) ON/OFF SHIFT1–6 FINE1–6 E.LEVEL1–6 D.LEVEL1–6 HARMO1–6 TUNE ON/OFF TUNE TYPE SHIFT1–6 ON/OFF DETUNE DETUNE PAN STRING-1 ...

  • Roland VG-88 - page 82

    82 1:F.BACK 1:PAN 1:LEVEL DIR LEVEL 2:ON/OFF 2:SHIFT 2:FINE 2:PAN 2:LEVEL FX:FL (FLANGER) RATE DEPTH MANUAL RESONANCE LEVEL FX:PH (PHASER) RATE DEPTH MANUAL RESONANCE LEVEL STEP FX:SUB EQ (SUB EQ) LEVEL L-MID G LOW G HIGH G H-MID G FX:2x2CE (2x2CHORUS) L-RATE L-DEPTH L-LEVEL H-RATE H-DEPTH H-LEVEL FX:TRT (REMOLO) RATE DEPTH FX:PAN (PAN) RATE DEPTH ...

  • Roland VG-88 - page 83

    This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC. For EU Countries For EU Countries Apparatus containing Lithium batteries ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til lever ...

  • Roland VG-88 - page 84

    Thank you, and congratulations on your choice of the Roland VG-88 V- GUITAR SYSTEM. Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (Owner’s manual p. 2), “USING THE UNIT SAFELY” (Owner’s manual p. 3), and “IMPORTANT NOTES” (Owner’s manual p. 11). These sections provide important infor ...

Manufacturer Roland Category Musical Instrument

Documents that we receive from a manufacturer of a Roland VG-88 can be divided into several groups. They are, among others:
- Roland technical drawings
- VG-88 manuals
- Roland product data sheets
- information booklets
- or energy labels Roland VG-88
All of them are important, but the most important information from the point of view of use of the device are in the user manual Roland VG-88.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Roland VG-88, service manual, brief instructions and user manuals Roland VG-88. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Roland VG-88.

Similar manuals

A complete manual for the device Roland VG-88, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Roland VG-88 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Roland VG-88.

A complete Roland manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Roland VG-88 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Roland VG-88, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Roland VG-88, that we can find in the current document
3. Tips how to use the basic functions of the device Roland VG-88 - which should help us in our first steps of using Roland VG-88
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Roland VG-88
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Roland VG-88 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Roland VG-88?

Use the form below

If you did not solve your problem by using a manual Roland VG-88, ask a question using the form below. If a user had a similar problem with Roland VG-88 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)