English dropdown-ico

Manual Tandberg Data 600

126 pages 2.43 mb
Download

Go to site of 126

Summary
  • Tandberg Data 600 - page 1

    SDL T 600 Pr oduct Manual ...

  • Tandberg Data 600 - page 2

    SDL T 60 0 Pr od uc t Manu al ii Co pyri ght Copyri ght © 2004 by Quantum Corpo ration. All rig hts rese rved . Repri nte d with permis s ion by T andbe r g Data ASA. T rademarks T and ber g is a trade mark of T andbe rg Data ASA. Quant um, th e Quantum lo go, and t he DL Ttap e logo a re trade marks of Quant um Corporati on, regist e re d in the ...

  • Tandberg Data 600 - page 3

    SDL T 60 0 Pr od uc t Manu al iii Re visi on Hist o r y The tabl e bel ow list s all revis io ns made to this docum ent in chro nolo gical order . User Manual Statem ent s for Class A Equipment (Internal SDL T 6 00 T ape Drive System) This equ ipmen t genera tes, use s , an d may emit radio fre quen cy en ergy . The equipme nt has be en te s ted an ...

  • Tandberg Data 600 - page 4

    SDL T 60 0 Pr od uc t Manu al iv Attentio n! Ceci est un produ it de Class e A. Dans un envir onne m ent dom est ique , ce produ it risq ue de créer des inte rférenc es radioé lect riques , il appa rti e nd ra alors à l'u ti lis ate ur de prendre les mesu res spécifi que s approp rié es. User Manual Statem ent s for Class B Equipment ( T ...

  • Tandberg Data 600 - page 5

    SDL T 60 0 Pr od uc t Manu al v supp ression was used in the quali ficat ion test for th e device . This info rmation will vary from dev ice to devi ce and needs to be obt ained from the EMC (Electroma gne t ic Compat ibi lity) group or pro duct manag er . This Cla ss B digit al a ppar at us comp lie s with Ca nadi an ICES-003 . Cet ap pareil numé ...

  • Tandberg Data 600 - page 6

    SDL T 60 0 Pr od uc t Manu al vi ...

  • Tandberg Data 600 - page 7

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 vii Ta b l e o f C o n t e n t s 1 Int r o du c tio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -1 Pur pos e a nd S co pe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Re fere nce d D ocu ...

  • Tandberg Data 600 - page 8

    T able of Cont en ts SDL T 60 0 Pr od uc t Ma nu al vi ii Mar c h 20 04 8 1-8 1 18 4- 02 REV A01 Sup er DL Tt ape II Da t a Car tri dge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Qu ant um Dia gnos ti cs T o ols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Tandberg Data 600 - page 9

    SDL T 60 0 Pr od uc t Ma nu al T a bl e of Con t en t s 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 ix 4 Inst alli ng Y ou r T a pe Dr iv e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 W ar rant y No te . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ...

  • Tandberg Data 600 - page 10

    T able of Cont en ts SDL T 60 0 Pr od uc t Ma nu al x Mar c h 20 04 81- 8 1 184- 02 REV A01 Wh en to Use the Cl eani ng T ape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Lif e Ex pe cta ncy of the C l eani ng T ape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Tandberg Data 600 - page 11

    81 -81 1 84-0 2 R EV A0 1 M arch 20 04 xi List of T ab les 1 Int r o du c tio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 -1 T abl e 1- 1. T ypographical Conventio ns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 3 SD L T 6 0 0 T ape Driv e Sp ecif ica t io n ...

  • Tandberg Data 600 - page 12

    Li st of T abl es SDL T 60 0 Pr od uc t Ma nu al xi i Mar c h 20 04 8 1-8 1 18 4- 0 2 REV A 01 4 Inst alli ng Y ou r T a pe Dr iv e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 T ab le 4 -1. SC SI I D A dd ress Sel ec tion s (G rap hic al F orm at ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -7 T ab le 4 -2. SC ...

  • Tandberg Data 600 - page 13

    81- 81 1 84-0 2 R EV A0 1 M arch 2004 x iii Li st of Fig ures 2 SD L T 6 0 0 T ap e Dr iv e Prod uc t Inf o rm a t io n . . . . . . . . . . . . . . . . 2-1 Figure 2-1. SDL T 600 T ape Drive Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Figure 2-2. SDL T 600 T ape Drive Modular Design . . . . . . ...

  • Tandberg Data 600 - page 14

    Li st of Fi gures SDL T 60 0 Pr od uc t Ma nu al xi v Mar c h 20 04 8 1-8 1 18 4- 0 2 REV A 01 A Su pe r D L Tt ap e I a n d Su p er D L Tt ape I I Da ta C a rt ri dg es . . . . . . A -1 Figure A-1. Super DL Ttape Data Cart r idges Read by SDL T 600 T ape Drive . . . . . . . . . . . . . . . . . A-2 Fig ure A- 2. Bott om V i ew of S upe r DL Tt ape ...

  • Tandberg Data 600 - page 15

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 1-1 C HAPT ER 1 Int rod uc ti on This c hapte r provide s su pplementar y informati on a bout using the SDL T 600 t ape dri ve system Pr oduct Manual . The chapter di scusses t he followi ng topics: • “Purpo se and Scope” describ es the type of infor mation found in the manual , an d its inte nded use ...

  • Tandberg Data 600 - page 16

    Ref ere nced Do cum ents SDL T 60 0 Pr od uc t Ma nu al 1-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 1.2 Referen ced Do cuments • SDL T 600 Fibr e Channe l Inter fac e Guide (81-81 202- 01) • SDL T 600 SCSI Interfac e Guide (81-81200- 01) • SDL T 600 Design and Integr ation Guide (8 1-8 1 196-01) • Super DLT tape™ Inte ractiv e Library Inte ...

  • Tandberg Data 600 - page 17

    SDL T 60 0 Pr od uc t Ma nu al Chapte r 1: Introd uction 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 1-3 • Appendix B , “DL Tt ape VS1 Data Cart r idge, ” pr ovides i nformat ion for the DL Ttape™ VS data cart ridge inclu ding handling a nd inspe ction pr ocedur es, informati on on the write -pro te ct switch, and how t o l oad and unload a da ...

