English dropdown-ico

Manual Technicolor - Thomson TG576 v7

740 pages 2.22 mb
Download

Go to site of 740

Summary
  • Technicolor - Thomson TG576 v7 - page 1

    Thomson TG576 v7 and TG585 v7 Residential DSL Gateway CLI Reference Guide R7.4 ...

  • Technicolor - Thomson TG576 v7 - page 2

    ...

  • Technicolor - Thomson TG576 v7 - page 3

    Thomson TG576 v7 and TG585 v7 CLI Reference Guide R7.4 ...

  • Technicolor - Thomson TG576 v7 - page 4

    Copyright Copyright ©1999-2007 THOMSON. All rights reserved. Distribution and copying of this document, use and communication of its contents is not permitted without written authorization from THOMSON. The content of this document is furnished for informational use only , may be subject to change without notice, and should not be construed as a c ...

  • Technicolor - Thomson TG576 v7 - page 5

    Contents E-DOC-CTC-20071119-0014 v1.0 5 Contents: ? Command.................................................................................................. 25 .. Command.................................................................................................. 27 atm Commands................................................................. ...

  • Technicolor - Thomson TG576 v7 - page 6

    Contents 6 E-DOC-CTC-20071119-0014 v1.0 atm qosbook config............................................................................................................................ 60 atm qosbook ctdadd........................................................................................................................... 61 atm qosbook ctddele ...

  • Technicolor - Thomson TG576 v7 - page 7

    Contents E-DOC-CTC-20071119-0014 v1.0 7 connection unbind.............................................................................................................................. 97 cwmp Commands........................................................................................ 99 cwmp config............................................... ...

  • Technicolor - Thomson TG576 v7 - page 8

    Contents 8 E-DOC-CTC-20071119-0014 v1.0 dhcp relay list.................................................................................................................................... 138 dhcp relay modify............................................................................................................................. 139 dhcp relay ...

  • Technicolor - Thomson TG576 v7 - page 9

    Contents E-DOC-CTC-20071119-0014 v1.0 9 dhcp server pool ruleadd................................................................................................................. 176 dhcp server pool ruledelete............................................................................................................. 177 dhcp spoofing add.......... ...

  • Technicolor - Thomson TG576 v7 - page 10

    Contents 10 E-DOC-CTC-20071119-0014 v1.0 dsd Commands.......................................................................................... 213 dsd config.......................................................................................................................................... 214 dsd debug config................................. ...

  • Technicolor - Thomson TG576 v7 - page 11

    Contents E-DOC-CTC-20071119-0014 v1.0 11 eth Commands........................................................................................... 247 eth bridge add................................................................................................................................... 251 eth bridge clear................................... ...

  • Technicolor - Thomson TG576 v7 - page 12

    Contents 12 E-DOC-CTC-20071119-0014 v1.0 eth bridge vlan ifadd........................................................................................................................ 288 eth bridge vlan ifconfig.................................................................................................................... 289 eth bridge vlan if ...

  • Technicolor - Thomson TG576 v7 - page 13

    Contents E-DOC-CTC-20071119-0014 v1.0 13 eth vlan add....................................................................................................................................... 325 eth vlan delete................................................................................................................................... 326 eth vl ...

  • Technicolor - Thomson TG576 v7 - page 14

    Contents 14 E-DOC-CTC-20071119-0014 v1.0 grp config........................................................................................................................................... 366 grp flush............................................................................................................................................. 367 ...

  • Technicolor - Thomson TG576 v7 - page 15

    Contents E-DOC-CTC-20071119-0014 v1.0 15 igmp host ifconfig............................................................................................................................. 402 igmp host iflist.................................................................................................................................. 403 igmp host ...

  • Technicolor - Thomson TG576 v7 - page 16

    Contents 16 E-DOC-CTC-20071119-0014 v1.0 ip iflist................................................................................................................................................. 440 ip ifwait............................................................................................................................................. ...

  • Technicolor - Thomson TG576 v7 - page 17

    Contents E-DOC-CTC-20071119-0014 v1.0 17 label rule flush................................................................................................................................... 475 label rule list...................................................................................................................................... 476 lab ...

  • Technicolor - Thomson TG576 v7 - page 18

    Contents 18 E-DOC-CTC-20071119-0014 v1.0 menu Command........................................................................................ 513 mlp Commands.......................................................................................... 515 mlp debug export................................................................................. ...

  • Technicolor - Thomson TG576 v7 - page 19

    Contents E-DOC-CTC-20071119-0014 v1.0 19 ppp flush............................................................................................................................................ 550 ppp ifadd............................................................................................................................................ 551 p ...

  • Technicolor - Thomson TG576 v7 - page 20

    Contents 20 E-DOC-CTC-20071119-0014 v1.0 script run............................................................................................................................................ 588 service Commands.................................................................................... 589 service host add................................. ...

  • Technicolor - Thomson TG576 v7 - page 21

    Contents E-DOC-CTC-20071119-0014 v1.0 21 sntp Commands......................................................................................... 627 sntp add............................................................................................................................................. 628 sntp config..................................... ...

  • Technicolor - Thomson TG576 v7 - page 22

    Contents 22 E-DOC-CTC-20071119-0014 v1.0 tls https-server cert delete ............................................................................................................... 663 tls https-server cert list..................................................................................................................... 664 tls https-server ...

  • Technicolor - Thomson TG576 v7 - page 23

    Contents E-DOC-CTC-20071119-0014 v1.0 23 wireless macacl flush........................................................................................................................699 wireless macacl list........................................................................................................................... 700 wireless macacl ...

  • Technicolor - Thomson TG576 v7 - page 24

    Contents 24 E-DOC-CTC-20071119-0014 v1.0 xdsl debug traceconfig..................................................................................................................... 736 xdsl info.............................................................................................................................................. 737 xdsl vers ...

  • Technicolor - Thomson TG576 v7 - page 25

    ? Command E-DOC-CTC-20071119-0014 v1.0 25 ? Command Displays this help information ...

  • Technicolor - Thomson TG576 v7 - page 26

    .. Command 26 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 27

    .. Command E-DOC-CTC-20071119-0014 v1.0 27 .. Command Exits group selection. ...

  • Technicolor - Thomson TG576 v7 - page 28

    atm Commands 28 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 29

    atm Commands E-DOC-CTC-20071119-0014 v1.0 29 atm Commands atm cac config Configure A TM connection admission control. see page 31 atm cac list List all CAC parameters. see page 32 atm cac overbooking Configure A TM overbooking parameters. see page 33 atm debug aal5stats Display AAL5 port specific atm statistics. see page 34 atm debug gstats Display ...

  • Technicolor - Thomson TG576 v7 - page 30

    atm Commands 30 E-DOC-CTC-20071119-0014 v1.0 atm phonebook delete Delete a phonebook entry . see page 56 atm phonebook flush Flush all phonebook entries. see page 57 atm phonebook list Display the phonebook. see page 58 atm qosbook add Add a new qosbook entry . see page 59 atm qosbook config Modify the qosbook configuration. see page 60 atm qosbook ...

  • Technicolor - Thomson TG576 v7 - page 31

    atm Commands E-DOC-CTC-20071119-0014 v1.0 31 atm cac config Configure A TM connection admission control. SYNT AX: atm cac config port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> state = <{disabled|enabled}> where: port The port for which CAC is configured. REQUIRED state Enable/disable CAC for an A TM port. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 32

    atm Commands 32 E-DOC-CTC-20071119-0014 v1.0 atm cac list List all CAC parameters. ...

  • Technicolor - Thomson TG576 v7 - page 33

    atm Commands E-DOC-CTC-20071119-0014 v1.0 33 atm cac overbooking Configure A TM overbooking parameters. SYNT AX: atm cac overbooking [rt = <number{0-1000}]> [nrt = <number{0-1000}]> where: rt The realtime overbooking percentage. OPTIONAL nrt The non-realtime overbooking percentage. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 34

    atm Commands 34 E-DOC-CTC-20071119-0014 v1.0 atm debug aal5stats Display AAL5 port specific atm statistics. SYNT AX: atm debug aal5stats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> [clear = <{disabled|enabled}]> where: port The port number for which statistics will be retri ...

  • Technicolor - Thomson TG576 v7 - page 35

    atm Commands E-DOC-CTC-20071119-0014 v1.0 35 atm debug gstats Display A TM global statistics. SYNT AX: atm debug gstats [clear = <{disabled|enabled}]> where: clear Clear the statistics after request. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 36

    atm Commands 36 E-DOC-CTC-20071119-0014 v1.0 atm debug portstats Display port specific atm statistics. SYNT AX: atm debug portstats port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> [clear = <{disabled|enabled}]> where: port The port for which statistics will be retrieved. REQUIRED clear Clear the statistics after the request. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 37

    atm Commands E-DOC-CTC-20071119-0014 v1.0 37 atm flush Flush all A TM interfaces. ...

  • Technicolor - Thomson TG576 v7 - page 38

    atm Commands 38 E-DOC-CTC-20071119-0014 v1.0 atm ifadd Create a new A TM interface. SYNT AX: atm ifadd intf = <string> where: intf The name for the new A TM interface. If not specified, the destination will double as interface name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 39

    atm Commands E-DOC-CTC-20071119-0014 v1.0 39 atm ifattach Attach an A TM interface. SYNT AX: atm ifattach intf = <{}> where: intf The name of the A TM interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 40

    atm Commands 40 E-DOC-CTC-20071119-0014 v1.0 atm ifconfig Modify an A TM interface. SYNT AX: atm ifconfig intf = <{atm_Internet}> [dest = <{}]> [qos = <{default}]> [clp = <{0|1|classification}]> [clpthresh = <number{0-15}]> [encaps = <{llc|vcmux}]> [fcs = <{disabled|enabled|auto}]> [ulp = <{mac|ip|ppp}]& ...

  • Technicolor - Thomson TG576 v7 - page 41

    atm Commands E-DOC-CTC-20071119-0014 v1.0 41 atm ifdelete Delete an A TM interface. SYNT AX: atm ifdelete intf = <{}> where: intf The name of the A TM interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 42

    atm Commands 42 E-DOC-CTC-20071119-0014 v1.0 atm ifdetach Detach an A TM interface. SYNT AX: atm ifdetach intf = <{}> where: intf The name of the A TM interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 43

    atm Commands E-DOC-CTC-20071119-0014 v1.0 43 atm iflist Display the A TM interfaces. SYNT AX: atm iflist [intf = <{atm_Internet}]> where: intf The name of an A TM interface. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 44

    atm Commands 44 E-DOC-CTC-20071119-0014 v1.0 atm oam cc list Display CC configuration. ...

  • Technicolor - Thomson TG576 v7 - page 45

    atm Commands E-DOC-CTC-20071119-0014 v1.0 45 atm oam cc modify Modify CC on the connection. SYNT AX: atm oam cc modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> [transmit = <{disabled|enabled}]> [receive = <{disabled|enabled}]> [auto = <{disabled|enabled}]> [s ...

  • Technicolor - Thomson TG576 v7 - page 46

    atm Commands 46 E-DOC-CTC-20071119-0014 v1.0 atm oam cc send Send CC activate/deactivate to connection. SYNT AX: atm oam cc send port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> [span = <{segment|end2end}]> [action = <{activate|deactivate}]> [direction = <{source|sink|b ...

  • Technicolor - Thomson TG576 v7 - page 47

    atm Commands E-DOC-CTC-20071119-0014 v1.0 47 atm oam config Modify the A TM OAM settings. SYNT AX: atm oam config [clp = <number{0-1}]> [loopbackid = <string]> where: clp The CLP bit value of the OAM cells. OPTIONAL loopbackid The loopback id (hexadecimal string) for processing of segment loopback cells. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 48

    atm Commands 48 E-DOC-CTC-20071119-0014 v1.0 atm oam list Display the A TM OAM settings. ...

  • Technicolor - Thomson TG576 v7 - page 49

    atm Commands E-DOC-CTC-20071119-0014 v1.0 49 atm oam modify Modify the A TM OAM data blocking mode. SYNT AX: atm oam modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> blocking = <{disabled|enabled}> where: port The port for which OAM blocking is configured. REQUIRED blocking Enable/disable OAM blocking. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 50

    atm Commands 50 E-DOC-CTC-20071119-0014 v1.0 atm oam ping Send A TM loopback cells. SYNT AX: atm oam ping dest = <{atm_pvc_8_35}> [count = <number{1-1000000}]> [interval = <number{100-1000000}]> where: dest The destination address for the request. REQUIRED count The number of pings to send. OPTIONAL interval The interval in millis ...

  • Technicolor - Thomson TG576 v7 - page 51

    atm Commands E-DOC-CTC-20071119-0014 v1.0 51 atm oam vclb add Create a loopback connection for VC SYNT AX: atm oam vclb add port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> where: port The A TM port number . REQUIRED vpi The Virtual Path Identifier . REQUIRED vci The Virtual Channel I ...

  • Technicolor - Thomson TG576 v7 - page 52

    atm Commands 52 E-DOC-CTC-20071119-0014 v1.0 atm oam vclb del Delete a loopback connection for VC SYNT AX: atm oam vclb del port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number> vpi = <number{0-31}> [vci = <number{0-511}]> where: port The A TM port number . REQUIRED vpi The Virtual Path Identifier . REQUIRED vci The Virtual Channel I ...

  • Technicolor - Thomson TG576 v7 - page 53

    atm Commands E-DOC-CTC-20071119-0014 v1.0 53 atm oam vclb list List all VC loopback connections ...

  • Technicolor - Thomson TG576 v7 - page 54

    atm Commands 54 E-DOC-CTC-20071119-0014 v1.0 atm phonebook add Add a new phonebook entry . SYNT AX: atm phonebook add name = <string> addr = <atmchannel : PVC syntax is [port.]vpi.vci port=dsl0|dsl1|...> where: name The phonebook name for this destination. REQUIRED addr The address for this destination. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 55

    atm Commands E-DOC-CTC-20071119-0014 v1.0 55 atm phonebook autolist Display auto PVC's. ...

  • Technicolor - Thomson TG576 v7 - page 56

    atm Commands 56 E-DOC-CTC-20071119-0014 v1.0 atm phonebook delete Delete a phonebook entry . SYNT AX: atm phonebook delete name = <{}> where: name The name of the entry to delete. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 57

    atm Commands E-DOC-CTC-20071119-0014 v1.0 57 atm phonebook flush Flush all phonebook entries. ...

  • Technicolor - Thomson TG576 v7 - page 58

    atm Commands 58 E-DOC-CTC-20071119-0014 v1.0 atm phonebook list Display the phonebook. ...

  • Technicolor - Thomson TG576 v7 - page 59

    atm Commands E-DOC-CTC-20071119-0014 v1.0 59 atm qosbook add Add a new qosbook entry . SYNT AX: atm qosbook add name = <string> [txctd = <{default}]> [rxctd = <{default}]> where: name The name for the new QoS entry . REQUIRED txctd The name of the CTD for transmit (upstream) direction. OPTIONAL rxctd The name of the CTD for receiv ...

  • Technicolor - Thomson TG576 v7 - page 60

    atm Commands 60 E-DOC-CTC-20071119-0014 v1.0 atm qosbook config Modify the qosbook configuration. SYNT AX: atm qosbook config [format = <{bytes|cells}]> where: format The input, output format of the qosbook. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 61

    atm Commands E-DOC-CTC-20071119-0014 v1.0 61 atm qosbook ctdadd Add a new connection traffic descriptor . SYNT AX: atm qosbook ctdadd name = <string> conformance = <{UBR|CBR|VBR|UBR.1|UBR.2| UBR.mdcr|CBR.1|VBR.1|VBR.2|VBR.3|VBR.c|VBR.nt| VBR.t|GFR.1|GFR.2}> [peakrate = <number{0-27786}]> [sustrate = <number{0-27786}]> [maxbu ...

  • Technicolor - Thomson TG576 v7 - page 62

    atm Commands 62 E-DOC-CTC-20071119-0014 v1.0 atm qosbook ctddelete Delete a connection traffic descriptor . SYNT AX: atm qosbook ctddelete name = <{default}> [force = <{disabled|enabled}]> where: name The name of the CTD entry to delete. REQUIRED force Force delete even when the entry is still in use. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 63

    atm Commands E-DOC-CTC-20071119-0014 v1.0 63 atm qosbook ctdlist Display all connection traffic descriptors. ...

  • Technicolor - Thomson TG576 v7 - page 64

    atm Commands 64 E-DOC-CTC-20071119-0014 v1.0 atm qosbook delete Delete a qosbook entry . SYNT AX: atm qosbook delete name = <{default}> [force = <{disabled|enabled}]> where: name The name of the qosbook entry to delete. REQUIRED force Force delete even when the entry is still in use. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 65

    atm Commands E-DOC-CTC-20071119-0014 v1.0 65 atm qosbook flush Flush all qosbook entries. ...

  • Technicolor - Thomson TG576 v7 - page 66

    atm Commands 66 E-DOC-CTC-20071119-0014 v1.0 atm qosbook list Display the qosbook. ...

  • Technicolor - Thomson TG576 v7 - page 67

    autopvc Commands E-DOC-CTC-20071119-0014 v1.0 67 autopvc Commands autopvc config Configure autopvc. see page 68 autopvc list Show retreived information. see page 69 ...

  • Technicolor - Thomson TG576 v7 - page 68

    autopvc Commands 68 E-DOC-CTC-20071119-0014 v1.0 autopvc config Configure autopvc. SYNT AX: autopvc config [mode = <{pseudo|passive|active}]> [type = <{bridge|pppoerelay|ipoa|ethoa|pppoa| pppoe}]> [overwrite = <{disabled|enabled}]> [peakrate = <number{0-27786}]> where: mode Autopvc mode. OPTIONAL type T ype of autopvc. OPTIO ...

  • Technicolor - Thomson TG576 v7 - page 69

    autopvc Commands E-DOC-CTC-20071119-0014 v1.0 69 autopvc list Show retreived information. SYNT AX: autopvc list [table = <{Port|AtmLayer|Vpc|Vcc|Address| AddressRegistrationAdmin|AAL5Profile| AAL2CommonProfile|AAL2TrunkingProfile| AAL2LESProfile|AtmServiceConnInfoExtension| AtmServiceTypeExtension| AAL5ProfileExtension}]> where: table Autopvc ...

  • Technicolor - Thomson TG576 v7 - page 70

    config Commands 70 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 71

    config Commands E-DOC-CTC-20071119-0014 v1.0 71 config Commands config delete Delete a user configuration file. see page 72 config dump Show the saved configuration file see page 73 config flush Flush the loaded configuration. see page 74 config list Show the current configuration set see page 75 config load Load saved or default configuration. see ...

  • Technicolor - Thomson TG576 v7 - page 72

    config Commands 72 E-DOC-CTC-20071119-0014 v1.0 config delete Delete a user configuration file. SYNT AX: config delete [filename = <user configuration filename]> where: filename configuration file to erase OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 73

    config Commands E-DOC-CTC-20071119-0014 v1.0 73 config dump Show the saved configuration file ...

  • Technicolor - Thomson TG576 v7 - page 74

    config Commands 74 E-DOC-CTC-20071119-0014 v1.0 config flush Flush the loaded configuration. SYNT AX: config flush [flush_ip = <{enabled|disabled}]> where: flush_ip Flush IP settings or not. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 75

    config Commands E-DOC-CTC-20071119-0014 v1.0 75 config list Show the current configuration set SYNT AX: config list [templates = <{disabled|enabled}]> where: templates list template files OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 76

    config Commands 76 E-DOC-CTC-20071119-0014 v1.0 config load Load saved or default configuration. SYNT AX: config load [load_ip = <{enabled|disabled}]> [defaults = <{disabled|enabled}]> [flush = <{enabled|disabled}]> [echo = <{disabled|enabled}]> [filename = <string]> where: load_ip Load IP settings or not. OPTIONAL def ...

  • Technicolor - Thomson TG576 v7 - page 77

    config Commands E-DOC-CTC-20071119-0014 v1.0 77 config save Store current configuration to backup file SYNT AX: config save filename = <user configuration filename> where: filename Filename for backupfile of current configuration REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 78

    connection Commands 78 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 79

    connection Commands E-DOC-CTC-20071119-0014 v1.0 79 connection Commands connection appconfig Modify a CONN/NA T application helper configuration see page 80 connection appinfo Display CONN/NA T application specific info see page 81 connection applist Display the available CONN/NA T application helpers. see page 82 connection bind Create a CONN/NA T ...

  • Technicolor - Thomson TG576 v7 - page 80

    connection Commands 80 E-DOC-CTC-20071119-0014 v1.0 connection appconfig Modify a CONN/NA T application helper configuration SYNT AX: connection appconfig application = <{IP6TO4|PPTP|ESP|IKE|SIP| JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245| H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}> [trace = <{disabled|enabled}]> [timeout = <number{ ...

  • Technicolor - Thomson TG576 v7 - page 81

    connection Commands E-DOC-CTC-20071119-0014 v1.0 81 connection appinfo Display CONN/NA T application specific info SYNT AX: connection appinfo application = <{IP6TO4|PPTP|ESP|IKE|SIP| JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245| H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}> where: application The name of a CONN/NA T application helper as listed ...

  • Technicolor - Thomson TG576 v7 - page 82

    connection Commands 82 E-DOC-CTC-20071119-0014 v1.0 connection applist Display the available CONN/NA T application helpers. ...

  • Technicolor - Thomson TG576 v7 - page 83

    connection Commands E-DOC-CTC-20071119-0014 v1.0 83 connection bind Create a CONN/NA T application helper/port binding. SYNT AX: connection bind application = <{IP6TO4|PPTP|ESP|IKE|SIP| JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245| H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}> port = <port-range> where: application The name of a CONN/NA T ...

  • Technicolor - Thomson TG576 v7 - page 84

    connection Commands 84 E-DOC-CTC-20071119-0014 v1.0 connection bindlist Display the CONN/NA T application helper/port bindings. ...

  • Technicolor - Thomson TG576 v7 - page 85

    connection Commands E-DOC-CTC-20071119-0014 v1.0 85 connection clean Clean connection database by forcing timeouts. SYNT AX: connection clean [level = <number{0-9}]> where: level Scrubbing level. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 86

    connection Commands 86 E-DOC-CTC-20071119-0014 v1.0 connection clear Kill all connections. ...

  • Technicolor - Thomson TG576 v7 - page 87

    connection Commands E-DOC-CTC-20071119-0014 v1.0 87 connection config Modify global connection configuration. SYNT AX: connection config [configchangemode = <{immediate|delayed}]> [probes = <{disabled|enabled}]> [udptrackmode = <{strict|loose}]> where: configchangemode Select how config changes are handled. OPTIONAL probes Enable/ ...

  • Technicolor - Thomson TG576 v7 - page 88

    connection Commands 88 E-DOC-CTC-20071119-0014 v1.0 connection debug Connection debug commands. SYNT AX: connection debug [trace = <{disabled|enabled}]> where: trace Enable/disable traces. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 89

    connection Commands E-DOC-CTC-20071119-0014 v1.0 89 connection describe Describe the streams of a connection. SYNT AX: connection describe [id = <number{0-2048}]> where: id The connection ID to describe. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 90

    connection Commands 90 E-DOC-CTC-20071119-0014 v1.0 connection flush Flush the connection configuration. ...

  • Technicolor - Thomson TG576 v7 - page 91

    connection Commands E-DOC-CTC-20071119-0014 v1.0 91 connection info Display all modules with some info. ...

  • Technicolor - Thomson TG576 v7 - page 92

    connection Commands 92 E-DOC-CTC-20071119-0014 v1.0 connection list Display the currently known connections. SYNT AX: connection list [nr = <number{1-2048}]> [history = <{disabled|enabled}]> where: nr The number of connections to display . OPTIONAL history If enabled, show history . OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 93

    connection Commands E-DOC-CTC-20071119-0014 v1.0 93 connection refresh Invalidate all cached decisions. ...

  • Technicolor - Thomson TG576 v7 - page 94

    connection Commands 94 E-DOC-CTC-20071119-0014 v1.0 connection stats Display connection and stream statistics. ...

  • Technicolor - Thomson TG576 v7 - page 95

    connection Commands E-DOC-CTC-20071119-0014 v1.0 95 connection timerclear Clear connection timeout to default. SYNT AX: connection timerclear [timer = <{tcpidle|tcpneg|tcpkill|udpidle| udpkill|icmpkill|ipidle|ipkill|aiprefresh}]> where: timer The name of the connection idle timer . OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 96

    connection Commands 96 E-DOC-CTC-20071119-0014 v1.0 connection timerconfig Modify connection timeout handling. SYNT AX: connection timerconfig [timer = <{tcpidle|tcpneg|tcpkill|udpidle| udpkill|icmpkill|ipidle|ipkill|aiprefresh}]> [value = <number{0-86400}]> where: timer The name of the connection idle timer . OPTIONAL value The timer e ...

  • Technicolor - Thomson TG576 v7 - page 97

    connection Commands E-DOC-CTC-20071119-0014 v1.0 97 connection unbind Delete a CONN/NA T application helper/port binding. SYNT AX: connection unbind application = <{IP6TO4|PPTP|ESP|IKE|SIP| JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|ILS|H245| H323|IRC|GAME(UDP)|CONE(UDP)|LOOSE(UDP)|FTP}> port = <port-range> where: application The name of a CONN/N ...

  • Technicolor - Thomson TG576 v7 - page 98

    cwmp Commands 98 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 99

    cwmp Commands E-DOC-CTC-20071119-0014 v1.0 99 cwmp Commands cwmp config Configure the cwmpd as seen from the ACS. see page 100 cwmp debug traceconfig Enable or disable tracing. see page 102 cwmp server config Configure the cwmpd towards the ACS. see page 103 ...

  • Technicolor - Thomson TG576 v7 - page 100

    cwmp Commands 100 E-DOC-CTC-20071119-0014 v1.0 cwmp config Configure the cwmpd as seen from the ACS. SYNT AX: cwmp config [state = <{disabled|enabled}]> [mode = <{read-only|full}]> [periodicInform = <{disabled|enabled}]> [periodicInfInt = <number]> [sessionTimeout = <number]> [noIpTimeout = <number]> [maxEnvelope ...

