English dropdown-ico

Manual Xantech PA1235

16 pages 0.59 mb
Download

Go to site of 16

Summary
  • Xantech PA1235 - page 1

    ®  1 Amplifiers & Preamplifiers INST ALLA TION INSTRUCTIONS P A1235 2 CHANNEL POWER AMPLIFIER 123456 PA1235 12 CHANNEL POWER AMPLIFIER POWER GENERAL INFORMATION To enhance the ease of installation and obtain optimum performance from the PA1235, we recommend that you first become familiar with all its features and special capabilities by stu ...

  • Xantech PA1235 - page 2

    ®  2 • 12-11-10-9-8-7-6 Output Flexibility. Each of the 12 amplifiers can be driven singly or bridged to allow several channel and power output capabilities. It can be configured into seven power packages as follows: - Twelve 35-watt amplifiers - 12 total. - One 150 and ten 35-watt amplifiers - 11 total. - Two 150 and eight 35-watt amplifiers ...

  • Xantech PA1235 - page 3

    ®  3 Amplifiers & Preamplifiers In addition, this switch must be left in the MANUAL OFF (OUT) position to permit an external DC Control Voltage to power the PA1235 ON and OFF. Refer to " REMOTE MASTER ON/OFF CONTROL " terminals, item #13. NOTE: The PA1235 may also be powered ON/OFF with an external AC line switch into which the po ...

  • Xantech PA1235 - page 4

    ®  4 8. COMMON AUDIO BUS. A single audio source, such as from a connected preamp, can drive one or more of the amplifier pairs simultaneously, as desired, from this Bus. Any of the amplifier pairs can be switched to the COMMON AUDIO BUS at will by use of the COMMON BUS / LOCAL Switch (see also item #6). 9. LEVEL (System) RESET Button. Pressing ...

  • Xantech PA1235 - page 5

    ®  5 Amplifiers & Preamplifiers 12. SPEAKER Terminals. These plug-in 4-terminal screw type connectors permit speaker wire sizes up to 12 gauge. When making connections for the STEREO mode, be sure to observe the " + " and " – " polarity markings, just under the LEFT & RIGHT markings, for each wire pair going to the ...

  • Xantech PA1235 - page 6

    ®  6 • Since it includes adjustable code groups, the user may inadvertently alter the installer configurations. • Also, since the user will require IR commands from other brands of equipment to control the total system, in addition to those of the PA1235, all commands should be consolidated into one learning device, for ease of use. APPLICA ...

  • Xantech PA1235 - page 7

    ®  7 Amplifiers & Preamplifiers 7. MUTE ON / OFF . Separate ON / OFF Mute commands give positive mute action without knowing the actual mute status. This is very helpful in a remote room where commands are sent “ blind ” without any visual aids for status. NOTE : In addition to MUTE OFF, the muted condition can be released with VOLume ( ...

  • Xantech PA1235 - page 8

    ®  8 2. If mounted in an equipment cabinet or other confining location, allow at least 2 inches of space above the top cover (see Fig. 4 ). Be sure there are large openings in the shelf below the unit and in the cabinet to allow the entry of cool air and the escape of warm air. 3. If the cabinet contains other heat generating components or you ...

  • Xantech PA1235 - page 9

    ®  9 Amplifiers & Preamplifiers 6. As a rule of thumb, use 18 gauge speaker wire for speaker runs up to 30' (9m), 16 gauge up to 70' (21m), and 14 gauge up to 150' (39m). The 4-terminal connectors accept wire sizes up to 12 gauge max. 7. Strip the insulation back about 1/4" (6mm) and twist the strands on each lead to pre ...

  • Xantech PA1235 - page 10

    ®  10 NOTE: Only one speaker is connected per amplifier pair in the BRIDGED mode! CAUTION: When operating in the BRIDGED mode (particularly when bench testing the amplifier) do not make a ground or any other kind of connection to the amplifier speaker terminals other than those to the individual speakers as shown. Failures caused by inappropria ...