  • Tandberg Data 600 - page 18

    Re ad er C omm ent s SDL T 60 0 Pr od uc t Ma nu al 1-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 1.7 Reader C omments T andbe r g i s committed to providing the best produc ts a nd service . W e encourage your comments, sugges tions , and cor rection s for this m anual. Pleas e se nd all commen ts to this addr ess: T andbe r g Data A SA Kj e ls ås v ...

  • Tandberg Data 600 - page 19

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-1 C HAPT ER 2 SDL T 600 T ape Drive Prod uct Inf ormatio n This chapte r descr ibe s the featu res of the SDL T 600 tape driv e syst em. This c hapt er covers the foll owing topi cs: • “Over view ” describes ba sic feat ures of the sys tem. • “Pro duct Featu res” lists key f eatur es of the SDL ...

  • Tandberg Data 600 - page 20

    Pr od uc t Fea t ures SDL T 60 0 Pr od uc t Ma nu al 2-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 Fi gure 2- 1. SDL T 600 T ape Drive S ystems 2.2 Product F eatures The SDL T 600 tape drive syste m of f er s the foll owing pr oduct fea tur es: • A st reamin g tap e dri ve that use s hal f-inch wide Supe r Digi t al L inear T ape (Super DL Ttape II) ...

  • Tandberg Data 600 - page 21

    SDL T 60 0 Pr oduc t Ma nual C hap ter 2: SD L T 600 T a pe Dri ve Pro du ct In form ati on 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-3 • The SDL T 600 tape drive is avail able in eithe r Ultra 160 or Fibre Channel inte r face versions . (Fibr e Channel not avai la ble with the table top model). For more infor mation on the SDL T 600 tape drive ...

  • Tandberg Data 600 - page 22

    T ape Driv e T e chno logy SDL T 60 0 Pr od uc t Ma nu al 2-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 2.3.3 M a g neto Resistiv e Cluster H e ad s Magneto Resi stiv e Cluste r (MRC) heads are a densely packed array of small, cost- ef f ect ive Magneto Resisti ve (MR) tape he ads p recise ly positi one d using a dvanc ed thin-f ilm pr ocessing techn o ...

  • Tandberg Data 600 - page 23

    SDL T 60 0 Pr oduc t Ma nual C hap ter 2: SD L T 600 T a pe Dri ve Pro du ct In form ati on 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-5 2.4 Modula r D e sign The SDL T 600 tape drive is designed as a total syste m. The system includ es a complex interact ion of a number of importa nt components including suc h items as the tape path, tape heads, m ...

  • Tandberg Data 600 - page 24

    Modu lar Desi gn SDL T 60 0 Pr od uc t Ma nu al 2-6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 2.4.1 Data Control M odu le The Data Contro l Module (DCM) contain s sever al of the functio ns and feature s of the LGMR technolo gy , which is at the heart of the SDL T technolog y . Of the fi ve technologi es that consti tute the LGMR technol ogy , two are ...

  • Tandberg Data 600 - page 25

    SDL T 60 0 Pr oduc t Ma nual C hap ter 2: SD L T 600 T a pe Dri ve Pro du ct In form ati on 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-7 Base Plat e The SDL T 600 tape dr ive ba se pl at e is a n a luminum die ca stin g with precis ely mac hined sur f aces. The casting act s as the suppor t pla tfor m for the othe r modules and for the tape drive e ...

  • Tandberg Data 600 - page 26

    Modu lar Desi gn SDL T 60 0 Pr od uc t Ma nu al 2-8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 2.4.4 Electr o nic Interface Module The Elect ronic Inte r face Module (EIM) is the electr oni c heart of the SDL T 60 0 tape drive syst em. It provi des the main contr ol fun ction for the syste m and the interface from the system to the host compute r , l ib ...

  • Tandberg Data 600 - page 27

    SDL T 60 0 Pr oduc t Ma nual C hap ter 2: SD L T 600 T a pe Dri ve Pro du ct In form ati on 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 2-9 2.5 Quant um Diagnost ics T ools Quantum, the manuf acture r of your drive, f r equent ly provide s new and updat ed tool s to use with its tape dri ves. These tool s inc l ude such ite ms as upgrades for produc t ...

  • Tandberg Data 600 - page 28

    Medi um Auxi li ary M emo ry SDL T 60 0 Pr od uc t Ma nu al 2-1 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 2.7 Medium Aux iliary Memory Medium Auxili ary Memory (MAM) is a feature in the SDL T 600 tape drive tha t produ ces vari ous attrib utes about the data cart ridge and re cord s t hem in a l og fi le on the media it self. Thes e a ttribut es prov ...

  • Tandberg Data 600 - page 29

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-1 C HAPT ER 3 SDL T 600 T ape Drive Specif ication s This chapte r descr ibe s various specif ica tions tha t apply to the SDL T 600 tape drive syste m: • “Produ ct Specific a tions ” provide s tape drive spe cifi catio ns • “Func tional Speci ficatio ns” p rovide s functi ona l sp ecific ation ...

  • Tandberg Data 600 - page 30

    Pr od uc t Spec i fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 Ult ra 16 0 SC SI I nte rfa c e The Ultra 160 SCSI int e rface pr ovi des a l ow- voltage di ffe renti al (L VD) mode r unning u p to 160 MB/second and a single - ended (SE) mode runni ng up to 40 MB/second. N OTE : The host computer ’ s SCSI co ...

  • Tandberg Data 600 - page 31

    SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-3 In SE mode, the SCSI bus can support up to 7 device s using c able lengths up to 3 m e ters. In L VD mode, the SCSI bus can sup port up to 15 de vices usi ng cable l engths up t o 2 5 meters. For m ore information about ...

  • Tandberg Data 600 - page 32

    Pr od uc t Spec i fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 3.1.3 Phys ic al Dimensi o ns an d W eights Ta b l e 3 - 3 provides phy sical di mensions f or t he SDL T 600 tape d r ive syst e m. Ta b l e 3 - 4 shows the weights of the S DL T 600 t a pe dr ive. 3.1.4 Compression The tape drive contain s on-bo ...

  • Tandberg Data 600 - page 33

    SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-5 3.1.5 Stor age Capacity Ta b l e 3 - 5 provi des nati ve and compresse d capac ity r anges for the Super DL Ttape II data cartridge : In accord ance with industry prac tice , a typical compression rati o of 2:1 is quote ...

