Manual SMC Networks SMC8011CM

36 pages 2.63 mb
Download

Go to site of 36

Summary
  • SMC Networks SMC8011CM - page 1

    EZ Connect Ethernet/ USB Cable Modem Ether net & USB Cable Modem - DOCSIS 1.1  High-speed Internet access ov er a cable network system  Data rate up to 40 Mbps do wnstream, 10 Mbps upstream  Alw ays-on digital connection  DOCSIS 1.1 certif ied  Supports all W indo ws systems through its Ethernet connection  USB support for W i ...

  • SMC Networks SMC8011CM - page 2

    38 T esla Irvine, CA 92618 Phone: (949) 679 -8000 EZ Connect Ether net/USB Cable Modem From SMC’ s EZ line of award-winning workgroup LAN solutions October 2002 ...

  • SMC Networks SMC8011CM - page 3

    Copyright Information furnished by SMC Networks, Inc. (SMC) is believed to be ac curate and reliable. However, no responsibilit y is assumed by SMC for its use, nor for any infri ngements of pate nts or other ri ghts of third parties which m ay result from its use. No license is granted b y implication or oth erwise under any patent o r patent righ ...

  • SMC Networks SMC8011CM - page 4

    i L IMITED W ARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products t o be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC produ cts carry a standard 90-day limite d warranty from the date of purchase from SMC or its Authorized Reseller. SMC ma ...

  • SMC Networks SMC8011CM - page 5

    L IMITED W AR RANTY ii WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY ...

  • SMC Networks SMC8011CM - page 6

    iii C OMPLIANCES FCC - Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates , uses and can radiate radio frequency e ...

  • SMC Networks SMC8011CM - page 7

    C OMPLIANCES iv This information technology equipment complies with the requ irements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used withi n certain voltage limits and the Am endment Directive 93/68/E EC. For the evaluati ...

  • SMC Networks SMC8011CM - page 8

    v T ABLE OF C ONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Key Feature s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 System Require ments ...

  • SMC Networks SMC8011CM - page 9

    1 I NTRODUCTION The EZ Connect Ethernet/USB Cable Modem (SMC8011CM) is fully compliant with the Data Over Cable Service Interface Specification (DOCSIS 1.1) thus ensuring compatibility with the majority of cable Internet providers. It provides high-speed Internet access over the same cable network system that brings cable TV service to the home. Th ...

  • SMC Networks SMC8011CM - page 10

    I NTR ODUCTION 2 Key Features • High-speed Inter net access over a cable network system • Data rate of up to 10 Mbps upstream and 40 Mbps downstream • Always-on digital connection eliminates dial-up delays and provides transparent Internet access when initia ting a network request • Compatibility with cable suppliers is ensured by DOCSIS 1. ...

  • SMC Networks SMC8011CM - page 11

    P ACKAGE C ONTENTS 3 Package Contents After unpacking the EZ Connect Cable Modem, check the contents of the box to be sure you have received the following components: • EZ Connect Ethernet/USB Cable Modem • F our adhesiv e foot pads •1 U S B c a b l e • 1 RJ-45 Ethernet cable • 9 VDC Powe r Adapter • Quick Installation Guide • 1 SMC80 ...

  • SMC Networks SMC8011CM - page 12

    I NTR ODUCTION 4 System Requirements The EZ Connect Cable Modem requires the following PC features to operate: • For a USB connection: - A PC equipped with a USB port - Windows 98/ME/2000/XP - The computer must be configured with the TCP/IP protocols • For an Ethernet connection: - A computer with a 10/100 Mbps Ethernet connection - The compute ...

  • SMC Networks SMC8011CM - page 13

    5 H ARDWARE D ESCRIPTION The EZ Connect Ethernet/USB Cable Modem is an external cable modem product for high-speed Internet access applications, and complies with the DOCSIS 1.1 standard. The modem provides a concurrent USB and Ethernet connection to a PC or LAN and supports up to 17 users if allowed by your service provider. LED Functions The EZ C ...

  • SMC Networks SMC8011CM - page 14

    H ARDWARE D ESCRIPTION 6 DHCP Client and Server The EZ Connect Ethernet/USB Cable Modem implements both a DHCP client and server. Dynamic Host Configuration Protocol (DHCP) allows the modem to connect to a network and obtain necessary IP parameters for communication on that network. DHCP Client On startup, the DHCP client on the EZ Connect Ethernet ...

  • SMC Networks SMC8011CM - page 15

    7 I NSTALLING THE M ODEM Locating the Modem The EZ Connect Ethernet/USB Cable Modem can be placed anywhere there is enough flat space, such as on a desktop or shelf. Connecting the Modem Before connecting the EZ Connect Ethernet/USB Cable Modem, contact your cable service provider and check the following points: • Be sure that your service provid ...