  • Technicolor - Thomson TG576 v7 - page 101

    cwmp Commands E-DOC-CTC-20071119-0014 v1.0 101 connectionReqAuth Set the authentication type of modem CWMP server for asynchronous connects. OPTIONAL qos-class Set the quality of service class for outgoing CWMP data. OPTIONAL bootdelayrange Set the delay on boot before inform is sent. OPTIONAL upgradedelay Set whether to delay upgrade if services a ...

  • Technicolor - Thomson TG576 v7 - page 102

    cwmp Commands 102 E-DOC-CTC-20071119-0014 v1.0 cwmp debug traceconfig Enable or disable tracing. SYNT AX: cwmp debug traceconfig [level = <number]> where: level Set the tracelevel (0-1) OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 103

    cwmp Commands E-DOC-CTC-20071119-0014 v1.0 103 cwmp server config Configure the cwmpd towards the ACS. SYNT AX: cwmp server config [url = <string]> [username = <string]> [password = <password]> where: url Set the HTTP URL used to contact the ACS server . OPTIONAL username Set the username for ACS Digest Authentication. OPTIONAL pa ...

  • Technicolor - Thomson TG576 v7 - page 104

    debug Command 104 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 105

    debug Command E-DOC-CTC-20071119-0014 v1.0 105 debug Command Execute a 'T race & Debug' command. For qualified personnel only . SYNT AX: debug exec cmd = <quoted string> where: cmd Quoted 'T race & Debug' command string REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 106

    dhcp Commands 106 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 107

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 107 dhcp Commands dhcp client debug clear Clear DHCP client statistics see page 111 dhcp client debug stats Print DHCP client statistics see page 112 dhcp client debug traceconfig Modify DHCP client trace configuration see page 113 dhcp client flush Delete all DHCP clients. see page 114 dhcp client ifadd C ...

  • Technicolor - Thomson TG576 v7 - page 108

    dhcp Commands 108 E-DOC-CTC-20071119-0014 v1.0 dhcp relay delete Delete an entry from the DHCP forward list. see page 134 dhcp relay flush Flushes the DHCP relay settings. see page 135 dhcp relay ifconfig Configure a relay interface. see page 136 dhcp relay iflist Show the configuration of the relay interfaces. see page 137 dhcp relay list List the ...

  • Technicolor - Thomson TG576 v7 - page 109

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 109 dhcp server option instlist List all DHCP server option instances see page 159 dhcp server option ruleadd Add a selection rule to a DHCP server option instance see page 160 dhcp server option ruledelete Delete a selection rule from a DHCP server option instance see page 161 dhcp server option tmpladd A ...

  • Technicolor - Thomson TG576 v7 - page 110

    dhcp Commands 110 E-DOC-CTC-20071119-0014 v1.0 dhcp spoofing list List the available Spoofing- Associations see page 185 dhcp spoofing option-add Add a DHCP Option Code to a Spoofing-Association. see page 186 dhcp spoofing option-delete Delete a DHCP Option Code from a Spoofing-Association. see page 187 ...

  • Technicolor - Thomson TG576 v7 - page 111

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 111 dhcp client debug clear Clear DHCP client statistics ...

  • Technicolor - Thomson TG576 v7 - page 112

    dhcp Commands 112 E-DOC-CTC-20071119-0014 v1.0 dhcp client debug stats Print DHCP client statistics ...

  • Technicolor - Thomson TG576 v7 - page 113

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 113 dhcp client debug traceconfig Modify DHCP client trace configuration SYNT AX: dhcp client debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 114

    dhcp Commands 114 E-DOC-CTC-20071119-0014 v1.0 dhcp client flush Delete all DHCP clients. ...

  • Technicolor - Thomson TG576 v7 - page 115

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 115 dhcp client ifadd Create a DHCP client. SYNT AX: dhcp client ifadd intf = <{Internet|LocalNetwork}> where: intf The name of the interface on which a DHCP Client is defined. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 116

    dhcp Commands 116 E-DOC-CTC-20071119-0014 v1.0 dhcp client ifattach Activate a DHCP client. SYNT AX: dhcp client ifattach intf = <> where: intf The name of the interface on which a DHCP Client is defined. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 117

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 117 dhcp client ifconfig Configure a DHCP client. SYNT AX: dhcp client ifconfig intf = <> [label = <{None|DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [metric = <number{0-255}]> [dnsmetric = <number{0-100}]> [broadcast = <{disabled|enabled}]> [serverroute ...

  • Technicolor - Thomson TG576 v7 - page 118

    dhcp Commands 118 E-DOC-CTC-20071119-0014 v1.0 dhcp client ifdelete Delete a DHCP client. SYNT AX: dhcp client ifdelete intf = <> where: intf The name of the interface on which a DHCP Client is defined. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 119

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 119 dhcp client ifdetach De-activate a DHCP client and releases its lease. SYNT AX: dhcp client ifdetach intf = <> where: intf The name of the interface on which a DHCP Client is defined. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 120

    dhcp Commands 120 E-DOC-CTC-20071119-0014 v1.0 dhcp client iflist List DHCP clients. SYNT AX: dhcp client iflist [intf = <]> [expand = <{disabled|enabled}]> where: intf The name of the interface on which a DHCP Client is defined. OPTIONAL expand Expand enabled/disabled. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 121

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 121 dhcp client ifrenew Renew a DHCP lease. SYNT AX: dhcp client ifrenew intf = <> where: intf The name of the interface on which a DHCP Client is defined. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 122

    dhcp Commands 122 E-DOC-CTC-20071119-0014 v1.0 dhcp client rqoptions add Add a DHCP Option Code to the Parameter Request List. SYNT AX: dhcp client rqoptions add intf = <> option = <{subnet-mask|time-offset|default- routers|time-servers|ien116-name-impress- servers|resource-location-servers|host- name|boot-file-size|merit-dump|domain-name| ...

  • Technicolor - Thomson TG576 v7 - page 123

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 123 dhcp client rqoptions delete Delete a DHCP Option Code from the Parameter Request List. SYNT AX: dhcp client rqoptions delete intf = <> option = <{subnet-mask|time-offset|default- routers|time-servers|ien116-name-impress- servers|resource-location-servers|host- name|boot-file-size|merit-dump|d ...

  • Technicolor - Thomson TG576 v7 - page 124

    dhcp Commands 124 E-DOC-CTC-20071119-0014 v1.0 dhcp client rqoptions list List all DHCP Option Codes in the Parameter Request List. SYNT AX: dhcp client rqoptions list [intf = <]> where: intf The name of the interface on which a DHCP Client is defined. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 125

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 125 dhcp client rqoptions optionlist List all DHCP Option Codes that can be used in the Parameter Request List. ...

  • Technicolor - Thomson TG576 v7 - page 126

    dhcp Commands 126 E-DOC-CTC-20071119-0014 v1.0 dhcp client txoptions add Add an option. SYNT AX: dhcp client txoptions add intf = <> option = <{subnet-mask|time-offset|default- routers|time-servers|ien116-name-impress- servers|resource-location-servers|host- name|boot-file-size|merit-dump|domain-name| swap-server|root-path|extensions-path| ...

  • Technicolor - Thomson TG576 v7 - page 127

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 127 dhcp client txoptions delete Delete an option. SYNT AX: dhcp client txoptions delete intf = <> option = <{subnet-mask|time-offset|default- routers|time-servers|ien116-name-impress- servers|resource-location-servers|host- name|boot-file-size|merit-dump|domain-name| swap-server|root-path|extensi ...

  • Technicolor - Thomson TG576 v7 - page 128

    dhcp Commands 128 E-DOC-CTC-20071119-0014 v1.0 dhcp client txoptions list List all options. SYNT AX: dhcp client txoptions list [intf = <]> [expand = <{disabled|enabled}]> where: intf The name of the interface on which a DHCP Client is defined. OPTIONAL expand Expand enabled/disabled. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 129

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 129 dhcp client txoptions optionlist Lists all DHCP Option Codes that can be used. ...

  • Technicolor - Thomson TG576 v7 - page 130

    dhcp Commands 130 E-DOC-CTC-20071119-0014 v1.0 dhcp relay add Add an entry to the DHCP forward list. SYNT AX: dhcp relay add name = <string> where: name The forward entry name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 131

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 131 dhcp relay config Sets the relay configuration settings. SYNT AX: dhcp relay config [agentinfo = <{disabled|enabled}]> [agentmismatch = <{disabled|enabled}]> where: agentinfo Set the relay agent info status (RFC3046). OPTIONAL agentmismatch Forward/Drop DHCP reply packet when a relay agent ...

  • Technicolor - Thomson TG576 v7 - page 132

    dhcp Commands 132 E-DOC-CTC-20071119-0014 v1.0 dhcp relay debug stats Print DHCP relay statistics. ...

  • Technicolor - Thomson TG576 v7 - page 133

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 133 dhcp relay debug traceconfig Modify DHCP relay trace configuration SYNT AX: dhcp relay debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 134

    dhcp Commands 134 E-DOC-CTC-20071119-0014 v1.0 dhcp relay delete Delete an entry from the DHCP forward list. SYNT AX: dhcp relay delete name = <{LocalNetwork_to_127.0.0.1}> where: name The forward entry name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 135

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 135 dhcp relay flush Flushes the DHCP relay settings. ...

  • Technicolor - Thomson TG576 v7 - page 136

    dhcp Commands 136 E-DOC-CTC-20071119-0014 v1.0 dhcp relay ifconfig Configure a relay interface. SYNT AX: dhcp relay ifconfig intf = <{LocalNetwork|Internet}> [relay = <{disabled|enabled}]> [maxhops = <number{0-16}]> [remoteid = <password]> [trusted = <{disabled|enabled}]> where: intf The name of the relay interface to ...

  • Technicolor - Thomson TG576 v7 - page 137

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 137 dhcp relay iflist Show the configuration of the relay interfaces. SYNT AX: dhcp relay iflist [intf = <{LocalNetwork|Internet}]> where: intf The name of the relay interface. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 138

    dhcp Commands 138 E-DOC-CTC-20071119-0014 v1.0 dhcp relay list List the DHCP forward list. SYNT AX: dhcp relay list [name = <{LocalNetwork_to_127.0.0.1}]> where: name The forward entry name. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 139

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 139 dhcp relay modify Modify an entry from the DHCP forward list. SYNT AX: dhcp relay modify name = <{LocalNetwork_to_127.0.0.1}> [addr = <ip-address]> [intf = <{None|LocalNetwork|Internet}]> [giaddr = <ip-address]> [script = <]> where: name The forward entry name. REQUIRED ad ...

  • Technicolor - Thomson TG576 v7 - page 140

    dhcp Commands 140 E-DOC-CTC-20071119-0014 v1.0 dhcp relay ruleadd Add a selection rule to a DHCP forward entry SYNT AX: dhcp relay ruleadd name = <{LocalNetwork_to_127.0.0.1}> [key = <{or|and}]> rulename = <> where: name The name of the forward entry . REQUIRED key The logical key of the selection rule. OPTIONAL rulename The name ...

  • Technicolor - Thomson TG576 v7 - page 141

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 141 dhcp relay ruledelete Delete a selection rule from a DHCP forward entry SYNT AX: dhcp relay ruledelete name = <{LocalNetwork_to_127.0.0.1}> rulename = <> where: name The name of the forward entry . REQUIRED rulename The name of the DHCP selection rule. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 142

    dhcp Commands 142 E-DOC-CTC-20071119-0014 v1.0 dhcp rule add Add a rule for DHCP conditional selection SYNT AX: dhcp rule add name = <string> type = <{option|mac|vci|uci}> option [!] = <{subnet-mask|time-offset| default-routers|time-servers|ien116-servers| impress-servers|resource-location-servers| host-name|boot-file-size|merit-dump ...

  • Technicolor - Thomson TG576 v7 - page 143

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 143 dhcp rule debug traceconfig Modify DHCP rule trace configuration SYNT AX: dhcp rule debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 144

    dhcp Commands 144 E-DOC-CTC-20071119-0014 v1.0 dhcp rule delete Delete a DHCP rule SYNT AX: dhcp rule delete name = <> where: name The name of the DHCP rule. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 145

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 145 dhcp rule flush Flush all DHCP rules ...

  • Technicolor - Thomson TG576 v7 - page 146

    dhcp Commands 146 E-DOC-CTC-20071119-0014 v1.0 dhcp rule list List all DHCP rules ...

  • Technicolor - Thomson TG576 v7 - page 147

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 147 dhcp server config Print DHCP server configuration settings SYNT AX: dhcp server config [state = <{disabled|enabled}]> where: state Enable/Disable the DHCP server . OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 148

    dhcp Commands 148 E-DOC-CTC-20071119-0014 v1.0 dhcp server debug clear Clear DHCP server statistics ...

  • Technicolor - Thomson TG576 v7 - page 149

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 149 dhcp server debug stats Print DHCP server statistics ...

  • Technicolor - Thomson TG576 v7 - page 150

    dhcp Commands 150 E-DOC-CTC-20071119-0014 v1.0 dhcp server debug traceconfig Modify DHCP server trace configuration SYNT AX: dhcp server debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 151

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 151 dhcp server flush Flush all DHCP server pool and lease entries ...

  • Technicolor - Thomson TG576 v7 - page 152

    dhcp Commands 152 E-DOC-CTC-20071119-0014 v1.0 dhcp server lease add Add a DHCP server lease SYNT AX: dhcp server lease add clientid = <clientid> pool = <{LAN_private}> [addr = <ip-address]> [offset = <number]> [leasetime = <number]> [expirytime = <number]> [gateway = <ip-address|0|none]> [macaddr = <har ...

  • Technicolor - Thomson TG576 v7 - page 153

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 153 dhcp server lease delete Delete a DHCP server lease SYNT AX: dhcp server lease delete [clientid = <clientid]> [index = <number]> [expand = <{disabled|enabled}]> where: clientid The DHCP client identification string. OPTIONAL index The DHCP server lease table index. OPTIONAL expand Exp ...

  • Technicolor - Thomson TG576 v7 - page 154

    dhcp Commands 154 E-DOC-CTC-20071119-0014 v1.0 dhcp server lease flush Flush all DHCP server leases SYNT AX: dhcp server lease flush [pool = <{LAN_private}]> where: pool The name of the DHCP server pool. Only the leases belonging to this pool will be deleted. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 155

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 155 dhcp server lease list List all DHCP server leases SYNT AX: dhcp server lease list [clientid = <clientid]> [index = <number]> [expand = <{disabled|enabled}]> where: clientid The DHCP client identification string. OPTIONAL index The DHCP server lease table index. OPTIONAL expand Expand ...

  • Technicolor - Thomson TG576 v7 - page 156

    dhcp Commands 156 E-DOC-CTC-20071119-0014 v1.0 dhcp server option flush Flush all DHCP server option templates and instances ...

  • Technicolor - Thomson TG576 v7 - page 157

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 157 dhcp server option instadd Add a DHCP server option instance SYNT AX: dhcp server option instadd name = <string> tmplname = <> [policy = <{requested|always|rules}]> [dynamic = <{disabled|enabled}]> [maxuse = <number{1-255}]> [enterprise = <number{1-2147483647}]> [sub ...

  • Technicolor - Thomson TG576 v7 - page 158

    dhcp Commands 158 E-DOC-CTC-20071119-0014 v1.0 dhcp server option instdelete Delete a DHCP server option instance SYNT AX: dhcp server option instdelete name = <> [enterprise = <number{1--1}]> [suboption = <number{1-254}]> where: name The name of the DHCP server option instance. REQUIRED enterprise The enterprise number (see http: ...

  • Technicolor - Thomson TG576 v7 - page 159

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 159 dhcp server option instlist List all DHCP server option instances SYNT AX: dhcp server option instlist [name = <]> where: name The name of the DHCP server option instance. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 160

    dhcp Commands 160 E-DOC-CTC-20071119-0014 v1.0 dhcp server option ruleadd Add a selection rule to a DHCP server option instance SYNT AX: dhcp server option ruleadd name = <> [key = <{or|and}]> rulename = <> where: name The name of the DHCP server option instance. REQUIRED key The logical key of the selection rule. OPTIONAL rulenam ...

  • Technicolor - Thomson TG576 v7 - page 161

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 161 dhcp server option ruledelete Delete a selection rule from a DHCP server option instance SYNT AX: dhcp server option ruledelete name = <> rulename = <> where: name The name of the DHCP server option instance. REQUIRED rulename The name of the DHCP selection rule. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 162

    dhcp Commands 162 E-DOC-CTC-20071119-0014 v1.0 dhcp server option tmpladd Add a DHCP server option template SYNT AX: dhcp server option tmpladd name = <string> optionid = <number{1-254}> [dynamic = <{disabled|enabled}]> where: name The name of the DHCP server option template. REQUIRED optionid Specify the DHCP server option code. ...

  • Technicolor - Thomson TG576 v7 - page 163

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 163 dhcp server option tmpldelete Delete a DHCP server option template SYNT AX: dhcp server option tmpldelete name = <> where: name The name of the DHCP server option template. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 164

    dhcp Commands 164 E-DOC-CTC-20071119-0014 v1.0 dhcp server option tmpllist List all DHCP server option templates ...

  • Technicolor - Thomson TG576 v7 - page 165

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 165 dhcp server policy Print DHCP server policy settings SYNT AX: dhcp server policy [verifyfirst = <{disabled|enabled}]> [trustclient = <{disabled|enabled}]> [rtbehaviour = <{traditional|standard|msft}]> where: verifyfirst Enable/Disable IP address conflict network probing before handing ...

  • Technicolor - Thomson TG576 v7 - page 166

    dhcp Commands 166 E-DOC-CTC-20071119-0014 v1.0 dhcp server pool add Add a DHCP server pool SYNT AX: dhcp server pool add name = <string> [index = <number]> where: name The name of the DHCP server pool. REQUIRED index The number of the pool before which you want the new pool to be added. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 167

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 167 dhcp server pool config Configure a DHCP server pool SYNT AX: dhcp server pool config name = <{LAN_private}> [state = <{disabled|enabled}]> [intf = <{Internet|LocalNetwork}]> [index = <number]> [poolstart = <ip-address]> [poolend = <ip-address]> [netmask = <ip-mas ...

  • Technicolor - Thomson TG576 v7 - page 168

    dhcp Commands 168 E-DOC-CTC-20071119-0014 v1.0 secdns The IP address of the secondary DNS server for DHCP clients. OPTIONAL dnsmetric The DHCP server pool DNS route metric. OPTIONAL primwins The IP address of the primary WINS server for DHCP clients. OPTIONAL secwins The IP address of the secondary WINS server for DHCP clients. OPTIONAL leasetime T ...

  • Technicolor - Thomson TG576 v7 - page 169

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 169 dhcp server pool delete Delete a DHCP server pool SYNT AX: dhcp server pool delete name = <{LAN_private}> where: name The name of the DHCP server pool. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 170

    dhcp Commands 170 E-DOC-CTC-20071119-0014 v1.0 dhcp server pool flush Flush all DHCP server pools ...

  • Technicolor - Thomson TG576 v7 - page 171

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 171 dhcp server pool list List all DHCP server pools SYNT AX: dhcp server pool list [name = <{LAN_private}]> where: name The name of the DHCP server pool. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 172

    dhcp Commands 172 E-DOC-CTC-20071119-0014 v1.0 dhcp server pool optadd Add an option instance to the DHCP server pool SYNT AX: dhcp server pool optadd name = <{LAN_private}> instname = <> where: name The name of the DHCP server pool. REQUIRED instname The name of the DHCP server option instance. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 173

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 173 dhcp server pool optdelete Delete an option instance from the DHCP server pool SYNT AX: dhcp server pool optdelete name = <{LAN_private}> instname = <> where: name The name of the DHCP server pool. REQUIRED instname The name of the DHCP server option instance. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 174

    dhcp Commands 174 E-DOC-CTC-20071119-0014 v1.0 dhcp server pool rtadd Add a route to the DHCP server pool SYNT AX: dhcp server pool rtadd name = <{LAN_private}> dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [gateway = <ip-address|0]> where: name The name of the DHCP server pool. REQUIRED dst The IP destination addr ...

  • Technicolor - Thomson TG576 v7 - page 175

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 175 dhcp server pool rtdelete Delete a route from the DHCP server pool SYNT AX: dhcp server pool rtdelete name = <{LAN_private}> dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [gateway = <ip-address|0]> where: name The name of the DHCP server pool. REQUIRED dst The IP desti ...

  • Technicolor - Thomson TG576 v7 - page 176

    dhcp Commands 176 E-DOC-CTC-20071119-0014 v1.0 dhcp server pool ruleadd Add a selection rule to the DHCP server pool SYNT AX: dhcp server pool ruleadd name = <{LAN_private}> [key = <{or|and}]> rulename = <> where: name The name of the DHCP server pool. REQUIRED key The logical key of the selection rule. OPTIONAL rulename The name ...

  • Technicolor - Thomson TG576 v7 - page 177

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 177 dhcp server pool ruledelete Delete a selection rule from the DHCP server pool SYNT AX: dhcp server pool ruledelete name = <{LAN_private}> rulename = <> where: name The name of the DHCP server pool. REQUIRED rulename The name of the DHCP selection rule. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 178

    dhcp Commands 178 E-DOC-CTC-20071119-0014 v1.0 dhcp spoofing add Add a Spoofing-Association SYNT AX: dhcp spoofing add name = <string> pool_name = <{LAN_private}> ifname = <> where: name The name of the Association. REQUIRED pool_name The name of the pool to be associated. REQUIRED ifname The name of the interface on which a DHCP ...

  • Technicolor - Thomson TG576 v7 - page 179

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 179 dhcp spoofing attach Enable a Spoofing-Association SYNT AX: dhcp spoofing attach name = <{|||}> where: name The name of the Association. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 180

    dhcp Commands 180 E-DOC-CTC-20071119-0014 v1.0 dhcp spoofing config Display/modify dhcp spoofing state SYNT AX: dhcp spoofing config [state = <{enabled|disabled}]> where: state Enable/Disable spoofing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 181

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 181 dhcp spoofing debug traceconfig Display/modify DHCP spoofing trace configuratin SYNT AX: dhcp spoofing debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 182

    dhcp Commands 182 E-DOC-CTC-20071119-0014 v1.0 dhcp spoofing delete Delete a Spoofing-Association SYNT AX: dhcp spoofing delete name = <{|||}> where: name The name of the Association. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 183

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 183 dhcp spoofing detach Disable a Spoofing-Association SYNT AX: dhcp spoofing detach name = <{|||}> where: name The name of the Association. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 184

    dhcp Commands 184 E-DOC-CTC-20071119-0014 v1.0 dhcp spoofing flush Flush all the associations and the options. ...

  • Technicolor - Thomson TG576 v7 - page 185

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 185 dhcp spoofing list List the available Spoofing-Associations SYNT AX: dhcp spoofing list [name = <{|||}]> where: name The name of the Association. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 186

    dhcp Commands 186 E-DOC-CTC-20071119-0014 v1.0 dhcp spoofing option-add Add a DHCP Option Code to a Spoofing-Association. SYNT AX: dhcp spoofing option-add name = <{|||}> option = <number> where: name The name of the Association. REQUIRED option The option id. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 187

    dhcp Commands E-DOC-CTC-20071119-0014 v1.0 187 dhcp spoofing option-delete Delete a DHCP Option Code from a Spoofing-Association. SYNT AX: dhcp spoofing option-delete name = <{|||}> option = <number> where: name The name of the Association. REQUIRED option The option id. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 188

    dns Commands 188 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 189

    dns Commands E-DOC-CTC-20071119-0014 v1.0 189 dns Commands dns client config Modify the DNS resolver configuration. see page 190 dns client dnsadd Add a DNS server . see page 191 dns client dnsdelete Delete a DNS server . see page 192 dns client dnslist List all DNS servers. see page 193 dns client flush Remove all DNS servers. see page 194 dns cli ...

  • Technicolor - Thomson TG576 v7 - page 190

    dns Commands 190 E-DOC-CTC-20071119-0014 v1.0 dns client config Modify the DNS resolver configuration. SYNT AX: dns client config [timeout = <number{1-900}]> [retry = <number{0-10}]> [search = <{disabled|enabled}]> [list = <string]> [trace = <{disabled|enabled}]> where: timeout The query timeout in seconds. OPTIONAL re ...

  • Technicolor - Thomson TG576 v7 - page 191

    dns Commands E-DOC-CTC-20071119-0014 v1.0 191 dns client dnsadd Add a DNS server . SYNT AX: dns client dnsadd addr = <string> [port = <number]> where: addr The DNS server IP address. REQUIRED port The DNS server port number . OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 192

    dns Commands 192 E-DOC-CTC-20071119-0014 v1.0 dns client dnsdelete Delete a DNS server . SYNT AX: dns client dnsdelete index = <number{1-99}> where: index The index number (shown by the 'list' command) of the server to delete. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 193

    dns Commands E-DOC-CTC-20071119-0014 v1.0 193 dns client dnslist List all DNS servers. ...

  • Technicolor - Thomson TG576 v7 - page 194

    dns Commands 194 E-DOC-CTC-20071119-0014 v1.0 dns client flush Remove all DNS servers. ...

  • Technicolor - Thomson TG576 v7 - page 195

    dns Commands E-DOC-CTC-20071119-0014 v1.0 195 dns client nslookup DNS lookup for a domain name or an address. SYNT AX: dns client nslookup host = <string> where: host The DNS domain name string to query . REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 196

    dns Commands 196 E-DOC-CTC-20071119-0014 v1.0 dns server config DNS server configuration settings SYNT AX: dns server config [domain = <string]> [timeout = <number{0-2147483647}]> [suppress = <number]> [state = <{disabled|enabled}]> [trace = <{disabled|enabled}]> [syslog = <{disabled|enabled}]> [WANDownSpoofing = ...

  • Technicolor - Thomson TG576 v7 - page 197

    dns Commands E-DOC-CTC-20071119-0014 v1.0 197 dns server debug clear Clear the DNS server/forwarder statistics. ...

  • Technicolor - Thomson TG576 v7 - page 198

    dns Commands 198 E-DOC-CTC-20071119-0014 v1.0 dns server debug spoof clear Clear the intercept cache table ...