  • Tandberg Data 600 - page 34

    Pr od uc t Spec i fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 3.1.7 Maximum Data T rans fer Rate Ta b l e 3 - 7 shows the maximum sust ained ( and bur st) data transf er rates for the SDL T 600 tape d r ive. N OTE : Cable leng ths and cabl e type may l imit a ttaina ble tra nsfer rat e; for de tails , refer ...

  • Tandberg Data 600 - page 35

    SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-7 3.1.9 Media Durabili ty Ta b l e 3 - 8 shows the number of media pa sses a nd f ull media u ses to expect fr om a Super DL Ttape II data car tridge . 3.1.10 Data Cartridge Life Expectancy Ta b l e 3 - 9 shows the number ...

  • Tandberg Data 600 - page 36

    Fun cti onal Speci fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 3.2 F unct ional S pecification s The following subsections c ontain f uncti ona l sp ecifica tions for t he SDL T 600 tape dri ve. 3.2.1 Pe rformance Data Ta b l e 3 - 1 0 p rovide s performa nce dat a for the SDL T 600 tape drive system. For a ...

  • Tandberg Data 600 - page 37

    SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-9 3.2.2 Shock and Vibration Specifications The following table s pr ovide non- ope rati ng and operati ng shoc k and vibration spe c ific ati ons for the SDL T 600 tap e dr ive sy stem. T a ble 3-1 1 . Non-Operating Shoc ...

  • Tandberg Data 600 - page 38

    Fun cti onal Speci fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-1 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 T a ble 3-1 4. Non-Operating V i brati on Spe ci ficati ons (Package d) V i bration (Packaged) T ype Ra ndom Fre que ncy Range T ruck P ro file* (0.5 Gr ms) Air Profile * (1.0 Grms) Ap plica tio n X, Y , Z ax es ( 30 m inu tes, each pr ofil e a ...

  • Tandberg Data 600 - page 39

    SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3-1 1 3.2.3 Cu rrent and P ower Requirement s T abl e 3-16 on p age 3-12 lists th e current and powe r requi rement s for the two versio ns of the SDL T 600 tape dr ive syst e m (in ternal and tablet op) c onfigure d wi th ...

  • Tandberg Data 600 - page 40

    Fun cti onal Speci fic atio ns SDL T 60 0 Pr od uc t Ma nu al 3-1 2 Mar c h 20 04 81- 8 1 184- 02 REV A01 T a ble 3-1 6. Current and Power Requirements (SCS I Inte rfa ce) Mode 5 V Curre nt (A) MaxPk 1 Max Mea n 2 Ty p 3 12 V Cu rren t (A) Ma xP k 1 Ma xM ean 2 Ty p 3 DC Power (W) Max 4 Ty p 5 AC Power (W) Max 6 Ty p 7 S tandby /Idl e 2.6 2.6 2.4 0 ...

  • Tandberg Data 600 - page 41

    SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3 -13 T a ble 3-1 7. Current and Power Requirements (Fibr e Channel Inte rfa ce) Mode 5 V Curre nt (A) MaxPk 1 Max Mea n 2 Ty p 3 12 V Cu rren t (A) Ma xP k 1 Ma xM ean 2 Ty p 3 DC Power (W) Max 4 Ty p 5 AC Power (W) Max 6 ...

  • Tandberg Data 600 - page 42

    Env ironm ent al S p ecif i cati on s SDL T 60 0 Pr od uc t Ma nu al 3-1 4 Mar c h 20 04 81- 8 1 184- 02 REV A01 3.2.4 SDL T 600 T ape Drive System Recordi ng Method The SDL T 600 tape drive syste m uses the Part ial Response Maximum Likel ihood (PRML) 32/33 encoding metho d for read ing/writ ing S DL T 600 tape drive form at. It uses the same algo ...

  • Tandberg Data 600 - page 43

    SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3 -15 3.3.2 T emperature and Humidity The ambient ope rati ng environm ent for the tape dri ve may not excee d the limits shown in Ta b l e 3 - 1 8 . (The s pe cifica tions shown in the ta ble ar e va lid f or bot h the int ...

  • Tandberg Data 600 - page 44

    Re cord ing Me di a Spec i fic at ions SDL T 60 0 Pr od uc t Ma nu al 3-1 6 Mar c h 20 04 81- 8 1 184- 02 REV A01 3.3.4 Altitude Both the inte rnal and table top tape drive s opera te in normal pressur es from –500 to 10,000 fee t when opera ted wit hin the amb ient o pe rating environm ents s pe cified in Secti on 3.3 .2, “T em perature and Hu ...

  • Tandberg Data 600 - page 45

    SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3 -17 Fi gure 3- 1. Mu ltiple L aye rs Co mprise Super DL Ttap e II M edia 3.4.2 Physical Data Cartridg e A durable plast ic c as e encloses the Super DL Ttape II media, as shown in Figure 3- 2 . Fi gure 3- 2. Supe r DL Tt ...

  • Tandberg Data 600 - page 46

    Re cord ing Me di a Spec i fic at ions SDL T 60 0 Pr od uc t Ma nu al 3-1 8 Mar c h 20 04 81- 8 1 184- 02 REV A01 3.4.3 Media Shipping, Operating, an d Storage Spec ificati ons Ta b l e 3 - 2 1 descr ibes the opt im um media shi pping c ondit ions. Ta b l e 3 - 2 2 descr ibes the opt im um media operat ion conditi ons. Ta b l e 3 - 2 3 descr ibes t ...

  • Tandberg Data 600 - page 47

    SDL T 60 0 Pr oduc t Ma nual Ch apte r 3: S DL T 600 T ap e Dr iv e Spe cific atio ns 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 3 -19 3.4.4 Backward-Read Compatibility T ransfer Rates The SDL T 600 tape drive syste m featur e s a backward- rea d compatibil ity (BRC) mode. When in BRC mode, the SDL T 600 tape drive is capabl e of rea ding SDL T 220 a ...

  • Tandberg Data 600 - page 48

    Re cord ing Me di a Spec i fic at ions SDL T 60 0 Pr od uc t Ma nu al 3-2 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 ...

  • Tandberg Data 600 - page 49

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-1 C HAPT ER 4 Inst alling Y our T ape D rive This chapte r descr ibe s how to install the SDL T 600 tape drive. This inc lud e s conf igura tion jum per sett ings, connec tor pin ass ignment s, installation inst ructions, power and sig nal cabling desc ription s, and operati ng i nstr uc tions . This chapt ...