  • Xantech PA1235 - page 11

    ®  11 Amplifiers & Preamplifiers REMOTE MASTER ON/OFF CONTROL 5-30 VOLTS DC + -- N/C GROUND STA TUS IR IN COMMON AUDIO BUS AC LINE ON/OFF COMMON BUS LOCAL LEFT RIGHT STEREO MONO BRIDGED CI GROUND STA TUS IR IN LEFT RIGHT SPEAKER + -- -- + + BRIDGED -- 1 COMMON BUS LOCAL LEFT RIGHT STEREO MONO BRIDGED CI GROUND STA TUS IR IN LEFT RIGHT SPEAK ...

  • Xantech PA1235 - page 12

    ®  12 8. To keep the system cost low, no AC power management is included. The user would need to operate the power switching for each component individually, using front panel power switches, or IR, as appropriate. Individual room Standby ON/OFF is provided, however. The STATUS of Standby ON/OFF is indicated at the IR receivers and keypads via ...

  • Xantech PA1235 - page 13

    ®  13 Amplifiers & Preamplifiers REMOTE MASTER ON/OFF CONTROL 5-30 VOLTS DC + -- COMMON BUS LOCAL LEFT RIGHT STEREO MONO BRIDGED CI GROUND STA TUS IR IN LEFT RIGHT SPEAKER + -- -- + + BRIDGED -- 2 COMMON BUS LOCAL LEFT RIGHT STEREO MONO BRIDGED CI GROUND STA TAUS IR IN LEFT RIGHT SPEAKER + -- -- + + BRIDGED -- 3 CAUTION RISK OF ELECTRIC SHO ...

  • Xantech PA1235 - page 14

    ®  14 REMOTE MASTER ON/OFF CONTROL 5-30 VOLTS DC + -- N/C GROUND STA TUS IR IN COMMON AUDIO BUS AC LINE ON/OFF COMMON BUS LOCAL LEFT RIGHT STEREO MONO BRIDGED CI GROUND STA TUS IR IN LEFT RIGHT SPEAKER + -- -- + + BRIDGED -- 1 COMMON BUS LOCAL LEFT RIGHT STEREO MONO BRIDGED CI GROUND STA TUS IR IN LEFT RIGHT SPEAKER + -- -- + + BRIDGED -- 2 COM ...

  • Xantech PA1235 - page 15

    ®  15 Amplifiers & Preamplifiers TROUBLE SHOOTING If you encounter a problem, please review the items below. Be sure, in addition, to check other system components, such as preamplifiers, CD players, speakers, speaker wiring, etc., that may be at fault. 1. Front Panel LEDs do not light – no sound. • Check line cord for good contact in a ...

  • Xantech PA1235 - page 16

    ®  16 SPECIFICATIONS Number of Channels ............................................................................................................ .........................................12 Power Output Rated Continuous Power, Each Channel: ............................................. 8 Ohms .......................... 35 Watts All 12 channe ...

Manufacturer Xantech Category Stereo Amplifier

Documents that we receive from a manufacturer of a Xantech PA1235 can be divided into several groups. They are, among others:
- Xantech technical drawings
- PA1235 manuals
- Xantech product data sheets
- information booklets
- or energy labels Xantech PA1235
All of them are important, but the most important information from the point of view of use of the device are in the user manual Xantech PA1235.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Xantech PA1235, service manual, brief instructions and user manuals Xantech PA1235. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Xantech PA1235.

Similar manuals

A complete manual for the device Xantech PA1235, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Xantech PA1235 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Xantech PA1235.

A complete Xantech manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Xantech PA1235 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Xantech PA1235, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Xantech PA1235, that we can find in the current document
3. Tips how to use the basic functions of the device Xantech PA1235 - which should help us in our first steps of using Xantech PA1235
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Xantech PA1235
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Xantech PA1235 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Xantech PA1235?

Use the form below

If you did not solve your problem by using a manual Xantech PA1235, ask a question using the form below. If a user had a similar problem with Xantech PA1235 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)