  • Technicolor - Thomson TG576 v7 - page 199

    dns Commands E-DOC-CTC-20071119-0014 v1.0 199 dns server debug spoof getaddress Get the real ip for the given spoofed ip SYNT AX: dns server debug spoof getaddress addr = <ip-address> where: addr The spoofed ip to look up. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 200

    dns Commands 200 E-DOC-CTC-20071119-0014 v1.0 dns server debug spoof getflags Get the error flags for the given spoofed ip SYNT AX: dns server debug spoof getflags addr = <ip-address> where: addr The spoofed ip to look up. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 201

    dns Commands E-DOC-CTC-20071119-0014 v1.0 201 dns server debug spoof list List the intercept cache table. ...

  • Technicolor - Thomson TG576 v7 - page 202

    dns Commands 202 E-DOC-CTC-20071119-0014 v1.0 dns server debug spoof update update the intercept cache table ...

  • Technicolor - Thomson TG576 v7 - page 203

    dns Commands E-DOC-CTC-20071119-0014 v1.0 203 dns server debug stats Print the DNS server/forwarder statistics. ...

  • Technicolor - Thomson TG576 v7 - page 204

    dns Commands 204 E-DOC-CTC-20071119-0014 v1.0 dns server flush Flush all local DNS hosts and routes. ...

  • Technicolor - Thomson TG576 v7 - page 205

    dns Commands E-DOC-CTC-20071119-0014 v1.0 205 dns server host add Add a local DNS host SYNT AX: dns server host add name = <string> [addr = <ip-address]> [ttl = <number{0-2147483647}]> where: name The name of an IP host to add. REQUIRED addr The IP address of the host. OPTIONAL ttl The lifetime of the host. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 206

    dns Commands 206 E-DOC-CTC-20071119-0014 v1.0 dns server host delete Delete a local DNS host SYNT AX: dns server host delete name = <string> where: name The name of an IP host to delete. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 207

    dns Commands E-DOC-CTC-20071119-0014 v1.0 207 dns server host flush Flush all local DNS hosts ...

  • Technicolor - Thomson TG576 v7 - page 208

    dns Commands 208 E-DOC-CTC-20071119-0014 v1.0 dns server host list List all local DNS hosts ...

  • Technicolor - Thomson TG576 v7 - page 209

    dns Commands E-DOC-CTC-20071119-0014 v1.0 209 dns server route add Creates a DNS forwarding entry or template SYNT AX: dns server route add dns = <ip-address> [src = <ip-address]> [srcmask = <ip-mask(dotted or cidr)]> [domain = <string]> [metric = <number{0-100}]> [label = <{None|DSCP|Interactive|Management| Video|V ...

  • Technicolor - Thomson TG576 v7 - page 210

    dns Commands 210 E-DOC-CTC-20071119-0014 v1.0 dns server route delete Deletes a DNS forwarding entry or template SYNT AX: dns server route delete dns = <ip-address> [domain = <string]> [intf = <{loop|Internet|LocalNetwork}]> where: dns The IP address of a DNS server . REQUIRED domain The DNS domain string. OPTIONAL intf The interf ...

  • Technicolor - Thomson TG576 v7 - page 211

    dns Commands E-DOC-CTC-20071119-0014 v1.0 211 dns server route flush Removes all DNS forwarding entries and templates ...

  • Technicolor - Thomson TG576 v7 - page 212

    dns Commands 212 E-DOC-CTC-20071119-0014 v1.0 dns server route list Lists all DNS forwarding entries and templates ...

  • Technicolor - Thomson TG576 v7 - page 213

    dsd Commands E-DOC-CTC-20071119-0014 v1.0 213 dsd Commands dsd config Display/modify DSD framework configuration see page 214 dsd debug config Display/modify DSD debug settings see page 215 dsd debug connection list Display internal connection pool usage see page 216 dsd debug proxy Display/modify HTTPI fixed proxy settings see page 217 dsd debug r ...

  • Technicolor - Thomson TG576 v7 - page 214

    dsd Commands 214 E-DOC-CTC-20071119-0014 v1.0 dsd config Display/modify DSD framework configuration SYNT AX: dsd config [state = <{disabled|enabled|automatic}]> where: state DSD framework operation mode OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 215

    dsd Commands E-DOC-CTC-20071119-0014 v1.0 215 dsd debug config Display/modify DSD debug settings SYNT AX: dsd debug config [turbomode = <{disabled|enabled}]> where: turbomode Enable/disable turbomode OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 216

    dsd Commands 216 E-DOC-CTC-20071119-0014 v1.0 dsd debug connection list Display internal connection pool usage SYNT AX: dsd debug connection list [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 217

    dsd Commands E-DOC-CTC-20071119-0014 v1.0 217 dsd debug proxy Display/modify HTTPI fixed proxy settings SYNT AX: dsd debug proxy [state = <{disabled|enabled}]> [dest = <ip-address]> [port = <{at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|data|gopher| h323|httpproxy|ike|ils|imap2|imap3|ingres- net|ipcserver|ipx|ir ...

  • Technicolor - Thomson TG576 v7 - page 218

    dsd Commands 218 E-DOC-CTC-20071119-0014 v1.0 dsd debug recycling Display/modify HTTPI recycling settings SYNT AX: dsd debug recycling [state = <{disabled|enabled}]> [interval = <number]> [httpidle = <number]> [otheridle = <number]> where: state Enable/disable stream recycling OPTIONAL interval T ime between successive activ ...

  • Technicolor - Thomson TG576 v7 - page 219

    dsd Commands E-DOC-CTC-20071119-0014 v1.0 219 dsd debug stats Display/clear DSD framework and module statistics SYNT AX: dsd debug stats [name = <{intercept|urlfilter|recycling| syslog|all}]> [clear = <{no|yes}]> where: name Specify the name of a module OPTIONAL clear Clear the specified statistics OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 220

    dsd Commands 220 E-DOC-CTC-20071119-0014 v1.0 dsd intercept config Display/modify HTTP Intercept configuration SYNT AX: dsd intercept config [WDSpoofedIP = <ip-address]> [servertimeout = <number]> [connecterrorurl = <string]> [categoryerrorurl = <string]> [monitorintercepturl = <string]> [unauthorizedrequrl = <strin ...

  • Technicolor - Thomson TG576 v7 - page 221

    dsd Commands E-DOC-CTC-20071119-0014 v1.0 221 dsd syslog config Display/modify HTTPI logging configuration SYNT AX: dsd syslog config [syslog = <{none|unauthorized|errors| intercepted|all}]> where: syslog Define which type of events to log OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 222

    dsd Commands 222 E-DOC-CTC-20071119-0014 v1.0 dsd syslog list Display HTTPI log file ...

  • Technicolor - Thomson TG576 v7 - page 223

    dsd Commands E-DOC-CTC-20071119-0014 v1.0 223 dsd urlfilter config Display/modify url filtering configuration SYNT AX: dsd urlfilter config [state = <{disabled|enabled}]> [blockproxy = <{disabled|enabled}]> [blockipaddress = <{disabled|enabled}]> [blockobscuredip = <{disabled|enabled}]> [defaultaction = <{block|accept}]&g ...

  • Technicolor - Thomson TG576 v7 - page 224

    dsd Commands 224 E-DOC-CTC-20071119-0014 v1.0 dsd urlfilter rule add Add a rule SYNT AX: dsd urlfilter rule add url = <string> action = <{block|accept|redirect}> redirect = <string> where: url Definition of the url filter REQUIRED action Action to perform when url matches url REQUIRED redirect Redirection url REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 225

    dsd Commands E-DOC-CTC-20071119-0014 v1.0 225 dsd urlfilter rule delete Remove a rule SYNT AX: dsd urlfilter rule delete index = <number> [url = <string]> where: index Insertion position in the list REQUIRED url Definition of the url filter OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 226

    dsd Commands 226 E-DOC-CTC-20071119-0014 v1.0 dsd urlfilter rule flush Remove all current rules ...

  • Technicolor - Thomson TG576 v7 - page 227

    dsd Commands E-DOC-CTC-20071119-0014 v1.0 227 dsd urlfilter rule list Display a list of current rules ...

  • Technicolor - Thomson TG576 v7 - page 228

    dsd Commands 228 E-DOC-CTC-20071119-0014 v1.0 dsd urlfilter rule modify Modify an existing rule SYNT AX: dsd urlfilter rule modify index = <number> [newurl = <string]> action = <{block|accept|redirect}> redirect = <string> where: index Insertion position in the list REQUIRED newurl Definition of the new url filter OPTIONAL a ...

  • Technicolor - Thomson TG576 v7 - page 229

    dyndns Commands E-DOC-CTC-20071119-0014 v1.0 229 dyndns Commands dyndns add Add a dynamic DNS client. see page 230 dyndns delete Delete a dynamic DNS client. see page 231 dyndns flush Delete all dynamic DNS clients. see page 232 dyndns host add Add a fully qualified host name see page 233 dyndns host delete Delete a host name see page 234 dyndns ho ...

  • Technicolor - Thomson TG576 v7 - page 230

    dyndns Commands 230 E-DOC-CTC-20071119-0014 v1.0 dyndns add Add a dynamic DNS client. SYNT AX: dyndns add name = <string> where: name The dynamic DNS client name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 231

    dyndns Commands E-DOC-CTC-20071119-0014 v1.0 231 dyndns delete Delete a dynamic DNS client. SYNT AX: dyndns delete name = <> where: name The dynamic DNS client name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 232

    dyndns Commands 232 E-DOC-CTC-20071119-0014 v1.0 dyndns flush Delete all dynamic DNS clients. ...

  • Technicolor - Thomson TG576 v7 - page 233

    dyndns Commands E-DOC-CTC-20071119-0014 v1.0 233 dyndns host add Add a fully qualified host name SYNT AX: dyndns host add group = <> name = <string> where: group The dynamic DNS host group. REQUIRED name The name of an IP host to add. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 234

    dyndns Commands 234 E-DOC-CTC-20071119-0014 v1.0 dyndns host delete Delete a host name SYNT AX: dyndns host delete name = <> where: name The name of an IP host to delete. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 235

    dyndns Commands E-DOC-CTC-20071119-0014 v1.0 235 dyndns host flush Delete all host names ...

  • Technicolor - Thomson TG576 v7 - page 236

    dyndns Commands 236 E-DOC-CTC-20071119-0014 v1.0 dyndns host list List all host names ...

  • Technicolor - Thomson TG576 v7 - page 237

    dyndns Commands E-DOC-CTC-20071119-0014 v1.0 237 dyndns list List all dynamic DNS clients. ...

  • Technicolor - Thomson TG576 v7 - page 238

    dyndns Commands 238 E-DOC-CTC-20071119-0014 v1.0 dyndns modify Modify a dynamic DNS client. SYNT AX: dyndns modify name = <> [intf = <{loop|Internet|LocalNetwork}]> [user = <string]> [password = <password]> [group = <]> [mx = <string]> [backmx = <{disabled|enabled}]> [wildcard = <{disabled|enabled}]> ...

  • Technicolor - Thomson TG576 v7 - page 239

    dyndns Commands E-DOC-CTC-20071119-0014 v1.0 239 dyndns service list List all dynamic DNS services ...

  • Technicolor - Thomson TG576 v7 - page 240

    dyndns Commands 240 E-DOC-CTC-20071119-0014 v1.0 dyndns service modify Modify specific dynamic DNS service settings SYNT AX: dyndns service modify name = <{dyndns|statdns|custom|No-IP|DtDNS| gnudip}> [server = <string]> [port = <{at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|data|gopher| h323|httpproxy|ike|ils|im ...

  • Technicolor - Thomson TG576 v7 - page 241

    env Commands E-DOC-CTC-20071119-0014 v1.0 241 env Commands env flush Remove all non-system environment variables. see page 242 env get Gets an environment variable. see page 243 env list List all environment variables. see page 244 env set Sets an environment variable. see page 245 env unset Deletes an environment variable. see page 246 ...

  • Technicolor - Thomson TG576 v7 - page 242

    env Commands 242 E-DOC-CTC-20071119-0014 v1.0 env flush Remove all non-system environment variables. ...

  • Technicolor - Thomson TG576 v7 - page 243

    env Commands E-DOC-CTC-20071119-0014 v1.0 243 env get Gets an environment variable. SYNT AX: env get var = <{_ETHERNET|_COMPANY_NAME|_COMPANY_URL| _PROD_NAME|_PROD_URL|_PROD_SERIAL_NBR|_FII| _BUILD|_BOOTLOADER_VERSION|_BUILDVARIANT| _MODEM_ACCESS_CODE|__SEC_MODEM_ACCESS_CODE| _OUI|_CUSTOVARIANT|_PHYSLAYERTYPE|_BUILDNAME| _PRL|_FIA|_BOARD_NAME|_C ...

  • Technicolor - Thomson TG576 v7 - page 244

    env Commands 244 E-DOC-CTC-20071119-0014 v1.0 env list List all environment variables. ...

  • Technicolor - Thomson TG576 v7 - page 245

    env Commands E-DOC-CTC-20071119-0014 v1.0 245 env set Sets an environment variable. SYNT AX: env set var = <string> value = <translated string> where: var The name of the variable. REQUIRED value A translated quoted string defining the variable value. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 246

    env Commands 246 E-DOC-CTC-20071119-0014 v1.0 env unset Deletes an environment variable. SYNT AX: env unset var = <{_ETHERNET|_COMPANY_NAME|_COMPANY_URL| _PROD_NAME|_PROD_URL|_PROD_SERIAL_NBR|_FII| _BUILD|_BOOTLOADER_VERSION|_BUILDVARIANT| _MODEM_ACCESS_CODE|__SEC_MODEM_ACCESS_CODE| _OUI|_CUSTOVARIANT|_PHYSLAYERTYPE|_BUILDNAME| _PRL|_FIA|_BOARD_ ...

  • Technicolor - Thomson TG576 v7 - page 247

    eth Commands E-DOC-CTC-20071119-0014 v1.0 247 eth Commands eth bridge add Add a new bridge instance. see page 251 eth bridge clear Clear bridge statistics. see page 252 eth bridge config Modify/Display the bridge configuration settings. see page 253 eth bridge delete Delete a bridge instance. see page 254 eth bridge dynvlan actlist Display the acti ...

  • Technicolor - Thomson TG576 v7 - page 248

    eth Commands 248 E-DOC-CTC-20071119-0014 v1.0 eth bridge igmpsnooping list Display bridge instance snooped groups. see page 274 eth bridge list Display the current bridge instances. see page 275 eth bridge macadd Add a static MAC address to a bridge interface. see page 276 eth bridge macdelete Remove a MAC address from the database. see page 277 et ...

  • Technicolor - Thomson TG576 v7 - page 249

    eth Commands E-DOC-CTC-20071119-0014 v1.0 249 eth bridge xtratag list Display all extra tag mapping entries. see page 296 eth device ifconfig Configure ethernet interface. see page 297 eth device iflist Show status of ethernet interfaces. see page 298 eth flush Flush all ETH interfaces. see page 299 eth ifadd Create a new ETH interface. see page 30 ...

  • Technicolor - Thomson TG576 v7 - page 250

    eth Commands 250 E-DOC-CTC-20071119-0014 v1.0 eth switch share list Display shared ports. see page 322 eth switch storm ifconfig Configure per port storm control parameters. see page 323 eth switch storm iflist Display storm control configuration per port. see page 324 eth vlan add Add a new virtual LAN. see page 325 eth vlan delete Delete a virtua ...

  • Technicolor - Thomson TG576 v7 - page 251

    eth Commands E-DOC-CTC-20071119-0014 v1.0 251 eth bridge add Add a new bridge instance. SYNT AX: eth bridge add brname = <string> where: brname The name of the new bridge instance. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 252

    eth Commands 252 E-DOC-CTC-20071119-0014 v1.0 eth bridge clear Clear bridge statistics. SYNT AX: eth bridge clear [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 253

    eth Commands E-DOC-CTC-20071119-0014 v1.0 253 eth bridge config Modify/Display the bridge configuration settings. SYNT AX: eth bridge config [brname = <{bridge}]> [age = <number{10-1000000}]> [filter = <{none|no_WAN_broadcast}]> [vlan = <{disabled|enabled}]> [precedencemap = <string]> where: brname The name of a bridge ...

  • Technicolor - Thomson TG576 v7 - page 254

    eth Commands 254 E-DOC-CTC-20071119-0014 v1.0 eth bridge delete Delete a bridge instance. SYNT AX: eth bridge delete brname = <{bridge}> where: brname The name of a bridge instance. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 255

    eth Commands E-DOC-CTC-20071119-0014 v1.0 255 eth bridge dynvlan actlist Display the active MAC entries for the dynamic VLAN membership. ...

  • Technicolor - Thomson TG576 v7 - page 256

    eth Commands 256 E-DOC-CTC-20071119-0014 v1.0 eth bridge dynvlan add Add a dynamic VLAN membership entry . SYNT AX: eth bridge dynvlan add [id = <number{0-100000}]> hwaddr = <masked-hardware-address> vlan = <{default}> [remvlan = <{default}]> where: id The id of the dynamic VLAN membership entry . OPTIONAL hwaddr The (masked ...

  • Technicolor - Thomson TG576 v7 - page 257

    eth Commands E-DOC-CTC-20071119-0014 v1.0 257 eth bridge dynvlan config Modify the dynamic VLAN membership configuration. SYNT AX: eth bridge dynvlan config [timeout = <number{0-100000}]> where: timeout T imeout in seconds for the dynamic entries. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 258

    eth Commands 258 E-DOC-CTC-20071119-0014 v1.0 eth bridge dynvlan delete Delete a dynamic VLAN membership entry . SYNT AX: eth bridge dynvlan delete id = <number{0-100000}> where: id REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 259

    eth Commands E-DOC-CTC-20071119-0014 v1.0 259 eth bridge dynvlan flush Flush all dynamic VLAN membership entries. ...

  • Technicolor - Thomson TG576 v7 - page 260

    eth Commands 260 E-DOC-CTC-20071119-0014 v1.0 eth bridge dynvlan list Display a dynamic VLAN membership entry . ...

  • Technicolor - Thomson TG576 v7 - page 261

    eth Commands E-DOC-CTC-20071119-0014 v1.0 261 eth bridge flush Flush all bridge instances with their interfaces and properties. SYNT AX: eth bridge flush [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 262

    eth Commands 262 E-DOC-CTC-20071119-0014 v1.0 eth bridge ifadd Add a new bridge interface. SYNT AX: eth bridge ifadd [brname = <{bridge}]> intf = <string> where: brname The name of a bridge instance. OPTIONAL intf The new bridge interface name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 263

    eth Commands E-DOC-CTC-20071119-0014 v1.0 263 eth bridge ifattach Attach a bridge interface. SYNT AX: eth bridge ifattach [brname = <{bridge}]> intf = <{}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 264

    eth Commands 264 E-DOC-CTC-20071119-0014 v1.0 eth bridge ifconfig Modify a bridge interface configuration. SYNT AX: eth bridge ifconfig [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [dest = <{}]> [portstate = <{disabled|learning|forwarding}]> [retry = <number{0-65535}]> [priotag = <{ ...

  • Technicolor - Thomson TG576 v7 - page 265

    eth Commands E-DOC-CTC-20071119-0014 v1.0 265 regenprio The priority regeneration table for tagged ingress packets. OPTIONAL ingressfiltering Enable/disable discard of tagged ingress packets if the interface is not part of the VLAN. OPTIONAL acceptvlanonly Enable/disable receipt of tagged ingress packets. OPTIONAL mcastfilter Enable/disable discard ...

  • Technicolor - Thomson TG576 v7 - page 266

    eth Commands 266 E-DOC-CTC-20071119-0014 v1.0 eth bridge ifdelete Delete a bridge interface. SYNT AX: eth bridge ifdelete [brname = <{bridge}]> intf = <{ethport1|ethport2|ethport3|ethport4| WLAN}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 267

    eth Commands E-DOC-CTC-20071119-0014 v1.0 267 eth bridge ifdetach Detach a bridge interface. SYNT AX: eth bridge ifdetach [brname = <{bridge}]> intf = <{ethport1|ethport2|ethport3|ethport4| WLAN}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 268

    eth Commands 268 E-DOC-CTC-20071119-0014 v1.0 eth bridge ifflush flush the bridge interfaces: detach/delete all interfaces. SYNT AX: eth bridge ifflush [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 269

    eth Commands E-DOC-CTC-20071119-0014 v1.0 269 eth bridge iflist Display the current bridge interfaces. SYNT AX: eth bridge iflist [brname = <{bridge}]> [intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}]> where: brname The name of a bridge instance. OPTIONAL intf The name of a bridge interface. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 270

    eth Commands 270 E-DOC-CTC-20071119-0014 v1.0 eth bridge igmpsnooping clear Clear snooping statistics. SYNT AX: eth bridge igmpsnooping clear [brname = <{bridge}]> [intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}]> where: brname The name of a bridge instance. OPTIONAL intf The bridge interface currently to be cleared. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 271

    eth Commands E-DOC-CTC-20071119-0014 v1.0 271 eth bridge igmpsnooping config Configure bridge instance IGMP Snooping flags. SYNT AX: eth bridge igmpsnooping config [brname = <{bridge}]> [state = <{disabled|enabled}]> [floodrp = <{disabled|enabled}]> [floodmcast = <{disabled|enabled}]> where: brname The name of a bridge insta ...

  • Technicolor - Thomson TG576 v7 - page 272

    eth Commands 272 E-DOC-CTC-20071119-0014 v1.0 eth bridge igmpsnooping ifconfig Configure bridge interface IGMP snooping flags and mode. SYNT AX: eth bridge igmpsnooping ifconfig [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [portmode = <{Host|Router|Auto}]> [fastleave = <{disabled|enabled}]> ...

  • Technicolor - Thomson TG576 v7 - page 273

    eth Commands E-DOC-CTC-20071119-0014 v1.0 273 eth bridge igmpsnooping iflist Display bridge interface IGMP status. SYNT AX: eth bridge igmpsnooping iflist [brname = <{bridge}]> [intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}]> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge interface. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 274

    eth Commands 274 E-DOC-CTC-20071119-0014 v1.0 eth bridge igmpsnooping list Display bridge instance snooped groups. SYNT AX: eth bridge igmpsnooping list [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 275

    eth Commands E-DOC-CTC-20071119-0014 v1.0 275 eth bridge list Display the current bridge instances. SYNT AX: eth bridge list [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 276

    eth Commands 276 E-DOC-CTC-20071119-0014 v1.0 eth bridge macadd Add a static MAC address to a bridge interface. SYNT AX: eth bridge macadd [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> hwaddr = <hardware-address> [vlan = <{default}]> where: brname The name of a bridge instance. OPTIONAL intf ...

  • Technicolor - Thomson TG576 v7 - page 277

    eth Commands E-DOC-CTC-20071119-0014 v1.0 277 eth bridge macdelete Remove a MAC address from the database. SYNT AX: eth bridge macdelete [brname = <{bridge}]> hwaddr = <hardware-address> [vlan = <{default}]> where: brname The name of a bridge instance. OPTIONAL hwaddr The ethernet MAC address of the entry . REQUIRED vlan The VLAN. ...

  • Technicolor - Thomson TG576 v7 - page 278

    eth Commands 278 E-DOC-CTC-20071119-0014 v1.0 eth bridge maclist Display the MAC address database. SYNT AX: eth bridge maclist [brname = <{bridge}]> where: brname The name of a bridge instance. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 279

    eth Commands E-DOC-CTC-20071119-0014 v1.0 279 eth bridge rule add Add a new constraint to the VLAN learning system. SYNT AX: eth bridge rule add type = <{shared|independant}> vlan = <{default}> [vlan2 = <{default}]> [isi = <number{0-32}]> where: type T ype of constraint. REQUIRED vlan The VLAN where the constraint belongs to ...

  • Technicolor - Thomson TG576 v7 - page 280

    eth Commands 280 E-DOC-CTC-20071119-0014 v1.0 eth bridge rule delete Delete a constraint from the VLAN learning system. SYNT AX: eth bridge rule delete index = <number{0-32}> where: index Index of the constraint. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 281

    eth Commands E-DOC-CTC-20071119-0014 v1.0 281 eth bridge rule flush Flush all constraints from the VLAN learning system. ...

  • Technicolor - Thomson TG576 v7 - page 282

    eth Commands 282 E-DOC-CTC-20071119-0014 v1.0 eth bridge rule list Display all constraints from the VLAN learning system. ...

  • Technicolor - Thomson TG576 v7 - page 283

    eth Commands E-DOC-CTC-20071119-0014 v1.0 283 eth bridge select Select the default bridge for configuring interfaces from (if not setting SYNT AX: eth bridge select brname = <{bridge}> where: brname The name of a bridge instance. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 284

    eth Commands 284 E-DOC-CTC-20071119-0014 v1.0 eth bridge unknownvlan ifadd Add bridge interface to unknown 'VLAN'. SYNT AX: eth bridge unknownvlan ifadd [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [untagged = <{disabled|enabled}]> where: brname The name of a bridge instance. OPTIONAL in ...

  • Technicolor - Thomson TG576 v7 - page 285

    eth Commands E-DOC-CTC-20071119-0014 v1.0 285 eth bridge unknownvlan ifconfig Modify bridge interface from unknown 'VLAN'. SYNT AX: eth bridge unknownvlan ifconfig [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [untagged = <{disabled|enabled}]> where: brname The name of a bridge instance. ...

  • Technicolor - Thomson TG576 v7 - page 286

    eth Commands 286 E-DOC-CTC-20071119-0014 v1.0 eth bridge unknownvlan ifdelete Delete bridge interface from unknown 'VLAN'. SYNT AX: eth bridge unknownvlan ifdelete [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge int ...

  • Technicolor - Thomson TG576 v7 - page 287

    eth Commands E-DOC-CTC-20071119-0014 v1.0 287 eth bridge unknownvlan iflist Display all interfaces of the unknown 'VLAN'. ...

  • Technicolor - Thomson TG576 v7 - page 288

    eth Commands 288 E-DOC-CTC-20071119-0014 v1.0 eth bridge vlan ifadd Add bridge interface to virtual LAN. SYNT AX: eth bridge vlan ifadd name = <{default}> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> [untagged = <{disabled|enabled}]> where: name The VLAN name. REQUIRED intf The name of the bridge interface to add to th ...

