English dropdown-ico

Manual Intel PRO

146 pages 0.33 mb
Download

Go to site of 146

Summary
  • Intel PRO - page 1

    i EtherExpress ™ PR O/100 CardBus Mobile Adapter User’ s Guide How to Use This Manual This User’s Guide contains the latest and most complete information available at press time on the installation and operation of the PRO/100 CardBus adapter. It is designed to help both new and experienced network users install and configure the Intel produc ...

  • Intel PRO - page 2

    ii Copyright © 1997 Intel Corporation. All rights reserved. Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124-6497 Intel Corporation assumes no responsibility for errors or omissions in this guide. Nor does Intel make any commitment to update the information contained herein. * Other product and corporate names may be trademarks o ...

  • Intel PRO - page 3

    iii Contents Har d ware Installation .............................................. 1 Before Installing Hardware ................................................................... 1 Installing the Hardware ......................................................................... 3 What to Do Next ................................................... ...

  • Intel PRO - page 4

    iv CONTENTS IBM Local Ar ea Network Support Progr am ....................................... 38 IBM Local Ar ea Network Suppor t Progra m ( version 1.2) ................. 39 IBM PC LAN and IBM DOS LAN Requester ................................... 40 Manual Installation ............................................................................. 41 ...

  • Intel PRO - page 5

    v C O N T E N T S Network Operating System T roubleshooting ................................... 104 T roubleshooting Chec klist ................................................................ 116 Intel A utomated Customer Support ................... 119 Specifications ...................................................... 121 General Specification ...

  • Intel PRO - page 6

    vi CONTENTS ...

  • Intel PRO - page 7

    1 Follow the instructions in this chapter to install the PRO/100 CardBus adapter hardware and network cabling. See Chapter 2, Software Installation for instructions on how to install network software. The PRO/100 CardBus adapter provides access to both 10 Mbps and 100 Mbps networks with a single adapter cable, and auto-senses 10 Mbps or 100 Mbps ne ...

  • Intel PRO - page 8

    2 CHAPTER 1 Verify Other Required Equipment To install the PRO/100 CardBus adapter, you need the following: 1 A portable PC with a CardBus slot. Note that CardBus slots are different from 16-bit PCMCIA slots. If your CardBus adapter does not fit in your slot, it may be a 16-bit slot. Contact your computer dealer for more information. 2 A local area ...

  • Intel PRO - page 9

    3 Hardware Installation Installing the Hard ware Insert the PRO/100 CardBus adapter 1 Grasp the PRO/100 CardBus adapter by the edges with the Intel label facing upward and the wide PC Card connector next to the insert slot. 2 Insert the card into a CardBus slot and push it in until it is firmly seated. NOTE: The PRO/100 CardBus adapter will not fit ...

  • Intel PRO - page 10

    4 CHAPTER 1 Removing the PRO/100 CardBus adapter Follow the PC card removal instructions specified in the documentation for your computer. Connecting the LAN Adapter Cable to the Card • Attach the 15-pin connector at the end of the Intel adapter cable to the mating connector on the end of the adapter (see illustration below). Press the cable conn ...

  • Intel PRO - page 11

    5 Hardware Installation Connecting the Network Cable to the LAN Adapter Cable • Plug the network cable into the female RJ-45 connector, as shown in the figure. Connecting to the Network Cable to LAN Adapter Cable What to Do Next After installing the hardware and connecting cables, proceed to Chapter 2. Software Installation . You will need the In ...

  • Intel PRO - page 12

    6 CHAPTER 1 ...

  • Intel PRO - page 13

    7 Car dBus Installation Guidelines The PRO/100 CardBus adapter can be used in Windows 3.x, Windows 95, Windows NT, and MS-DOS environments, and with most common network operating systems. However, some current operating systems or Card and Socket Services versions do not yet support CardBus technology. In these cases you will be able to use the PRO ...

  • Intel PRO - page 14

    8 CHAPTER2 Installing with Windows 95 The first release of Windows 95 (4.00.950 or 950a) included built-in support for 16-bit PC Cards but not for 32-bit CardBus. However, your PRO/100 CardBus adapter can still be installed under Windows 95. See the procedure on the next page. Cardbus built-in support is included in Windows 95 OEM Service Release # ...

  • Intel PRO - page 15

    9 Software Installation Installing with Windows 95 V ersion 4.00.950 or 4.00.950a Windows 95 does not include ‘Hot Swap’ support for CardBus adapters. The PRO/100 CardBus adapter includes a driver that will let you use the device within Windows 95. To use this driver, however, you must first disable support for PC Cards in Windows 95. This mean ...

  • Intel PRO - page 16

    10 CHAPTER2 11 Under “Manufacturers,” click “Intel.” 12 Select the “Intel EtherExpress PRO/100 Mobile CardBus 32 manual load ." Note that this is the second driver listed. You may need to scroll the text to see the entire driver name. 13 Click OK. 14 The Network window reopens. 15 Click OK. The Intel dialog box appears displaying var ...

  • Intel PRO - page 17

    11 Software Installation 1 In the Control Panel, double-Click the System icon. The System Properties window opens. 2 Click the Device Manager tab. 3 Double-click PCMCIA Socket. 4 Click PCIC or compatible PCMCIA controller. 5 Click Remove. A removal confirmation window opens. 6 Click OK. The System Settings Change window opens. 7 Remove the Network ...

  • Intel PRO - page 18

    12 CHAPTER2 Re-enabling PC Card support with Windows 95 Version 4.00.950 or 4.00.950a If you have disabled PC Card and Socket support in order to use the PRO/100 CardBus adapter, and now want to use another PC Card, such as a PC Card modem in your computer, you will first need to re-enable the PC Card support as described in the following steps: 1 ...

  • Intel PRO - page 19

    13 Software Installation 8 Click OK. The System Properties window reopens. 9 Click Close. 10 Click Start. 11 Select Shut Down. 12 Select Restart the Computer and click Yes. Your computer is now set to use other PC Card devices. Installing Toshiba Computers with Windows 95 Version 4.00.950 or 4.00.950A If you are installing the PRO/100 CardBus adapt ...

  • Intel PRO - page 20

    14 CHAPTER2 8 Press the space bar until the PC Card Controller Mode is set to CardBus/16-bit. 9 Press the End button on your keyboard and press Y when prompted. 10 Reboot your computer. 11 Perform steps 1 through 17 under the heading “Installing with Windows 95 version 4.00.950 or 950a” at the beginning of the Installing with Windows 95 section ...

  • Intel PRO - page 21

    15 Software Installation 14 Press the End button on your keyboard and press Y when prompted. 15 Reboot your computer. 16 After your system has rebooted it is ready to support PC Cards under Windows 95. Installing with Windows 95 V ersion 4.00.950b (OSR2) or Later Windows 95 OSR2 and later versions support CardBus. This means you can use the built-i ...

