English dropdown-ico

Manual Airlink101 AWLL3025

25 pages 10.94 mb
Download

Go to site of 25

Summary
  • Airlink101 AWLL3025 - page 1

    1 Model # AWLL3025 User’s Manual V er . 1A ...

  • Airlink101 AWLL3025 - page 2

    2 Interference S t atement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interfer ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy a ...

  • Airlink101 AWLL3025 - page 3

    3 1. Introduction The Wireless USB Adapter (hereafter called USB adapter), compliant with IEEE 802.11b/g, is a high-efficiency wireless adapter for wireless networking at home, in office, or in public places. This USB adapt er connects directly to any USB-ready desktop/notebook computers, so that you can share files, printers, and high-speed access ...

  • Airlink101 AWLL3025 - page 4

    4 2. Installation Procedures 2.1 Inst all Utility Sof tware Note: Before installing the utility software, DO NO T insert the USB adapter into your computer. If the adapter is inserted al ready, Windows will detect the adapter and request for a driver. Click Cancel to quit the wizard and remove the adapter from your computer. Step 1 Insert the provi ...

  • Airlink101 AWLL3025 - page 5

    5 Ste p 3 When the welc ome screen appears, click Next. Ste p 4 Click Next to accept the default destination f older for the software or click Browse to manually s elect a different destination folder . ...

  • Airlink101 AWLL3025 - page 6

    6 Step 5 For Windows XP, click Continue Anyway at the Windows Logo Compatibility screen. For Windows 2000, click Y es at the Digital Signature screen. Step 6 Remove the Driver & Utility CD from your CD drive and then rest art your computer . ...

  • Airlink101 AWLL3025 - page 7

    7 2.2 Inst all Driver Note: In most cases, Windows will automatically install the driv er after the computer is restarted. If the Found New Hardware Wizard appears, follow the instructions below. The Found New Hardware Wizard will l ook different depending on your operating system. Follow the on-screen instructions to complete the installation. For ...

  • Airlink101 AWLL3025 - page 8

    8 For Windows 2000, click Yes at the Digital Signature screen. For Windows 98SE or ME, insert the Window s 98SE or ME CD if prompted to do so and click OK . Step 4 Click Finish . Restart the computer if you are prompted to do so. ...

  • Airlink101 AWLL3025 - page 9

    9 3. Configuring USB Adapter as a Wireless Client The USB adapter can be set to either Stat io n or Access Point Mode from the Mode drop-down menu. Stati o n mode is the default selection and should be selected if you want to connect to a wireless router/acce ss point or conduct peer-to-peer networking. T o open the utility , go to Star t , (All) P ...

  • Airlink101 AWLL3025 - page 10

    10 Step 1 Select the SSID of your wireless router/acce ss point from the Available Network list and click on the Connect this site button. Step 2 Verify that the adapter has adequate Signal Strength and Link Quality and then restart the computer. Mode : Select from St at i on or Access Point . For more information regarding Access Point, please ref ...

  • Airlink101 AWLL3025 - page 11

    11 Current Network Information : Displays the network information of the wireless router/access point that the USB adapter is currently connected to. More Setting : Click on this button to access the USB adapter ’s configuration settings, including WEP and WP A encryption settings. ...

  • Airlink101 AWLL3025 - page 12

    12 3.1 Configuring General Settings Click Change to configure the adapter ’ s General Connection Setting . Channel : This setting is for Access Point Mode only . Tx Rate : Select the desired transmission rate, or leave the default setting of Auto to allow the adapter to automatica lly select the optimum rate. SSID : Y ou can manually enter the SS ...

  • Airlink101 AWLL3025 - page 13

    13 3.2 Configuring Encryption Security Click WEP Encry ption Key Setting to configure the WEP settings. Click Change to configure the WEP Key Setting and then click Apply to save the settings. Note: The WEP Key settings must be identical to the WEP settings of the wireless router/access point you wish to connect to. Key Length : Select the appropri ...

  • Airlink101 AWLL3025 - page 14

    14 Key V alue : Enter the applicable key values. Up to four key values may be entered. Note the following rules when entering Key values: ‧ 64-bit key length requires 10 Hexadecimal characters (0-9, A-F) or 5 ASCII characters (any number or letter). ‧ 128-bit key length requires 26 Hexadecimal characters (0-9, A-F) or 13 ASCII characters (any n ...

  • Airlink101 AWLL3025 - page 15

    15 1. Select TKIP for Encryption, WP A PSK for Authentication Mode, and click Apply . 2. Click on WP A Encryption Setting and click Change . 3. Enter the appropriate passphrase in the Passphrase field under the Pre-shared Key section and click Apply . (The p assphrase must be ident ical to the passphrase set on your wireless router/access point and ...