  • Tandberg Data 600 - page 50

    Safet y , Ha ndling , and ES D Pro tection SDL T 60 0 Pr od uc t Ma nu al 4-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 Generall y , the Li mited Prod uct and Limite d Repair W arranti es are continge nt upon pr oper use in the appli cati on for whic h the product is inte nde d; and do not cover the product if you perform any of the foll owing acti ons ...

  • Tandberg Data 600 - page 51

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-3 4.2.2 Handli ng Damage t o the SDL T 600 tape driv e syst e m can oc cur as t he r esult of c areless handling, vibra tion, shock, or ele ctros ta tic disc har ge (ES D). For more details a bout ESD, refer to “El ectrost atic ...

  • Tandberg Data 600 - page 52

    Pr e-I n sta llati on Gu id eli nes SDL T 60 0 Pr od uc t Ma nu al 4-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 T o minimiz e the possibi lity of ESD-r el ated damage to the system, the drive’ s manufact urer str ongly recommends using both a worksta tion a nti-stati c mat and an ES D wri st s trap. Whe n correctl y installe d and properly used, t h ...

  • Tandberg Data 600 - page 53

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-5 The Model Number is a c har acter st r ing usually beginnin g with t he lett e rs “TR.” Mo d e l N u mb e r: T R The S erial Nu mber i s a ch aracter stri ng beg inning with the letter s “R B.” Seri al Nu mber: RB 3. Ch ...

  • Tandberg Data 600 - page 54

    Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 4.4.1 Settin g the Inte rnal T ape Drive SC S I ID Each de vice on th e SCSI bus must ha ve a u nique SCSI I D addre ss assigned to it. F or sp e cific recommenda tion s for a ss igning SCSI I Ds, r efe ...

  • Tandberg Data 600 - page 55

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-7 N OTE : T he co mputer system an d the t ape drive SCSI IDs a re onl y ch ecked at power - o n. T o change the SCSI ID after installa tion , powe r of f both the system an d th e tape d riv e, ch ange th e t ape drive ’ s SCS ...

  • Tandberg Data 600 - page 56

    Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 T a ble 4-2 . SCSI ID Ad dr es s S e le cti o ns (T abu la r Form at) SCSI ID Jumper Acr o s s Pins 9- 10* 7-8 5-6 3-4 1-2 010000 110001 210010 310011 410100 5 ( d e f a u l t ) 00000 610110 710111 8110 ...

  • Tandberg Data 600 - page 57

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-9 4.4.2 Configuring the Internal T a pe Drive for TER MP WR Y ou m ust te r minate a SCSI bus at each end of the bus. T er minate al l signa ls not de fined as RESER VED, GROUND, or TER MPWR exactl y once at eac h e nd of th e bu ...

  • Tandberg Data 600 - page 58

    Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-1 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 Figure 4- 4 shows two pers pecti ve vie ws of the inte rna l tape dr ive . Fi gure 4- 4. SDL T 600 T ape Drive—Fr ont and R ear V iews Securing the Inte rnal T ape Drive This s e ction de scr ibes h ...

  • Tandberg Data 600 - page 59

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4-1 1 Fi gure 4- 5. Intern al T ape Drive Mount ing Locati ons – Front, Side, a nd Botto m Di mension s Connec ting the Internal T ape Drive Cables This s e ction di scusses t hree conne ctor s on t he back of the i nternal SDL T ...

  • Tandberg Data 600 - page 60

    Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-1 2 Mar c h 20 04 81- 8 1 184- 02 REV A01 SCSI and Power Connectors Figure 4-6 on page 4-13 shows t he pin orie ntati on for the 68-pin SCSI connect or a nd 4-pin p ower connec tor l oc ated on the back of the in ternal tape drive . The table ...

  • Tandberg Data 600 - page 61

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -13 Fi gure 4- 6. Connectors on the Back Panel of SDL T 60 0 T ape Driv e T a ble 4-3 . M SE and SE Mode S CSI Conne ctor Pin Assignme nts Signal Name Pin N umb er Pin Nu mbe r Si gn al N am e Ground 1 35 -DB( 12) Ground 2 36 -DB ...

  • Tandberg Data 600 - page 62

    Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-1 4 Mar c h 20 04 81- 8 1 184- 02 REV A01 Ground 10 44 -DB( 4) Ground 1 1 45 -DB( 5) Ground 12 46 -DB( 6) Ground 13 47 -DB( 7) Ground 14 48 -DB( P0) Ground 15 49 Ground D I F F S E N S 1 65 0G r o u n d T E R M P W R 1 75 1T E R M P W R T E R ...

  • Tandberg Data 600 - page 63

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -15 T a ble 4-4 . M SE L VD Mode SCSI Conne ctor Pin Assign ments Signal Name Pin N umb er Pi n Nu mbe r Si gn al N am e +DB(12) 1 35 -DB( 12) +DB(13) 2 36 -DB( 13) +DB(14) 3 37 -DB( 14) +DB(15) 4 38 -DB( 15) +DB( P1) 5 39 -DB( P ...

  • Tandberg Data 600 - page 64

    Confi gurin g and In stallin g an In ternal T a pe Dri ve wi th SCSI Interf ace SDL T 600 Product Manu al 4-1 6 Mar c h 20 04 81- 8 1 184- 02 REV A01 +C/D 28 62 -C /D +REQ 29 63 -REQ +I/O 30 64 -I/O +DB(8) 31 65 -DB( 8) +DB(9) 32 66 -DB( 9) +DB(10) 33 67 -DB( 10) + D B ( 1 1 ) 3 46 8- D B ( 1 1 ) T a ble 4-5 . 4-Pin Power Connector Pin Assignments ...

  • Tandberg Data 600 - page 65

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -17 4.5 Conf iguring a n d Installing an I nternal T ape Drive with Fibre Channel Interface This s e ction pr ovi des in formati on for co nfigur ing and in stallin g a t a pe dr ive wit h t he F ibre Ch annel inter face in to a ...

  • Tandberg Data 600 - page 66

    Co nf ig uring and Inst al li ng an I nt erna l T ape D riv e with Fib re C h ann el Int erfac e SD L T 600 Pro du ct Man ua l 4-1 8 Mar c h 20 04 81- 8 1 184- 02 REV A01 Fi gure 4- 7. SDL T 600 Fibre Channel Connector s a nd Jumpers Follo w these steps to connec t a Fibr e Channel tape drive: • Secure th e tape drive . • Connect th e powe r . ...