  • Intel PRO - page 22

    16 CHAPTER2 Installing NetW are Client 32 ODI Drivers under Windows 95 When installing the PRO/100 CardBus adapter under Windows 95 you have the option of installing either an NDIS3 driver (also known as Miniport) or a 32-bit ODI client driver (Client 32). Windows 95 installation instructions vary slightly for different versions of Windows 95. See ...

  • Intel PRO - page 23

    17 Software Installation if installing from a Novell NetWare Server you are connected to. 3 Once you have selected the proper path, run SETUP.EXE and follow the Novell instructions. At the last screen, DO NOT select REBOOT. Instead, click CUSTOMIZE. NOTE If prompted to insert the Windows 95 CD-ROM, click OK and type the path to the CABS directory o ...

  • Intel PRO - page 24

    18 CHAPTER2 Installing with Windows NT 3.51 and 4.0 Windows NT 3.51 and 4.0 include full support for PC Cards and partial support for CardBus. The PRO/100 CardBus adapter includes a driver that will let you use the device within Windows NT. When loaded, this driver disables support for PC Cards in Windows NT. This means you cannot simultaneously us ...

  • Intel PRO - page 25

    19 Software Installation 11 Click OK. The Network Settings window reopens. 12 Click OK. The Network Settings Change window opens. 13 Click Restart Now to restart your computer. Re-enabling PC Card Support in Windows NT 3.51 The PRO/100 CardBus adapter cannot be used simultaneously with a PC Card in Windows NT 3.51. To remove the PRO/100 32-bit Mobi ...

  • Intel PRO - page 26

    20 CHAPTER2 9 Insert the Intel Network Drivers Disk . 10 Click OK. The Select OEM Option window opens. 11 Click OK. Windows NT Setup window briefly displays. 12 PRO/100 CardBus adapter Settings window opens, displaying the default settings. NOTE: In most circumstances, the default settings will properly operate the PRO/100 CardBus adapter. However, ...

  • Intel PRO - page 27

    21 Software Installation Installing with Windows 3.x and Windows fo r W orkgr oups To install under Windows 3.x or Windows for Workgroups , use the Intel Installation Program. Insert the Installation Disk, into your disk drive, and proceed as follows (substitute the correct drive letter for your system): 1 From the Program Manager, choose File, the ...

  • Intel PRO - page 28

    22 CHAPTER2 NOTE: Even though older Card and Socket Services software for MS-DOS and Windows 3.X may not support CardBus, it may be possible to use another PC Card simulta- neously with the PRO/100 CardBus adapter. Please refer to the README.TXT file or the Intel website for the latest information and tips regarding Card and Socket Services. The In ...

  • Intel PRO - page 29

    23 Software Installation 6 Set the path as A:NDIS and click OK. 7 Back at the LAPS Configuration window, in the Network Adapter section, select the PRO/100 CardBus adapter by clicking on it and then clicking Add. 8 In the Protocols section, select the protocols you wish to use by clicking on the protocols and then clicking Add. 9 In the Current Co ...

  • Intel PRO - page 30

    24 CHAPTER2 5 In the ‘Requester Installation’ window, select the the option ‘Edit CONFIG.SYS and copy all files’ and click OK. 6 In the ‘Step 1- choose the ODI LAN Driver’ window, click on the list box to display the list of LAN drivers. An Installation Message window will appear. Put the Intel Network Drivers Disk in the floppy drive a ...

  • Intel PRO - page 31

    25 Software Installation Installing Netw ork Software Use the instructions under this heading in the following circumstances: • To complete the installation of network software after you have run the Intel Installation Program : Find your network operating system in the alphabetical listing that follows. • To install software for network operat ...

  • Intel PRO - page 32

    26 CHAPTER2 Ar tisoft LANtastic version 6.0 NDIS 2.0 Driver 1 Run the Intel Installation Program from the Installation Disk. 2 Choose Artisoft LANtastic from the Select Network Operating System screen. 3 Follow the prompts to complete the Intel segment of the installation. 4 Run the Artisoft LANtastic 6.0 “install” program. Specify C:LANTASTI ...

  • Intel PRO - page 33

    27 Software Installation 5 Write down the IRQ number to use when you proceed with the installation. For example, if the IRQ=6, write down the number 6. Now continue with the Banyan Vines installation as follows: 1 Run the Intel Installation Program from the Installation Disk. 2 Choose Banyan VINES from the Select Network Operating System screen. 3 ...

  • Intel PRO - page 34

    28 CHAPTER2 DEC P A THW ORKS ver sions 5.x or 6.x NDIS 2.0 Driver These instructions are based on PATHWORKS documentation for configuration of a PC as a client workstation, using a system service already installed on a LAN Manager server and the LAN Manager SETUP diskette. Prior to installing the DEC PATHWORKS client software, it is necessary to de ...

  • Intel PRO - page 35

    29 Software Installation ;NI_IRQ = [IRQ VALUE FROM STEP 5 OF THE FIRST PROCEDURE ABOVE] to read NI_IRQ = [IRQ VALUE FROM STEP 5 OF THE FIRST PROCEDURE ABOVE] The NI_IRQ value must be the same as the interrupt value you will use for the Intel adapter. 6 Run the SETUP program from the PATHWORKS SETUP disk for LAN Manager. 7a For Pathworks 5.0, choose ...

  • Intel PRO - page 36

    30 CHAPTER2 15 Highlight the logical drive mapped by the SETUP program, and press Enter to run PWSETUP. 16 Press Enter to confirm the Software Destination C:PW. 17 Choose Express (or Custom if you have a lot of prior installation experience). 18 Select an appropriate Workstation Template, or create one. 19 Under Network Adapter Information, choose ...

  • Intel PRO - page 37

    31 Software Installation FTP Software LANW atch Packet and NDIS 2.0 Drivers FTP Software’s LANWatch network monitor software can be installed using Intel’s packet or NDIS 2.0 drivers. For information on which driver is appropriate for your network environment, refer to the FTP LANWatch documentation. FTP Software LANWatch Packet Driver Installa ...

  • Intel PRO - page 38

    32 CHAPTER2 FTP Software LANWatch NDIS 2.0 Driver Installation 1 Run the Intel Installation Program from the Installation Disk. 2 Choose FTP LANWatch from the Select Network Operating System screen. 3 Follow the prompts to complete the Intel segment of the installation. 4 Install LANWatch according to the instructions in your FTP LANWatch manual. 5 ...

  • Intel PRO - page 39

    33 Software Installation FTP Software PC/TCP Packet, NDIS 2.0, and ODI Drivers FTP Software’s PC/TCP Generic Ethernet Kernel ETHDRV.EXE can be installed using Intel’s Packet, ODI, or NDIS drivers. PC/TCP can also be used concurrently with NetWare. For information on which driver is appropriate for your network environment, see the FTP PC/TCP do ...

  • Intel PRO - page 40

    34 CHAPTER2 13 Use a text editor to modify the AUTOEXEC.BAT file as follows (PCTCP is the default installation directory): • Move the line containing the STARTNET.BAT command or the lines containing the network driver files to immediately above the line SET PCTCP=C:PCTCPPCTCP.INI • Add the line C:PCTCPODIPKT after the line PCTCP=C:PCTCPP ...

