English dropdown-ico

Manual Blomberg DWS 54100 SS

25 pages 3.03 mb
Download

Go to site of 25

Summary
  • Blomberg DWS 54100 SS - page 1

    Installation Manual Dishwasher FOR MODELS (ADA Height) DWS 54100 SS DWS 54100 FBI USA ...

  • Blomberg DWS 54100 SS - page 2

    Installation Manual For Dishwasher Models DWS 54100 SS DWS 54100 FBI ...

  • Blomberg DWS 54100 SS - page 3

    1. IMPORT ANT SAFETY INSTRUCTIONS 1 1.1 INSPECT THE DISHW ASHER 2 1.2 HOW T O CONT ACT US : 2 2. TOOLS WHICH MA Y BE NEEDED 3 3. MA TERIALS WHICH MA Y BE NEEDED 3 4. MA TERIALS SUPPLIED 4 4.1 P ARTS SUPPLIED 4 4.2 MANUAL BAG 4 4.3 DISHW ASHER P ARTS BAG 1 4 4.4 DISHW ASHER P ARTS BAG 2 4 4.5 P ARTS A TT ACHED T O THE REAR OF THE DISHWASHER 4 5. DIS ...

  • Blomberg DWS 54100 SS - page 4

    1 USA     INTRODUCTION Please read this installation manual and particularly the safety instructions completely and carefully . They will save you time and effort and help to ensure optimum dishwasher performance. Be sure to observe all listed warnings and cautions. Look particularly fo ...

  • Blomberg DWS 54100 SS - page 5

    2 USA • Dishwasher must be secured to adjacent cabinetry using the brackets provided. Failure to do this may cause damage to property or bodily injury . • Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload. The dishwasher is designed for an electrical supply of 120 V (volts), 60 Hz (hertz), ...

  • Blomberg DWS 54100 SS - page 6

    3 USA 2. TOOLS WHICH MA Y BE NEEDED 3. MA TERIALS WHICH MA Y BE NEEDED (Additional materials may be required to comply with local codes) Hot W ater Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line. UL listed conduit connector or strain relief. T eontapeorotherpipethreadcompoundtoseal ...

  • Blomberg DWS 54100 SS - page 7

    4 USA                                             4. MA TERIALS SUPPLIED 4.1 P ARTS ...

  • Blomberg DWS 54100 SS - page 8

    5 USA 5. DISHW ASHER SPECIFICA TIONS 5.1 TECHNICAL FEA TURES Load capacity 8 place settings Permissible water pressure 4.35 - 145 psi (0.3 - 10 bars) Electrical connection 120 V (volts), 12 A (amps), 60 Hz (hertz) T otal power 1400 W (watts) Heater power 1240 W (watts) Notice : Because we continually strive to improve our products, we may change ou ...

  • Blomberg DWS 54100 SS - page 9

    6 USA 6. ENCLOSURE PREP ARA TION 6.1 ELECTRICAL PREP ARA TION W ARNING The dishwasher is designed for an electrical supply of 120 V , 60 Hz, AC, connected to a dishwasher-dedicated, properly grounded electrical circuit with a fuse or breaker rated for 15 amperes. 6.2 PREP ARA TION FOR INST ALLING MOUNTING BRACKETS   W ARNING Dishwasher must b ...

  • Blomberg DWS 54100 SS - page 10

    7 USA 6.3.1 INST ALLING THE FOOT SUPPORTS Supplied ( 4 ) If the height of the enclosure is 33 7 / 16 ” to 34 1 / 4 ” (850mm - 870mm) use short supports as shown in the figure. Supplied ( 4 ) If the height of the enclosure is above 34 1 / 4 ” (870mm) use long supports as shown in the figure. ...

  • Blomberg DWS 54100 SS - page 11

    8 USA  Adjust the front foot level with the adjusting wrench to balance and raise the dishwasher to the enclosure height. Adjust the rear foot level with a screwdriver to balance and raise the dishwasher to the enclosure height. Notice : • Make sure the dishwasher is plumb and notice dishwasher can be placed with a small clearance und ...

  • Blomberg DWS 54100 SS - page 12

    9 USA 6.4 PREP ARING THE W A TER CONNECTION (A) Install an easily accessible shut-off valve (not supplied) in the water supply line. All solder connections must be made before the water line is connected to the dishwasher ’s water inletvalve.W atercanalsobesuppliedtothedishwasherbyusingaexiblebraided? ...

  • Blomberg DWS 54100 SS - page 13

    10 USA 6.5 DRAIN PREP ARA TION The dishwasher drain hose may be connected to the drain plumbing in one of three ways (Figure A , B , C ). Notice : • Either one of the above methods must be used or the dishwasher will not operate properly . • A hose that attaches to a sink spray can burst if it is installed on the same water line as the di ...

  • Blomberg DWS 54100 SS - page 14

    11 USA  6.7 STEAM PROTECTION FOIL Steam will form inside the dishwasher during operation. At the end of the cycle, when the dishwasher door is opened, it is required to use a steam protection foil to prevent any steam from collecting on the underside of the counter top. 6.6.2 FITTING THE PROTECTION FOIL Before applying the steam protection foil ...