  • Tandberg Data 600 - page 67

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -19 Because of the variety of mountin g possibil ities f or tape d rives, the instruc tions prese nted he re a re gener al in nature . Use them only as a guide for mounting the ta pe drive in your syst em. Mount the tape dri ve i ...

  • Tandberg Data 600 - page 68

    Co nf ig uring and Inst al li ng a T a bl et op T ape D r iv e SD L T 600 Pro du ct Man ua l 4-2 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 4.5.5 Conn ec t the Fi bre Channel Ca ble 1. Fibre Chan nel c ables a re “hot-swa ppable ”—meaning y ou may connect and disconnect t hem wi th unit power on. The r efore , unlik e other syste ms, the tape dr ...

  • Tandberg Data 600 - page 69

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -21 4.6.1 Configuring the T ape Drive Figure 4-9 on page 4-21 shows t he location of the c ontrols and connector s for the tabletop tape drive . This model of tape drive is normally c onf igure d to meet customer specif ica tion ...

  • Tandberg Data 600 - page 70

    Co nf ig uring and Inst al li ng a T a bl et op T ape D r iv e SD L T 600 Pro du ct Man ua l 4-2 2 Mar c h 20 04 81- 8 1 184- 02 REV A01 Fi gure 4- 10 . SCSI ID Selector Switch for the SDL T 600 T a pe Dri ve T abletop Mod el TE RMP WR The factor y preconfigur es t he TER MPWR sett ing for the t abletop t a pe dr ive a ccordi ng t o sp ecific cust ...

  • Tandberg Data 600 - page 71

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -23 bus cable betwe e n the ope n c onnect or and t he next devic e o n the bus. Figur e 4-1 1 ill ustra tes the se two connec tion method s. Figure 4-1 1. Cabling Op tions for t he SDL T 600 T ape Drive T abletop Model 1. Prior ...

  • Tandberg Data 600 - page 72

    Co nf ig uring and Inst al li ng a T a bl et op T ape D r iv e SD L T 600 Pro du ct Man ua l 4-2 4 Mar c h 20 04 81- 8 1 184- 02 REV A01 AC Power Cable An AC power cord is supplied with eac h tablet op unit. Carefully ins pe ct the power cord and ensure that the cord is the appropria te cord for your countr y or region based on the crite r ia below ...

  • Tandberg Data 600 - page 73

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 4: Ins tal l ing Y our T ape Dr iv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 4 -25 The tabl e to p unit power s upply h a s an aut o-s ensing f e ature; it requires no a djus tment or switch se tt ing chang es for differe nt AC sour ces. Refer t o Figure 4- 9 and Figur e 4-12 . Connect one end of the AC cor ...

  • Tandberg Data 600 - page 74

    Con firmi ng the Instal latio n SDL T 60 0 Pr od uc t Ma nu al 4-2 6 Mar c h 20 04 81- 8 1 184- 02 REV A01 ...

  • Tandberg Data 600 - page 75

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-1 C HAPT ER 5 Using Y o ur T ape Drive This c hapte r desc ribe s h ow to st a rt usin g your SDL T 600 tape driv e syst e m. This include s making a tri al back- up, cl eaning the tape mechanis m, and variou s troublesho oting i nforma tion. This chapter also incl udes inform at ion on the LEDs and button ...

  • Tandberg Data 600 - page 76

    Power-On S e lf-T e s t SDL T 60 0 Pr od uc t Ma nu al 5-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 During this time, if a host tri es to negotiate Synchr onous or W id e tra nsfers, the SDL T 600 tape dri ve syste m negotiate s to Async hronous or Narrow . It may take longer than the durat ion of POST for the tape dri ve to become ready . Ta b l e 5 ...

  • Tandberg Data 600 - page 77

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-3 5.2 P erfo rmin g a T rial Back-up Complet e the following ste ps to pe rform a trial ba ck up and verify correc t tape drive insta llati on: • Inser t a data cartrid ge. Push the dat a cartr idg e co mplete ly int o th e syst em. ...

  • Tandberg Data 600 - page 78

    Upda ting th e Firm wa re SDLT 600 Prod uct Ma nu al 5-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 5.3.1 Upd ate the Fir m ware Usi ng the SC SI Bus Quantum p r ovides up gr ades for product s oftware and fir mware that may be ne wly deve loped. These upd at es a re ava il ab l e on Quan tum’ s we b sit e . N OTE : T hese t ools are on ly a v ailable ...

  • Tandberg Data 600 - page 79

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-5 5.3.3 Using a CUP/FUP Data Cartri dge Foll ow t hese st eps to use a CUP /FUP dat a car t ridge: 1. V erify tha t the tape drive is t urn ed on (power is a ppl ied), and the middle (Drive S ta tus) LED on the front pa nel of the tap ...

  • Tandberg Data 600 - page 80

    Cl ea ni ng the T ape Mecha nism SDL T 60 0 Pr od uc t Ma nu al 5-6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 N OTE : If the tape drive is mount ed in a tape aut omation li br a r y , the CUP/FUP data c artridge re winds to B OT and un buckles i n prepa rati on for unloa ding, but does not automaticall y eje ct. 5.3.4 Firmware (Code) Update T roublesho ...

  • Tandberg Data 600 - page 81

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-7 5.4.1 Occasional Cleaning of T ape Head SDL T 600 tap e dr ives o ccasiona lly r equir e pre ventive cle aning. The amount of amb ient p o llution a nd partic ulate s in the environme nt, to a lar ge degr ee, dictate s the clea ning ...

  • Tandberg Data 600 - page 82

    Cl ea ni ng the T ape Mecha nism SDL T 60 0 Pr od uc t Ma nu al 5-8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 5.4.5 Loading the C leaning T ape In to a T abletop T ape D rive N OTE : T o use th e cl eaning tape in an Autol oader or L i brary tape drive, refer to your owner’ s m a nua l. Follo w these steps to loa d an SDL T CleaningT ape into an SDL ...

  • Tandberg Data 600 - page 83

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-9 5.5 F ront P anel Control s a nd LEDs All cont rols a nd LEDs are on the ta pe drive’ s front panel. See Figure 5- 2 for de tails. Use th ese c o ntro ls and LE Ds to ope rate t he tape dr ive a nd m onito r the S DL T 600 tape dr ...