  • Intel PRO - page 41

    35 Software Installation • In the section PCTCP ifcust 0 change the line INTERFACE-TYPE=NDIS to read INTERFACE-TYPE=PKTDRV. 10 Save the file and exit the text editor. 11 Change to the C: (root) directory. 12 Use a text editor to modify the AUTOEXEC.BAT file as follows (PCTCP is the default installation directory): • Move the line containing t ...

  • Intel PRO - page 42

    36 CHAPTER2 7 Edit the AUTOEXEC.BAT file and add the following lines: C:PCTCPM32APD.COM C:PCTCPETHDRV.EXE 8 (This step is not required for PC/TCP versions 2.10 and later.) Using a text editor, add the following lines to your CONFIG.SYS file: DEVICE=[ PATH ]IPCUST.SYS DEVICE=[ PATH ]IFCUST.SYS where [ path ] is the drive and directory specified ...

  • Intel PRO - page 43

    37 Software Installation where [ path ] is the drive and directory specified in the PC/TCP installation. 6 Copy NET.CFG from the C:INTELM32A directory and the files LSL.COM and M32AODI.COM from the root directory of the Intel Network Drivers Disk to the PC/TCP directory created in the PC/TCP install procedure. 7 To start the workstation, load the ...

  • Intel PRO - page 44

    38 CHAPTER2 IBM Local Area Network Support Program IBM Local Area Network Support Program (version 1.36) NDIS 2.0 Driver 1 Run the Intel Installation Program from the Installation Disk. 2 Choose IBM LAN Support Program from the Select Network Operating System screen. 3 Follow the prompts to complete the Intel segment of the installation. 4 Install ...

  • Intel PRO - page 45

    39 Software Installation IBM Local Area Network Support Program (version 1.2) NDIS 2.0 Driver 1 Run the Intel Installation Program from the Installation Disk. 2 Choose IBM LAN Support Program from the Select Network Operating System screen. 3 Follow the prompts to complete the Intel segment of the installation. 4 Install the IBM Local Area Network ...

  • Intel PRO - page 46

    40 CHAPTER2 13 Change to the LANMAN directory on your hard disk or boot disk. 14 Use a text editor to modify the PROTOCOL.INI file in the C:LSP directory as follows: • Under the ETHERAND section, change the line that reads BINDINGS = TCMAC2 to read: BINDINGS = INTELNET • Underneath that section insert a new section that reads: [INTELNET] DRIVE ...

  • Intel PRO - page 47

    41 Software Installation Manual Installation All network drivers provided on the Intel Network Drivers Disk can be installed manually, without the Intel Installation Program. You must copy the correct driver files to your hard disk and make appropriate changes to CONFIG.SYS, AUTOEXEC.BAT, and configuration files such as NET.CFG (for ODI) or PROTOCO ...

  • Intel PRO - page 48

    42 CHAPTER2 6 When prompted, insert the Intel Network Drivers Disk. 7 Select “Intel EtherExpress PRO/100 Mobile CardBus 32” from the menu. 8 Continue with the installation until it is completed. 9 If installing Microsoft LAN Manager to run under Windows proceed to step 10. Otherwise, skip to step 15. 10 Run Windows. 11 Choose setup from “Main ...

  • Intel PRO - page 49

    43 Software Installation 13 Close the Network Drivers dialog box and click OK in the Network Setup box. 14 Complete the installation process, inserting the Intel Network Drivers Disk if required. 15 Continue with the installation until it is completed. 16 Click on the Control Panel in the “Main” group. 17 Select Startup from the Control Panel. ...

  • Intel PRO - page 50

    44 CHAPTER2 Windows for Workgroups Version 3.11 and NetWare (Using the ODI driver) 1 To configure Windows for Workgroups with NetWare, run the Intel Installation Program and choose Windows for Workgroups. 2 Choose YES to “Connect to Network Server.” 3 Choose “Novell NetWare” as your network server. 4 When the installation is complete, reboo ...

  • Intel PRO - page 51

    45 Software Installation 15 In the Network Setup dialog box, choose Drivers. 16 In the Network Drivers dialog box, choose Add Adapter. 17 In the Add Network Adapter box, choose Unlisted or Updated Network Adapter and click OK. 18 When prompted for an “unlisted, updated, or vendor-provided network driver disk,” insert the Intel Network Drivers D ...

  • Intel PRO - page 52

    46 CHAPTER2 6 If you have not installed network support, choose Networks in the Network Setup dialog box, select Install Windows Network, and click OK. Otherwise proceed to Step 7. Click the Sharing button to share files and printers. 7 In the Network Setup dialog box, choose Drivers. 8 In the Network Drivers dialog box, choose Add Adapter. 9 In th ...

  • Intel PRO - page 53

    47 Software Installation 11 Delete the old Intel configuration files from the Windows system directory. 12 Restart Windows. 13 Follow the instructions for installing drivers for Windows for Workgroups alone or Windows for Workgroups and NetWare. No vell NetW are ODI Driver The Intel ODI driver allows for the concurrent use of Novell NetWare and oth ...

  • Intel PRO - page 54

    48 CHAPTER2 SunSoft PC-NFS (version 3.5) NDIS 2.0 Driver 1 Run the Intel Installation Program from the Installation Disk. 2 Choose SunSoft PC-NFS from the Select Network Operating System screen. 3 Follow the prompts to complete the Intel segment of the installation. 4 Install PC-NFS for Ethernet according to instructions in the PC-NFS documentation ...

  • Intel PRO - page 55

    49 Software Installation No vell NetW are 32-bit ODI Drivers Installing the Client 32 Driver under Windows 3.x and DOS In order to install the Client 32 driver under Windows 3.x or DOS, the following software is needed: · PRO/100 CardBus adapter Network Drivers Disk · NetWare Client 32 for DOS/Win 3.1x disks from Novell Installing under DOS 1 Put ...

  • Intel PRO - page 56

    50 CHAPTER2 9 A screen will display the default settings for the driver. Most of the time, these settings do not need to be changed. Check the README.TXT for machine specific settings. 10 To complete installation, follow the onscreen instructions. Installing under Windows 3.x 1 Select File, Run, and type a:setup 2 Follow the onscreen instructions ...

  • Intel PRO - page 57

    51 Software Installation Ungermann-Bass Net/One for DOS NDIS 2.0 Driver The PRO/100 CardBus adapter is supported on Ungermann-Bass Net/One LAN Manager and MS-NET networks. There are two NDIS driver packages available from UB: XNS BNS/NDIS and TCP BNS/NDIS. These packages, used with a Intel NDIS driver, provide files that support DOS workstations. T ...

  • Intel PRO - page 58

    52 CHAPTER2 • At the end of the file, add the following fragments: [UBLOOP] DRIVERNAME = UBLOOP$ BINDINGS = INTELNET ;INTEL ADAPTER [INTELNET] DRIVERNAME = INTEL$ 8 Reboot the PC. W ollongong P athWa y Access f or DOS NDIS and ODI Drivers Wollongong PathWay Access for DOS can be installed using Intel NDIS or ODI drivers. Installation instructions ...