  • Technicolor - Thomson TG576 v7 - page 289

    eth Commands E-DOC-CTC-20071119-0014 v1.0 289 eth bridge vlan ifconfig Modify bridge interface from virtual LAN. SYNT AX: eth bridge vlan ifconfig name = <{default}> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> untagged = <{disabled|enabled}> where: name The VLAN name. REQUIRED intf The bridge interface from the VLAN t ...

  • Technicolor - Thomson TG576 v7 - page 290

    eth Commands 290 E-DOC-CTC-20071119-0014 v1.0 eth bridge vlan ifdelete Delete bridge interface from virtual LAN. SYNT AX: eth bridge vlan ifdelete name = <{default}> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> where: name The VLAN name. REQUIRED intf The name of the bridge interface to remove from the VLAN. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 291

    eth Commands E-DOC-CTC-20071119-0014 v1.0 291 eth bridge vlan iflist Display all vitual LAN's. ...

  • Technicolor - Thomson TG576 v7 - page 292

    eth Commands 292 E-DOC-CTC-20071119-0014 v1.0 eth bridge xtratag add Add an extra tag mapping entry . SYNT AX: eth bridge xtratag add [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> innervid = <{[1-4094]|all|}> outervid = <{[1-4094]|notag|transparant|}> where: brname The name of a bridge instan ...

  • Technicolor - Thomson TG576 v7 - page 293

    eth Commands E-DOC-CTC-20071119-0014 v1.0 293 eth bridge xtratag config Configure an extra tag mapping entry . SYNT AX: eth bridge xtratag config [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> innervid = <{[1-4094]|all|}> outervid = <{[1-4094]|notag|transparant|}> where: brname The name of a b ...

  • Technicolor - Thomson TG576 v7 - page 294

    eth Commands 294 E-DOC-CTC-20071119-0014 v1.0 eth bridge xtratag delete Delete an extra tag mapping entry . SYNT AX: eth bridge xtratag delete [brname = <{bridge}]> intf = <{OBC|ethport1|ethport2|ethport3| ethport4|WLAN}> innervid = <{[1-4094]|all|}> where: brname The name of a bridge instance. OPTIONAL intf The name of the bridge ...

  • Technicolor - Thomson TG576 v7 - page 295

    eth Commands E-DOC-CTC-20071119-0014 v1.0 295 eth bridge xtratag flush Flush all extra tag mapping entries. ...

  • Technicolor - Thomson TG576 v7 - page 296

    eth Commands 296 E-DOC-CTC-20071119-0014 v1.0 eth bridge xtratag list Display all extra tag mapping entries. ...

  • Technicolor - Thomson TG576 v7 - page 297

    eth Commands E-DOC-CTC-20071119-0014 v1.0 297 eth device ifconfig Configure ethernet interface. SYNT AX: eth device ifconfig intf = <{ethif1|ethif2|ethif3|ethif4|wlif1}> [type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD| 100BaseTFD} or number]> [state = <{enabled|disabled}]> where: intf The name of a physical interface. REQUIRED type ...

  • Technicolor - Thomson TG576 v7 - page 298

    eth Commands 298 E-DOC-CTC-20071119-0014 v1.0 eth device iflist Show status of ethernet interfaces. ...

  • Technicolor - Thomson TG576 v7 - page 299

    eth Commands E-DOC-CTC-20071119-0014 v1.0 299 eth flush Flush all ETH interfaces. ...

  • Technicolor - Thomson TG576 v7 - page 300

    eth Commands 300 E-DOC-CTC-20071119-0014 v1.0 eth ifadd Create a new ETH interface. SYNT AX: eth ifadd intf = <string> where: intf The name for the new ETH interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 301

    eth Commands E-DOC-CTC-20071119-0014 v1.0 301 eth ifattach Attach an ETH interface. SYNT AX: eth ifattach intf = <{}> where: intf The name of the ETH interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 302

    eth Commands 302 E-DOC-CTC-20071119-0014 v1.0 eth ifconfig Modify an ETH interface. SYNT AX: eth ifconfig intf = <{ethoa_8_35}> [dest = <{bridge|ethoa_8_35}]> [retry = <number{0-65535}]> [wan = <{disabled|enabled}]> [priotag = <{disabled|enabled}]> [vlan = <{default}]> where: intf The name of the ETH interface to ...

  • Technicolor - Thomson TG576 v7 - page 303

    eth Commands E-DOC-CTC-20071119-0014 v1.0 303 eth ifdelete Delete an ETH interface. SYNT AX: eth ifdelete intf = <{}> where: intf The name of the ETH interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 304

    eth Commands 304 E-DOC-CTC-20071119-0014 v1.0 eth ifdetach Detach an ETH interface. SYNT AX: eth ifdetach intf = <{ethoa_8_35}> where: intf The name of the ETH interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 305

    eth Commands E-DOC-CTC-20071119-0014 v1.0 305 eth iflist Display the ETH interfaces. SYNT AX: eth iflist [intf = <{ethoa_8_35}]> where: intf The name of an ETH interface. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 306

    eth Commands 306 E-DOC-CTC-20071119-0014 v1.0 eth switch group flush T o set all ports to the default settings (all ports in group 0). ...

  • Technicolor - Thomson TG576 v7 - page 307

    eth Commands E-DOC-CTC-20071119-0014 v1.0 307 eth switch group list List all configured groups. ...

  • Technicolor - Thomson TG576 v7 - page 308

    eth Commands 308 E-DOC-CTC-20071119-0014 v1.0 eth switch group move Move a specified port to a specified group. SYNT AX: eth switch group move group = <number{0-3}> port = <number{1-4}> where: group The group id. REQUIRED port The port. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 309

    eth Commands E-DOC-CTC-20071119-0014 v1.0 309 eth switch info Display switch capabilities ...

  • Technicolor - Thomson TG576 v7 - page 310

    eth Commands 310 E-DOC-CTC-20071119-0014 v1.0 eth switch mirror capture Define the specified port to be the Mirror Capture Port. SYNT AX: eth switch mirror capture port = <number{1-4}> where: port The port. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 311

    eth Commands E-DOC-CTC-20071119-0014 v1.0 311 eth switch mirror egress Enable or disable the specified port to be a T ransmitted Port Mirroring. SYNT AX: eth switch mirror egress port = <number{1-4}> [state = <{enabled|disabled}]> where: port The port. REQUIRED state Enable/disable state. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 312

    eth Commands 312 E-DOC-CTC-20071119-0014 v1.0 eth switch mirror ingress Enable or disable the specified port to be a Received Port Mirroring. SYNT AX: eth switch mirror ingress port = <number{1-4}> [state = <{enabled|disabled}]> where: port The port. REQUIRED state Enable/disable state. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 313

    eth Commands E-DOC-CTC-20071119-0014 v1.0 313 eth switch qos config Configure common qos parameters. SYNT AX: eth switch qos config state = <{enabled|disabled}> [nbrOfQueues = <number{0-4}]> [realtime = <{enabled|disabled}]> where: state Enable/disable QoS. REQUIRED nbrOfQueues Number of queues. OPTIONAL realtime Enable/disable re ...

  • Technicolor - Thomson TG576 v7 - page 314

    eth Commands 314 E-DOC-CTC-20071119-0014 v1.0 eth switch qos ifconfig Configure per port qos parameters. SYNT AX: eth switch qos ifconfig port = <number{1-4}> mode = <{none|802.1p|high|diffserv}> [flowcontrol = <{disabled|enabled}]> where: port The port. REQUIRED mode Classifier . REQUIRED flowcontrol Enable/disable flow-control. ...

  • Technicolor - Thomson TG576 v7 - page 315

    eth Commands E-DOC-CTC-20071119-0014 v1.0 315 eth switch qos list Display qos configuration. ...

  • Technicolor - Thomson TG576 v7 - page 316

    eth Commands 316 E-DOC-CTC-20071119-0014 v1.0 eth switch qos weights Configure the queue weights. SYNT AX: eth switch qos weights queue0 = <number{0-100}> queue1 = <number{0-100}> queue2 = <number{0-100}> queue3 = <number{0-100}> where: queue0 Weight of queue 0 in WFQ (in %). REQUIRED queue1 Weight of queue 1 in WFQ (in %). ...

  • Technicolor - Thomson TG576 v7 - page 317

    eth Commands E-DOC-CTC-20071119-0014 v1.0 317 eth switch shaper config Configure common ingress shaper parameters. SYNT AX: eth switch shaper config shaper = <number{0--1}> [unicast = <{enabled|disabled}]> [multicast = <{enabled|disabled}]> [broadcast = <{enabled|disabled}]> [control = <{enabled|disabled}]> [unknown = ...

  • Technicolor - Thomson TG576 v7 - page 318

    eth Commands 318 E-DOC-CTC-20071119-0014 v1.0 eth switch shaper ifconfig Configure per port shaper parameters. SYNT AX: eth switch shaper ifconfig port = <number{1-4}> ingress = <{enabled|disabled}> shaper = <number{0--1}> [state = <{enabled|disabled}]> [speed = <number{64000-100000000}]> [burstsize = <{}]> where ...

  • Technicolor - Thomson TG576 v7 - page 319

    eth Commands E-DOC-CTC-20071119-0014 v1.0 319 eth switch shaper iflist Display shaper configuration per port. ...

  • Technicolor - Thomson TG576 v7 - page 320

    eth Commands 320 E-DOC-CTC-20071119-0014 v1.0 eth switch share add Add a port to be shared. SYNT AX: eth switch share add port = <number{1-4}> shared = <number{1-4}> where: port The port. REQUIRED shared The shared port. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 321

    eth Commands E-DOC-CTC-20071119-0014 v1.0 321 eth switch share delete Delete a shared port. SYNT AX: eth switch share delete port = <number{1-4}> shared = <number{1-4}> where: port The port. REQUIRED shared The shared port. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 322

    eth Commands 322 E-DOC-CTC-20071119-0014 v1.0 eth switch share list Display shared ports. ...

  • Technicolor - Thomson TG576 v7 - page 323

    eth Commands E-DOC-CTC-20071119-0014 v1.0 323 eth switch storm ifconfig Configure per port storm control parameters. SYNT AX: eth switch storm ifconfig port = <number{1-4}> [state = <{enabled|disabled}]> [rate = <{100|200|300|400}]> [burstsize = <number{2-8}]> [broadcast = <{enabled|disabled}]> [multicast = <{enable ...

  • Technicolor - Thomson TG576 v7 - page 324

    eth Commands 324 E-DOC-CTC-20071119-0014 v1.0 eth switch storm iflist Display storm control configuration per port. ...

  • Technicolor - Thomson TG576 v7 - page 325

    eth Commands E-DOC-CTC-20071119-0014 v1.0 325 eth vlan add Add a new virtual LAN. SYNT AX: eth vlan add name = <string> vid = <number{2-4094}> [addrule = <{disabled|enabled}]> where: name The new VLAN name. REQUIRED vid The new VLAN id. REQUIRED addrule Add the default bridge constraint. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 326

    eth Commands 326 E-DOC-CTC-20071119-0014 v1.0 eth vlan delete Delete a virtual LAN. SYNT AX: eth vlan delete name = <{default}> where: name The VLAN name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 327

    eth Commands E-DOC-CTC-20071119-0014 v1.0 327 eth vlan flush Flush all virtual LAN's. ...

  • Technicolor - Thomson TG576 v7 - page 328

    eth Commands 328 E-DOC-CTC-20071119-0014 v1.0 eth vlan list Display all virtual LAN's. ...

  • Technicolor - Thomson TG576 v7 - page 329

    exit Command E-DOC-CTC-20071119-0014 v1.0 329 exit Command Exits this shell. ...

  • Technicolor - Thomson TG576 v7 - page 330

    expr Commands 330 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 331

    expr Commands E-DOC-CTC-20071119-0014 v1.0 331 expr Commands expr add Add an expression. see page 332 expr delete Delete an expression. see page 335 expr flush Flush all expressions. see page 336 expr list List expressions. see page 337 expr modify Modify an expression. see page 338 ...

  • Technicolor - Thomson TG576 v7 - page 332

    expr Commands 332 E-DOC-CTC-20071119-0014 v1.0 expr add Add an expression. SYNT AX: expr add name = <{wan|local|lan|tunnel|dmz|guest| private|ssdp_ip|mdap_ip|icmp|igmp|imaps|pop2| pop3|pop3s|smtp|ssh|dns|nntp|ipsec|esp|ah| ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog}> [type = <{intf|ip|serv|mac}]> mac [!] = <hardware- ...

  • Technicolor - Thomson TG576 v7 - page 333

    expr Commands E-DOC-CTC-20071119-0014 v1.0 333 ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds| nicname|nntp|ntalk|ntp|pcmail-srv|pop2|pop3| printer|qotd|realaudio|rip|rtelnet|rtsp|sip| smtp|snmp|snmptrap|snpp|sntp|sql* ...

  • Technicolor - Thomson TG576 v7 - page 334

    expr Commands 334 E-DOC-CTC-20071119-0014 v1.0 precedence [!] The precedence in the IP packet (part of tos). If a value is preceded by a “!”, it means NOT . OPTIONAL dscp [!] The diffserv code point in the IP packet (part of tos). If a value is preceded by a “!”, it means NOT . OPTIONAL proto [!] The IP protocol (name or number) in the IP p ...

  • Technicolor - Thomson TG576 v7 - page 335

    expr Commands E-DOC-CTC-20071119-0014 v1.0 335 expr delete Delete an expression. SYNT AX: expr delete name = <{wan|local|lan|tunnel|dmz|guest| private|ssdp_ip|mdap_ip|icmp|igmp|imaps|pop2| pop3|pop3s|smtp|ssh|dns|nntp|ipsec|esp|ah| ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog}> [index = <number]> where: name The name of a ...

  • Technicolor - Thomson TG576 v7 - page 336

    expr Commands 336 E-DOC-CTC-20071119-0014 v1.0 expr flush Flush all expressions. ...

  • Technicolor - Thomson TG576 v7 - page 337

    expr Commands E-DOC-CTC-20071119-0014 v1.0 337 expr list List expressions. SYNT AX: expr list [name = <{_intf_0|_intf_1|_intf_2|DHCP- R_if_0|wan|local|lan|tunnel|dmz|TELNET_if_0| DNS-S_if_0|PING_RESPONDER_if_0|MDAP_if_0| PPTPD_if_0|PPTPGRE_if_0|_addr_127_0_0_1| _addr_10_0_0_138|_addr_192_168_1_254|private| ssdp_ip|mdap_ip|DHCP-R_sv_0|icmp|igmp|f ...

  • Technicolor - Thomson TG576 v7 - page 338

    expr Commands 338 E-DOC-CTC-20071119-0014 v1.0 expr modify Modify an expression. SYNT AX: expr modify name = <{wan|local|lan|tunnel|dmz|guest| private|ssdp_ip|mdap_ip|icmp|igmp|imaps|pop2| pop3|pop3s|smtp|ssh|dns|nntp|ipsec|esp|ah| ike|DiffServ|sip|h323|dhcp|rtsp|ssdp_serv| mdap_serv|syslog}> [type = <{intf|ip|serv|mac}]> index = <nu ...

  • Technicolor - Thomson TG576 v7 - page 339

    expr Commands E-DOC-CTC-20071119-0014 v1.0 339 [dstport [!] = <{at-echo|at-nbp|at-rtmp|at- zis|auth|bgp|biff|bootpc|bootps|finger|ftp| ftp-data|gopher|h323|httpproxy|ike|ils|imap2| imap3|ingres-net|ipcserver|ipx|irc-o|irc-u| kerberos|ldap|login|netbios-dgm|netbios-ns| netbios-ssn|netwall|netware-ip|new-rwho|nfds| nicname|nntp|ntalk|ntp|pcmail-sr ...

  • Technicolor - Thomson TG576 v7 - page 340

    expr Commands 340 E-DOC-CTC-20071119-0014 v1.0 tos [!] The T ype Of Service specification in the IP packet. If a value is preceded by a “!”, it means NOT . OPTIONAL precedence [!] The precedence in the IP packet (part of tos). If a value is preceded by a “!”, it means NOT . OPTIONAL dscp [!] The diffserv code point in the IP packet (part of ...

  • Technicolor - Thomson TG576 v7 - page 341

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 341 firewall Commands firewall chain add Add a chain. see page 342 firewall chain delete Delete a chain. see page 343 firewall chain flush Flush all chains. see page 344 firewall chain list Display a list of chains. see page 345 firewall clear Clear firewall configuration. see page 346 firewall config ...

  • Technicolor - Thomson TG576 v7 - page 342

    firewall Commands 342 E-DOC-CTC-20071119-0014 v1.0 firewall chain add Add a chain. SYNT AX: firewall chain add chain = <string> where: chain The name of the chain to add. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 343

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 343 firewall chain delete Delete a chain. SYNT AX: firewall chain delete chain = <chain name> where: chain The name of the chain to delete. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 344

    firewall Commands 344 E-DOC-CTC-20071119-0014 v1.0 firewall chain flush Flush all chains. ...

  • Technicolor - Thomson TG576 v7 - page 345

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 345 firewall chain list Display a list of chains. SYNT AX: firewall chain list [format = <{pretty|cli}]> where: format The format of the chain list. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 346

    firewall Commands 346 E-DOC-CTC-20071119-0014 v1.0 firewall clear Clear firewall configuration. ...

  • Technicolor - Thomson TG576 v7 - page 347

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 347 firewall config Display/Modify firewall configuration. SYNT AX: firewall config [state = <{disabled|enabled}]> [keep = <{disabled|enabled}]> [tcpchecks = <{none|fast|exact}]> [udpchecks = <{disabled|enabled}]> [icmpchecks = <{disabled|enabled}]> [logdefault = <{disa ...

  • Technicolor - Thomson TG576 v7 - page 348

    firewall Commands 348 E-DOC-CTC-20071119-0014 v1.0 firewall debug clear Clear firewall statistics. ...

  • Technicolor - Thomson TG576 v7 - page 349

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 349 firewall debug stats Display firewall statistics. ...

  • Technicolor - Thomson TG576 v7 - page 350

    firewall Commands 350 E-DOC-CTC-20071119-0014 v1.0 firewall level add Add a new security level. SYNT AX: firewall level add name = <string> [index = <number]> [readonly = <{disabled|enabled}]> [udptrackmode = <{strict|loose}]> [service = <{disabled|enabled}]> [proxy = <{disabled|enabled}]> [text = <quoted stri ...

  • Technicolor - Thomson TG576 v7 - page 351

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 351 firewall level delete Delete a security level. SYNT AX: firewall level delete name = <security level name> where: name The name of the security level to delete. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 352

    firewall Commands 352 E-DOC-CTC-20071119-0014 v1.0 firewall level flush Flush security level configuration. ...

  • Technicolor - Thomson TG576 v7 - page 353

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 353 firewall level list List all security levels. SYNT AX: firewall level list [format = <{pretty|cli}]> where: format The format of the security level list. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 354

    firewall Commands 354 E-DOC-CTC-20071119-0014 v1.0 firewall level modify Modify a security level. SYNT AX: firewall level modify name = <security level name> [index = <number]> [readonly = <{disabled|enabled}]> [udptrackmode = <{strict|loose}]> [service = <{disabled|enabled}]> [proxy = <{disabled|enabled}]> [text ...

  • Technicolor - Thomson TG576 v7 - page 355

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 355 firewall level set Set/Display active security level. SYNT AX: firewall level set [name = <security level name]> where: name The name of the security level to set active. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 356

    firewall Commands 356 E-DOC-CTC-20071119-0014 v1.0 firewall list Display firewall configuration. SYNT AX: firewall list [format = <{pretty|cli}]> where: format The format of the firewall list. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 357

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 357 firewall rule add Add a rule. SYNT AX: firewall rule add chain = <chain name> [index = <number]> [name = <string]> [clink = <chain name]> [srcintf [!] = <{wan|local|lan|tunnel|dmz| guest}]> [srcip [!] = <{private|ssdp_ip|mdap_ip}]> [dstintf [!] = <{wan|local|l ...

  • Technicolor - Thomson TG576 v7 - page 358

    firewall Commands 358 E-DOC-CTC-20071119-0014 v1.0 log Disable/Enable logging when this rule applies. OPTIONAL state Disable/Enable this rule. OPTIONAL action The action to be taken when this rule applies ('link' when clink is used). REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 359

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 359 firewall rule delete Delete a rule. SYNT AX: firewall rule delete chain = <chain name> index = <number> where: chain The name of the chain in which to delete the rule. REQUIRED index The number of the rule in the chain. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 360

    firewall Commands 360 E-DOC-CTC-20071119-0014 v1.0 firewall rule flush Flush all rules. SYNT AX: firewall rule flush [chain = <chain name]> where: chain The name of the chain to flush. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 361

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 361 firewall rule list Display a list of rules. SYNT AX: firewall rule list [chain = <chain name]> [format = <{pretty|cli}]> where: chain The name of the chain to list the rules of. OPTIONAL format The format of the rule list. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 362

    firewall Commands 362 E-DOC-CTC-20071119-0014 v1.0 firewall rule modify Modify a rule. SYNT AX: firewall rule modify chain = <chain name> [index = <number]> [newindex = <number]> [name = <string]> [clink = <chain name]> [[!]srcintf] = <chain name]> [[!]srcip] = <chain name]> [[!]dstintf] = <chain name]&g ...

  • Technicolor - Thomson TG576 v7 - page 363

    firewall Commands E-DOC-CTC-20071119-0014 v1.0 363 state Disable/Enable this rule. OPTIONAL action The action to be taken when this rule applies ('link' when clink is used). OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 364

    grp Commands 364 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 365

    grp Commands E-DOC-CTC-20071119-0014 v1.0 365 grp Commands grp config Set the grp configuration settings. see page 366 grp flush Flush grp interface settings and parameters. see page 367 grp rip config Set the RIP configuration settings. see page 368 grp rip flush Flush RIP interface settings and global parameters. see page 369 grp rip ifconfig Con ...

  • Technicolor - Thomson TG576 v7 - page 366

    grp Commands 366 E-DOC-CTC-20071119-0014 v1.0 grp config Set the grp configuration settings. SYNT AX: grp config [cdistance = <number{0-255}]> [kdistance = <number{0-255}]> [rdistance = <number{0-255}]> [trace = <{disabled|enabled}]> where: cdistance Set the distance of the connected route type. Default distance is 0. OPTION ...

  • Technicolor - Thomson TG576 v7 - page 367

    grp Commands E-DOC-CTC-20071119-0014 v1.0 367 grp flush Flush grp interface settings and parameters. ...

  • Technicolor - Thomson TG576 v7 - page 368

    grp Commands 368 E-DOC-CTC-20071119-0014 v1.0 grp rip config Set the RIP configuration settings. SYNT AX: grp rip config state = <{disabled|enabled}> [version = <{rip_unspec|rip_v1|rip_v2}]> [updatetime = <number{1-3600}]> where: state Enable/Disable the RIP daemon. REQUIRED version Set the RIP version. OPTIONAL updatetime Set the ...

  • Technicolor - Thomson TG576 v7 - page 369

    grp Commands E-DOC-CTC-20071119-0014 v1.0 369 grp rip flush Flush RIP interface settings and global parameters. ...

  • Technicolor - Thomson TG576 v7 - page 370

    grp Commands 370 E-DOC-CTC-20071119-0014 v1.0 grp rip ifconfig Configure a RIP interface. SYNT AX: grp rip ifconfig intf = <{LocalNetwork|Internet}> [rip = <{disabled|enabled}]> [rxversion = <{rip_unspec|rip_v1|rip_v2| rip_v1-2}]> [authmode = <{none|cleartext}]> [authstr = <password]> [splithorizon = <{disabled|enab ...

  • Technicolor - Thomson TG576 v7 - page 371

    grp Commands E-DOC-CTC-20071119-0014 v1.0 371 grp rip show Show the RIP settings and the routes in the RIP database. ...

  • Technicolor - Thomson TG576 v7 - page 372

    grp Commands 372 E-DOC-CTC-20071119-0014 v1.0 grp rtlist Show the current routes in the grp routing table. SYNT AX: grp rtlist [dst = <ip-address]> [dstmsk = <ip-mask(dotted or cidr)]> where: dst The destination IP address using this route. Supports ip/mask notation. OPTIONAL dstmsk The destination IP address mask. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 373

    help Command E-DOC-CTC-20071119-0014 v1.0 373 help Command Displays this help information ...

  • Technicolor - Thomson TG576 v7 - page 374

    hostmgr Commands 374 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 375

    hostmgr Commands E-DOC-CTC-20071119-0014 v1.0 375 hostmgr Commands hostmgr add Add host device info to hostmgr see page 376 hostmgr clear Remove all hosts from list see page 377 hostmgr config Config hostmgr parameters see page 378 hostmgr delete Delete host device info from hostmgr see page 379 hostmgr flush Flushes hostmgr configuration (i.e. cle ...

  • Technicolor - Thomson TG576 v7 - page 376

    hostmgr Commands 376 E-DOC-CTC-20071119-0014 v1.0 hostmgr add Add host device info to hostmgr SYNT AX: hostmgr add mac_addr = <hardware-address> [ip_addr = <ip-address]> [name = <string]> [type = <{generic_device|desktop_computer| laptop_computer|set_top_box|pda| gaming_console|phone|mobile_phone|printer| mass_storage_device}]& ...

  • Technicolor - Thomson TG576 v7 - page 377

    hostmgr Commands E-DOC-CTC-20071119-0014 v1.0 377 hostmgr clear Remove all hosts from list ...

  • Technicolor - Thomson TG576 v7 - page 378

    hostmgr Commands 378 E-DOC-CTC-20071119-0014 v1.0 hostmgr config Config hostmgr parameters SYNT AX: hostmgr config [state = <{disabled|enabled}]> [scantime = <number{10-600}]> [autosave = <{disabled|enabled}]> [trace = <{disabled|enabled}]> where: state Enable/disable hostmgr deamon OPTIONAL scantime T ime between two scans ...

  • Technicolor - Thomson TG576 v7 - page 379

    hostmgr Commands E-DOC-CTC-20071119-0014 v1.0 379 hostmgr delete Delete host device info from hostmgr SYNT AX: hostmgr delete mac_addr = <hardware-address> where: mac_addr Host MAC address REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 380

    hostmgr Commands 380 E-DOC-CTC-20071119-0014 v1.0 hostmgr flush Flushes hostmgr configuration (i.e. clean & to defaults) ...

