Manual EverFocus EZ-PLATECAM2

16 pages 1.63 mb
Download

Go to site of 16

Summary
  • EverFocus EZ-PLATECAM2 - page 1

    High Contrast Long Range License Plate Capture Camer a INST ALLA TION & OPERA TION MANUAL Before attempting to connect or operate, please read and follow these instructions. EZ-PLA TECAM2 ...

  • EverFocus EZ-PLATECAM2 - page 2

    Contents 1. CAUTIONS 2. FEATURES 3. ITEMS PROVIDED IN THE BOX 4. COMPONENT AND CONTROL NAMES AND FUNCTIONS 5. INSTALLATION 6. OSD MENU FUNCTIONS 7. INSTALLATION GUIDELINES 8. SPECIFICATIONS 9. DIMENSIONS 2 ...

  • EverFocus EZ-PLATECAM2 - page 3

    1. Cautions 3 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note - This equipment has been tested and found to comply with the ...

  • EverFocus EZ-PLATECAM2 - page 4

    1. Cautions 4 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life. To prev ...

  • EverFocus EZ-PLATECAM2 - page 5

    2. Features • 1/3" Sony Super-HAD Ⅱ CCD • OSD Menu system customizes performance to match application • High Resolution 600TV Lines • Special filter and IR LEDs provide maximum readability despite headlight glare • Plate capture up to 75mph (120Km/H) • 5.0 ~ 50.0mm Vari-focal lens captures license plate from 16ft ~ 90ft (5M ~ 28M ...

  • EverFocus EZ-PLATECAM2 - page 6

    4. Component and Control Names and Functions 6 ① Sunshield ② Mounting Bracket ③ IR LED : 100ea ④ External Zoom and Focus adjustments ⑤ Camera Body ⑥ Body Lock Ring ⑦ Base Lock Ring ⑧ Cover to Access Menu Controls and LED Level Control Pressing the “SETUP” button prompts the main setup menu. “PUSH” button : To access the main ...

  • EverFocus EZ-PLATECAM2 - page 7

    5. Installation • ADJUSTING CAMERA POSITION 7 * 1st Axis 90° * 2nd Axis 360° * 3rd Axis 360° Loosen socket head allen screws to change angle and/or rotate body about base. WARNING ! To prevent injury, this apparatus must be securely attached to the mounting surface with sufficient strength to hold the weight of the camera including wind and sn ...

  • EverFocus EZ-PLATECAM2 - page 8

    8 5. Installation • CONNECTIONS (1) DUAL(DC12V/AC24V) When you install the camera, please seal the end of cable to protect the camera connections from humidity problems. Power Supply 24VAC/ 1 A min. (Recommended) 12VDC/ 1.5 A min. (Optional) VIDEO IN VIDEO TEST POINT CONNECTION DVR OR OTHER CCTV EQUIPMENT HANDHELD ...

  • EverFocus EZ-PLATECAM2 - page 9

    9 6. OSD Functions OSD Menu Structure • OSD Access To access OSD menu unscrew cover plate on bottom of camera, press “in” on joystick to access OSD Menu . • MODE - INSTALLATION Installation Mode provides a bright video screen to adjust angle and focus. - LICENSE-PLATE License-plate Mode provides high contrast and clear license plate image f ...

  • EverFocus EZ-PLATECAM2 - page 10

    10 7. Installation Guidelines Camera Height • Consider camera height in distance calculation. • Sharper angles will alter the appearance of the plate. ( Shallow angles are recommended) Camera Height (Ft) Horizontal Distance (Ft) Capture Distance(Ft) 10 10 14.14 11 20 22.83 12 30 32.31 13 40 42.06 14 50 51.92 ...

  • EverFocus EZ-PLATECAM2 - page 11

    11 7. Installation Guidelines Camera Angles • Vertical and horizontal angle must not exceed 30 degrees to achieve proper view of the license plate. Capture Zone • Wider angles provide shorter capture distance. • Tele angles provide longer capture distance. WIDE END -66.5 @ f=5mm TELE END -7.4 @ f=50mm Optimized Capture Range for S/W License P ...

  • EverFocus EZ-PLATECAM2 - page 12

    12 7. Installation Guidelines Lane Width • Narrow lanes = less variation in plate location. • Wider lanes = more variation in plate location. • Lens should cover entire width of the lane. • Ensure horizontal eld of view is wide enough. Speed • Camera can capture moving vehicles up to 75mph. • Keep camera as low as possible. • Minim ...

  • EverFocus EZ-PLATECAM2 - page 13

    13 7. Installation Guidelines DVR • Camera is fully compatible with industry standard DVRs. • Check compression settings. • For best results use non-conditional refresh compression. (i.e. MJPEG or JPEG) (Other Video codecs can sometimes cause an indistinct picture) • Use D1 (720x480) resolution for best results. • Use 30fps (each channel) ...

  • EverFocus EZ-PLATECAM2 - page 14

    14 8. Specifications Signal Format NTSC PAL Image Device 1/3" Sony Super HAD Ⅱ CCD Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Inter. H/V 15.734KHz(H), 59.94Hz(V) 15.625KHz(H), 50Hz(V) H.Resolution 600TV Lines Minimum illumination 0 Lux (IR LED ON) S/N Ratio More than 50dB (AGC Off) Sync Syst ...

  • EverFocus EZ-PLATECAM2 - page 15

    9. Dimensions 15 ø110(ø4.33) 115.2(4.54) 317(12.48) 131.4(5.17) 171.5(6.75) 185.85(7.31) unit: mm(inch) Ф 45 ( Ф 1.77) Bottom of Bracket Ф 3.5( Ф 0.14) 90 degree 90 degree ...

  • EverFocus EZ-PLATECAM2 - page 16

    16 EverFocus Electronics Corp. Corporate Headquarters: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw marketing@everfocus.com.tw China Office: Room 609, Technology Trade Building, Shangdi Information Industry Base, Haidian District, Beijing, China 100085 TEL: +86-10-629733 ...

Manufacturer EverFocus Category Security Camera

Documents that we receive from a manufacturer of a EverFocus EZ-PLATECAM2 can be divided into several groups. They are, among others:
- EverFocus technical drawings
- EZ-PLATECAM2 manuals
- EverFocus product data sheets
- information booklets
- or energy labels EverFocus EZ-PLATECAM2
All of them are important, but the most important information from the point of view of use of the device are in the user manual EverFocus EZ-PLATECAM2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals EverFocus EZ-PLATECAM2, service manual, brief instructions and user manuals EverFocus EZ-PLATECAM2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product EverFocus EZ-PLATECAM2.

Similar manuals

A complete manual for the device EverFocus EZ-PLATECAM2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use EverFocus EZ-PLATECAM2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of EverFocus EZ-PLATECAM2.

A complete EverFocus manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual EverFocus EZ-PLATECAM2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the EverFocus EZ-PLATECAM2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the EverFocus EZ-PLATECAM2, that we can find in the current document
3. Tips how to use the basic functions of the device EverFocus EZ-PLATECAM2 - which should help us in our first steps of using EverFocus EZ-PLATECAM2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with EverFocus EZ-PLATECAM2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of EverFocus EZ-PLATECAM2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning EverFocus EZ-PLATECAM2?

Use the form below

If you did not solve your problem by using a manual EverFocus EZ-PLATECAM2, ask a question using the form below. If a user had a similar problem with EverFocus EZ-PLATECAM2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)