  • SMC Networks SMC8011CM - page 16

    I NSTALLING THE M ODEM 8 The modem must be properly connected to the service provider’s cable jack. If you are connecting both a TV and the modem to this outlet, you will need to connect a splitter to the cable jack outlet. The splitter filters the TV signal onto one cable and the network signal onto a second cable. (See a typical example on page ...

  • SMC Networks SMC8011CM - page 17

    W IRING FOR M ULTIPLE U SERS (O PTIONAL ) 9 5. The diag ram below shows a typical computer/TV installation. Wiring for Multiple Users (Optional) Contact your ser vice provider for av ailability and instr uc tions if you need to configure your modem for multiple user ser vice. The SMC8011CM supports many multiple user configurations. It can easily s ...

  • SMC Networks SMC8011CM - page 18

    I NSTALLING THE M ODEM 10 Note: The maximum speed supported by the USB port is 12 Mbps. 2. The “Found New Hardw are” screen will appear. Insert the driver disk. When prompted for the location of the driver , enter the drive letter of you r C D d rive. 3. F oll ow the instructions given to install the driv er . 4. Re boot your computer if prompt ...

  • SMC Networks SMC8011CM - page 19

    E THER N ET I NSTALLATION IN W INDOWS 11 5. Select the option “Obtain an IP Address . ” The EZ Connect Ethernet/USB Cable Mod em will automatically assign an IP address to y our computer . 6. Click the “Gatewa y” tab and record the addresses listed under “Installed g ateways .” 7. Click the “DNS Configuration” tab . Locate the DNS s ...

  • SMC Networks SMC8011CM - page 20

    I NSTALLING THE M ODEM 12 6. Select the option “Obtain an IP Address automatically , ” and click “OK” or “Close” to close each window . The EZ Connect Ether net/USB Cable Modem will now automatically assign an IP address to y our computer . Windows XP 1. Select “Star t/Control P anel.” 2. In the “Pick a categor y , ” click “Ne ...

  • SMC Networks SMC8011CM - page 21

    M AKING A C ONNECTION TO THE E THER N ET P ORT 13 • Making a Connection to the Ethernet Port Use straight-through twisted- pair cable to connect the Ethernet port on the modem to a PC (or other network device such as a hub or switch). The Ethernet port supports auto- negotiation and sets the speed and transmission mode automatically (only if this ...

  • SMC Networks SMC8011CM - page 22

    I NSTALLING THE M ODEM 14 When inser ting an RJ-45 connector, be sure the tab on the connector clicks into position to ensure that it is properly seated. Caution: Do not insert a phone jack connector into any RJ-45 por t. Use only twisted-pair cables with RJ-45 connectors that conform with FCC standards . Notes: 1. When connecting to a hub or switc ...

  • SMC Networks SMC8011CM - page 23

    15 V IEWING M ODEM S TATISTICS The program provides a browser-based READ-ONLY display of the EZ Connect Ethernet/ USB Cable Modem’s sta tistics, and is pro vided to help your ISP troubleshoot the modem connection in the event of connection problems. The default Ethernet Web server IP address is http://192.168.100.1. The EZ Connect Ethernet/USB Ca ...

  • SMC Networks SMC8011CM - page 24

    V IEWING M ODEM S TATISTICS 16 RF Signal The RF Signal page provides information about the current Downstream and Upstream signal status of your EZ Connect Ethernet/USB Cable Modem. ...

  • SMC Networks SMC8011CM - page 25

    A DDR ESSES 17 Addresses The Addresses page provides information about the ser vers your EZ Connect Ethern et/USB Cable Modem i s using. If the c able modem did not connect to the Cable Modem Termination System (CMTS) or Customer Premise Equipment (CPE), it will show the default values displayed on this screen. ...

  • SMC Networks SMC8011CM - page 26

    V IEWING M ODEM S TATISTICS 18 Configuration The Configuration page provides information about the cable modem settings of the EZ Connect Ethernet/USB Cable Modem. If you want to reset to the default values, click “Reset SMC8011CM. ” Note: T o access the configuration interface, enter the user name “SMC” with the default passw ord “SMC” ...

  • SMC Networks SMC8011CM - page 27

    L OG M ESSAGE 19 Log Message The Logs page displays the last 300 events in memory. If over 300 events are recorded, the older entries will be dropped. To see new events, press the “Refresh” button on your browser. ...

  • SMC Networks SMC8011CM - page 28

    V IEWING M ODEM S TATISTICS 20 Help Info The Help page provides an overview of the Configuration Manager, and brief troubleshooting information. ...

  • SMC Networks SMC8011CM - page 29

    21 T ROUBLESHOOTING Cannot Connect to the Internet • Confirm that you have established an account with your service provider and that two-way cable service is provided. • Check that your computer is properly configured for TCP/IP. See “Installing the Modem” on page 7. • Check that all cables are connected to the modem and PC. V erify that ...