  • Technicolor - Thomson TG576 v7 - page 381

    hostmgr Commands E-DOC-CTC-20071119-0014 v1.0 381 hostmgr list List all host devices SYNT AX: hostmgr list [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 382

    ids Commands 382 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 383

    ids Commands E-DOC-CTC-20071119-0014 v1.0 383 ids Commands ids clear Clear IDS statistics. see page 384 ids config Display/Modify IDS configuration. see page 385 ids parser list Display ids parser configuration. see page 386 ids parser modify Modify ids parser configuration. see page 387 ids pattern clear Reset pattern tracker . see page 388 ids pa ...

  • Technicolor - Thomson TG576 v7 - page 384

    ids Commands 384 E-DOC-CTC-20071119-0014 v1.0 ids clear Clear IDS statistics. ...

  • Technicolor - Thomson TG576 v7 - page 385

    ids Commands E-DOC-CTC-20071119-0014 v1.0 385 ids config Display/Modify IDS configuration. SYNT AX: ids config [state = <{disabled|enabled}]> where: state Enable/Disable ids checks. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 386

    ids Commands 386 E-DOC-CTC-20071119-0014 v1.0 ids parser list Display ids parser configuration. SYNT AX: ids parser list [parser = <parser]> where: parser The name of the parser . OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 387

    ids Commands E-DOC-CTC-20071119-0014 v1.0 387 ids parser modify Modify ids parser configuration. SYNT AX: ids parser modify [parser = <parser]> state = <{disabled|enabled}> where: parser The name of the parser . OPTIONAL state The state of the parser . REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 388

    ids Commands 388 E-DOC-CTC-20071119-0014 v1.0 ids pattern clear Reset pattern tracker . ...

  • Technicolor - Thomson TG576 v7 - page 389

    ids Commands E-DOC-CTC-20071119-0014 v1.0 389 ids pattern list Display patterns in pattern tracker . SYNT AX: ids pattern list [size = <{10|100|full} or number]> where: size Modify the size of pattern tracker list. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 390

    ids Commands 390 E-DOC-CTC-20071119-0014 v1.0 ids pattern stats Display pattern tracker statistics. ...

  • Technicolor - Thomson TG576 v7 - page 391

    ids Commands E-DOC-CTC-20071119-0014 v1.0 391 ids signature list Display ids signature configuration. SYNT AX: ids signature list [signature = <fragment_sweep|zero- length_fragment_size|small_fragment_size| ip_protocol_scan|tcp_port_scan| tcp_syn_scan|stealth_tcp_null_scan| stealth_tcp_fin_scan|stealth_tcp_xmas_scan| stealth_tcp_full_xmas_scan| ...

  • Technicolor - Thomson TG576 v7 - page 392

    ids Commands 392 E-DOC-CTC-20071119-0014 v1.0 ids signature modify Modify ids signature configuration. SYNT AX: ids signature modify [signature = <fragment_sweep|zero- length_fragment_size|small_fragment_size| ip_protocol_scan|tcp_port_scan| tcp_syn_scan|stealth_tcp_null_scan| stealth_tcp_fin_scan|stealth_tcp_xmas_scan| stealth_tcp_full_xmas_sca ...

  • Technicolor - Thomson TG576 v7 - page 393

    ids Commands E-DOC-CTC-20071119-0014 v1.0 393 ids threshold clear Reset IDS thresholds. ...

  • Technicolor - Thomson TG576 v7 - page 394

    ids Commands 394 E-DOC-CTC-20071119-0014 v1.0 ids threshold list Display IDS thresholds. ...

  • Technicolor - Thomson TG576 v7 - page 395

    ids Commands E-DOC-CTC-20071119-0014 v1.0 395 ids threshold modify Modify IDS threshold. SYNT AX: ids threshold modify index = <number> [window = <number]> [limit = <number]> [scaling = <{disabled|enabled}]> where: index The index of the threshold. REQUIRED window The time window of the threshold. OPTIONAL limit The limit of ...

  • Technicolor - Thomson TG576 v7 - page 396

    igmp Commands 396 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 397

    igmp Commands E-DOC-CTC-20071119-0014 v1.0 397 igmp Commands igmp host config Display/Modify global IGMP configuration. see page 398 igmp host debug clear Clear IGMP statistics. see page 399 igmp host debug stats Print IGMP statistics. see page 400 igmp host flush Flush the IGMP settings. see page 401 igmp host ifconfig Configure an IGMP interface. ...

  • Technicolor - Thomson TG576 v7 - page 398

    igmp Commands 398 E-DOC-CTC-20071119-0014 v1.0 igmp host config Display/Modify global IGMP configuration. SYNT AX: igmp host config [requirera = <{disabled|enabled}]> where: requirera Enable/Disable the router alert IP option check. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 399

    igmp Commands E-DOC-CTC-20071119-0014 v1.0 399 igmp host debug clear Clear IGMP statistics. ...

  • Technicolor - Thomson TG576 v7 - page 400

    igmp Commands 400 E-DOC-CTC-20071119-0014 v1.0 igmp host debug stats Print IGMP statistics. ...

  • Technicolor - Thomson TG576 v7 - page 401

    igmp Commands E-DOC-CTC-20071119-0014 v1.0 401 igmp host flush Flush the IGMP settings. ...

  • Technicolor - Thomson TG576 v7 - page 402

    igmp Commands 402 E-DOC-CTC-20071119-0014 v1.0 igmp host ifconfig Configure an IGMP interface. SYNT AX: igmp host ifconfig intf = <{loop|Internet|LocalNetwork}> version = <{none|IGMPv1|IGMPv2|IGMPv3}> where: intf The IP interface name. REQUIRED version The IGMP version of the IP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 403

    igmp Commands E-DOC-CTC-20071119-0014 v1.0 403 igmp host iflist Show the configuration of the IGMP interfaces. SYNT AX: igmp host iflist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 404

    igmp Commands 404 E-DOC-CTC-20071119-0014 v1.0 igmp host list Show the IGMP groups. SYNT AX: igmp host list [intf = <{loop|Internet|LocalNetwork}]> [expand = <{disabled|enabled}]> where: intf The IP interface name. OPTIONAL expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 405

    igmp Commands E-DOC-CTC-20071119-0014 v1.0 405 igmp proxy config Configure the IGMP proxy . SYNT AX: igmp proxy config [state = <{disabled|enabled}]> [qi = <number{1-86400}]> [qri = <number{1-86400}]> [lmqi = <number{1-86400}]> [rv = <number{2-10}]> [advinter = <number{4-180}]> [initadvinter = <number{1-4}]> ...

  • Technicolor - Thomson TG576 v7 - page 406

    igmp Commands 406 E-DOC-CTC-20071119-0014 v1.0 igmp proxy debug clear Clear IGMP proxy statistics ...

  • Technicolor - Thomson TG576 v7 - page 407

    igmp Commands E-DOC-CTC-20071119-0014 v1.0 407 igmp proxy debug stats Print IGMP proxy statistics ...

  • Technicolor - Thomson TG576 v7 - page 408

    igmp Commands 408 E-DOC-CTC-20071119-0014 v1.0 igmp proxy debug traceconfig Modify IGMP proxy trace configuration SYNT AX: igmp proxy debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 409

    igmp Commands E-DOC-CTC-20071119-0014 v1.0 409 igmp proxy flush Flush all IGMP proxy settings and learned groups ...

  • Technicolor - Thomson TG576 v7 - page 410

    igmp Commands 410 E-DOC-CTC-20071119-0014 v1.0 igmp proxy grouplist Show the learned groups on an IGMP proxy interface. SYNT AX: igmp proxy grouplist [intf = <{LocalNetwork}]> [expand = <{disabled|enabled}]> where: intf The name of the IGMP proxy interface to be listed. OPTIONAL expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 411

    igmp Commands E-DOC-CTC-20071119-0014 v1.0 411 igmp proxy ifconfig Configure an IGMP proxy interface. SYNT AX: igmp proxy ifconfig intf = <{LocalNetwork|Internet}> [state = <{inactive|downstream|upstream}]> [version = <{IGMPv1|IGMPv2|IGMPv3}]> [fastleave = <{disabled|enabled}]> [exptrack = <{disabled|enabled}]> [mrd = ...

  • Technicolor - Thomson TG576 v7 - page 412

    igmp Commands 412 E-DOC-CTC-20071119-0014 v1.0 igmp proxy iflist Show the configuration of an IGMP proxy interface. SYNT AX: igmp proxy iflist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 413

    igmp Commands E-DOC-CTC-20071119-0014 v1.0 413 igmp proxy mbslist Show the IGMP proxy membership database (merge of all learned groups). ...

  • Technicolor - Thomson TG576 v7 - page 414

    interface Command 414 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 415

    interface Command E-DOC-CTC-20071119-0014 v1.0 415 interface Command Display interfaces. SYNT AX: interface list [expand = <{disabled|enabled}]> [reverse = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL reverse Reverse listing (lower layer iso. upper layer). OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 416

    ip Commands 416 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 417

    ip Commands E-DOC-CTC-20071119-0014 v1.0 417 ip Commands ip arpadd Add an entry to the ARP cache of a broadcast IP interface. see page 419 ip arpdelete Delete an ARP entry . see page 420 ip arplist Display the ARP cache. see page 421 ip auto flush Flushes autoIP interfaces. see page 422 ip auto ifadd Creates a new autoIP interface. see page 423 ip ...

  • Technicolor - Thomson TG576 v7 - page 418

    ip Commands 418 E-DOC-CTC-20071119-0014 v1.0 ip ipadd Assign an IP address to an IP interface. see page 442 ip ipconfig Modify an IP address configuration. see page 443 ip ipdelete Remove an IP address from an IP interface. see page 444 ip iplist Display all configured IP addresses. see page 445 ip mcast flush Flush the multicast routing table. see ...

  • Technicolor - Thomson TG576 v7 - page 419

    ip Commands E-DOC-CTC-20071119-0014 v1.0 419 ip arpadd Add an entry to the ARP cache of a broadcast IP interface. SYNT AX: ip arpadd intf = <{LocalNetwork}> ip = <ip-range> [hwaddr = <hardware-address]> where: intf The IP interface name. REQUIRED ip The IP address [range] of the entry to add. REQUIRED hwaddr The hardware address ( ...

  • Technicolor - Thomson TG576 v7 - page 420

    ip Commands 420 E-DOC-CTC-20071119-0014 v1.0 ip arpdelete Delete an ARP entry . SYNT AX: ip arpdelete intf = <{LocalNetwork}> ip = <ip-range> [hwaddr = <hardware-address]> where: intf The IP interface name. REQUIRED ip The IP address [range] of the entry to delete. REQUIRED hwaddr The hardware address (e.g. Ethernet MAC address) o ...

  • Technicolor - Thomson TG576 v7 - page 421

    ip Commands E-DOC-CTC-20071119-0014 v1.0 421 ip arplist Display the ARP cache. ...

  • Technicolor - Thomson TG576 v7 - page 422

    ip Commands 422 E-DOC-CTC-20071119-0014 v1.0 ip auto flush Flushes autoIP interfaces. ...

  • Technicolor - Thomson TG576 v7 - page 423

    ip Commands E-DOC-CTC-20071119-0014 v1.0 423 ip auto ifadd Creates a new autoIP interface. SYNT AX: ip auto ifadd intf = <{loop|Internet|LocalNetwork}> [addr = <ip-address]> where: intf The name of the IP interface for which a link- local address has to be allocated. REQUIRED addr The preferred link-local IP address. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 424

    ip Commands 424 E-DOC-CTC-20071119-0014 v1.0 ip auto ifattach Select and assign a link-local address to an autoIP interface. SYNT AX: ip auto ifattach intf = <> where: intf The name of the autoIP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 425

    ip Commands E-DOC-CTC-20071119-0014 v1.0 425 ip auto ifconfig Configures an autoIP interface. SYNT AX: ip auto ifconfig intf = <> [addr = <ip-address]> [poolstart = <ip-address]> [poolend = <ip-address]> [netmask = <ip-mask(dotted or cidr)]> [claim = <number{0-65535}]> [defence = <number{0-65535}]> [probe = ...

  • Technicolor - Thomson TG576 v7 - page 426

    ip Commands 426 E-DOC-CTC-20071119-0014 v1.0 ip auto ifdelete Deletes an existing autoIP interface. SYNT AX: ip auto ifdelete intf = <> where: intf The name of the autoIP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 427

    ip Commands E-DOC-CTC-20071119-0014 v1.0 427 ip auto ifdetach Release the link-local address for the given autoIP interface. SYNT AX: ip auto ifdetach intf = <> where: intf The name of the autoIP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 428

    ip Commands 428 E-DOC-CTC-20071119-0014 v1.0 ip auto iflist Shows the autoIP interfaces. SYNT AX: ip auto iflist [intf = <]> where: intf The name of a autoIP interface. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 429

    ip Commands E-DOC-CTC-20071119-0014 v1.0 429 ip config Display/Modify global IP stack configuration. SYNT AX: ip config [forwarding = <{disabled|enabled}]> [redirects = <{disabled|enabled}]> [checkoptions = <{disabled|enabled| transparent}]> [netbroadcasts = <{disabled|enabled}]> [ttl = <number{0-255}]> [fraglimit = &l ...

  • Technicolor - Thomson TG576 v7 - page 430

    ip Commands 430 E-DOC-CTC-20071119-0014 v1.0 ip debug httpprobe Send HTTP probe to measure the round trip time taken to connect and access SYNT AX: ip debug httpprobe url = <string> [version = <{1.0|1.1}]> where: url The Uniform Resource location identifying the HTTP server . REQUIRED version The version of the HTTP Server . OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 431

    ip Commands E-DOC-CTC-20071119-0014 v1.0 431 ip debug sendto Send UDP packets. SYNT AX: ip debug sendto addr = <ip-address> [count = <number{1-1000000}]> [size = <number{0-20000}]> [interval = <number{1-1000000}]> [listen = <{disabled|enabled}]> [dffield = <{disabled|enabled}]> [srcaddr = <ip-address]> [src ...

  • Technicolor - Thomson TG576 v7 - page 432

    ip Commands 432 E-DOC-CTC-20071119-0014 v1.0 ip debug stats Display statistics. SYNT AX: ip debug stats proto = <{ip|udp|tcp|icmp}> where: proto The protocol for which to display the statistics. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 433

    ip Commands E-DOC-CTC-20071119-0014 v1.0 433 ip debug traceconfig Display/Modify IP stack trace configuration. SYNT AX: ip debug traceconfig [input = <{none|label|-telnet|-host|- broadcast|all}]> [forward = <{none|label|-telnet|-host|- broadcast|all}]> [output = <{none|label|-telnet|-host|- broadcast|all}]> [drop = <{none|label ...

  • Technicolor - Thomson TG576 v7 - page 434

    ip Commands 434 E-DOC-CTC-20071119-0014 v1.0 ip flush Flush all static IP parameters. Dynamic info (e.g. from PPP links) remains. ...

  • Technicolor - Thomson TG576 v7 - page 435

    ip Commands E-DOC-CTC-20071119-0014 v1.0 435 ip ifadd Create an IP interface. SYNT AX: ip ifadd intf = <string> dest = <{ethoa_8_35}> where: intf An IP interface name. REQUIRED dest An network interface name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 436

    ip Commands 436 E-DOC-CTC-20071119-0014 v1.0 ip ifattach Attach an IP interface. SYNT AX: ip ifattach intf = <{}> where: intf An IP interface name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 437

    ip Commands E-DOC-CTC-20071119-0014 v1.0 437 ip ifconfig Modify an IP interface configuration. SYNT AX: ip ifconfig intf = <{loop|Internet|LocalNetwork}> [mtu = <number{68-65535}]> [status = <{down|up}]> [hwaddr = <hardware-address]> [group = <{wan|local|lan|tunnel|dmz|guest} or number]> [linksensing = <{disabled|en ...

  • Technicolor - Thomson TG576 v7 - page 438

    ip Commands 438 E-DOC-CTC-20071119-0014 v1.0 ip ifdelete Delete an IP interface. SYNT AX: ip ifdelete intf = <{LocalNetwork}> where: intf An IP interface name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 439

    ip Commands E-DOC-CTC-20071119-0014 v1.0 439 ip ifdetach Detach an IP interface. SYNT AX: ip ifdetach intf = <{loop|LocalNetwork}> where: intf An IP interface name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 440

    ip Commands 440 E-DOC-CTC-20071119-0014 v1.0 ip iflist Display all IP interfaces. SYNT AX: ip iflist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 441

    ip Commands E-DOC-CTC-20071119-0014 v1.0 441 ip ifwait W ait for a status change of an IP interface. SYNT AX: ip ifwait intf = <{loop|Internet|LocalNetwork}> [timeout = <number{1-600000}]> [adminstatus = <{down|up}]> [operstatus = <{down|up}]> [linkstatus = <{down|up}]> where: intf An IP interface name. REQUIRED timeou ...

  • Technicolor - Thomson TG576 v7 - page 442

    ip Commands 442 E-DOC-CTC-20071119-0014 v1.0 ip ipadd Assign an IP address to an IP interface. SYNT AX: ip ipadd intf = <{loop|Internet|LocalNetwork}> addr = <ip-address> [netmask = <ip-mask(dotted or cidr)]> [pointopoint = <ip-address]> [addroute = <{disabled|enabled}]> where: intf The IP interface name. REQUIRED addr ...

  • Technicolor - Thomson TG576 v7 - page 443

    ip Commands E-DOC-CTC-20071119-0014 v1.0 443 ip ipconfig Modify an IP address configuration. SYNT AX: ip ipconfig addr = <ip-address> [preferred = <{disabled|enabled}]> [primary = <{disabled|enabled}]> where: addr The IP address to configure. REQUIRED preferred Make IP address the preferred address for that subnet. OPTIONAL primar ...

  • Technicolor - Thomson TG576 v7 - page 444

    ip Commands 444 E-DOC-CTC-20071119-0014 v1.0 ip ipdelete Remove an IP address from an IP interface. SYNT AX: ip ipdelete addr = <ip-address> where: addr The IP address to delete. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 445

    ip Commands E-DOC-CTC-20071119-0014 v1.0 445 ip iplist Display all configured IP addresses. ...

  • Technicolor - Thomson TG576 v7 - page 446

    ip Commands 446 E-DOC-CTC-20071119-0014 v1.0 ip mcast flush Flush the multicast routing table. ...

  • Technicolor - Thomson TG576 v7 - page 447

    ip Commands E-DOC-CTC-20071119-0014 v1.0 447 ip mcast rtadd Add a multicast route to the multicast routing table. SYNT AX: ip mcast rtadd srcintf = <{loop|Internet|LocalNetwork}> [src = <ip-address]> grp = <ip-address> dstintf = <{loop|Internet|LocalNetwork}> [ttl = <number{1-255}]> [ttlincr = <{disabled|enabled}]&g ...

  • Technicolor - Thomson TG576 v7 - page 448

    ip Commands 448 E-DOC-CTC-20071119-0014 v1.0 ip mcast rtdelete Delete a multicast route from the multicast routing table. SYNT AX: ip mcast rtdelete srcintf = <{loop|Internet|LocalNetwork}> [src = <ip-address]> grp = <ip-address> dstintf = <{loop|Internet|LocalNetwork}> where: srcintf The source IP interface. REQUIRED src Th ...

  • Technicolor - Thomson TG576 v7 - page 449

    ip Commands E-DOC-CTC-20071119-0014 v1.0 449 ip mcast rtlist Display the multicast routing table. SYNT AX: ip mcast rtlist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 450

    ip Commands 450 E-DOC-CTC-20071119-0014 v1.0 ip rtadd Add a route to the routing table. SYNT AX: ip rtadd dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [label = <{None|DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [gateway = <ip-address]> [intf = <{loop|Internet|LocalNetwork}]> [srcintf = ...

  • Technicolor - Thomson TG576 v7 - page 451

    ip Commands E-DOC-CTC-20071119-0014 v1.0 451 ip rtdelete Delete a route from the routing table. SYNT AX: ip rtdelete dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [label = <{None|DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [gateway = <ip-address]> [intf = <{loop|Internet|LocalNetwork}]> ...

  • Technicolor - Thomson TG576 v7 - page 452

    ip Commands 452 E-DOC-CTC-20071119-0014 v1.0 ip rtlist Display the routing table. SYNT AX: ip rtlist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 453

    ipqos Commands E-DOC-CTC-20071119-0014 v1.0 453 ipqos Commands ipqos config Modify the IP QoS configuration for a given destination of an interface. see page 454 ipqos ef config Modify an IP QoS EF timer configuration for an interface. see page 455 ipqos ef list Display the IP QoS EF timers. see page 456 ipqos ef stats Display the IP QoS EF timer s ...

  • Technicolor - Thomson TG576 v7 - page 454

    ipqos Commands 454 E-DOC-CTC-20071119-0014 v1.0 ipqos config Modify the IP QoS configuration for a given destination of an interface. SYNT AX: ipqos config dest = <{atm_pvc_8_35}> [state = <{disabled|enabled}]> [discard = <{tail|early}]> [priority = <{wfq|strict|wrr}]> [realtimerate = <number{1-100}]> [burstsize = < ...

  • Technicolor - Thomson TG576 v7 - page 455

    ipqos Commands E-DOC-CTC-20071119-0014 v1.0 455 ipqos ef config Modify an IP QoS EF timer configuration for an interface. SYNT AX: ipqos ef config intf = <{loop|Internet|LocalNetwork}> [state = <{disabled|enabled}]> [timeout = <number{100-10000}]> [mtu = <number{68-65535}]> where: intf The IP interface name. REQUIRED state E ...

  • Technicolor - Thomson TG576 v7 - page 456

    ipqos Commands 456 E-DOC-CTC-20071119-0014 v1.0 ipqos ef list Display the IP QoS EF timers. ...

  • Technicolor - Thomson TG576 v7 - page 457

    ipqos Commands E-DOC-CTC-20071119-0014 v1.0 457 ipqos ef stats Display the IP QoS EF timer statistics. ...

  • Technicolor - Thomson TG576 v7 - page 458

    ipqos Commands 458 E-DOC-CTC-20071119-0014 v1.0 ipqos list Display the IP QoS configuration. ...

  • Technicolor - Thomson TG576 v7 - page 459

    ipqos Commands E-DOC-CTC-20071119-0014 v1.0 459 ipqos queue clear Clear the IP QoS statistics. ...

  • Technicolor - Thomson TG576 v7 - page 460

    ipqos Commands 460 E-DOC-CTC-20071119-0014 v1.0 ipqos queue config Modify the IP QoS subqueue configuration. SYNT AX: ipqos queue config dest = <{atm_pvc_8_35}> queue = <number{0-5}> [propagate = <{disabled|enabled}]> [ecnmarking = <{disabled|enabled}]> [ackfiltering = <{disabled|enabled}]> [maxpackets = <number{0-2 ...

  • Technicolor - Thomson TG576 v7 - page 461

    ipqos Commands E-DOC-CTC-20071119-0014 v1.0 461 ipqos queue list Display the IP QoS subqueue configuration. SYNT AX: ipqos queue list [dest = <{atm_pvc_8_35}]> where: dest The destination of the interface. T ypically , a phonebook entry . OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 462

    ipqos Commands 462 E-DOC-CTC-20071119-0014 v1.0 ipqos queue stats Display the IP QoS subqueue statistics. SYNT AX: ipqos queue stats [dest = <{atm_pvc_8_35}]> where: dest The destination of the interface. T ypically , a phonebook entry . OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 463

    label Commands E-DOC-CTC-20071119-0014 v1.0 463 label Commands label add Add a label. see page 464 label chain add Add a chain. see page 465 label chain delete Delete a chain. see page 466 label chain flush Flush all chains. see page 467 label chain list Display a list of chains. see page 468 label delete Delete a label. see page 469 label flush Fl ...

  • Technicolor - Thomson TG576 v7 - page 464

    label Commands 464 E-DOC-CTC-20071119-0014 v1.0 label add Add a label. SYNT AX: label add name = <string> where: name The name of a label to add. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 465

    label Commands E-DOC-CTC-20071119-0014 v1.0 465 label chain add Add a chain. SYNT AX: label chain add chain = <string> where: chain The name of the chain to add. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 466

    label Commands 466 E-DOC-CTC-20071119-0014 v1.0 label chain delete Delete a chain. SYNT AX: label chain delete chain = <chain name> where: chain The name of the chain to delete. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 467

    label Commands E-DOC-CTC-20071119-0014 v1.0 467 label chain flush Flush all chains. ...

  • Technicolor - Thomson TG576 v7 - page 468

    label Commands 468 E-DOC-CTC-20071119-0014 v1.0 label chain list Display a list of chains. SYNT AX: label chain list [format = <{pretty|cli}]> where: format The format of the chain list. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 469

    label Commands E-DOC-CTC-20071119-0014 v1.0 469 label delete Delete a label. SYNT AX: label delete name = <{DSCP|Interactive|Management|Video| VoIP-RTP|VoIP-Signal|default}> where: name The name of a label. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 470

    label Commands 470 E-DOC-CTC-20071119-0014 v1.0 label flush Flush all label. ...

  • Technicolor - Thomson TG576 v7 - page 471

    label Commands E-DOC-CTC-20071119-0014 v1.0 471 label list Display the labels. SYNT AX: label list [name = <{DSCP|Interactive|Management|Video| VoIP-RTP|VoIP-Signal|default}]> where: name The name of a label. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 472

    label Commands 472 E-DOC-CTC-20071119-0014 v1.0 label modify Modify a label configuration. SYNT AX: label modify name = <{DSCP|Interactive|Management|Video| VoIP-RTP|VoIP-Signal|default}> [classification = <{ignore|overwrite| increase}]> [defclass = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13| 14|15|dscp|default}]> [ackclass = <{0|1|2|3| ...

  • Technicolor - Thomson TG576 v7 - page 473

    label Commands E-DOC-CTC-20071119-0014 v1.0 473 label rule add Add a rule. SYNT AX: label rule add chain = <chain name> [index = <number]> [name = <string]> [clink = <chain name]> [srcintf [!] = <{wan|local|lan|tunnel|dmz| guest}]> [srcip [!] = <{private|ssdp_ip|mdap_ip}]> [dstip [!] = <{private|ssdp_ip|mdap_i ...