  • Intel PRO - page 59

    53 Software Installation 6 Copy the file M32ANDIS.EXE from C:INTELM32A directory to the PATHWAY directory on your hard disk or boot disk. 7 Continue with the “custom” instructions in the PathWay Access for DOS manual. 8 Reboot the PC. Wollongong PathWay ODI Installation 1 Run the Intel Installation Program from the Installation Disk. 2 Choose ...

  • Intel PRO - page 60

    54 CHAPTER2 ...

  • Intel PRO - page 61

    55 Who Should Consult This Chapter? This chapter contains additional information on PRO/100 CardBus adapter features and technical information on configuration requirements, including sample configuration files. You can use this information to modify an existing installation or perform a new installation manually without the assistance of the Intel ...

  • Intel PRO - page 62

    CHAPTER3 56 For Installation without the Intel Installation Program The information in this chapter can be used to manually configure the PRO/100 CardBus adapter. For manual installation, it is assumed that you have some experience with manual setup of network adapters, and know how to access and modify configuration files, using an ASCII text edit ...

  • Intel PRO - page 63

    57 Configuration Reference As additional vendors add CardBus support to Card and Socket Services, new driver software from Intel may be required to use the Intel CardBus Adapter with Card and Socket Services. Review the README.TXT file and check the Intel website for the latest information. Check with the vendor who supplied your Card and Socket Se ...

  • Intel PRO - page 64

    CHAPTER3 58 HotSwap The PRO/100 CardBus adapter currently supports HotSwap during connection to a network or host computer from a CardBus computer only if you are running versions of Windows 95 or Windows NT that fully support CardBus. This feature allows the CardBus to be removed from the computer, temporarily replaced with another type of card su ...

  • Intel PRO - page 65

    59 Configuration Reference NOTE: The suspend/resume feature is not supported unless Card and Socket Services software (or its equivalent under Windows 95 or Windows NT) supports CardBus and is running on the PC Card computer. Power Management Guidelines HotSwap and suspend/resume operations are subject to limitations dictated by the network operati ...

  • Intel PRO - page 66

    CHAPTER3 60 Memory Exclusion When using a memory manager (under DOS and Windows 3.X), you must exclude a 4K memory range between C000 and EF00 for the use of the PRO/100 CardBus adapter. For example: DEVICE=C:DOSHIMEM.SYS DEVICE=C:DOSEMM386.EXE NOEMS X=D200-D2FF This example excludes 4K of the D200 segment for use by the PRO/100 CardBus adapter ...

  • Intel PRO - page 67

    61 Configuration Reference FILES=50 BUFFERS=30 REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW DEVICE=C:LANTASTIPROTMAN.DOS /I:C:LANTASTI DEVICE=C:LANTASTIM32ANDIS.EXE REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE Sample AUTOEXEC.BAT PATH=C:UTIL;C:DOS; PROMPT $P$G CALL C:LANTASTISTARTNET.BAT Sample PROTOCOL.INI ;PROTOCOL.INI FOR LA ...

  • Intel PRO - page 68

    CHAPTER3 62 REM IF LANTASTIC IS DISABLED, SKIP EVERYTHING. IF EXIST DISABLED GOTO :STARTNET_DONE @ECHO ===== BEGIN LANTASTIC CONFIGURATION ===== PATH C:LANTASTI;%PATH% SET LAN_DIR=C:LANTASTI.NET LOADHIGH AI-NDIS BIND_TO=M32ANDIS_NIF AILANBIO @STARTNET.CFG REDIR T4700 @STARTNET.CFG IF EXIST NOSHARE GOTO :NOSHARE SERVER C:LANTASTI.NET @STARTNET.CF ...

  • Intel PRO - page 69

    63 Configuration Reference @ECHO ===== END LANTASTIC CONFIGURATION ===== :STARTNET_DONE CD Bany an VINES NOTE: If you are using DOS Multi-menu CONFIG.SYS, the three VINES related lines in the CONFIG.SYS will be located at the end of your CONFIG.SYS. You will have to manually move those lines into the proper menuitem section of your CONFIG.SYS. If ...

  • Intel PRO - page 70

    CHAPTER3 64 [INTELNET] DRIVERNAME = INTEL$ DEC P A THW ORKS 5.0 and 5.1 Sample CONFIG.SYS DEVICE=C:DOSHIMEM.SYS DEVICE=C:DOSEMM386.EXE NOEMS X=D200-D2FF FILES=40 BUFFERS=30 SHELL=C:DOSCOMMAND.COM /P /E:1024 LASTDRIVE=G Sample AUTOEXEC.BAT CDPW STARTNET.BAT Sample PROTOCOL.INI (after completion of install process) [PROTOCOL MANAGER] DRIVERNAM ...

  • Intel PRO - page 71

    65 Configuration Reference LANABASE = 0 [DATALINK] DRIVERNAME = DLL$MAC LG_BUFFERS = 14 SM_BUFFERS = 6 OUTSTANDING = 32 BINDINGS = M32ANDIS DECPARM = C:PW IRQ = 5 ;; YOUR DECNET ADDRESS IS AA0004008407 ;; [M32ANDIS] DRIVERNAME=INTEL$ Windows f or W orkgroups 3.11 Sample CONFIG.SYS DEVICE=C:DOSHIMEM.SYS REM INTEL PRO/100 CB — DO NOT CHANGE LIN ...

  • Intel PRO - page 72

    CHAPTER3 66 Sample AUTOEXEC.BAT C:WINDOWSNET START Sample PROTOCOL.INI [NETWORK.SETUP] VERSION=0X3110 NETCARD=M32AMAC,1,M32AMAC,1 TRANSPORT=MS$NETBEUI,NETBEUI TRANSPORT=MS$NDISHLP,MS$NDISHLP LANA0=M32AMAC,1,MS$NETBEUI LANA1=M32AMAC,1,MS$NDISHLP [NETBEUI] BINDINGS=M32AMAC,ASYMAC LANABASE=0 DRIVERNAME=NETBEUI$ SESSIONS=10 NCBS=12 [PROTMAN] DRIVERNA ...

  • Intel PRO - page 73

    67 Configuration Reference NETCARD=M32ANDIS.EXE TRANSPORT=*NETBEUI,NDISHLP.SYS Windows f or W orkgroups Using the ODI Driver with NetW are as Secondary Network Sample STARTNET.BAT REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW :M32A_MENU @ECHO OFF CLS GOTO %CONFIG% :M32A_E_INTEL C: CD C:NWCLIENT IF NOT EXIST M32AODI.COM GOTO M32A_ERROR LSL M32 ...