  • Tandberg Data 600 - page 84

    Fro nt P ane l Cont rol s an d LE Ds SDL T 60 0 Pr od uc t Ma nu al 5-1 0 Mar c h 20 04 81- 8 1 184- 02 REV A01 T a ble 5-2 . Dua l -Color Dri ve Density LED Appearance fo r T ype of Data Cartridg e Loaded Poss i bl e D a ta C a rtri d g e Sce nari o LED Color /S tate No data cart ridg e is inser ted Off SDL T 600 tape dri ve format ted Su per DL T ...

  • Tandberg Data 600 - page 85

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5-1 1 Ta b l e 5 - 3 explain s t he func tion of the other LEDs and contr ols in the front panel . T a ble 5-3 . How to Inter pret the Front Panel LEDs and Othe r Contr ol s LED /Butt o n/ Por t Title Color/Symbol Act ion Explanat ion D ...

  • Tandberg Data 600 - page 86

    T r oubl esho otin g SDL T 60 0 Pr od uc t Ma nu al 5-1 2 Mar c h 20 04 81- 8 1 184- 02 REV A01 5.6 T roubleshooti ng The following sub secti ons pr o vide trou ble shooti ng inf ormation tha t mig ht be helpful should the syste m fail its Power - On Self- T est (POST). Refer to the data cartridg e appendic es in thi s manual ( Appendix A, “Super ...

  • Tandberg Data 600 - page 87

    SDL T 60 0 Pr od uc t Ma nu al Ch ap ter 5: U s in g Y our T ap e Driv e 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 5 -13 System doe s not recogniz e the SDL T 600 tape dri v e system. (cont inued) Interfa ce b us may not b e terminated c orrectly . If the SDL T 600 tape dri ve s ys te m is la st or only d e vice o n bus (e xcept for adapt er) , be c ...

  • Tandberg Data 600 - page 88

    T r oubl esho otin g SDL T 60 0 Pr od uc t Ma nu al 5-1 4 Mar c h 20 04 81- 8 1 184- 02 REV A01 5.6.2 Over T em p erature Condition The SDL T 600 tape drive has a thermal sensor locat ed in the tap e path. This senso r , which is used to accura tely moni tor the air tempera tur e in the tape path, issues a T apeAl ert warni ng at 47 °C, and detec ...

  • Tandberg Data 600 - page 89

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 6-1 C HAPT ER 6 Regulatory Co mpliance This c hapte r desc ribe s v arious r egula tions t ha t apply to the SDL T 600 tape drive : • “Safet y Regu l ati o ns” desc ribes complia nce with vari ous sta ndard s publish e d by inter nationa l safe ty o rganiz ations . • “Elect ro m ag net i c Fiel d S ...

  • Tandberg Data 600 - page 90

    Ele ctrom agn et ic Fi eld S peci ficat io ns SDL T 60 0 Pr od uc t Ma nu al 6-2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 6.2 Elect r omagnetic Field Specifications SDL T 600 tape drive s are elect rical de vic es; as such, thi s equipment gen era tes, uses, and may emit radio f requenc y ener gy . The tape drive s may emit ener gy in other frequencie ...

  • Tandberg Data 600 - page 91

    SDL T 60 0 Pr od uc t Ma nu al Chap t er 6: Re gu la tory C om pl ia nce 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 6-3 6.2.3 Immunity and ES D Limits Ta b l e 6 - 2 lis ts the immunity and ESD failure level limits to which the SDL T 600 tape drive has been tested. T a ble 6-2 . E lec t ro magne tic Int erferen ce ( EMI) T es t Su mmary Te s t N a m ...

  • Tandberg Data 600 - page 92

    Ac oust ic No ise E miss ions SDL T 60 0 Pr od uc t Ma nu al 6-4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 6.3 Acoust ic Noise E missions Ta b l e 6 - 3 lists a coustic noise emissio n levels, both as noise power and sound pressur e, for the SDL T 600 tape dri ve. The table provi des the prel imi nary decl are d values per ISO 9296 and ISO 7779/ EN2777 ...

  • Tandberg Data 600 - page 93

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-1 A PPEND IX A Supe r DL Tta pe I an d Supe r D L Tt a pe II Da ta Cart r idge s This appendix di scus ses Super DL Ttape I and Super DL Ttape II data cartr idg e infor matio n. Infor mation in thi s appendi x in cludes th e followi ng topics: • Recogni zing Quantu m Super DL Ttape I and II Data Cartridg ...

  • Tandberg Data 600 - page 94

    Da t a C a rtr i dg e Handl ing Gu id el in es SDL T 60 0 Pr od uc t Ma nu al A-2 March 2004 81-81 18 4- 02 REV A01 The SDL T 60 0 t ape drive is back w a rd read co mpatibl e with Super DL Ttape I dat a cartrid ges formatt ed in the SDL T 220 or SDL T 320 tape drive. Figur e A-1 s hows outside chara cterist ic di ff erenc es of the Super DL Ttape ...

  • Tandberg Data 600 - page 95

    SDL T 60 0 Pr oduc t Ma nual Ap pend ix A: S uper DL Ttap e I a nd Su per DL T tape II Data Car tridg es 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-3 • When placin g data cartr idge s in archiva l stor age, be certa in you stand eac h data car tr idge vertic ally . • Do not carry data car tridge s loose ly in a box or any other contai ner . All ...

  • Tandberg Data 600 - page 96

    Da t a C a rt ri dge Insp ection P r o c e dure SDL T 60 0 Pr od uc t Ma nu al A-4 March 2004 81-81 18 4- 02 REV A01 A .3 Data C artrid ge Inspect ion Pr ocedure Ensure your data cartr idge backup solut ion pe rforms relia bly by following the V isua l Mechanic a l Inspec tion (VMI) pr oced ures descri bed in thi s s ubsect ion. The se s teps wi ll ...

  • Tandberg Data 600 - page 97

    SDL T 60 0 Pr oduc t Ma nual Ap pend ix A: S uper DL Ttap e I a nd Su per DL T tape II Data Car tridg es 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-5 5. Refer t o Figur e A-3 a nd check the r eel l oc k openings to ensur e t he small plastic t a bs ins ide a re partia ll y v isibl e. The reel locks are bl ack. The reel locks can break if you dro p ...

