English dropdown-ico

Manual Anton/Bauer DUAL 2722

15 pages 0.21 mb
Download

Go to site of 15

Summary
  • Anton/Bauer DUAL 2722 - page 1

    PowerCharger DUAL 2722 Charger / Power Supply OWNER’S MANUAL ...

  • Anton/Bauer DUAL 2722 - page 2

    ...

  • Anton/Bauer DUAL 2722 - page 3

    TABLE OF CONTENTS INTRODUCTION…………………………………………………………………....1 FEATURES…………………………………………………………………………..1 SAFEGUARDS………………………………………………………………………2 GROUNDING/EARTHING…………………………? ...

  • Anton/Bauer DUAL 2722 - page 4

    INTRODUCTION The DUAL 2722 is a simultaneous 2 position Interactive 2000 PowerCharger fast charger with 70 watt DC camera power supply. It incorporates all of the Logic Series circuits that are employed in ev ery Anton/Bauer charger. The InterActive charge programm ing provides all charge t erm inati on and protection routines for safe, reliable, c ...

  • Anton/Bauer DUAL 2722 - page 5

    SAFEGUARDS Power Sources: This unit was designed to operate at mains vol tages from 90 to 264 Volts AC, 50-60 Hz. Risk of Electrical Shock: Refer servicing to quali fied service personnel. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. GROUNDING/EARTHING IMPORTANT WARNING: THIS APPARATUS MUST BE EARTHED. To ensure saf ...

  • Anton/Bauer DUAL 2722 - page 6

    Charging As with all Anton/Bauer chargers, chargi ng with DUAL 2722 is fully automatic. M ount any Digital Logic Series or Logic Se ries battery to the DUAL 2722 and it will automatically determine the appropriate ch arge routine and execute it. Applications The DUAL 2722 will charge any Anton/Baue r Logic Series Gold Mount battery including model ...

  • Anton/Bauer DUAL 2722 - page 7

    Three Stage Charging Methodology In general, the DUAL 2722 will deliver a three stage charge routine to each battery. 1. Stage One will deliver a high rate charge matched to the capabilities of the battery (typi cally a one or two hour rate , depending on battery t ype). During this stage, six separate cutoff m ethods are in operation, sim ultaneou ...

  • Anton/Bauer DUAL 2722 - page 8

    LED Indications The DUAL 2722 has two sets of two LEDs (one red, one green) and one green st atus LED in the center. The green status LED indicates: Steady green – line voltage is present; Off – line voltage not present.. The red and green charge status LED’s indicat e the charging status of the battery. The following tab le identifies all of ...

  • Anton/Bauer DUAL 2722 - page 9

    1 - - - - - - - 2 - - - - - - - LCD Indications Each PowerCharger’s liquid crystal displa y (LCD) will display the status of each battery, as well as, important PowerCharg er operating indications. The fol lowing information expl ains the indications which appear in t he LCD. The levels of the LCD display on each Powe rCharger can be obtai ned by ...

  • Anton/Bauer DUAL 2722 - page 10

    DDM (DIAGNOSTIC/DISCHARGE MODULE) A standard feature with the DUAL 2722, the DDM completes a battery m anagement system, capable of testin g battery capacity and identifying battery anomalies before they appear in the field. The DDM will perform a standard or a 24 hour test . The standard test is a full charge-discharge-full charge routine , which ...

  • Anton/Bauer DUAL 2722 - page 11

    To Operate The DDM 1. Mount the battery to any position on the PowerCharger. When the PowerCharger has completed its communication with the battery, the ALTERNATING RED and GREEN LEDs will stop and the battery will begin its char ge routine. The battery information and position number will appear on the LCD display. (If the battery is already on th ...

  • Anton/Bauer DUAL 2722 - page 12

    “AUTOCAL” Feature When a DDM is installed in the PowerC harger, a special InterActive m ode is automatically enabled for DIGITAL batteries placed on the PowerCharger at any time. The PowerCharger will interrogate the status of the DIGITAL battery to determine whether the battery has receive d a “learning” cycle or “calibrate” cycle with ...

  • Anton/Bauer DUAL 2722 - page 13

    OPERATION AS DC CAMERA SUPPLY FROM MAINS The DUAL 2722 can operate cameras and camcorders using t he four pin camera output connector located on the back of the DUAL 2722. To power the camera, attach one end of the XLR4 accessory cable (available separately) to the DUAL 2722. Attach the other end to the “DC in” four pin XLR on the camera/camcor ...

  • Anton/Bauer DUAL 2722 - page 14

    FCC NOTICE This equipment has been tested and found to comply with the li mits for a Class A digital device pursuant t o Part 15 of the FCC Rules. These lim its are designed t o provide reasonable protection against harmful interference when the equi pment is operated in a comm ercial environm ent. Th is equipment generat es, uses, and can radiate ...

  • Anton/Bauer DUAL 2722 - page 15

    WARRANTY IMPORTANT: PLEASE MAIL WARRANTY REGISTRATION CARD WITHIN TEN (10) DAYS OF PURCHASE. We must ha ve this card on file with our Custom er Support Group to establish t his warranty. Proper registrati on will also enable us t o provide update inform ation on the battery syst em. All new Anton/Bauer products have been thoroughly tested and i nsp ...

Manufacturer Anton/Bauer Category Power Supply

Documents that we receive from a manufacturer of a Anton/Bauer DUAL 2722 can be divided into several groups. They are, among others:
- Anton/Bauer technical drawings
- DUAL 2722 manuals
- Anton/Bauer product data sheets
- information booklets
- or energy labels Anton/Bauer DUAL 2722
All of them are important, but the most important information from the point of view of use of the device are in the user manual Anton/Bauer DUAL 2722.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Anton/Bauer DUAL 2722, service manual, brief instructions and user manuals Anton/Bauer DUAL 2722. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Anton/Bauer DUAL 2722.

Similar manuals

A complete manual for the device Anton/Bauer DUAL 2722, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Anton/Bauer DUAL 2722 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Anton/Bauer DUAL 2722.

A complete Anton/Bauer manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Anton/Bauer DUAL 2722 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Anton/Bauer DUAL 2722, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Anton/Bauer DUAL 2722, that we can find in the current document
3. Tips how to use the basic functions of the device Anton/Bauer DUAL 2722 - which should help us in our first steps of using Anton/Bauer DUAL 2722
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Anton/Bauer DUAL 2722
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Anton/Bauer DUAL 2722 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Anton/Bauer DUAL 2722?

Use the form below

If you did not solve your problem by using a manual Anton/Bauer DUAL 2722, ask a question using the form below. If a user had a similar problem with Anton/Bauer DUAL 2722 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)