  • Intel PRO - page 74

    CHAPTER3 68 CD REM INTEL PRO/100 CB — DO NOT CHANGE LINES ABOVE Sample CONFIG.SYS REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW (MENU) [MENU] MENUITEM=M32A_E_INTEL,LOAD INTEL ETHEREXPRESS PRO/100 32-BIT MOBILE ADAPTER FOR NETWORK ACCESS MENUITEM=M32A_END,DO NOT LOAD ANY INTEL DRIVERS MENUCOLOR=15,0 [M32A_E_INTEL] [M32A_END] [COMMON] REM IN ...

  • Intel PRO - page 75

    69 Configuration Reference SET TEMP=C:DOS C:DOSSMARTDRV.EXE /X C+ REM INTEL PRO/100 CB — DO NOT CHANGE LINES BELOW :M32A_MENU @ECHO OFF CLS GOTO %CONFIG% :M32A_E_INTEL C:WINDOWSNET START C: CD C:NWCLIENT IF NOT EXIST C:NWCLIENTSTARTNET.BAT GOTO M32A_ERROR CALL C:NWCLIENTSTARTNET.BAT GOTO M32A_END :M32A_ERROR ECHO ERROR: UNABLE TO LOCATE ...

  • Intel PRO - page 76

    CHAPTER3 70 NETCARD=M32A$ODI,1,M32A$ODI,4 TRANSPORT=MS$NWLINKNB,NWLINK TRANSPORT=MS$NETBEUI,NETBEUI LANA0=M32A$ODI,1,MS$NETBEUI LANA1=M32A$ODI,1,MS$NWLINKNB [NET.CFG] PATH=C:NWCLIENTNET.CFG [M32A$ODI] [LINK DRIVER M32AODI] DATA=FRAME ETHERNET_802.2 [NWLINK] BINDINGS=M32AODI [NETBEUI] BINDINGS=M32AODI LANABASE=0 SESSIONS=10 NCBS=12 Sample [network ...

  • Intel PRO - page 77

    71 Configuration Reference Driver P arameters Reference The following paragraphs present configuration guidelines for each of the driver types: NDIS2 and NDIS3, ODI, and packet. These guidelines are followed by a comprehensive “keyword” reference section. All of the drivers described here automatically detect the speed of the network to which t ...

  • Intel PRO - page 78

    CHAPTER3 72 Most installations will be able to use the settings implemented in the NET.CFG file by the Intel Installation Program. If any parameters need to be changed, use an ASCII text editor to open and modify the NET.CFG file and insert the appropriate keywords and values after the line LINK DRIVER M32AODI Parameters can also be implemented on ...

  • Intel PRO - page 79

    73 Configuration Reference NOPREFETCH NOT PRESENT S (COMMAND LINE ONLY: SHOW RESIDENT LAN DRIVERS) U (COMMAND LINE ONLY: UNLOAD) OS/2 ODI Driver Configuration Notes (CBEODI.OS2) The OS/2 ODI driver M32AODI.OS2 conforms to the Novell "ODI Developer's Guide for OS/2 Client Driver Hardware Specific Modules" version 2.1. It is an IBM OS/ ...

  • Intel PRO - page 80

    CHAPTER3 74 NDIS 2.0.1 DOS Driver Configuration Notes The DOS NDIS driver M32ANDIS.EXE conforms to the 3Com/Microsoft LAN Manager Network Driver Interface Specification (NDIS) version 2.0.1. It is a DOS-based executable terminate-and-stay-resident (TSR) program that will configure itself according to the options specified in the PROTOCOL.INI file, ...

  • Intel PRO - page 81

    75 Configuration Reference NDIS 2.0.1 Keywords (M32ANDIS.EXE and M32ANDIS.OS2) KEYWORD DEFAULT VALID VALUES DRIVERNAME=INTEL$ (REQUIRED FIRST ITEM IN PROTOCOL.INI) MEMORY AUTO C000 - EF00 IOADDRESS AUTO 100 - FF80 IRQ AUTO 3 - 15 SOCKET AUTO 1 - 4 MODE MEM IO OR MEM NOCHECK NOT PRESENT NOLED NOT PRESENT TXBUFFERSIZE 2 1 - 10 RXBUFFERSIZE 15 1 - 30 ...

  • Intel PRO - page 82

    CHAPTER3 76 M32A.SYS (NDIS 3) Settings for Micr osoft Windows NT and Windows 95 M32A.SYS is an NDIS 3 Miniport driver. It conforms to the Microsoft Network Driver Interface Specification (NDIS). It supports both Windows NT and Windows 95. Windows NT Support The M32A.SYS driver supports the networking environment in Microsoft Windows NT versions 3.5 ...

  • Intel PRO - page 83

    77 Configuration Reference Parameter Default Valid Values Registry Value I/O PORT 0XF800 0X1000-0XF800 SAME MEMORY ADDRESS 0XD4000 0XC0000-0XDF000 SAME INTERRUPT 5 3, 4, 5, 7, SAME 10, 11, 15 INTERRUPT STYLE 0 AUTO DETECT 0 PCI IRQS 1 ISA IRQS 2 LINE SPEED 0 AUTODETECT 0 10 MB 1 100 MB 2 LINE MODE 1 AUTODETECT 0 HALF-DUPLEX 1 FULL-DUPLEX 2 PC CARD ...

  • Intel PRO - page 84

    CHAPTER3 78 The network node address can be modified by manually editing the registry and adding the parameter ‘NetworkAddress’ with a hexadecimal string value, such as ‘00A0C9112233’. If the user does NOT specify a ‘NetworkAddress’ then the M32A.SYS driver uses the network node address contained in the PRO/100 CardBus adapter Card Info ...

  • Intel PRO - page 85

    79 Configuration Reference SOCKET 0 AUTODETECT 0 11 22 33 44 The network node address can be modified by specifying a value for ‘NetworkAddress’ such as ‘00A0C9112233’. If the user does NOT specify a ‘NetworkAddress’ then the M32A.SYS driver uses the network node address contained in the PRO/100 CardBus adapter Card Information Structur ...

  • Intel PRO - page 86

    CHAPTER3 80 ERT HIGH LOW, MEDIUM, or HIGH NOEARLYRX NOT PRESENT NOEARLYTX NOT PRESENT LINESPEED AUTO 10 or 100 LINEMODE HALF HALF or FULL LINKDISABLE NOT PRESENT NOBURST NOT PRESENT LATENCY 32 0 - 255 CACHE 32 0, 4, 8, 16, or 32 NOWRITEPOST NOT PRESENT NOPREFETCH NOT PRESENT ...

  • Intel PRO - page 87

    81 Configuration Reference P acket Driver Settings (f or driver M32APD .COM) Packet driver parameters must be stated on the M32APD.COM command line when running the packet driver. Packet Driver Configuration Notes The Intel packet driver M32APD.COM conforms to FTP Software’s public domain packet-driver specification. It is a DOS-based terminate-a ...

  • Intel PRO - page 88

    CHAPTER3 82 LINKDISABLE NOT PRESENT NOBU RST NOT PRESENT LATENCY 32 0 - 2 55 CACHE 32 0, 4, 8, 16, OR 32 NOWRITEPOST NOT PRESENT NOPREFETCH NOT PRESENT SINT 60 (60 - 80) VERB OSE NOT PRESENT Packet Driver Example A typical sequence for loading the packet driver M32APD.COM and default configuration settings is as follows: M32APD ETHDRV If no default ...