  • Blomberg DWS 54100 SS - page 15

    12 USA 7. PLACEMENT OF DISHW ASHER INTO THE OPENING Now place the dishwasher into the opening and get ready to connect all hoses and electrical connections. CAUTION Make sure all hoses are pulled through the side opening of the cabinet, no hoses are kinked and all slack is taken out as shown in the above figure. 7.1 DRAIN HOSE CONNECTION, W A TER S ...

  • Blomberg DWS 54100 SS - page 16

    13 USA 7.1.2 W A TER SUPPL Y CONNECTION W ater supply may be connected to the dishwasher in one of two ways: • With metal braided hose. • With copper tubing. 7.1.3 BRAIDED HOSE/COPPER TUBING After connections are made turn on the water supply to check for leaks. CAUTION • Hot water supply line: Use minimum 3/8” O.D. copper tubing o ...

  • Blomberg DWS 54100 SS - page 17

    14 USA                    7.3 READJUSTING FOOT LEVELS Now that the dishwasher is in the cabinet you must readjust the feet to bring the dishwasher up to the required height and attach it underneath the countertop. 1. Readjust the front foot levels with adju ...

  • Blomberg DWS 54100 SS - page 18

    15 USA                     Lock the toe kick brackets as shown with the plastic tab in the figure C by pushing the plastic tab on the dishwasher into the teeth of the bracket ( C ). 3. Now attach the toe kick to the bracket with the two (Ø 3 / 16 ” x 1 / 4 ” - Ø 4mm x 6mm) screws and ...

  • Blomberg DWS 54100 SS - page 19

    16 USA                7.5 INST ALLING THE OUTER DOOR (DWS 54100 FBI) Measure the height and width of the enclosure (Figure A ) and the toe kick. Determine how big the wooden door can be ...

  • Blomberg DWS 54100 SS - page 20

    17 USA            5. Attach the two mounting brackets to the wooden door with 4 screws (Ø 1 / 8 ” x 5 / 8 ” (Ø 3.5mm x 14mm) (Figure A ). 6. Mount the wooden door onto the dishwasher with the plastic mounting brackets which you have attached (Figure B ).   4. Place the plastic mou ...

  • Blomberg DWS 54100 SS - page 21

    18 USA                   7. Open the door and remove the two caps and two screws inside the door at position 1 and 3 (Figure C ). 8. Using the four screws Ø 3 / 16 ” x 1 11 / 16 ” (Ø 4mm x 43mm) provided, attach the wooden door to the d ...

  • Blomberg DWS 54100 SS - page 22

    19 USA     1 1. Check whether the bottom of the door hits the toe kick of the kitchen cabinet ( A ). 1 1.1. If the door hits the toe kick cut the necessary section out of the toe kick ( B ). 1 1.2. Apply silicon or sealant to the cut edge of the kitchen cabinet toe kick or paint so it does not absorb moisture. ADJUSTING DOOR TE ...

  • Blomberg DWS 54100 SS - page 23

    20 USA                                  Notice : If you have a European kitchen or want to install a wooden toe kick to match your kitchen, please refer to one of the two dr ...

  • Blomberg DWS 54100 SS - page 24

    21 USA 8. INST ALLER CHECKLIST Y our installer must have completed and checked the following: • The dishwasher is square and level. • The dishwasher is fastened securely to the cabinetry . • The dishwasher door opens and closes freely . The dishwasher door must close without hitting any cabinetry or counter top. • The inlet wate ...

  • Blomberg DWS 54100 SS - page 25

    17 9872 01 00-AA- USA ...

Manufacturer Blomberg Category Dishwasher

Documents that we receive from a manufacturer of a Blomberg DWS 54100 SS can be divided into several groups. They are, among others:
- Blomberg technical drawings
- DWS 54100 SS manuals
- Blomberg product data sheets
- information booklets
- or energy labels Blomberg DWS 54100 SS
All of them are important, but the most important information from the point of view of use of the device are in the user manual Blomberg DWS 54100 SS.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Blomberg DWS 54100 SS, service manual, brief instructions and user manuals Blomberg DWS 54100 SS. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Blomberg DWS 54100 SS.

Similar manuals

A complete manual for the device Blomberg DWS 54100 SS, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Blomberg DWS 54100 SS by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Blomberg DWS 54100 SS.

A complete Blomberg manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Blomberg DWS 54100 SS - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Blomberg DWS 54100 SS, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Blomberg DWS 54100 SS, that we can find in the current document
3. Tips how to use the basic functions of the device Blomberg DWS 54100 SS - which should help us in our first steps of using Blomberg DWS 54100 SS
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Blomberg DWS 54100 SS
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Blomberg DWS 54100 SS in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Blomberg DWS 54100 SS?

Use the form below

If you did not solve your problem by using a manual Blomberg DWS 54100 SS, ask a question using the form below. If a user had a similar problem with Blomberg DWS 54100 SS it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)