  • Tandberg Data 600 - page 98

    Da t a C a rt ri dge Insp ection P r o c e dure SDL T 60 0 Pr od uc t Ma nu al A-6 March 2004 81-81 18 4- 02 REV A01 7. Open th e data c artri dge door by pressing on the ta b i n the door pi vot not ch as shown in Figu re A-4 . Use care that you do not touc h the tape leade r . 8. Compare what you see inside the data car tr idge door to Figure A- ...

  • Tandberg Data 600 - page 99

    SDL T 60 0 Pr oduc t Ma nual Ap pend ix A: S uper DL Ttap e I a nd Su per DL T tape II Data Car tridg es 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-7 A .4 Data Cart ridge Wr ite-protect Switch Each d at a cartri d ge ha s a writ e-p rot ec t sw itch tha t you can us e to pr even t accid ent al erasu re o f data . Before in serting the data c artr i ...

  • Tandberg Data 600 - page 100

    Da t a C a rt ri dge Wri te- pr o tect S wit ch SDL T 60 0 Prod uc t Ma nu al A-8 March 2004 81-81 18 4- 02 REV A01 T a ble A - 1. W r ite-Pr otect Switch P osition s Writ e-prot ect Switch Po sition Orange Wri te-pr otec t Indicato r Re sult Befor e Loading the Data Cartridge Ena bled (S li d e sw i tc h to le f t) V isi ble Y ou cannot write da t ...

  • Tandberg Data 600 - page 101

    SDL T 60 0 Pr oduc t Ma nual Ap pend ix A: S uper DL Ttap e I a nd Su per DL T tape II Data Car tridg es 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 A-9 A .5 Loa ding a Dat a C artr idge Complet e this sub se cti on to load a data c artrid ge i nto th e fr ont of th e tape dr ive; r e fer to F igure A-7 as neede d. 1. Inser t the data ca rtridge i nto ...

  • Tandberg Data 600 - page 102

    Un lo ad in g a Dat a Car t ri dge SDL T 60 0 Pr od uc t Ma nu al A- 10 Mar ch 2 00 4 81 -81 184 -02 REV A 0 1 A .6 Unl oading a D ata Cartri dge Foll ow th ese step s to unlo ad a d ata ca rtrid g e; ref er to Figur e A-7 on page A-9 as needed . 1. Press the Eject button ( or iss ue an appropria te syste m software command) ; the tape drive comple ...

  • Tandberg Data 600 - page 103

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-1 A PPEND IX B DL Ttap e V S1 Dat a Ca rtr idge The SDL T 600 t ap e dr ive is ba ckward r e ad c ompati ble with DL Tt ape VS1 data cartr idg e s forma tted i n the DL T VS 160 tape d ri ve. Data backed up u sing a DL Ttape VS1 da ta cartr idge in a DL T VS160 t a pe drive is retr ieva ble using the SDL T ...

  • Tandberg Data 600 - page 104

    Da t a C a rtr i dg e Handl ing Gu id el in es SDL T 60 0 Pr od uc t Ma nu al B-2 March 2004 81-81 18 4- 02 REV A01 • When placin g data cartr idge s in archiva l stor age, be certa in you stand eac h data car tr idge vertic ally . • Do not carry dat a cartrid ges loosel y in a box or any other contain er . Allowi ng da ta cartr idges to hit to ...

  • Tandberg Data 600 - page 105

    SDL T 60 0 Pr od uc t Ma nu al Ap pend ix B: D L T tape V S1 Data Car trid ge 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-3 B.2 Data C artrid ge Inspect ion Pr ocedure Ensure your data cartr idge backup solut ion pe rforms relia bly by following the V isua l Mechanic a l Inspec tion (VMI) pr oced ures de scri bed in thi s s ubsection. These s teps h ...

  • Tandberg Data 600 - page 106

    Da t a C a rt ri dge Insp ection P r o c e dure SDL T 60 0 Pr od uc t Ma nu al B-4 March 2004 81-81 18 4- 02 REV A01 5. Refer t o Figur e B-2 and chec k the reel loc k openings to ens ur e the small plasti c tabs insid e are partia ll y v isibl e. The reel locks are bl ack. The reel locks can break if you dro p the data car tridge. If the r eel loc ...

  • Tandberg Data 600 - page 107

    SDL T 60 0 Pr od uc t Ma nu al Ap pend ix B: D L T tape V S1 Data Car trid ge 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-5 7. Once a gain, lo ok at the e nd of t he da ta c artri dge, holdin g it a s shown in Fi gure B-4 . Figure B-4. Opening the DL Ttape VS 1 Data Cartridge Door 8. On the rig ht side cor ner of t he da ta c artri dge is a s m all ...

  • Tandberg Data 600 - page 108

    Da t a C a rt ri dge Insp ection P r o c e dure SDL T 60 0 Pr od uc t Ma nu al B-6 March 2004 81-81 18 4- 02 REV A01 Compare what you s e e in side the data c art ri dge door to illustrat ions in Figure B-6 . L ook for fa ulty items inc ludin g:  A br oken tape lea der lo op  A swallowed tap e leader loop  Loose media insid e the data car ...

  • Tandberg Data 600 - page 109

    SDL T 60 0 Pr od uc t Ma nu al Ap pend ix B: D L T tape V S1 Data Car trid ge 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-7 B.3 Data C artridge Write-Prot ect S witch Each d at a cartri d ge ha s a writ e-p rot ec t sw itch tha t you can us e to pr even t accid ent al erasu re o f data . Before in serting the data c artr idge i nto the t ape drive, ...

  • Tandberg Data 600 - page 110

    Load in g a Data C ar tr idg e SDL T 60 0 Pr od uc t Ma nu al B-8 March 2004 81-81 18 4- 02 REV A01 B.4 Loa ding a Data C artr idge Complet e this subse c tion to loa d a data c artr id ge i nto the f ro nt of the ta pe drive; r e fer to F igure B-8 as neede d. T o lo ad a da ta c artr idge, follow these st eps: 1. Inser t the data ca rtridge i nto ...

  • Tandberg Data 600 - page 111

    SDL T 60 0 Pr od uc t Ma nu al Ap pend ix B: D L T tape V S1 Data Car trid ge 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 B-9 B.5 U nloading a D ata Cart ridge Complet e this subsection t o unload a dat a c artridge; refer to Figur e B-8 on page B - 8 as n e eded . 1. Press the Eject button ( or iss ue an appropria te syste m software command) ; the t ...