  • Intel PRO - page 89

    83 Configuration Reference Ke ywo rd Alphabetical Reference ? displays command summary for driver CACHE sets the system cache line size on the CardBus Bridge. Valid arguments are system dependent and may include only 0 (cache disabled), 4, 8, 16, or 32. Changing this parameter may affect network performance. DIRECTENABLE For 32-bit NDIS3 Driver (M3 ...

  • Intel PRO - page 90

    CHAPTER3 84 I/O PORT see IOADDRESS IRQ specifies a hardware interrupt for use by the adapter. If the computer system uses PCI interrupts on the CardBus Bridge, this parameter is ignored (unless the ISAIRQ keyword is used as an override). If this parameter is not specified the driver will detect an IRQ automatically. ISAIRQ use this keyword to force ...

  • Intel PRO - page 91

    85 Configuration Reference For 32-bit NDIS3 Driver (M32A.SYS): LINESPEED forces operation to 10 or 100 Mbps. Valid parameters are AutoDetect, 10 Mbps, and 100 Mbps. Default keyword is AutoDetect. LINKDISABLE disables link integrity for non-IEEE 10BASE-T networks such as StarLAN 10. Without this keyword in the driver command line, the driver default ...

  • Intel PRO - page 92

    CHAPTER3 86 NOLED turns off LED indicators on LAN adapter module to conserve power. NOPREFETCH disables prefetching in memory-mapped I/O mode by turning off this capability on the CardBus bridge. Using this keyword may negatively impact performance. PCIIRQ use this keyword to force the driver to use PCI IRQ routing. Some CardBus bridges have the ca ...

  • Intel PRO - page 93

    87 Configuration Reference TXBUFFERSIZE sets the size of the adapter transmit packet buffer. This is the number of transmit packets in decimal in the range 1 - 10 for 16-bit drivers and 1 - 100 for the 32-bit ODI driver. Each packet adds approximately 1520 bytes to the resident size of the driver. The default is 2 packets. U (ODI)(MS-DOS command li ...

  • Intel PRO - page 94

    CHAPTER3 88 ...

  • Intel PRO - page 95

    89 This chapter contains troubleshooting information covering the most common issues encountered when installing the PRO/100 CardBus adapter, based on information developed by Intel Customer Support. This information is intended for users or network administrators who are already familiar with the PRO/100 CardBus adapter and its user documentation, ...

  • Intel PRO - page 96

    90 CHAPTER 4 Additional Sources of Information In addition to this User’s Guide , your computer and network documentation should also be consulted as needed. For the latest information on the PRO/ 100 CardBus adapter, see the README file on the Intel Network Drivers Disk, call the Intel BBS (see attached Support Page File), or visit the Intel Wor ...

  • Intel PRO - page 97

    91 Troubleshooting Diagnostic Self T est (MS-DOS only) Intel provides a DOS-based self test diagnostics program. This program, located on the PRO/100 CardBus adapter Network Drivers Disk, tests several PRO/100 CardBus adapter functions. It also reports test results, the serial number of the unit, and the node address. M32ATEST can only be run from ...

  • Intel PRO - page 98

    92 CHAPTER 4 Main Screen The program consists of several function “buttons” and a view pane. Pressing or invoking a function will bring up the corresponding screen in the view pane. This view remains until another is selected. To exit M32ATEST type 'x' or push the 'Exit' button. When a function is active, the button appears ...

  • Intel PRO - page 99

    93 Troubleshooting SOFTWARE This function attempts to determine what software is currently loaded which will affect the operation of the card. It displays the current version of DOS and Windows, and any Card and Socket Services available. HARDWARE This function attempts to determine if a CardBus Controller exists on the machine. It first checks for ...

  • Intel PRO - page 100

    94 CHAPTER 4 Error Messa g es Except as noted, these messages are specific to the Intel PRO/100 CardBus adapter. They are listed in strict numerical/alphabetical order, i.e., numbers appear before letters and messages starting with “The” are under the letter T, initial “A” or “An” under the letter A. For an explanation of other messages ...

  • Intel PRO - page 101

    95 Troubleshooting No free memory segment was found The resource selection in the driver was unable to find a 4KByte block of memory available for the driver's use. Check to ensure that a 4KByte block of memory is excluded from any memory managers present. If the error persists, use the MEMORY keyword to force a known address that's avail ...

  • Intel PRO - page 102

    96 CHAPTER 4 Please specify a number between 3 and 15 for the IRQ keyword The IRQ keyword only accepts decimal numbers between 3 and 15. Please specify either HALF or FULL for the LINEMODE keyword The LINEMODE keyword determines the duplex mode of the network. If the network connection is half-duplex, HALF should be used. If the network connection ...

  • Intel PRO - page 103

    97 Troubleshooting The LINESPEED keyword must be set to 10 or 100 The LINESPEED keyword is used to force the network line speed to either 10 Mbps or 100 Mbps. If the keyword is not present the line speed is automatically detected. The loopback test failed Before the driver finishes loading, it runs a loopback test. This tests transmits a network pa ...

  • Intel PRO - page 104

    98 CHAPTER 4 The selected memory is a ROM address The MEMORY keyword was used to force a particular memory address, but the resource checking in the driver reported a failure. To override the resource checking and load the driver anyway, use the NOCHECK keyword. The selected memory is a RAM address The MEMORY keyword was used to force a particular ...

  • Intel PRO - page 105

    99 Troubleshooting NOTE: This section applies only if you are running MS-DOS, Microsoft Windows 3.x, or Workgroups 3.11 with Card and Socket Services that support CardBus. Upgrading to new drivers from Intel may also be required, as new Card and Socket software is released. A driver failed to load, and I’m using Card and Socket Services Card and ...

  • Intel PRO - page 106

    100 CHAPTER 4 B When the PRO/100 CardBus adapter driver is loaded it either reads a configuration file or uses command line parameters to determine which resources it should use. The following is a list of driver types, driver file names, and the configuration method used by each: Type File Name Configuration Method ODI M32AODI.COM reads NET.CFG fi ...

  • Intel PRO - page 107

    101 Troubleshooting SystemSoft The SystemSoft’s CardSoft Card and Socket Services are loaded in the CONFIG.SYS file and generally include the following lines: DEVICE=C:CARDSOFTSOCKET_SERVICES_DRIVER (This file varies by machine type) DEVICE=C:CARDSOFTCS.EXE DEVICE=C:CARDSOFTCSALLOC.EXE C:CARDSOFTCSALLOC.INI DEVICE=C:CARDSOFTCARDID.EXE ( ...

  • Intel PRO - page 108

    102 CHAPTER 4 C Reboot the machine by turning off the power and turning it back on again (cold boot). If the driver still fails to load, the cause is generally a resource conflict. Common causes of resource conflicts include sound systems, other PC Card adapters, and built in ROMs. The resources required for a PRO/100 CardBus adapter include a memo ...