  • SMC Networks SMC8011CM - page 30

    T R OUBLESHOOTING 22 • For an Ethernet connection: If the Link LED on the network adapter’s bracket does not light, check the following items. - Make sure cabl e lengths are within the requir ements specified. (See “Making a Connection to the Ethernet Port” on page 13.) - Inspect all network cables and connections. Make sure the network cab ...

  • SMC Networks SMC8011CM - page 31

    23 P ORT AND C ABLE A SSIGNMENTS Caution: DO NOT insert a phone jack connector into any RJ-45 port. Use only twisted-pair cables with RJ-45 connectors that confor m with FCC standards . An Ethernet twisted-pair link segment requires two pairs of wires. Each wire pair is identified by two different colors. Each wire pair must be attached to the RJ-4 ...

  • SMC Networks SMC8011CM - page 32

    P ORT AND C ABLE A SSIGNMENTS 24 Straight-Through Cable If the twisted-pair cable is to join two ports and only one of the ports has an internal crossover (MDI-X), the cable used must be straight-through. Crossover Cable If the twisted-pair cable is to join two ports and either both ports are labeled with an “X” (MDI-X) or neither port is label ...

  • SMC Networks SMC8011CM - page 33

    25 S PECIFICATIONS General Standards IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX USB 1.1 Media Connection USB cable connection to PC: 90-ohm shielded USB cable, maximum length 1.5m (5 ft.) Ethernet 10BASE-T : Cat 3, 4, or 5 UTP cable F ast Ether net 100B ASE-TX: Cat 5 UTP Cable F-type female 75-ohm connector to CA TV coaxial cable PC Requirements Ho ...

  • SMC Networks SMC8011CM - page 34

    S PECIFICATIONS 26 Data Rate Downstream: 38 Mbps 30 Mbps (64Q AM) 42 Mbps (256Q AM) Upstream: 10 Mbps 320 ~ 5120 Kbps (QPSK) 640 ~ 10240 Kbps (16Q AM) Frequency Range Downstream: 88 MHz ~ 860 MHz Upstream: 5 MHz ~ 42 MHz Bandwidth Downstream: 6 MHz Upstream: 200 kHz, 400 kHz, 800 kHz, 1.6 MHz, 3.2 MHz Signal Level Downstream: Single Channel, -15 dB ...

  • SMC Networks SMC8011CM - page 35

    S PECIFICATIONS 27 Physical Characteristics Por ts 1 USB T y pe-B USB spec . 1.1 (modem to PC) 1 RJ-45 10/100B ASE-TX Ethernet (modem to computer, or to Ethernet hub/switch): supports 10/100Mbps, full/half duplex with auto-neg otiation 1 F-type female 75-ohm connector LEDs PWR, ETH LINK, Cable A CT , Cable STS, ETH/USB A CT Dimensions 22.86 x 5.08 ...

  • SMC Networks SMC8011CM - page 36

    38 T esl a Irvine, CA 92618 Phone: (949) 679-8 000 FOR TECHNICAL SUPPOR T , CALL: From U.S.A. and Canada (2 4 hours a day , 7 days a week) (800) SMC-4-Y OU; (949) 679-8000; F ax: (949) 679-1481 From Europe (8:00 AM - 5:30 PM UK T ime) 44 (0) 118 974 8700; Fax: 44 (0 ) 118 974 8701 INTERNET E-mail addresses: techsupport@smc.com european.techsupp ort ...

Manufacturer SMC Networks Category Network Card

Documents that we receive from a manufacturer of a SMC Networks SMC8011CM can be divided into several groups. They are, among others:
- SMC Networks technical drawings
- SMC8011CM manuals
- SMC Networks product data sheets
- information booklets
- or energy labels SMC Networks SMC8011CM
All of them are important, but the most important information from the point of view of use of the device are in the user manual SMC Networks SMC8011CM.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SMC Networks SMC8011CM, service manual, brief instructions and user manuals SMC Networks SMC8011CM. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SMC Networks SMC8011CM.

A complete manual for the device SMC Networks SMC8011CM, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SMC Networks SMC8011CM by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SMC Networks SMC8011CM.

A complete SMC Networks manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SMC Networks SMC8011CM - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SMC Networks SMC8011CM, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SMC Networks SMC8011CM, that we can find in the current document
3. Tips how to use the basic functions of the device SMC Networks SMC8011CM - which should help us in our first steps of using SMC Networks SMC8011CM
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SMC Networks SMC8011CM
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SMC Networks SMC8011CM in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SMC Networks SMC8011CM?

Use the form below

If you did not solve your problem by using a manual SMC Networks SMC8011CM, ask a question using the form below. If a user had a similar problem with SMC Networks SMC8011CM it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)