  • Technicolor - Thomson TG576 v7 - page 474

    label Commands 474 E-DOC-CTC-20071119-0014 v1.0 label rule delete Delete a rule. SYNT AX: label rule delete chain = <chain name> index = <number> where: chain The name of the chain in which to delete the rule. REQUIRED index The number of the rule in the chain. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 475

    label Commands E-DOC-CTC-20071119-0014 v1.0 475 label rule flush Flush all rules. SYNT AX: label rule flush [chain = <chain name]> where: chain The name of the chain to flush. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 476

    label Commands 476 E-DOC-CTC-20071119-0014 v1.0 label rule list Display a list of rules. SYNT AX: label rule list [chain = <chain name]> [format = <{pretty|cli}]> where: chain The name of the chain to list the rules of. OPTIONAL format The format of the rule list. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 477

    label Commands E-DOC-CTC-20071119-0014 v1.0 477 label rule modify Modify a rule. SYNT AX: label rule modify chain = <chain name> [index = <number]> [newindex = <number]> [name = <string]> [clink = <chain name]> [[!]srcintf] = <chain name]> [[!]srcip] = <chain name]> [[!]dstip] = <chain name]> [[!]serv ...

  • Technicolor - Thomson TG576 v7 - page 478

    language Commands 478 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 479

    language Commands E-DOC-CTC-20071119-0014 v1.0 479 language Commands language config Select a language. see page 480 language delete Delete one or all language archives. see page 481 language list List available languages archives. see page 482 ...

  • Technicolor - Thomson TG576 v7 - page 480

    language Commands 480 E-DOC-CTC-20071119-0014 v1.0 language config Select a language. SYNT AX: language config [language = <string]> [complete = <{yes|no}]> where: language Language code : OSI language code (2 chars) for language (en=English) OPTIONAL complete Enable translation for expert pages. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 481

    language Commands E-DOC-CTC-20071119-0014 v1.0 481 language delete Delete one or all language archives. SYNT AX: language delete [file = <string]> [all = <{yes|no}]> where: file Filename : name of language archive to delete OPTIONAL all Deletes all languages archives. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 482

    language Commands 482 E-DOC-CTC-20071119-0014 v1.0 language list List available languages archives. ...

  • Technicolor - Thomson TG576 v7 - page 483

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 483 mbus Commands mbus client authenticate Authenticate a session see page 484 mbus client config Modify client parameters see page 485 mbus client exec Execute mbus command see page 486 mbus client register Register cli client to mbus see page 488 mbus client termsession T erminate a session see page 489 ...

  • Technicolor - Thomson TG576 v7 - page 484

    mbus Commands 484 E-DOC-CTC-20071119-0014 v1.0 mbus client authenticate Authenticate a session SYNT AX: mbus client authenticate type = <{cleartext|md5|crypt|digest}> username = <quoted string> password = <password> where: type Authentication type REQUIRED username User name REQUIRED password password REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 485

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 485 mbus client config Modify client parameters SYNT AX: mbus client config [writelock = <{enabled|disabled}]> [wlgetimeout = <number]> [wlidletimeout = <number]> [path = <quoted string]> [type = <{indexpath|objidpath|keystrpath}]> [id = <number]> where: writelock Get/re ...

  • Technicolor - Thomson TG576 v7 - page 486

    mbus Commands 486 E-DOC-CTC-20071119-0014 v1.0 mbus client exec Execute mbus command SYNT AX: mbus client exec cmd = <{getpath|getcount|getnames|getvalues| setvalue|addobject|deleteobject|subscribe| unsubscribe|getaccessrights|setaccessrights}> [param = <quoted string]> [value = <quoted string]> [gettype = <{parameter|path|obje ...

  • Technicolor - Thomson TG576 v7 - page 487

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 487 =, <, <=, >, >=, and, or , not. The left operand is a parameter name. The right operand is a parameter value. For boolean operators the operands are filters. Example: '(== Name eth0)'. path Fully qualified mbus path OPTIONAL flags Client command data flags OPTIONAL accesslist Comm ...

  • Technicolor - Thomson TG576 v7 - page 488

    mbus Commands 488 E-DOC-CTC-20071119-0014 v1.0 mbus client register Register cli client to mbus SYNT AX: mbus client register [dmtree = <{igd|atomic|system}]> [type = <{indexpath|objidpath|keystrpath}]> [dlink = <{local_ipc|remote_inet}]> [mbusd_addr = <quoted string]> [refresolv = <{disabled|enabled}]> where: dmtree S ...

  • Technicolor - Thomson TG576 v7 - page 489

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 489 mbus client termsession T erminate a session SYNT AX: mbus client termsession id = <number> where: id id of session to terminate REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 490

    mbus Commands 490 E-DOC-CTC-20071119-0014 v1.0 mbus client unregister Unregister cli client from mbus ...

  • Technicolor - Thomson TG576 v7 - page 491

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 491 mbus debug clearstats Reset mbus statistics. ...

  • Technicolor - Thomson TG576 v7 - page 492

    mbus Commands 492 E-DOC-CTC-20071119-0014 v1.0 mbus debug loadobjects Load/sync object instances from plugins SYNT AX: mbus debug loadobjects [dmtree = <{igd|atomic|system}]> [path = <quoted string]> [type = <{indexpath|objidpath|keystrpath}]> [flush = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 493

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 493 mbus debug stats Display mbus statistics. ...

  • Technicolor - Thomson TG576 v7 - page 494

    mbus Commands 494 E-DOC-CTC-20071119-0014 v1.0 mbus debug traceconfig Modify mbus trace settings. SYNT AX: mbus debug traceconfig [level = <number{0-4}]> where: level Select mbus trace level (0-4). OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 495

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 495 mbus debug unloadobjects Unload object instances SYNT AX: mbus debug unloadobjects [dmtree = <{igd|atomic|system}]> [path = <quoted string]> [type = <{indexpath|objidpath|keystrpath}]> [flush = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL path Fully ...

  • Technicolor - Thomson TG576 v7 - page 496

    mbus Commands 496 E-DOC-CTC-20071119-0014 v1.0 mbus listcontexts Display the context instances SYNT AX: mbus listcontexts [dmtree = <{igd|atomic|system}]> [expand = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL expand Details enabled/disabled OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 497

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 497 mbus listenums Display the registered enumtypes SYNT AX: mbus listenums [dmtree = <{igd|atomic|system}]> [name = <quoted string]> [expand = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL name Filter enumtypes by (part of) the name OPTIONAL expand Details ena ...

  • Technicolor - Thomson TG576 v7 - page 498

    mbus Commands 498 E-DOC-CTC-20071119-0014 v1.0 mbus listobjects Display the object instances SYNT AX: mbus listobjects [dmtree = <{igd|atomic|system}]> [path = <quoted string]> [type = <{indexpath|objidpath|keystrpath}]> [output = <{tree|list}]> [showflags = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tr ...

  • Technicolor - Thomson TG576 v7 - page 499

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 499 mbus listsubscriptions Display the subscription instances SYNT AX: mbus listsubscriptions [dmtree = <{igd|atomic|system}]> where: dmtree Select mbusd datamodel tree. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 500

    mbus Commands 500 E-DOC-CTC-20071119-0014 v1.0 mbus listtypes Display the registered objecttypes SYNT AX: mbus listtypes [dmtree = <{igd|atomic|system}]> [path = <quoted string]> [expand = <{disabled|enabled}]> where: dmtree Select mbusd datamodel tree. OPTIONAL path Fully qualified mbus path to list. OPTIONAL expand Details enabl ...

  • Technicolor - Thomson TG576 v7 - page 501

    mbus Commands E-DOC-CTC-20071119-0014 v1.0 501 mbus pluginevent Simulate event from plugin SYNT AX: mbus pluginevent ctxid = <number{0--2}> type = <{addobj|delobj|updobj}> path = <quoted string> [name = <quoted string]> [value = <quoted string]> [orivalue = <quoted string]> where: ctxid Plugin context id REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 502

    mbus Commands 502 E-DOC-CTC-20071119-0014 v1.0 mbus unregister Unregister a client/plugin context SYNT AX: mbus unregister id = <number> where: id Select message-based client/plugin context id. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 503

    memm Commands E-DOC-CTC-20071119-0014 v1.0 503 memm Commands memm debug clearstats Clear time statistics. see page 504 memm debug lock stats Display lock statistics. see page 505 memm debug lock traceconfig Modify lock trace settings. see page 506 memm debug stats Display memm time statistics. see page 507 memm debug tag (Un)tag memory manager obje ...

  • Technicolor - Thomson TG576 v7 - page 504

    memm Commands 504 E-DOC-CTC-20071119-0014 v1.0 memm debug clearstats Clear time statistics. ...

  • Technicolor - Thomson TG576 v7 - page 505

    memm Commands E-DOC-CTC-20071119-0014 v1.0 505 memm debug lock stats Display lock statistics. ...

  • Technicolor - Thomson TG576 v7 - page 506

    memm Commands 506 E-DOC-CTC-20071119-0014 v1.0 memm debug lock traceconfig Modify lock trace settings. SYNT AX: memm debug lock traceconfig [level = <number{0-4}]> [name = <string]> where: level Select memm trace level (0-4). OPTIONAL name application name filter for lock traces (empty displays all lock traces) OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 507

    memm Commands E-DOC-CTC-20071119-0014 v1.0 507 memm debug stats Display memm time statistics. SYNT AX: memm debug stats [name = <quoted string]> where: name Select typename(s) to list (supports partial typename) OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 508

    memm Commands 508 E-DOC-CTC-20071119-0014 v1.0 memm debug tag (Un)tag memory manager objects. SYNT AX: memm debug tag [name = <quoted string]> [tag = <{enabled|disabled}]> where: name Select typename(s) to list (supports partial typename) OPTIONAL tag Set (or unset) the tag OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 509

    memm Commands E-DOC-CTC-20071119-0014 v1.0 509 memm debug traceconfig Modify memm trace settings. SYNT AX: memm debug traceconfig [level = <number{0-4}]> where: level Select memm trace level (0-4). OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 510

    memm Commands 510 E-DOC-CTC-20071119-0014 v1.0 memm listobjects Display objects. SYNT AX: memm listobjects [name = <quoted string]> [tagged = <{no|yes}]> [hidedeldynstr = <{no|yes}]> where: name Select typename(s) to list (supports partial typename) OPTIONAL tagged Show only tagged (yes) or untagged (no) objects OPTIONAL hidedeldy ...

  • Technicolor - Thomson TG576 v7 - page 511

    memm Commands E-DOC-CTC-20071119-0014 v1.0 511 memm stats Display memm statistics. SYNT AX: memm stats [name = <quoted string]> where: name Select typename(s) to list (supports partial typename) OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 512

    menu Command 512 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 513

    menu Command E-DOC-CTC-20071119-0014 v1.0 513 menu Command Displays menu ...

  • Technicolor - Thomson TG576 v7 - page 514

    mlp Commands 514 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 515

    mlp Commands E-DOC-CTC-20071119-0014 v1.0 515 mlp Commands mlp debug export Export all scores. see page 516 mlp debug stats Display mlp statisctics. see page 517 mlp debug traceconfig Modify mlp trace settings. see page 518 mlp flush Flush all mlp structures. see page 519 mlp import Import all scores. see page 520 mlp privilege add Add a privilege. ...

  • Technicolor - Thomson TG576 v7 - page 516

    mlp Commands 516 E-DOC-CTC-20071119-0014 v1.0 mlp debug export Export all scores. ...

  • Technicolor - Thomson TG576 v7 - page 517

    mlp Commands E-DOC-CTC-20071119-0014 v1.0 517 mlp debug stats Display mlp statisctics. ...

  • Technicolor - Thomson TG576 v7 - page 518

    mlp Commands 518 E-DOC-CTC-20071119-0014 v1.0 mlp debug traceconfig Modify mlp trace settings. SYNT AX: mlp debug traceconfig [trace = <{disabled|enabled|full}]> where: trace Select mlp trace level. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 519

    mlp Commands E-DOC-CTC-20071119-0014 v1.0 519 mlp flush Flush all mlp structures. ...

  • Technicolor - Thomson TG576 v7 - page 520

    mlp Commands 520 E-DOC-CTC-20071119-0014 v1.0 mlp import Import all scores. SYNT AX: mlp import [trace = <{disabled|enabled|full}]> where: trace Select import trace level. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 521

    mlp Commands E-DOC-CTC-20071119-0014 v1.0 521 mlp privilege add Add a privilege. SYNT AX: mlp privilege add name = <string> type = <{access|service}> [descr = <quoted string]> where: name Privilege name. REQUIRED type Privilege type. REQUIRED descr Privilege description. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 522

    mlp Commands 522 E-DOC-CTC-20071119-0014 v1.0 mlp privilege addzone Add a zone to a privilege. SYNT AX: mlp privilege addzone name = <> zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/ Local|r_lan|r_wan|r_fs_view|r_certificates| r_remote_mgnt|r_local|r_qos|w_lan|w_wan| w_fs_passive|w_rtg|w_fwdg|w_nat|w_frwl_norm| w_frwl_adv|w_frwl_ss|w_ipsec|w_c ...

  • Technicolor - Thomson TG576 v7 - page 523

    mlp Commands E-DOC-CTC-20071119-0014 v1.0 523 mlp privilege config Modify the privilege. SYNT AX: mlp privilege config name = <> [descr = <quoted string]> [score = <{hex-word}[:{hex-word}] ex: 'a12:c30f']> where: name Select the privilege by name. REQUIRED descr Set the description. OPTIONAL score Set the score. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 524

    mlp Commands 524 E-DOC-CTC-20071119-0014 v1.0 mlp privilege delete Delete a privilege. SYNT AX: mlp privilege delete name = <> where: name Privilege name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 525

    mlp Commands E-DOC-CTC-20071119-0014 v1.0 525 mlp privilege list Display the privileges. SYNT AX: mlp privilege list [name = <]> [type = <{access|service}]> [verbose = <{minimal|medium|all}]> where: name Privilege name. OPTIONAL type Privilege type. OPTIONAL verbose Limit the output list. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 526

    mlp Commands 526 E-DOC-CTC-20071119-0014 v1.0 mlp privilege removezone Remove a zone from a privilege. SYNT AX: mlp privilege removezone name = <> zone = <{Read/LAN/WAN/Local|Write/LAN/WAN/ Local|r_lan|r_wan|r_fs_view|r_certificates| r_remote_mgnt|r_local|r_qos|w_lan|w_wan| w_fs_passive|w_rtg|w_fwdg|w_nat|w_frwl_norm| w_frwl_adv|w_frwl_ss| ...

  • Technicolor - Thomson TG576 v7 - page 527

    mlp Commands E-DOC-CTC-20071119-0014 v1.0 527 mlp role add Add a role. SYNT AX: mlp role add name = <string> parent = <> [descr = <quoted string]> where: name Role name. REQUIRED parent Parent role name. REQUIRED descr Role description. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 528

    mlp Commands 528 E-DOC-CTC-20071119-0014 v1.0 mlp role addpriv Add a privilege. SYNT AX: mlp role addpriv name = <{Administrator|LAN_Admin|PowerUser| root|SuperUser|TechnicalSupport|User| WAN_Admin}> access = <{anyaccess|AP1|AP2|AP3|AP4|AP5|AP6| AP7|AP8|AP9}> service = <{anyservice|SP1|SP10|SP11|SP12| SP13|SP14|SP15|SP16|SP17|SP18|SP ...

  • Technicolor - Thomson TG576 v7 - page 529

    mlp Commands E-DOC-CTC-20071119-0014 v1.0 529 mlp role config Modify the role. SYNT AX: mlp role config name = <> [parent = <]> [descr = <quoted string]> where: name Role name. REQUIRED parent Parent role name. OPTIONAL descr Role description. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 530

    mlp Commands 530 E-DOC-CTC-20071119-0014 v1.0 mlp role delete Delete a role. SYNT AX: mlp role delete name = <> where: name Role name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 531

    mlp Commands E-DOC-CTC-20071119-0014 v1.0 531 mlp role list Display the roles. SYNT AX: mlp role list [name = <]> [verbose = <{minimal|medium|all}]> where: name Role name. OPTIONAL verbose Limit the output list. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 532

    mlp Commands 532 E-DOC-CTC-20071119-0014 v1.0 mlp role removepriv Remove a privilege. SYNT AX: mlp role removepriv name = <> access = <> [service = <]> where: name Role name. REQUIRED access Access privilege to delete. REQUIRED service Privilege name to delete. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 533

    nat Commands E-DOC-CTC-20071119-0014 v1.0 533 nat Commands nat config Modify global NA T configuration. see page 534 nat flush Flush current NA T configuration. see page 535 nat ifconfig Modify address translation on an IP interface. see page 536 nat iflist Display all interfaces. see page 537 nat mapadd Add an address mapping to a nat enabled inte ...

  • Technicolor - Thomson TG576 v7 - page 534

    nat Commands 534 E-DOC-CTC-20071119-0014 v1.0 nat config Modify global NA T configuration. SYNT AX: nat config [trace = <{disabled|enabled}]> where: trace Enable/disable traces. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 535

    nat Commands E-DOC-CTC-20071119-0014 v1.0 535 nat flush Flush current NA T configuration. ...

  • Technicolor - Thomson TG576 v7 - page 536

    nat Commands 536 E-DOC-CTC-20071119-0014 v1.0 nat ifconfig Modify address translation on an IP interface. SYNT AX: nat ifconfig intf = <{loop|Internet|LocalNetwork}> translation = <{disabled|enabled|transparent}> where: intf The IP interface name. REQUIRED translation Disabled, enabled or tranparent address translation. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 537

    nat Commands E-DOC-CTC-20071119-0014 v1.0 537 nat iflist Display all interfaces. ...

  • Technicolor - Thomson TG576 v7 - page 538

    nat Commands 538 E-DOC-CTC-20071119-0014 v1.0 nat mapadd Add an address mapping to a nat enabled interface. SYNT AX: nat mapadd intf = <{loop|Internet|LocalNetwork}> [type = <{napt|nat}]> [outside_addr = <ip-range]> [inside_addr = <ip-range]> [access_list = <ip-range]> [foreign_addr = <ip-range]> [protocol = < ...

  • Technicolor - Thomson TG576 v7 - page 539

    nat Commands E-DOC-CTC-20071119-0014 v1.0 539 nat mapdelete Delete an address mapping from a nat enabled interface. SYNT AX: nat mapdelete intf = <{loop|Internet|LocalNetwork}> index = <number> where: intf The IP interface name. REQUIRED index The map index as listed by ':nat maplist'. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 540

    nat Commands 540 E-DOC-CTC-20071119-0014 v1.0 nat maplist Display address mappings. SYNT AX: nat maplist [intf = <{loop|Internet|LocalNetwork}]> [expand = <{disabled|enabled}]> where: intf The IP interface name. OPTIONAL expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 541

    nat Commands E-DOC-CTC-20071119-0014 v1.0 541 nat tmpladd Add an address mapping template. SYNT AX: nat tmpladd [intf = <{loop|Internet|LocalNetwork}]> [group = <{wan|local|lan|tunnel|dmz|guest} or number]> [timeout = <number{0-65535}]> [type = <{napt|nat}]> outside_addr = <ip-range> [inside_addr = <ip-range]> [a ...

  • Technicolor - Thomson TG576 v7 - page 542

    nat Commands 542 E-DOC-CTC-20071119-0014 v1.0 weight The weight to be used for the template instance(s). OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 543

    nat Commands E-DOC-CTC-20071119-0014 v1.0 543 nat tmpldelete Delete an address mapping template. SYNT AX: nat tmpldelete index = <number> where: index The template index as listed by ':nat tmpllist'. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 544

    nat Commands 544 E-DOC-CTC-20071119-0014 v1.0 nat tmplinst Instantiate address mapping templates for a given dynamic address. SYNT AX: nat tmplinst intf = <{loop|Internet|LocalNetwork}> addr_index = <ip-address> dynamic_addr = <ip-address> where: intf The IP interface name. REQUIRED addr_index The outside IP address index/key to i ...

  • Technicolor - Thomson TG576 v7 - page 545

    nat Commands E-DOC-CTC-20071119-0014 v1.0 545 nat tmpllist Display address mapping templates. SYNT AX: nat tmpllist [expand = <{disabled|enabled}]> where: expand Expanded listing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 546

    ping Command 546 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 547

    ping Command E-DOC-CTC-20071119-0014 v1.0 547 ping Command Send ICMP ECHO_REQUEST packets. SYNT AX: ping proto = <{ip|atm}> addr = <ip-address> dest = <{atm_pvc_8_35}> [count = <number{0-1000000}]> [size = <number{28-20028}]> [interval(ms) = <number{100-1000000}]> [DF-bit = <{disabled|enabled}]> [srcaddr = ...

  • Technicolor - Thomson TG576 v7 - page 548

    ppp Commands 548 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 549

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 549 ppp Commands ppp flush Flush all PPP interfaces. see page 550 ppp ifadd Create a new PPP interface. see page 551 ppp ifattach Attach a PPP interface. see page 552 ppp ifconfig Modify a PPP interface. see page 553 ppp ifdelete Delete a PPP interface. see page 556 ppp ifdetach Detach a PPP interface. see ...

  • Technicolor - Thomson TG576 v7 - page 550

    ppp Commands 550 E-DOC-CTC-20071119-0014 v1.0 ppp flush Flush all PPP interfaces. ...

  • Technicolor - Thomson TG576 v7 - page 551

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 551 ppp ifadd Create a new PPP interface. SYNT AX: ppp ifadd intf = <string> where: intf The name for the new PPP interface. If not specified, the destination will double as interface name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 552

    ppp Commands 552 E-DOC-CTC-20071119-0014 v1.0 ppp ifattach Attach a PPP interface. SYNT AX: ppp ifattach intf = <{Internet}> where: intf The name of the PPP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 553

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 553 ppp ifconfig Modify a PPP interface. SYNT AX: ppp ifconfig intf = <{Internet}> [dest = <{RELAY}]> [user = <string]> [password = <password]> [acname = <quoted string]> [servicename = <quoted string]> [pool = <{none}]> [pcomp = <{disabled|enabled}]> [accomp ...

  • Technicolor - Thomson TG576 v7 - page 554

    ppp Commands 554 E-DOC-CTC-20071119-0014 v1.0 servicename The service name for a PPP session. OPTIONAL pool Acquire IP subnet and assign it to a free DHCP pool. OPTIONAL pcomp T ry to negotiate PPP protocol compression (LCP PCOMP). OPTIONAL accomp T ry to negotiate PPP address & control field compression (LCP ACCOMP). OPTIONAL trace Enable verb ...

  • Technicolor - Thomson TG576 v7 - page 555

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 555 dnsmetric DNS route metric to be used for the negotiated DNS servers. OPTIONAL idletime Maximum time the link may be idle (seconds). OPTIONAL idletrigger Consider the link being idle if no traffic is sent and/or received during the idle time. OPTIONAL unnumbered T ake local IP address from 'laddr&a ...

  • Technicolor - Thomson TG576 v7 - page 556

    ppp Commands 556 E-DOC-CTC-20071119-0014 v1.0 ppp ifdelete Delete a PPP interface. SYNT AX: ppp ifdelete intf = <{Internet}> where: intf The name of the PPP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 557

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 557 ppp ifdetach Detach a PPP interface. SYNT AX: ppp ifdetach intf = <{}> where: intf The name of the PPP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 558

    ppp Commands 558 E-DOC-CTC-20071119-0014 v1.0 ppp iflist Display the PPP interfaces. SYNT AX: ppp iflist [intf = <{Internet}]> where: intf The name of a PPP interface. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 559

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 559 ppp ifscan Scan a PPP interface for available interfaces. SYNT AX: ppp ifscan intf = <{Internet}> [time = <number{0-36000}]> where: intf The name of the PPP interface to scan. REQUIRED time The time to scan for services (in seconds). OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 560

    ppp Commands 560 E-DOC-CTC-20071119-0014 v1.0 ppp relay flush Remove all ethernet interfaces from the PPP relay agent list and terminate all ...

  • Technicolor - Thomson TG576 v7 - page 561

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 561 ppp relay ifadd Add an ethernet interface to the PPP relay list. SYNT AX: ppp relay ifadd intf = <{}> where: intf The ethernet intf to be added to the PPP relay agent list. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 562

    ppp Commands 562 E-DOC-CTC-20071119-0014 v1.0 ppp relay ifconfig Modify an ethernet interface from the PPP relay agent list. SYNT AX: ppp relay ifconfig intf = <{bridge|ethoa_8_35}> hwaddr = <hardware-address> where: intf The ethernet intf to be added to the PPP relay agent list. REQUIRED hwaddr The hardware address (e.g. Ethernet MAC a ...

  • Technicolor - Thomson TG576 v7 - page 563

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 563 ppp relay ifdelete Delete an ethernet interface from the PPP relay agent list. SYNT AX: ppp relay ifdelete intf = <{bridge|ethoa_8_35}> where: intf The ethernet intf to be added to the PPP relay agent list. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 564

    ppp Commands 564 E-DOC-CTC-20071119-0014 v1.0 ppp relay iflist Display all ethernet interfaces added to the PPP relay agent list. ...

  • Technicolor - Thomson TG576 v7 - page 565

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 565 ppp relay sesslist Display all active PPP relay sessions. ...

  • Technicolor - Thomson TG576 v7 - page 566

    ppp Commands 566 E-DOC-CTC-20071119-0014 v1.0 ppp rtadd Add a route to the routing table when PPP link comes up. SYNT AX: ppp rtadd intf = <{Internet}> dst = <ip-address> [dstmsk = <ip-mask(dotted or cidr)]> [label = <{None|DSCP|Interactive|Management| Video|VoIP-RTP|VoIP-Signal|default}]> [src = <ip-address]> [srcmsk ...

  • Technicolor - Thomson TG576 v7 - page 567

    ppp Commands E-DOC-CTC-20071119-0014 v1.0 567 ppp rtdelete Delete the route for a PPP link. SYNT AX: ppp rtdelete intf = <{Internet}> where: intf The PPP interface name for which to delete the route settings. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 568

    pptp Commands 568 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 569

    pptp Commands E-DOC-CTC-20071119-0014 v1.0 569 pptp Commands pptp flush Flushes the PPTP configuration. see page 570 pptp ifadd Adds a PPTP profile (backwards compatible with previous release, use profiles see page 571 pptp list Shows PPTP configuration. see page 572 pptp profadd Defines a new PPTP profile. see page 573 pptp profdelete Deletes a PP ...