  • Intel PRO - page 109

    103 Troubleshooting 5 CC000 11 320 6 D2000 15 320 7 CC000 15 320 8 D2000 5 340 9 CC000 5 340 10 D2000 10 340 11 CC000 10 340 12 D2000 11 340 13 CC000 11 340 14 D2000 15 340 15 D2000 15 340 The driver loaded successfully, but I can’t get on the network A Check all connections and verify that the cable drop is good (try a cable that is known to wor ...

  • Intel PRO - page 110

    104 CHAPTER 4 E If the problem persists, and you’re on a 10BASE-T network, try patching directly into the hub. If the adapter works when plugged directly into the hub, but not when attached via a longer cable run, verify that the cable run length is within the IEEE 10BASE-T specification (100 meters). If the cable length is correct, the adapter m ...

  • Intel PRO - page 111

    105 Troubleshooting 86 LOADING NDIS DATA LINK... 89 PERFORMING NETBIND... 92 LOADING SCHEDULER... 93 LOADING DNP... 94 LOADING REDIRECTOR... 95 SETTING COMPUTER NAME... 98 NETWORK LOADING COMPLETED SUCCESSFULLY Use /~# parameter when you run Pathworks SETUP. This will allow you to see any error messages given by any driver that fails to load. 1 If ...

  • Intel PRO - page 112

    106 CHAPTER 4 3 If everything loads and you don’t connect to the network, try the following a Choose another INT setting. b Verify that you have a good cable. c Verify that you have excluded the memory being used by the Intel adapter from the EMM386.EXE line of CONFIG.SYS. d Make sure you have M32ANDIS.EXE version 1.14 or above. e Always do a col ...

  • Intel PRO - page 113

    107 Troubleshooting Put a copy of the directory for CAB files of Windows 95 from the CD- ROM on to your local hard drive. This will take up approximately 35MB of space. This will allow you to change settings on the system without using your CD-ROM. This also allows you to install Windows 95 without depending on the real mode SCSI CDROM driver. Inst ...

  • Intel PRO - page 114

    108 CHAPTER 4 6 The dialog box “Welcome to the PC Card (PCMCIA) Wizard” will ask the following question: “Are you using a PC card (networking card, CD-ROM connected to a SCSI card, etc.) to install windows?” The default answer is No. If you did use a PC Card SCSI adapter or a network card to install Windows 95, it is recommended that you ke ...

  • Intel PRO - page 115

    109 Troubleshooting e1 Let Windows 95 automatically find the drivers for you. This is recommended. To do this click the Next button 3 times. This lets Windows 95 automatically modify the following files: CONFIG.SYS, AUTOEXEC.BAT, and SYSTEM.INI e2 Choose the drivers yourself if none are selected. This is recommended only for experienced users. e3 O ...

  • Intel PRO - page 116

    110 CHAPTER 4 Manual Installation of the PRO/100 CardBus adapter under Windows 95 OSR2 1 Click the Start button in the lower left corner of the screen. 2 Choose the menu item: Settings. 3 Choose the menu item: Control Panel. 4 Double-click the System icon. 5 In the System Properties window, view the Device Manager tab. 6 In the Device Manager windo ...

  • Intel PRO - page 117

    111 Troubleshooting Card slot). 10 After Windows 95 OSR2 comes up and all drive activity has stopped, reinsert the Adapter in the same PC Card slot it was in previously. Click the Start button, select Settings, and then Control Panel. Double-click Add New Hardware. When asked, ‘Do you want Windows to search for your new hardware?’, select NO an ...

  • Intel PRO - page 118

    112 CHAPTER 4 Microsoft Windows for Workgroups This section describes general troubleshooting procedures and possible error codes you might encounter under Windows for Workgroups. Before doing anything else, check your configuration files against the sample files in Chapter 3, Configuration Reference of this document. Drivers load but you cannot se ...

  • Intel PRO - page 119

    113 Troubleshooting When using ODI for NetWare, I get attached to server, but can’t see the F: login drive, “drive not ready” is the error message you get when trying to login. There are several reasons that this will happen, but the most common reasons are: • DoubleSpace defaults to G or H as lastdrive, thus H: or I: will be the login driv ...

  • Intel PRO - page 120

    114 CHAPTER 4 Make sure your WINDOWSPROTOCOL.INI has proper bindings. The MS$NDISHLP and NETBEUI sections should have a BINDINGS=M32AMAC. Chances are, the binding statement is wrong. See the sample PROTOCOL.INI file. WFW works the first time I boot the machine, but after a warm boot, it fails to see other machines. Turn off the power to shut down ...

  • Intel PRO - page 121

    115 Troubleshooting If it is already excluded, try changing memory to CC000. Make sure to make corresponding changes in the EMM386.EXE exclusion parameter in the CONFIG.SYS. For example: x=cc00-cdff 5 Try swapping cards or cables whenever possible during troubleshooting. 6 Always do a COLD BOOT during troubleshooting. Novell NetWare Invalid network ...

  • Intel PRO - page 122

    116 CHAPTER 4 • Read the README file on the floppy disk. It contains important information (including known incompatibilities and machine specific issues) that may solve your problem. • Obtain current versions of drivers for your adapter from the Intel BBS or http://support.intel.com • Boot the computer in a clean environment (press F8 or hol ...

  • Intel PRO - page 123

    117 Troubleshooting • Make sure that the Intel adapter is not conflicting (interrupt, memory address, I/O address) with any other adapters or hardware that is installed in the computer (including sounds cards, CD-ROM drives and PEN devices). • Try loading the CardBus drivers at different memory locations (i.e.: C800, CC00, D400, D800). • Try ...

  • Intel PRO - page 124

    118 CHAPTER 4 ...

  • Intel PRO - page 125

    119 World Wide W eb & Intel Bulletin Board Internet FTP Service (BBS) Access Intel’ s World Wide Web Use Intel’ s BBS. Dial home pages or download in by modem at 8-N-1, information using anonymous FTP . and up to 14.4 Kbps. T roubleshooting ✓ ✓ ✓ ✓ ✓ Software updates ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Installation notes ✓ ? ...

  • Intel PRO - page 126

    120 Intel Web and Internet Sites Support: http://support.intel.com News: news://cs.intel.com Network Products: http://www.intel.com/network Corporate: http://www.intel.com FTP Host: ftp.intel.com FTP Directory: /pub/support/enduser_reseller/etherexpress_lan_adapters Intel Customer Support Technicians Other support services: You can purchase a range ...

  • Intel PRO - page 127

    121 Appendix B Specifications General Specifications Model MBLA3200 Cable: 100Base-TX unshielded twisted pair for use on Category 5 (data grade) cabling; 10Base-T unshielded twisted pair (UTP) Connector: RJ-45 Operating Distance: 328 ft (100 m) Ethernet specifications Ethernet IEEE 802.3 for 10 Mbps, 802.3u for 100 Mbps Type II CardBus PC Card Full ...