  • Airlink101 AWLL3025 - page 16

    16 3.3 Configuring Profile After you have configured all the settings, you can save your settings as a profile so you don’t have to re-configure them the next time. T ype in a name for the profile in the Profile name field and click Save Current . T o load a profile, select the profile from the drop-down menu and click Load . T o delete a profile ...

  • Airlink101 AWLL3025 - page 17

    17 3.4 Advanced Settings Click on Advanced Setting from the More Setting window to configure the adapter ’s advanced settings. User Interface : select the language for the adapter ’s user interface. Power Consumption Setting : • Continuous Access Mode : provides the best signal throughput but least power save. • Maximum Power-Saving Mode : ...

  • Airlink101 AWLL3025 - page 18

    18 3.5 Information Click on Information from the More Setting window to view the driver and utility’s information. ...

  • Airlink101 AWLL3025 - page 19

    19 4. Configuring USB Adapter as an Access Point 4.1 Configuring Access Point You can configure the USB Ad apter as an access point for other wireless clients on your network. Note: You will not be able to access the Internet if you configure the USB adapter as an access point. To allow other wireless clie nts to access the Internet, you will need ...

  • Airlink101 AWLL3025 - page 20

    20 Click on Change to configure the settings. Channel : select the channel you want to use. Basic Rate : select the applicable transfer rate. Tx Rate : select from Auto to 54 Mbps. SSID : enter the desired SSID for the access point. Hide SSID (check box) : check to disable the broadcast of SSID. Tx Power : select the transmission signal power. Clic ...

  • Airlink101 AWLL3025 - page 21

    21 4.2 Configuring Encryption Security Select Enable from the WEP drop-down menu and click Setting . Key Length : Select the appropriate encryption key length. Default Key ID : Select which of the four Key V alue you want to use. Key Format : Select either Hexadecimal (0-9, A-F) or ASCII (any number or letter). Key V alue : Enter the applicable key ...

  • Airlink101 AWLL3025 - page 22

    22 4.3 Configuring MAC Address Filter Filter Type : Disable : disables MAC address filter. Accept : only accepts connection from the MAC address listed. (Connection attempts from MAC address not in the list will be rejected). Reject : only rejects connection from the MAC address listed. (Connection attempts from MAC address not in the list will be ...

  • Airlink101 AWLL3025 - page 23

    23 5. Appendix 5.1 Specifications Electrical Specifications Interface USB 2.0 S tandard, USB 1.1 Compliant St andards Conformance IEEE 802.1 1 / 802.1 1b / 802.1 1g, ARIB STD-T66 compliant Data Transfer Rate IEEE 802.1 1b ： 1 / 2 / 5.5 / 1 1Mbp s (a uto sensing) IEEE 802.1 1g ： 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54Mbps (auto sensing) Access Metho ...

  • Airlink101 AWLL3025 - page 24

    24 5.2 T roubleshooting A. If the utility cannot be opened or it reports that the adapt er is not found, uninst all the driver and utility and try inst alling again. Y ou can also verify if the driver is installed properly in the Device Manager . T o access the Device Manager , right-click on My Computer on your desktop, select Properties . Go to t ...

  • Airlink101 AWLL3025 - page 25

    25 For Windows 98SE/ME Step 1 Go to Start , Run , type winipcfg and click OK . Step 2 Select the adapter from the drop-down menu and click Release . Ste p 3 After the IP address is released, click Renew . Y ou should get an IP address like 192.168.x.y (where x and y are unique numbers assigned by your wireless router/access point). If you don’t g ...

Manufacturer Airlink101 Category Network Card

Documents that we receive from a manufacturer of a Airlink101 AWLL3025 can be divided into several groups. They are, among others:
- Airlink101 technical drawings
- AWLL3025 manuals
- Airlink101 product data sheets
- information booklets
- or energy labels Airlink101 AWLL3025
All of them are important, but the most important information from the point of view of use of the device are in the user manual Airlink101 AWLL3025.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Airlink101 AWLL3025, service manual, brief instructions and user manuals Airlink101 AWLL3025. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Airlink101 AWLL3025.

Similar manuals

A complete manual for the device Airlink101 AWLL3025, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Airlink101 AWLL3025 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Airlink101 AWLL3025.

A complete Airlink101 manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Airlink101 AWLL3025 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Airlink101 AWLL3025, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Airlink101 AWLL3025, that we can find in the current document
3. Tips how to use the basic functions of the device Airlink101 AWLL3025 - which should help us in our first steps of using Airlink101 AWLL3025
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Airlink101 AWLL3025
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Airlink101 AWLL3025 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Airlink101 AWLL3025?

Use the form below

If you did not solve your problem by using a manual Airlink101 AWLL3025, ask a question using the form below. If a user had a similar problem with Airlink101 AWLL3025 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)