  • Tandberg Data 600 - page 112

    Un lo ad in g a Dat a Car t ri dge SDL T 60 0 Pr od uc t Ma nu al B- 10 Mar ch 2 00 4 81 -81 184 -02 REV A 0 1 ...

  • Tandberg Data 600 - page 113

    81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G- 1 Glossary The fo llo wi n g is an alpha b et ical list of spec ialize d words an d techn ical te rms w i th the ir defin i tion s, commonly used in the tape drive and tape media industr y . A AC Alternating Current. Access ( v .) T o read, write, or update inf or mation on a storage medium, such as magne ...

  • Tandberg Data 600 - page 114

    B SDL T 60 0 Pr od uc t Ma nu al G- 2 Marc h 20 04 8 1- 8 1 184- 02 REV A01 B Backup A copy of a file, directory , or volume on a separate storage device from the origina l, f or t he purpos e of re trie val in case the original is accidentally erased, damaged, or destroyed. Bad Data Block A block that cannot r eliably hold data because of a media ...

  • Tandberg Data 600 - page 115

    SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G- 3 C D Cache Specialize d RAM used as a buffer between a fa st CPU or I/O channel and storage which has a relative ly slo w access time (for example, tape or diskette), to avoid slowing down t he former . Cartridge Recei ver At media inse rtion, the cartridge receiver assembl ...

  • Tandberg Data 600 - page 116

    E SDL T 60 0 Pr od uc t Ma nu al G- 4 Marc h 20 04 8 1- 8 1 184- 02 REV A01 E Device Acc ording t o the SCSI specification, multi ple SCSI devices can be connected to a single SCSI bus. Each SCSI device contains a SCSI ID number that can be set i n the range 0 to 15. Device Dr iver A low-level (usually ke rnel-mode) operating system component that ...

  • Tandberg Data 600 - page 117

    SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G-5 F G H Error A me ssage tha t occurs when th e re is a l os s of ability to interpret recorded da t a. Usually due to magnetic is s ues or de f ects in or on the media. ESD Electrostatic discharge. A sudden dischar ge of electrostatic energy that can damage delicate elect r ...

  • Tandberg Data 600 - page 118

    I SDL T 60 0 Pr od uc t Ma nu al G- 6 Marc h 20 04 8 1- 8 1 184- 02 REV A01 I J HIM Host Interface Module. T his board is one of two boar ds that make up the EIM. The HIM implements the interface bet ween the host system a nd the tape drive; it comes in two diff ere nt variations, SCSI and Fibr e Channel. HRE Har d Read Err o r . HWE Hard W rite E ...

  • Tandberg Data 600 - page 119

    SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G- 7 K L M KB Kilobyte. A unit of measure equal to 1 t housand (1024) bytes. LED Light E mitting Diode. LGMR Laser Guided Magnetic Recording technology . LSB Least Signi fican t Bit. LUN Logical Unit Number . L VD Low V oltage Differential. L VD is a physical interface with pow ...

  • Tandberg Data 600 - page 120

    N SDL T 60 0 Pr od uc t Ma nu al G- 8 Marc h 20 04 8 1- 8 1 184- 02 REV A01 N P Native Capacity The c apacity of a given media product in its basic recording format (w i thout the use of data compression). Native Mode R efers to the uncompressed stora ge capacity of a media subsystem. (See Native Capacity .) Node In reference to a F ibre Channel ne ...

  • Tandberg Data 600 - page 121

    SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G- 9 Q R S QEZ An Application Specif ic Integrated C ircuit (A S IC) for the SD L T 600 tape drive. qT alk One of the ut ilities compris ing Quantum’ s DL T Sage, qT alk lets users com municate wit h other computers via a serial line th at’ s usually connec t ed to a modem. ...

  • Tandberg Data 600 - page 122

    T SDL T 60 0 Pr od uc t Ma nu al G- 10 Mar c h 20 04 81- 8 1 184- 02 REV A01 T Shelf Life The length of time that media ca n be stored w i thout losing its magnetic strength. For Super DL Ttape II media, this period is 30 years or more. SRAM Static RAM. A memory chip that requires power to hold i ts content. T ake- up Reel T he reel inside every ta ...

  • Tandberg Data 600 - page 123

    SDL T 60 0 Pr od uc t Ma nu al 81- 81 18 4- 0 2 R EV A0 1 Mar c h 20 04 G -1 1 U X UL Underwriters Laboratory; a United States safety or ga nization. Ultra 160 An SDL T 600 tape drive SCSI interface that pr ovides a low- voltage differential (L V D) mode running up to 160 MB/sec and a single-ended (SE) mode r unning up to 40 M B/sec. Unformatted Ca ...

  • Tandberg Data 600 - page 124

    X SDL T 60 0 Pr od uc t Ma nu al G- 12 Mar c h 20 04 81- 8 1 184- 02 REV A01 ...

  • Tandberg Data 600 - page 125

    ...

  • Tandberg Data 600 - page 126

    March 200 4 Quantu m Publica tion Numb er: 81-81 184-02 A01 T a nd be r g Publicati on Number: 432821-0 1 *81- 81 184-0 2 A01* 81-81184-02 RE V A01 ...

Manufacturer Tandberg Data Category Network Card

Documents that we receive from a manufacturer of a Tandberg Data 600 can be divided into several groups. They are, among others:
- Tandberg Data technical drawings
- 600 manuals
- Tandberg Data product data sheets
- information booklets
- or energy labels Tandberg Data 600
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tandberg Data 600.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tandberg Data 600, service manual, brief instructions and user manuals Tandberg Data 600. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tandberg Data 600.

Similar manuals

A complete manual for the device Tandberg Data 600, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tandberg Data 600 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tandberg Data 600.

A complete Tandberg Data manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tandberg Data 600 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tandberg Data 600, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tandberg Data 600, that we can find in the current document
3. Tips how to use the basic functions of the device Tandberg Data 600 - which should help us in our first steps of using Tandberg Data 600
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tandberg Data 600
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tandberg Data 600 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tandberg Data 600?

Use the form below

If you did not solve your problem by using a manual Tandberg Data 600, ask a question using the form below. If a user had a similar problem with Tandberg Data 600 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)