  • Intel PRO - page 128

    122 APPENDIX B General Specifications (continued) Temperature Range: Operating: 32°F to 131°F (0°C to 55°C) Storage: -4°F to 149°F (-20°C to 65°C) Humidity: 95% max. noncondensing LEDs: Link integrity, transmission activity Certification: FCC Code of Federal Regulations, Title 47, Part 15, Subpart B, Class A CE Mark (EN55022, Class A, EN500 ...

  • Intel PRO - page 129

    123 Specifications T echnical Specifications • Supports Toshiba ToPIC 95, Texas Instruments PCI 1130 and PCI 1131, Cirrus Logic CL-PD 6832 and Ricoh. • Variable interrupts, 3 to 15. • Variable I/O window, 128 bytes needed. • Requires only a 4Kbyte memory window on a 4Kbyte bound- ary, within segment C000h to EF00h (DOS drivers only). • Ke ...

  • Intel PRO - page 130

    124 APPENDIX B ...

  • Intel PRO - page 131

    125 Intel warrants to the original owner that the hardware product delivered in this package will be free from defects in material and workmanship. This warranty does not cover the product if it is damaged in the process of being installed or improperly used. THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY ...

  • Intel PRO - page 132

    126 APPENDIX C Returning a defective product From North America: Before returning any product, contact Intel Customer Support and obtain a Return Material Authorization (RMA) number by calling +1-916-377-7000. If the Customer Support Group verifies that the product is defective, they will have the RMA department issue you an RMA number to place on ...

  • Intel PRO - page 133

    127 Limited Lifetime Hardware Warranty Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. Software provided with the hardware product is not covered under the hardware warranty described above. See the applicable software license agreement which shipped with th ...

  • Intel PRO - page 134

    128 APPENDIX C ...

  • Intel PRO - page 135

    129 BY USING THIS SOFTWARE, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT. DO NOT USE THIS SOFTWARE UNTIL YOU HAVE CAREFULLY READ AND AGREED TO THE FOLLOWING TERMS AND CONDITIONS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE SOFTWARE PACKAGE AND ANY ACCOMPANYING ITEMS. LICENSE: Intel Corporation (“Intel” ...

  • Intel PRO - page 136

    130 APPENDIX D TRANSFER: You may transfer the Software to another party if the receiving party agrees to the terms of this Agreement and you retain no copies of the Software and accompanying documentation. Transfer of the Software terminates your right to use the Software. OWNERSHIP AND COPYRIGHT OF SOFTWARE: Title to the Software and all copies th ...

  • Intel PRO - page 137

    131 Network Software License Agreement U.S. GOVERNMENT RESTRICTED RIGHTS: The Software and documentation were developed at private expense and are provided with “RESTRICTED RIGHTS.” Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR 52.227-14 and DFAR 252.227-7013 et seq. or its successor. EXPORT LA ...

  • Intel PRO - page 138

    132 APPENDIX D ...

  • Intel PRO - page 139

    133 Appendix E Regulatory Ag ency Notices FCC Compliance Statement This product has been tested and found to comply with the limits for a Class B computing de vice pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Installed correctly , it prob ...

  • Intel PRO - page 140

    APPENDIX E 134 NOTE This device complies with Part 15 of the FCC Rules. Operation is subject to the following tw o conditions: (1) This de vice ma y not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION If the device is changed or modified withou ...

  • Intel PRO - page 141

    135 Index Symbols 100Base-TX 1 10Base-T 1 15-pin connector 1, 4 A Ar tisoft LANtastic 26 installation 26 sample configuration files 60 troubleshooting 104 A T&T StarGR OUP installation 26 A utodetection of PC Cards 2 B Bany an VINES installation 26 sample configuration files 63 Bulletin Board 119 C Cab ling data grade 1 Card and Sock et Ser vic ...

  • Intel PRO - page 142

    136 INDEX troubleshooting 104 Def ault values 25 Device driv er 25 Diagnostic T est Utility parameters 82 Diagnostics 91 Driver par ameters 71 E Equipment, required 2 Error messages 94 Exclusion, memory 60 F FTP LANW atch installation 31 NDIS driver 32 P ack et driver 31 FTP PC/TCP 33 and NetW are 36 installation 33 P ack et driver 35 Full-duplex o ...

  • Intel PRO - page 143

    137 I N D E X manual 41 Microsoft Windows 21 Microsoft Windows f or Workgroups 21 Nov ell NetW are 21 Program, Xircom 21, 25, 44, 55 VLM shell 21 Installation, manual Windows 95 OSR2 110 Intel Web and Inter net Sites 120 L LAN Manager Ungermann-Bass Net/One 51 LANtastic, Ar tisoft 26 LANW atch, FTP 31 LED indicators 90 Loopback f ailure 104 M Manua ...

  • Intel PRO - page 144

    138 INDEX operating system 21, 25 software installation 25 NETX shell suppor t 21 Nov ell NetW are 47 and FTP PC/TCP 36 installation 21 troubleshooting 115 O ODI driver FTP PC/TCP 33 gener ic 37 Microsoft Windo ws for Workgroups 43 parameters 71 Wollongong P athW a y Access for DOS 52 OnNet with FTP PC/TCP 33, 34 OSR2 109, 110 P P ack et driver FTP ...

  • Intel PRO - page 145

    139 I N D E X S Sample files, configuration 60 Ar tisoft LANtastic 60 Bany an VINES 63 DEC P A THW ORKS 64 Windows f or W or kgroups 65 Self test 91 slots, PC Card 2 Software updates 119 SunSoft PC-NFS installation 48 Suspend/resume 58 SystemSoft Card and Sock et Ser vices 101 T T roub leshooting 89, 98 Ar tisoft LANtastic 104 checklist 116 DEC P A ...

  • Intel PRO - page 146

    140 INDEX ODI driver 44 removing old installation 46 with NetW are 44 Windows NT 18 W ollongong PathW a y Access installation 52 W ollongong PathW a y Access for DOS 52 NDIS driver 52 ODI driver 53 W or ld Wide Web 119 ...

Manufacturer Intel Category Network Card

Documents that we receive from a manufacturer of a Intel PRO can be divided into several groups. They are, among others:
- Intel technical drawings
- PRO manuals
- Intel product data sheets
- information booklets
- or energy labels Intel PRO
All of them are important, but the most important information from the point of view of use of the device are in the user manual Intel PRO.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Intel PRO, service manual, brief instructions and user manuals Intel PRO. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Intel PRO.

Similar manuals

A complete manual for the device Intel PRO, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Intel PRO by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Intel PRO.

A complete Intel manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Intel PRO - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Intel PRO, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Intel PRO, that we can find in the current document
3. Tips how to use the basic functions of the device Intel PRO - which should help us in our first steps of using Intel PRO
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Intel PRO
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Intel PRO in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Intel PRO?

Use the form below

If you did not solve your problem by using a manual Intel PRO, ask a question using the form below. If a user had a similar problem with Intel PRO it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)