  • Technicolor - Thomson TG576 v7 - page 570

    pptp Commands 570 E-DOC-CTC-20071119-0014 v1.0 pptp flush Flushes the PPTP configuration. ...

  • Technicolor - Thomson TG576 v7 - page 571

    pptp Commands E-DOC-CTC-20071119-0014 v1.0 571 pptp ifadd Adds a PPTP profile (backwards compatible with previous release, use profiles SYNT AX: pptp ifadd dest = <string> [rate = <number{10-10000}]> [encaps = <{vcmux|nlpid}]> [ac = <{never|always|keep}]> where: dest The W AN destination for this PPTP tunnel. T ypically a ph ...

  • Technicolor - Thomson TG576 v7 - page 572

    pptp Commands 572 E-DOC-CTC-20071119-0014 v1.0 pptp list Shows PPTP configuration. ...

  • Technicolor - Thomson TG576 v7 - page 573

    pptp Commands E-DOC-CTC-20071119-0014 v1.0 573 pptp profadd Defines a new PPTP profile. SYNT AX: pptp profadd name = <string> [qos = <{default}]> [encaps = <{vcmux|nlpid}]> [ac = <{never|always|keep}]> where: name The name for the new PPTP profile. REQUIRED qos The name of the qosbook entry , containing the settings for this ...

  • Technicolor - Thomson TG576 v7 - page 574

    pptp Commands 574 E-DOC-CTC-20071119-0014 v1.0 pptp profdelete Deletes a PPTP profile. SYNT AX: pptp profdelete name = <> where: name The name of the profile to delete. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 575

    pptp Commands E-DOC-CTC-20071119-0014 v1.0 575 pptp proflist Lists PPTP profiles. ...

  • Technicolor - Thomson TG576 v7 - page 576

    ra Commands 576 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 577

    ra Commands E-DOC-CTC-20071119-0014 v1.0 577 ra Commands ra config Configure remote access parameters. see page 578 ra start Starts temporary mode. see page 579 ra stop Stops temporary mode. see page 580 ...

  • Technicolor - Thomson TG576 v7 - page 578

    ra Commands 578 E-DOC-CTC-20071119-0014 v1.0 ra config Configure remote access parameters. SYNT AX: ra config [state = <{disabled|enabled}]> [secure = <{enabled|disabled}]> [port = <number]> [timeout = <number]> [mode = <{Permanent|Temporary}]> [ipintf = <string]> [randompassword = <{enabled|disabled}]> [ra ...

  • Technicolor - Thomson TG576 v7 - page 579

    ra Commands E-DOC-CTC-20071119-0014 v1.0 579 ra start Starts temporary mode. ...

  • Technicolor - Thomson TG576 v7 - page 580

    ra Commands 580 E-DOC-CTC-20071119-0014 v1.0 ra stop Stops temporary mode. ...

  • Technicolor - Thomson TG576 v7 - page 581

    saveall Command E-DOC-CTC-20071119-0014 v1.0 581 saveall Command Saves current configuration. ...

  • Technicolor - Thomson TG576 v7 - page 582

    script Commands 582 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 583

    script Commands E-DOC-CTC-20071119-0014 v1.0 583 script Commands script add Add line to script. see page 584 script delete Delete complete script or line from script. see page 585 script flush Flush scripts. see page 586 script list List script. see page 587 script run Run script. see page 588 ...

  • Technicolor - Thomson TG576 v7 - page 584

    script Commands 584 E-DOC-CTC-20071119-0014 v1.0 script add Add line to script. SYNT AX: script add name = <string> [index = <number]> command = <quoted string> where: name Name of script. REQUIRED index Line number (0 = add). OPTIONAL command Command. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 585

    script Commands E-DOC-CTC-20071119-0014 v1.0 585 script delete Delete complete script or line from script. SYNT AX: script delete name = <{autopvc_add_qos|autopvc_delete_qos| autopvc_add_bridge|autopvc_delete_pppoerelay| autopvc_add_ipoa|autopvc_delete_ipoa| autopvc_add_ethoa|autopvc_delete_ethoa| autopvc_add_pppoa|autopvc_delete_pppoa| autopvc_ ...

  • Technicolor - Thomson TG576 v7 - page 586

    script Commands 586 E-DOC-CTC-20071119-0014 v1.0 script flush Flush scripts. ...

  • Technicolor - Thomson TG576 v7 - page 587

    script Commands E-DOC-CTC-20071119-0014 v1.0 587 script list List script. SYNT AX: script list [name = <{autopvc_add_qos|autopvc_delete_qos| autopvc_add_bridge|autopvc_delete_pppoerelay| autopvc_add_ipoa|autopvc_delete_ipoa| autopvc_add_ethoa|autopvc_delete_ethoa| autopvc_add_pppoa|autopvc_delete_pppoa| autopvc_add_pppoe|autopvc_delete_pppoe| au ...

  • Technicolor - Thomson TG576 v7 - page 588

    script Commands 588 E-DOC-CTC-20071119-0014 v1.0 script run Run script. SYNT AX: script run name = <{autopvc_add_qos|autopvc_delete_qos| autopvc_add_bridge|autopvc_delete_pppoerelay| autopvc_add_ipoa|autopvc_delete_ipoa| autopvc_add_ethoa|autopvc_delete_ethoa| autopvc_add_pppoa|autopvc_delete_pppoa| autopvc_add_pppoe|autopvc_delete_pppoe| autopv ...

  • Technicolor - Thomson TG576 v7 - page 589

    service Commands E-DOC-CTC-20071119-0014 v1.0 589 service Commands service host add Add a service. see page 590 service host assign Assign a service to a host. see page 591 service host delete Delete a service. see page 592 service host disable Disable a service. see page 593 service host flush Flush all services. see page 594 service host list Dis ...

  • Technicolor - Thomson TG576 v7 - page 590

    service Commands 590 E-DOC-CTC-20071119-0014 v1.0 service host add Add a service. SYNT AX: service host add name = <quoted string> [mode = <{server|client|custom}]> where: name The name of the service. REQUIRED mode server , client or custom service ? OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 591

    service Commands E-DOC-CTC-20071119-0014 v1.0 591 service host assign Assign a service to a host. SYNT AX: service host assign name = <{ABC (Another Bittorent Client)|Age of Empires|Age of Mythology|AIM BitTorrent| Black and White|Call of Duty|Call of Duty - UnitedOffensive|CarbonCopy32|Castle Wolfenstein|Championship Manager 03-04| Checkpoint F ...

  • Technicolor - Thomson TG576 v7 - page 592

    service Commands 592 E-DOC-CTC-20071119-0014 v1.0 service host delete Delete a service. SYNT AX: service host delete name = <{ABC (Another Bittorent Client)|Age of Empires|Age of Mythology|AIM BitTorrent| Black and White|Call of Duty|Call of Duty - UnitedOffensive|CarbonCopy32|Castle Wolfenstein|Championship Manager 03-04| Checkpoint FW1 VPN|Com ...

  • Technicolor - Thomson TG576 v7 - page 593

    service Commands E-DOC-CTC-20071119-0014 v1.0 593 service host disable Disable a service. SYNT AX: service host disable [name = <{ABC (Another Bittorent Client)| Age of Empires|Age of Mythology|BearShare| BitTorrent|Black and White|Call of Duty| Call of Duty -United Offensive|CarbonCopy32| Castle Wolfenstein|ChampionshipManager 03-04| Checkpoint ...

  • Technicolor - Thomson TG576 v7 - page 594

    service Commands 594 E-DOC-CTC-20071119-0014 v1.0 service host flush Flush all services. ...

  • Technicolor - Thomson TG576 v7 - page 595

    service Commands E-DOC-CTC-20071119-0014 v1.0 595 service host list Display list of services. SYNT AX: service host list [name = <{ABC (Another Bittorent Client)| Age of Empires|Age of Mythology|BearShare| BitTorrent|Black and White|Call of Duty| Call of Duty -United Offensive|CarbonCopy32| Castle Wolfenstein|ChampionshipManager 03-04| Checkpoin ...

  • Technicolor - Thomson TG576 v7 - page 596

    service Commands 596 E-DOC-CTC-20071119-0014 v1.0 service host rule add Create/define service portmap. SYNT AX: service host rule add name = <{ABC (Another Bittorent Client)|Age of Empires|Age of Mythology|AIM BitTorrent| Black and White|Call of Duty|Call of Duty - UnitedOffensive|CarbonCopy32|Castle Wolfenstein|Championship Manager 03-04| Check ...

  • Technicolor - Thomson TG576 v7 - page 597

    service Commands E-DOC-CTC-20071119-0014 v1.0 597 triggerport Defines outbound trigger port. OPTIONAL triggerprotocol Protocol of the trigger port. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 598

    service Commands 598 E-DOC-CTC-20071119-0014 v1.0 service host rule delete Delete a service portmap. SYNT AX: service host rule delete name = <{ABC (Another Bittorent Client)|Age of Empires|Age of Mythology|AIM BitTorrent| Black and White|Call of Duty|Call of Duty - UnitedOffensive|CarbonCopy32|Castle Wolfenstein|Championship Manager 03-04| Chec ...

  • Technicolor - Thomson TG576 v7 - page 599

    service Commands E-DOC-CTC-20071119-0014 v1.0 599 triggerport Defines outbound trigger port. OPTIONAL triggerprotocol Protocol of the trigger port. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 600

    service Commands 600 E-DOC-CTC-20071119-0014 v1.0 service host stats Service statistics. ...

  • Technicolor - Thomson TG576 v7 - page 601

    service Commands E-DOC-CTC-20071119-0014 v1.0 601 service host triggerlist List all triggers. ...

  • Technicolor - Thomson TG576 v7 - page 602

    service Commands 602 E-DOC-CTC-20071119-0014 v1.0 service system ifadd Add an interface to the access list. SYNT AX: service system ifadd name = <{PPTP|HTTP|HTTPs|FTP|TELNET|RIP-Query| DNS-S|SNMP_AGENT|SSDP|MDAP|PING_RESPONDER}> group = <{wan|local|lan|tunnel|dmz|guest} or number> where: name The name of the service for this access list ...

  • Technicolor - Thomson TG576 v7 - page 603

    service Commands E-DOC-CTC-20071119-0014 v1.0 603 service system ifdelete Delete an interface from the access list. SYNT AX: service system ifdelete name = <{PPTP|HTTP|HTTPs|FTP|TELNET|RIP-Query| DNS-S|SNMP_AGENT|SSDP|MDAP|PING_RESPONDER}> group = <{wan|local|lan|tunnel|dmz|guest} or number> where: name The name of the service for this ...

  • Technicolor - Thomson TG576 v7 - page 604

    service Commands 604 E-DOC-CTC-20071119-0014 v1.0 service system ipadd Add an ip address (range) to the access list. SYNT AX: service system ipadd name = <{PPTP|HTTP|HTTPs|FTP|TELNET|RIP-Query| DNS-S|SNMP_AGENT|SSDP|MDAP|PING_RESPONDER}> ip = <ip-range> where: name The name of the service for this access list. REQUIRED ip The ip address ...

  • Technicolor - Thomson TG576 v7 - page 605

    service Commands E-DOC-CTC-20071119-0014 v1.0 605 service system ipdelete Delete an ip address (range) from the access list. SYNT AX: service system ipdelete name = <{PPTP|HTTP|HTTPs|FTP|TELNET|RIP-Query| DNS-S|SNMP_AGENT|SSDP|MDAP|PING_RESPONDER}> ip = <ip-range> where: name The name of the service for this access list. REQUIRED ip The ...

  • Technicolor - Thomson TG576 v7 - page 606

    service Commands 606 E-DOC-CTC-20071119-0014 v1.0 service system list Display services. SYNT AX: service system list [name = <{PPTP|PPTPD|PPTPGRE|SNTP| SLA_ICMP_PING|SLA_UDP_PING|HTTP|HTTPs|RAD| Dynamic DNS|dyndns|statdns|custom|No-IP|DtDNS| gnudip|DHCP-S|DHCP-R|SNMP_AGENT|SSDP|MDAP| CWMP-C|CWMP-S|RAS|SRAS|IP_COMMANDS|ICMP_PING| SENDTO|PING_RESP ...

  • Technicolor - Thomson TG576 v7 - page 607

    service Commands E-DOC-CTC-20071119-0014 v1.0 607 service system mapadd Add a port map for a service. SYNT AX: service system mapadd name = <{PPTP|HTTP|HTTPs|HTTPI|FTP|TELNET|DNS- S|SNMP_AGENT|SSDP|MDAP}> intf = <{loop|Internet|LocalNetwork}> port = <{at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|data|gopher| h32 ...

  • Technicolor - Thomson TG576 v7 - page 608

    service Commands 608 E-DOC-CTC-20071119-0014 v1.0 service system mapdelete Delete a port map for a service. SYNT AX: service system mapdelete name = <{PPTP|HTTP|HTTPs|HTTPI|FTP|TELNET|DNS- S|SNMP_AGENT|SSDP|MDAP}> intf = <{loop|Internet|LocalNetwork}> port = <{at-echo|at-nbp|at-rtmp|at-zis|auth| bgp|biff|bootpc|bootps|chargen|data|go ...

  • Technicolor - Thomson TG576 v7 - page 609

    service Commands E-DOC-CTC-20071119-0014 v1.0 609 service system modify Modify a service. SYNT AX: service system modify name = <{PPTP|PPTPD|PPTPGRE|SNTP| SLA_ICMP_PING|SLA_UDP_PING|HTTP|HTTPs|RAD| DHCP-S|DHCP-R|SNMP_AGENT|SSDP|MDAP|CWMP-C| CWMP-S|RAS|SRAS|IP_COMMANDS|PING_RESPONDER}> [state = <{disabled|enabled}]> [port = <{at-echo| ...

  • Technicolor - Thomson TG576 v7 - page 610

    snmp Commands 610 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 611

    snmp Commands E-DOC-CTC-20071119-0014 v1.0 611 snmp Commands snmp community add Config an SNMP community string to allow snmp access over IP . see page 612 snmp community delete Delete an SNMP community string to prevent snmp access over IP . see page 613 snmp community list List all SNMP community strings in use for snmp access over IP . see page ...

  • Technicolor - Thomson TG576 v7 - page 612

    snmp Commands 612 E-DOC-CTC-20071119-0014 v1.0 snmp community add Config an SNMP community string to allow snmp access over IP . SYNT AX: snmp community add securityname = <{RWCommunity|ROCommunity}> communityname = <password> where: securityname Configure access rights/restrictions control for the community name. REQUIRED communityname ...

  • Technicolor - Thomson TG576 v7 - page 613

    snmp Commands E-DOC-CTC-20071119-0014 v1.0 613 snmp community delete Delete an SNMP community string to prevent snmp access over IP . SYNT AX: snmp community delete securityname = <{RWCommunity|ROCommunity}> where: securityname Access rights/restrictions control of the community name to be deleted. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 614

    snmp Commands 614 E-DOC-CTC-20071119-0014 v1.0 snmp community list List all SNMP community strings in use for snmp access over IP . ...

  • Technicolor - Thomson TG576 v7 - page 615

    snmp Commands E-DOC-CTC-20071119-0014 v1.0 615 snmp community modify Modify an SNMP community string to allow snmp access over IP . SYNT AX: snmp community modify securityname = <{RWCommunity|ROCommunity}> communityname = <password> where: securityname Configure access rights/restrictions control for the community name. REQUIRED communi ...

  • Technicolor - Thomson TG576 v7 - page 616

    snmp Commands 616 E-DOC-CTC-20071119-0014 v1.0 snmp config Configure global SNMP parameters. SYNT AX: snmp config [sysContact = <quoted string]> [sysName = <quoted string]> [sysLocation = <quoted string]> where: sysContact SNMP System Contact OPTIONAL sysName SNMP System Name OPTIONAL sysLocation SNMP System Location OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 617

    snmp Commands E-DOC-CTC-20071119-0014 v1.0 617 snmp get Get from supplied object identity . e.g. get objectid=.1.3.6.1.2.1.1.1.0 SYNT AX: snmp get [objectid = <string]> where: objectid Object identity to get from ... must include the instance which is 0 for scalar objects e.g. .1.3.6.1.2.1.1.1.0 sysDescription OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 618

    snmp Commands 618 E-DOC-CTC-20071119-0014 v1.0 snmp getnext Get next from supplied object identity . e.g. getnext objectid= SYNT AX: snmp getnext [objectid = <string]> where: objectid Object identity to getNext from e.g. .1.3.6.1.2.1.1 system returns sysDescription OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 619

    snmp Commands E-DOC-CTC-20071119-0014 v1.0 619 snmp ifadd Create a new SNMP interface. SYNT AX: snmp ifadd intf = <string> dest = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> where: intf The name for the new SNMP interface. REQUIRED dest The destination interface for this SNMP ...

  • Technicolor - Thomson TG576 v7 - page 620

    snmp Commands 620 E-DOC-CTC-20071119-0014 v1.0 snmp ifattach Attach an SNMP interface. SYNT AX: snmp ifattach intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> where: intf The name of the SNMP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 621

    snmp Commands E-DOC-CTC-20071119-0014 v1.0 621 snmp ifconfig Modify an SNMP interface. SYNT AX: snmp ifconfig intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> [securityname = <{RWCommunity|ROCommunity}]> [communityname = <password]> where: intf The name of the SNMP int ...

  • Technicolor - Thomson TG576 v7 - page 622

    snmp Commands 622 E-DOC-CTC-20071119-0014 v1.0 snmp ifdelete Delete an SNMP interface. SYNT AX: snmp ifdelete intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> where: intf The name of the SNMP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 623

    snmp Commands E-DOC-CTC-20071119-0014 v1.0 623 snmp ifdetach Detach an SNMP interface. SYNT AX: snmp ifdetach intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}> where: intf The name of the SNMP interface. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 624

    snmp Commands 624 E-DOC-CTC-20071119-0014 v1.0 snmp iflist Display the SNMP interfaces. SYNT AX: snmp iflist [intf = <{loop|ethif1|ethif2|ethif3|ethif4| wlif1|ceoc|bridge|OBC|ethport1|Internet_ppp| Internet|LocalNetwork}]> where: intf The name of an SNMP interface. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 625

    snmp Commands E-DOC-CTC-20071119-0014 v1.0 625 snmp walk W alk from supplied object identity . e.g. walk objectid=.1.3.6.1.2.1.1 SYNT AX: snmp walk [objectid = <string]> where: objectid Object identity to walk from e.g. .1.3.6.1.2.1.1 system walks the system group OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 626

    sntp Commands 626 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 627

    sntp Commands E-DOC-CTC-20071119-0014 v1.0 627 sntp Commands sntp add Add NTP server see page 628 sntp config Modify/Display configuration see page 629 sntp debug traceconfig Modify SNTP client trace configuration see page 630 sntp delete Delete NTP server from list see page 631 sntp flush Flush NTP server list and SNTP client configuration see pag ...

  • Technicolor - Thomson TG576 v7 - page 628

    sntp Commands 628 E-DOC-CTC-20071119-0014 v1.0 sntp add Add NTP server SYNT AX: sntp add [addr = <ip-address]> [name = <string]> [version = <number{1-4}]> where: addr IP address of NTP server to be added to list OPTIONAL name DNS name of NTP server to be added to list. If both the IP address and the DNS name are provided, the IP a ...

  • Technicolor - Thomson TG576 v7 - page 629

    sntp Commands E-DOC-CTC-20071119-0014 v1.0 629 sntp config Modify/Display configuration SYNT AX: sntp config [state = <{enabled|disabled}]> [poll = <number{1-10080}]> [pollpresync = <number{1-60}]> where: state Enable/Disable SNTP client OPTIONAL poll polling interval (1 min, ... ,10080min(=7days)) OPTIONAL pollpresync polling int ...

  • Technicolor - Thomson TG576 v7 - page 630

    sntp Commands 630 E-DOC-CTC-20071119-0014 v1.0 sntp debug traceconfig Modify SNTP client trace configuration SYNT AX: sntp debug traceconfig [state = <{disabled|enabled}]> where: state Enable/Disable tracing. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 631

    sntp Commands E-DOC-CTC-20071119-0014 v1.0 631 sntp delete Delete NTP server from list SYNT AX: sntp delete [addr = <ip-address]> [name = <string]> where: addr IP address of NTP server to be removed from list OPTIONAL name DNS name of NTP server to be removed from list OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 632

    sntp Commands 632 E-DOC-CTC-20071119-0014 v1.0 sntp flush Flush NTP server list and SNTP client configuration ...

  • Technicolor - Thomson TG576 v7 - page 633

    sntp Commands E-DOC-CTC-20071119-0014 v1.0 633 sntp list List the NTP servers ...

  • Technicolor - Thomson TG576 v7 - page 634

    software Commands 634 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 635

    software Commands E-DOC-CTC-20071119-0014 v1.0 635 software Commands software download Download parameters. see page 636 software upgrade Reboots the modem to initiate the SW upgrade. New software available on a see page 637 software version Displays the software version. see page 638 ...

  • Technicolor - Thomson TG576 v7 - page 636

    software Commands 636 E-DOC-CTC-20071119-0014 v1.0 software download Download parameters. SYNT AX: software download filetype = <{firmware|configuration}> url = <string> [username = <string]> [password = <string]> filesize = <string> [targetfilename = <string]> where: filetype The type of the file to be downloade ...

  • Technicolor - Thomson TG576 v7 - page 637

    software Commands E-DOC-CTC-20071119-0014 v1.0 637 software upgrade Reboots the modem to initiate the SW upgrade. New software available on a ...

  • Technicolor - Thomson TG576 v7 - page 638

    software Commands 638 E-DOC-CTC-20071119-0014 v1.0 software version Displays the software version. ...

  • Technicolor - Thomson TG576 v7 - page 639

    system Commands E-DOC-CTC-20071119-0014 v1.0 639 system Commands system config Set or change system config parameters. see page 640 system debug autosave Autosave debugging commands see page 641 system debug stats Cpu and memory statistics see page 642 system dst Set daylight saving values see page 643 system flush Flush system configuration. see p ...

  • Technicolor - Thomson TG576 v7 - page 640

    system Commands 640 E-DOC-CTC-20071119-0014 v1.0 system config Set or change system config parameters. SYNT AX: system config [upnp = <{disabled|enabled}]> [tr64 = <{disabled|enabled}]> [mdap = <{disabled|enabled}]> [led = <{green|red|orange|flash|off}]> [resetbutton = <{disabled|enabled}]> [digestauth = <{disabled| ...

  • Technicolor - Thomson TG576 v7 - page 641

    system Commands E-DOC-CTC-20071119-0014 v1.0 641 system debug autosave Autosave debugging commands SYNT AX: system debug autosave [trace = <{disabled|enabled}]> where: trace Enable/Disable autosave traces OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 642

    system Commands 642 E-DOC-CTC-20071119-0014 v1.0 system debug stats Cpu and memory statistics SYNT AX: system debug stats [reset = <{disabled|enabled}]> where: reset Reset cpu statistics. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 643

    system Commands E-DOC-CTC-20071119-0014 v1.0 643 system dst Set daylight saving values SYNT AX: system dst [status = <{Disable|Enable}]> [mode = <{Absolute|Relative}]> [startdate = <dd/mm/yyyy]> [starttime = <hh:mm:ss]> [enddate = <dd/mm/yyyy]> [endtime = <hh:mm:ss]> [startweekday = <{Monday|Tuesday|Wednesday| ...

  • Technicolor - Thomson TG576 v7 - page 644

    system Commands 644 E-DOC-CTC-20071119-0014 v1.0 endweekday Set the end weekday of the daylight saving in the relative mode OPTIONAL endhour Set the end hour of the daylight saving in the relative mode OPTIONAL endweek Set the end week of the daylight saving in the relative mode OPTIONAL endmonth Set the end month of the daylight saving in the rela ...

  • Technicolor - Thomson TG576 v7 - page 645

    system Commands E-DOC-CTC-20071119-0014 v1.0 645 system flush Flush system configuration. ...

  • Technicolor - Thomson TG576 v7 - page 646

    system Commands 646 E-DOC-CTC-20071119-0014 v1.0 system locale Set/Get regional settings. SYNT AX: system locale [dec_symbol = <{,|.}]> [group_symbol = <{.|,}]> [date_separator = <{/|-|.}]> [date_format = <{iso|ddmmyyyy|ddmmyy|mmddyyyy| mmddyy}]> [time_format = <{iso|hmmss}]> [datetime_format = <{iso|date+time|time ...

  • Technicolor - Thomson TG576 v7 - page 647

    system Commands E-DOC-CTC-20071119-0014 v1.0 647 system ra config Configure Remote assistance params. SYNT AX: system ra config [secure = <{disabled|enabled}]> [port = <number]> [timeout = <number]> where: secure Enable/Disable https. OPTIONAL port Set destination port. OPTIONAL timeout Set connection timeout in minutes. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 648

    system Commands 648 E-DOC-CTC-20071119-0014 v1.0 system reboot Reboot the modem. ...

  • Technicolor - Thomson TG576 v7 - page 649

    system Commands E-DOC-CTC-20071119-0014 v1.0 649 system reset Reset to (factory or ISP) defaults: user specific settings will be cleared ! SYNT AX: system reset factory = <{yes|no}> proceed = <{no|yes}> where: factory Option to reset to factory REQUIRED proceed Confirmation for resetting the modem. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 650

    system Commands 650 E-DOC-CTC-20071119-0014 v1.0 system settime Set/Get date, time, timezone, daylight savings time, uptime. SYNT AX: system settime [time = <hh:mm:ss]> [timezone = <(+ or -)hh:mm]> [daylightsaving = <{disabled|enabled}]> [geotimezonename = <quoted string]> [rtc = <{disabled|enabled}]> where: time Set t ...

  • Technicolor - Thomson TG576 v7 - page 651

    system Commands E-DOC-CTC-20071119-0014 v1.0 651 system timedreboot Set or change editing mode timed reboot SYNT AX: system timedreboot [state = <{disabled|enabled}]> [time = <number{0-983040}]> [date = <string]> where: state Enable/Disable timed reboot OPTIONAL time Change default countdown time (Min). OPTIONAL date Set date/time ...

  • Technicolor - Thomson TG576 v7 - page 652

    systemlog Commands 652 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 653

    systemlog Commands E-DOC-CTC-20071119-0014 v1.0 653 systemlog Commands systemlog flush Flush all messages in syslog message buffer . see page 654 systemlog send Send messages to remote syslog server . see page 655 systemlog show Show messages in the syslog message buffer . see page 656 ...

  • Technicolor - Thomson TG576 v7 - page 654

    systemlog Commands 654 E-DOC-CTC-20071119-0014 v1.0 systemlog flush Flush all messages in syslog message buffer . ...

  • Technicolor - Thomson TG576 v7 - page 655

    systemlog Commands E-DOC-CTC-20071119-0014 v1.0 655 systemlog send Send messages to remote syslog server . SYNT AX: systemlog send [fac = <{kern|user|mail|daemon|auth|syslog| lpr|news|uucp|cron|security|ftp|local6| local7}]> [sev = <{emerg|alert|crit|err|warning|notice| info|debug}]> [hist = <{disabled|enabled}]> dest = <ip-add ...

  • Technicolor - Thomson TG576 v7 - page 656

    systemlog Commands 656 E-DOC-CTC-20071119-0014 v1.0 systemlog show Show messages in the syslog message buffer . SYNT AX: systemlog show [fac = <{kern|user|mail|daemon|auth|syslog| lpr|news|uucp|cron|security|ftp|local6| local7}]> [sev = <{emerg|alert|crit|err|warning|notice| info|debug}]> [hist = <{disabled|enabled}]> where: fac S ...

  • Technicolor - Thomson TG576 v7 - page 657

    tls Commands E-DOC-CTC-20071119-0014 v1.0 657 tls Commands tls acs-client cert add Add a new certificate see page 658 tls acs-client cert delete Delete a certificate see page 659 tls acs-client cert list List certificates see page 660 tls acs-client config Display/modify tls settings see page 661 tls https-server cert add Add a new certificate see ...

  • Technicolor - Thomson TG576 v7 - page 658

    tls Commands 658 E-DOC-CTC-20071119-0014 v1.0 tls acs-client cert add Add a new certificate SYNT AX: tls acs-client cert add filename = <string> where: filename name of the certificate file REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 659

    tls Commands E-DOC-CTC-20071119-0014 v1.0 659 tls acs-client cert delete Delete a certificate SYNT AX: tls acs-client cert delete index = <number> where: index Certificate index REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 660

    tls Commands 660 E-DOC-CTC-20071119-0014 v1.0 tls acs-client cert list List certificates SYNT AX: tls acs-client cert list [index = <number]> [expand = <{disabled|enabled}]> where: index Certificate index OPTIONAL expand Display more information OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 661

    tls Commands E-DOC-CTC-20071119-0014 v1.0 661 tls acs-client config Display/modify tls settings SYNT AX: tls acs-client config [state = <{disabled|enabled}]> [auth-serv = <{disabled|enabled}]> [valid-date = <{disabled|enabled}]> [valid-domain = <{disabled|enabled}]> where: state SSL/TLS client for ACS state OPTIONAL auth-ser ...

  • Technicolor - Thomson TG576 v7 - page 662

    tls Commands 662 E-DOC-CTC-20071119-0014 v1.0 tls https-server cert add Add a new certificate SYNT AX: tls https-server cert add filename = <string> where: filename name of the certificate file REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 663

    tls Commands E-DOC-CTC-20071119-0014 v1.0 663 tls https-server cert delete Delete a certificate SYNT AX: tls https-server cert delete index = <number> where: index Certificate index REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 664

    tls Commands 664 E-DOC-CTC-20071119-0014 v1.0 tls https-server cert list List certificates SYNT AX: tls https-server cert list [index = <number]> [expand = <{disabled|enabled}]> where: index Certificate index OPTIONAL expand Display more information OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 665

    tls Commands E-DOC-CTC-20071119-0014 v1.0 665 tls https-server config Display/modify tls settings SYNT AX: tls https-server config [state = <{disabled|enabled}]> [auth-client = <{disabled|enabled}]> [valid-date = <{disabled|enabled}]> where: state SSL/TLS server for HTTPS state OPTIONAL auth-client Request client authentication OP ...

  • Technicolor - Thomson TG576 v7 - page 666

    tls Commands 666 E-DOC-CTC-20071119-0014 v1.0 tls self cert list List certificates SYNT AX: tls self cert list [index = <number]> [expand = <{disabled|enabled}]> where: index Certificate index OPTIONAL expand Display more information OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 667

    traceroute Command E-DOC-CTC-20071119-0014 v1.0 667 traceroute Command Send ICMP/UDP packets to trace the ip path. SYNT AX: traceroute addr = <ip-address> [count = <number{1-10}]> [size = <number{1-20000}]> [interval = <number{1000-60000}]> [maxhops = <number{1-255}]> [dstport = <number{1-65535}]> [maxfail = < ...

  • Technicolor - Thomson TG576 v7 - page 668

    upgrade Commands 668 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 669

    upgrade Commands E-DOC-CTC-20071119-0014 v1.0 669 upgrade Commands upgrade config Change the upgrade daemon configuration see page 670 upgrade debug sesslist Display the list of sessions see page 671 upgrade debug traceconfig Enable/disable upgrade daemon tracing see page 672 upgrade profile add Add a new file profile description see page 673 upgra ...

  • Technicolor - Thomson TG576 v7 - page 670

    upgrade Commands 670 E-DOC-CTC-20071119-0014 v1.0 upgrade config Change the upgrade daemon configuration SYNT AX: upgrade config [state = <{disabled|enabled}]> [protocol = <{tftp|ftp|http|https}]> where: state The upgrade daemon state OPTIONAL protocol The transfer protocol to be used for file download OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 671

    upgrade Commands E-DOC-CTC-20071119-0014 v1.0 671 upgrade debug sesslist Display the list of sessions ...

  • Technicolor - Thomson TG576 v7 - page 672

    upgrade Commands 672 E-DOC-CTC-20071119-0014 v1.0 upgrade debug traceconfig Enable/disable upgrade daemon tracing SYNT AX: upgrade debug traceconfig state = <{disabled|enabled}> where: state The upgrade daemon trace state REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 673

    upgrade Commands E-DOC-CTC-20071119-0014 v1.0 673 upgrade profile add Add a new file profile description SYNT AX: upgrade profile add extension = <{sts|ini|bin}> [maxsize(KBytes) = <number]> action = <{none|config_load|script_load| reboot|upgrade}> where: extension The extension of the new file profile REQUIRED maxsize(KBytes) The ...

  • Technicolor - Thomson TG576 v7 - page 674

    upgrade Commands 674 E-DOC-CTC-20071119-0014 v1.0 upgrade profile delete Delete a file profile description SYNT AX: upgrade profile delete extension = <{sts|ini|bin}> where: extension The extension of the file profile to be deleted REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 675

    upgrade Commands E-DOC-CTC-20071119-0014 v1.0 675 upgrade profile list Display a list of the file profile descriptions ...

  • Technicolor - Thomson TG576 v7 - page 676

    upgrade Commands 676 E-DOC-CTC-20071119-0014 v1.0 upgrade profile modify Modify a file profile description SYNT AX: upgrade profile modify extension = <{sts|ini|bin}> [maxsize(KBytes) = <number]> action = <{none|config_load|script_load| reboot|upgrade}> where: extension The extension of the new file profile REQUIRED maxsize(KBytes ...

  • Technicolor - Thomson TG576 v7 - page 677

    upgrade Commands E-DOC-CTC-20071119-0014 v1.0 677 upgrade start Start a new upgrade SYNT AX: upgrade start protocol = <{tftp|ftp|http|https}> [server = <string]> [filename = <string]> where: protocol The protocol to be used for the download REQUIRED server The server name or IP address OPTIONAL filename The file to be downloaded O ...

  • Technicolor - Thomson TG576 v7 - page 678

    upnp Commands 678 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 679

    upnp Commands E-DOC-CTC-20071119-0014 v1.0 679 upnp Commands upnp config Config upnp parameter(s) see page 680 upnp flush Flushes upnp config (i.e. to defaults) see page 681 upnp list List all registered devices see page 682 ...

  • Technicolor - Thomson TG576 v7 - page 680

    upnp Commands 680 E-DOC-CTC-20071119-0014 v1.0 upnp config Config upnp parameter(s) SYNT AX: upnp config [maxage = <number{60-999999}]> [writemode = <{full|natonly|readonly}]> [safenat = <{disabled|enabled}]> [preferredaddresses = <string]> where: maxage ssdp advertisements MAX-AGE (default = 1800) OPTIONAL writemode Configu ...

  • Technicolor - Thomson TG576 v7 - page 681

    upnp Commands E-DOC-CTC-20071119-0014 v1.0 681 upnp flush Flushes upnp config (i.e. to defaults) ...

  • Technicolor - Thomson TG576 v7 - page 682

    upnp Commands 682 E-DOC-CTC-20071119-0014 v1.0 upnp list List all registered devices SYNT AX: upnp list [verbose = <number{0-2}]> where: verbose V erbose level (default = 1) OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 683

    user Commands E-DOC-CTC-20071119-0014 v1.0 683 user Commands user add Add a user . see page 684 user config Modify the user . see page 685 user delete Delete a user . see page 686 user flush Flush the users. see page 687 user list Display the users. see page 688 user rights Display session rights. see page 689 ...

  • Technicolor - Thomson TG576 v7 - page 684

    user Commands 684 E-DOC-CTC-20071119-0014 v1.0 user add Add a user . SYNT AX: user add name = <string> password = <password> role = <> [hash2 = <string]> [descr = <quoted string]> [defuser = <{disabled|enabled}]> [defremadmin = <{disabled|enabled}]> [deflocadmin = <{disabled|enabled}]> where: name Use ...

  • Technicolor - Thomson TG576 v7 - page 685

    user Commands E-DOC-CTC-20071119-0014 v1.0 685 user config Modify the user . SYNT AX: user config name = <{Administrator|tech}> [password = <password]> [role = <]> [descr = <quoted string]> [defuser = <{disabled|enabled}]> [defremadmin = <{disabled|enabled}]> [deflocadmin = <{disabled|enabled}]> where: name ...

  • Technicolor - Thomson TG576 v7 - page 686

    user Commands 686 E-DOC-CTC-20071119-0014 v1.0 user delete Delete a user . SYNT AX: user delete name = <{Administrator|tech}> where: name User name. REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 687

    user Commands E-DOC-CTC-20071119-0014 v1.0 687 user flush Flush the users. ...

  • Technicolor - Thomson TG576 v7 - page 688

    user Commands 688 E-DOC-CTC-20071119-0014 v1.0 user list Display the users. SYNT AX: user list [name = <{Administrator|tech}]> [channel = <{ftp|telnet|http|mdap|serial}]> [origin = <{lan|wan|local}]> [secure = <{disabled|enabled}]> where: name User name. OPTIONAL channel The selected channel. OPTIONAL origin The selected ori ...

  • Technicolor - Thomson TG576 v7 - page 689

    user Commands E-DOC-CTC-20071119-0014 v1.0 689 user rights Display session rights. ...

  • Technicolor - Thomson TG576 v7 - page 690

    wireless Commands 690 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 691

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 691 wireless Commands wireless debug stats T ransfer statistics see page 693 wireless debug txpower TX power override see page 694 wireless ifconfig Configures wireless settings. see page 695 wireless macacl add Add an ACL MAC entry see page 696 wireless macacl config Access Control List configuration ...

  • Technicolor - Thomson TG576 v7 - page 692

    wireless Commands 692 E-DOC-CTC-20071119-0014 v1.0 wireless secmode config Configure/Show the security mode. see page 718 wireless secmode wep Configure WEP settings. see page 719 wireless secmode wpa-psk Configure WP A-PSK settings. see page 720 wireless stations list List of the currently associated stations see page 721 wireless wds add add WDS ...

  • Technicolor - Thomson TG576 v7 - page 693

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 693 wireless debug stats T ransfer statistics ...

  • Technicolor - Thomson TG576 v7 - page 694

    wireless Commands 694 E-DOC-CTC-20071119-0014 v1.0 wireless debug txpower TX power override SYNT AX: wireless debug txpower [txpwr = <number]> where: txpwr TX power in milliwatt OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 695

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 695 wireless ifconfig Configures wireless settings. SYNT AX: wireless ifconfig [state = <{enabled|disabled}]> [channel = <{auto|1|2|3|4|5|6|7|8|9|10|11|12| 13}]> [ssid = <quoted string]> [any = <{enabled|disabled}]> [interop = <{802.11b|802.11b(legacy)/g| 802.11b/g|802.11g}]& ...

  • Technicolor - Thomson TG576 v7 - page 696

    wireless Commands 696 E-DOC-CTC-20071119-0014 v1.0 wireless macacl add Add an ACL MAC entry SYNT AX: wireless macacl add [ssid_id = <number{0-5}]> hwaddr = <hardware-address> permission = <{allow|deny}> [name = <quoted string]> where: ssid_id ssid id OPTIONAL hwaddr The Ethernet MAC address of the ACL entry REQUIRED permissi ...

  • Technicolor - Thomson TG576 v7 - page 697

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 697 wireless macacl config Access Control List configuration SYNT AX: wireless macacl config [ssid_id = <number{0-5}]> [control = <{lock|unlock|register}]> [regtime = <number{15-3600}]> where: ssid_id ssid id OPTIONAL control Access Control List mode OPTIONAL regtime Registration time ...

  • Technicolor - Thomson TG576 v7 - page 698

    wireless Commands 698 E-DOC-CTC-20071119-0014 v1.0 wireless macacl delete Delete an ACL MAC entry SYNT AX: wireless macacl delete ssid_id = <number{0-5}> hwaddr = <hardware-address> where: ssid_id ssid id REQUIRED hwaddr hardware address of the ACL entry REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 699

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 699 wireless macacl flush Flushes ACL entries SYNT AX: wireless macacl flush [ssid_id = <number{0-5}]> proceed = <{disabled|enabled}> where: ssid_id ssid id OPTIONAL proceed Confirmation required REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 700

    wireless Commands 700 E-DOC-CTC-20071119-0014 v1.0 wireless macacl list Shows a list of all configured ACL entries SYNT AX: wireless macacl list [ssid_id = <number{0-5}]> where: ssid_id ssid id OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 701

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 701 wireless macacl modify Modify an ACL entry SYNT AX: wireless macacl modify ssid_id = <number{0-5}> hwaddr = <hardware-address> [permission = <{allow|deny}]> [name = <quoted string]> where: ssid_id ssid id REQUIRED hwaddr The Ethernet MAC address of the ACL entry REQUIRED per ...

  • Technicolor - Thomson TG576 v7 - page 702

    wireless Commands 702 E-DOC-CTC-20071119-0014 v1.0 wireless macacl register Start a registration process (only for register mode) SYNT AX: wireless macacl register proceed = <{disabled|enabled}> where: proceed Confirmation required REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 703

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 703 wireless mssid ifadd Add an extra ssid context SYNT AX: wireless mssid ifadd ssid = <string> where: ssid ssid REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 704

    wireless Commands 704 E-DOC-CTC-20071119-0014 v1.0 wireless mssid ifattach Attach a ssid context SYNT AX: wireless mssid ifattach ssid_id = <number{1-5}> where: ssid_id ssid REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 705

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 705 wireless mssid ifconfig Configure a ssid context SYNT AX: wireless mssid ifconfig ssid_id = <number{0-5}> [ssid = <string]> [apisolation = <{disabled|enabled}]> [any = <{disabled|enabled}]> [secmode = <{disable|wep|wpa-psk}]> [WEPkey = <quoted string]> [WPAPSKkey ...

  • Technicolor - Thomson TG576 v7 - page 706

    wireless Commands 706 E-DOC-CTC-20071119-0014 v1.0 wireless mssid ifdelete Delete a ssid context SYNT AX: wireless mssid ifdelete ssid_id = <number{1-5}> where: ssid_id ssid REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 707

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 707 wireless mssid ifdetach Detach a ssid context SYNT AX: wireless mssid ifdetach ssid_id = <number{1-5}> where: ssid_id ssid REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 708

    wireless Commands 708 E-DOC-CTC-20071119-0014 v1.0 wireless mssid iflist Multiple ssid configuration SYNT AX: wireless mssid iflist [ssid_id = <number{0-5}]> where: ssid_id ssid OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 709

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 709 wireless multiuni add add a multicast to unicat mapping SYNT AX: wireless multiuni add multicast = <hardware-address> unicast = <hardware-address> where: multicast Multicast MAC REQUIRED unicast Unicast MAC REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 710

    wireless Commands 710 E-DOC-CTC-20071119-0014 v1.0 wireless multiuni delete delete all multicast mappings SYNT AX: wireless multiuni delete multicast = <hardware-address> where: multicast Multicast MAC REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 711

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 711 wireless multiuni flush flush all multicast to unicast mappings ...

  • Technicolor - Thomson TG576 v7 - page 712

    wireless Commands 712 E-DOC-CTC-20071119-0014 v1.0 wireless multiuni list show configured multicast to unicast mappings ...

  • Technicolor - Thomson TG576 v7 - page 713

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 713 wireless multiuni scanresults display detected multicast mac addresses SYNT AX: wireless multiuni scanresults [rescan = <{no|yes}]> where: rescan rescan for new multicast addresses OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 714

    wireless Commands 714 E-DOC-CTC-20071119-0014 v1.0 wireless qos apacconfig configure AP EDCA parameters SYNT AX: wireless qos apacconfig [class = <{AC_BE|AC_BK|AC_VI|AC_VO}]> [cwmax = <{1|3|7|15|31|63|127|255|511|1023| 2047|4095|8191|16383|32767}]> [cwmin = <{0|1|3|7|15|31|63|127|255}]> [aifsn = <number{1-15}]> [txop = <n ...

  • Technicolor - Thomson TG576 v7 - page 715

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 715 wireless qos config configure QoS settings SYNT AX: wireless qos config [mode = <{disabled|wmm}]> where: mode WMM active OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 716

    wireless Commands 716 E-DOC-CTC-20071119-0014 v1.0 wireless qos staacconfig configure ST A EDCA parameters SYNT AX: wireless qos staacconfig [class = <{AC_BE|AC_BK|AC_VI|AC_VO}]> [cwmax = <{1|3|7|15|31|63|127|255|511|1023| 2047|4095|8191|16383|32767}]> [cwmin = <{0|1|3|7|15|31|63|127|255}]> [aifsn = <number{1-15}]> [txop = & ...

  • Technicolor - Thomson TG576 v7 - page 717

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 717 wireless reset Reset Wireless interface settings to defaults SYNT AX: wireless reset proceed = <{disabled|enabled}> where: proceed Confirmation required REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 718

    wireless Commands 718 E-DOC-CTC-20071119-0014 v1.0 wireless secmode config Configure/Show the security mode. SYNT AX: wireless secmode config [mode = <{disable|wep|wpa-psk}]> where: mode security mode OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 719

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 719 wireless secmode wep Configure WEP settings. SYNT AX: wireless secmode wep [encryptionkey = <quoted string]> where: encryptionkey WEP key: expected format 5 or 13 ASCII characters, or 10 or 26 HEX digits. OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 720

    wireless Commands 720 E-DOC-CTC-20071119-0014 v1.0 wireless secmode wpa-psk Configure WP A-PSK settings. SYNT AX: wireless secmode wpa-psk [presharedkey = <quoted string]> [version = <{WPA|WPA2|WPA+WPA2}]> where: presharedkey WP A-PSK key: expected format 8 to 63 ASCII characters or 64 HEX digits. OPTIONAL version wpa version OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 721

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 721 wireless stations list List of the currently associated stations SYNT AX: wireless stations list [hwaddr = <hardware-address]> [ssid_id = <number{0-5}]> where: hwaddr The MAC address of station OPTIONAL ssid_id Selected BSS OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 722

    wireless Commands 722 E-DOC-CTC-20071119-0014 v1.0 wireless wds add add WDS station SYNT AX: wireless wds add bssid = <hardware-address> [name = <quoted string]> where: bssid The WDS bssid REQUIRED name A user specified reference name OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 723

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 723 wireless wds config WDS configuration parameters SYNT AX: wireless wds config [state = <{disabled|enabled}]> where: state WDS functionality OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 724

    wireless Commands 724 E-DOC-CTC-20071119-0014 v1.0 wireless wds delete delete WDS station SYNT AX: wireless wds delete bssid = <hardware-address> where: bssid The WDS bssid REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 725

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 725 wireless wds flush Flush all wds stations ...

  • Technicolor - Thomson TG576 v7 - page 726

    wireless Commands 726 E-DOC-CTC-20071119-0014 v1.0 wireless wds list list WDS stations ...

  • Technicolor - Thomson TG576 v7 - page 727

    wireless Commands E-DOC-CTC-20071119-0014 v1.0 727 wireless wds scanresults scan all networks SYNT AX: wireless wds scanresults [rescan = <{disabled|enabled}]> where: rescan perform a new scan OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 728

    xdsl Commands 728 E-DOC-CTC-20071119-0014 v1.0 ...

  • Technicolor - Thomson TG576 v7 - page 729

    xdsl Commands E-DOC-CTC-20071119-0014 v1.0 729 xdsl Commands xdsl config Modify/Display dsl configuration see page 730 xdsl debug bitloadinginfo Displays # bits per tone see page 731 xdsl debug deltconfig Dual Ended Line T esting interface see page 732 xdsl debug deltinfo Dual Ended Line T est result display see page 733 xdsl debug modemoptioninfo ...

  • Technicolor - Thomson TG576 v7 - page 730

    xdsl Commands 730 E-DOC-CTC-20071119-0014 v1.0 xdsl config Modify/Display dsl configuration SYNT AX: xdsl config [adslmultimode = <{adsl|adsl2|adsl2plus}]> [detect-lop = <{disabled|enabled}]> [syslog = <{disabled|enabled}]> where: adslmultimode Set/Show selected multimode type of the modem OPTIONAL detect-lop Detect Loss Of Power ...

  • Technicolor - Thomson TG576 v7 - page 731

    xdsl Commands E-DOC-CTC-20071119-0014 v1.0 731 xdsl debug bitloadinginfo Displays # bits per tone ...

  • Technicolor - Thomson TG576 v7 - page 732

    xdsl Commands 732 E-DOC-CTC-20071119-0014 v1.0 xdsl debug deltconfig Dual Ended Line T esting interface SYNT AX: xdsl debug deltconfig [state = <{disabled|enabled}]> where: state Enable/Disable dual ended line testing OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 733

    xdsl Commands E-DOC-CTC-20071119-0014 v1.0 733 xdsl debug deltinfo Dual Ended Line T est result display ...

  • Technicolor - Thomson TG576 v7 - page 734

    xdsl Commands 734 E-DOC-CTC-20071119-0014 v1.0 xdsl debug modemoptioninfo The modem options bitmap display ...

  • Technicolor - Thomson TG576 v7 - page 735

    xdsl Commands E-DOC-CTC-20071119-0014 v1.0 735 xdsl debug multimode Config custom multimode SYNT AX: xdsl debug multimode [config = <[+/-]flag[+/-flag...]{default t1.413issue2 g992.1_annex_a g992.2 g992.5_annex_m}]> where: config The custom multimode bitmap OPTIONAL ...

  • Technicolor - Thomson TG576 v7 - page 736

    xdsl Commands 736 E-DOC-CTC-20071119-0014 v1.0 xdsl debug traceconfig Config the adsl tracelevel SYNT AX: xdsl debug traceconfig level = <{0|1|2|3|4}> where: level T race Level (0=disable tracing; 1=enable dsl manager tracing; 2=enable dsl driver tracing) REQUIRED ...

  • Technicolor - Thomson TG576 v7 - page 737

    xdsl Commands E-DOC-CTC-20071119-0014 v1.0 737 xdsl info Displays status information about modem SYNT AX: xdsl info [expand = <{disabled|enabled}]> [g.997.1 = <{disabled|enabled}]> [counter_period_filter = <{current|15_minutes| 24_hours}]> [counters_reset = <{no|yes}]> where: expand Condensed / Expanded listing link informat ...

  • Technicolor - Thomson TG576 v7 - page 738

    xdsl Commands 738 E-DOC-CTC-20071119-0014 v1.0 xdsl version Display xdsl version information. ...

  • Technicolor - Thomson TG576 v7 - page 739

    ...

  • Technicolor - Thomson TG576 v7 - page 740

    THOMSON T elecom Belgium Prins Boudewijnlaan 47 www .thomson-broadband.com © 2007 Thomson. All rights reserved. E-DOC-CTC-20071119-0014 v1.0 ...

Manufacturer Technicolor - Thomson Category Network Router

Documents that we receive from a manufacturer of a Technicolor - Thomson TG576 v7 can be divided into several groups. They are, among others:
- Technicolor - Thomson technical drawings
- TG576 v7 manuals
- Technicolor - Thomson product data sheets
- information booklets
- or energy labels Technicolor - Thomson TG576 v7
All of them are important, but the most important information from the point of view of use of the device are in the user manual Technicolor - Thomson TG576 v7.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Technicolor - Thomson TG576 v7, service manual, brief instructions and user manuals Technicolor - Thomson TG576 v7. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Technicolor - Thomson TG576 v7.

Similar manuals

A complete manual for the device Technicolor - Thomson TG576 v7, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Technicolor - Thomson TG576 v7 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Technicolor - Thomson TG576 v7.

A complete Technicolor - Thomson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Technicolor - Thomson TG576 v7 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Technicolor - Thomson TG576 v7, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Technicolor - Thomson TG576 v7, that we can find in the current document
3. Tips how to use the basic functions of the device Technicolor - Thomson TG576 v7 - which should help us in our first steps of using Technicolor - Thomson TG576 v7
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Technicolor - Thomson TG576 v7
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Technicolor - Thomson TG576 v7 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Technicolor - Thomson TG576 v7?

Use the form below

If you did not solve your problem by using a manual Technicolor - Thomson TG576 v7, ask a question using the form below. If a user had a similar problem with Technicolor - Thomson TG576 v7 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)