English dropdown-ico

Manual Axis Communications M3007PV

61 pages 1.91 mb
Download

Go to site of 61

Summary
  • Axis Communications M3007PV - page 1

    AXIS M300 7–PV User Manual ...

  • Axis Communications M3007PV - page 2

    About this Document This manual is intended for administrators and users of AXIS M300 7–PV Network Camera, and is applicable to rmware 5.55 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based syst ...

  • Axis Communications M3007PV - page 3

    Safety This product complies with IEC/EN/UL 60950-1, Safety of Information Technology Equipment. If its connecting cables are routed outdoors, the product shall be grounded either through a shielded network cable (STP) or other appropriate method. The power supply used with this product shall fulll the requirements for Safety Extra Low V oltage ...

  • Axis Communications M3007PV - page 4

    AXIS M3007–PV T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications M3007PV - page 5

    AXIS M3007–PV T able of Contents P erformance Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 5 ...

  • Axis Communications M3007PV - page 6

    AXIS M3007–PV Hardware Overview Hardware Overview 5 1 4 3 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 6 1. Dome cover 2. Control button 3. Status LED 4. microSD Card slot 5. Network connector (PoE) (comes attached with the product) 6. Focus ring Connectors and Buttons For technical specications, see page 58 . Network Connector RJ45 Ethernet connector with ...

  • Axis Communications M3007PV - page 7

    AXIS M3007–PV Hardware Overview NO NO NO TICE TICE TICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specic use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about regula ...

  • Axis Communications M3007PV - page 8

    AXIS M3007–PV Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating systems. See Technical Spe ...

  • Axis Communications M3007PV - page 9

    AXIS M3007–PV Access the Product The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 53 . To set the password via a standard HTTP connection, enter it directly in the dialog. To set th ...

  • Axis Communications M3007PV - page 10

    AXIS M3007–PV Access the Product Controls on the Live View P age Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. Select a stream prole for the Live View page from the Stream Prole drop-down list. For information about how to congure stream proles, see page 20 . The Manual Trigger b ...

  • Axis Communications M3007PV - page 11

    AXIS M3007–PV Access the Product Click the View Full Screen button and the video image will ll the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view . The Record button is used to record the current video stream. The location where the recording is saved can be specied in the AMC Control P anel. Enable th ...

  • Axis Communications M3007PV - page 12

    AXIS M3007–PV Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream proles. Other applications and cli ...

  • Axis Communications M3007PV - page 13

    AXIS M3007–PV Media Streams The AMC Control P anel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control Panel from: • Windows Control P anel (from the Start ...

  • Axis Communications M3007PV - page 14

    AXIS M3007–PV Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 14 ...

  • Axis Communications M3007PV - page 15

    AXIS M3007–PV Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to all settings except S ...

  • Axis Communications M3007PV - page 16

    AXIS M3007–PV Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 16 . • Stream proles. See page 20 . • Camera settings. See page 20 . • View areas. See page 22 • Overlay image. See page 22 . • Privacy mask. See page 24 . Set Up Video Streams To set up the product’s ...

  • Axis Communications M3007PV - page 17

    AXIS M3007–PV Video Overview This is an overview of the entire area under surveillence. Dene the settings for this view from Setup > Video > Video Stream . See Set Up Video Streams on page 16 . P anorama This offers a 180 degree view . Dene the settings for this view from Setup > Video > Video Stream > P anorama . See Set Up ...

  • Axis Communications M3007PV - page 18

    AXIS M3007–PV Video Quad View A quad view is four views on a single screen where each image takes up a quarter of the display area. To dene the settings for this view go to Setup > Video > Video Stream > Quad View . See Set Up Video Streams on page 16 . Image The default image settings can be congured under Video> Video Stream . ...

  • Axis Communications M3007PV - page 19

    AXIS M3007–PV Video The following settings are available: • Resolution . Select the default resolution. • Compression . The compression level affects the image quality , bandwidth and le size of saved images; the lower the compression, the higher the image quality with higher bandwidth requirements and larger le sizes. • Mirror image ...

  • Axis Communications M3007PV - page 20

    AXIS M3007–PV Video • Baseline . The Baseline prole is recommended for clients that don’t support CABAC entropy coding. • Main . The Main prole provides higher compression with maintained video quality compared to the Baseline prole but requires more processing power to decode. The bit rate can be set as V ariable bit rate (VBR) or ...

  • Axis Communications M3007PV - page 21

    AXIS M3007–PV Video Increasing the Sharpness can increase bandwidth usage. A sharper image might increase image noise especially in low light conditions. A lower setting reduces image noise, but the whole image will appear less sharp. The Contrast changes the relative difference between light and dark. It can be adjusted using the slidebar . Whit ...

  • Axis Communications M3007PV - page 22

    AXIS M3007–PV Video Set Gain to • Auto to set the gain automatically . If required, use Max gain to limit the applied gain. • Fixed to use a xed gain. When Shutter and Gain are both set to Auto , it is possible to set the Priority between low motion blur and low noise manually and to use a different Priority in Normal Light and in Low Ligh ...

  • Axis Communications M3007PV - page 23

    AXIS M3007–PV Video Overlay Image An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is used to provide extra information or to mask a part of the image. Since it is static, the position and size of an overlay image will remain the same regardless of resolution and Pan/Tilt/Zoom movements ...

  • Axis Communications M3007PV - page 24

    AXIS M3007–PV Video 1. Go to Video > Video Stream and select the Image tab . 2. Under Overlay Settings , select Include text . 3. Enter the modier #D and, optionally , additional text which will be displayed also when the action rule is not active. Create the action rule: 1. Go to Events > Action Rules 2. Click Add to create a new rule. ...

  • Axis Communications M3007PV - page 25

    AXIS M3007–PV Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 20 . • Default Viewer for Browser . See page 25 . • Viewer Settings. See page 25 . • Act ...

  • Axis Communications M3007PV - page 26

    AXIS M3007–PV Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved to the location specied in the AMC Control P anel. See AXIS Media Control (AMC) on page 12 . User Dened Links To display user-dened links ...

  • Axis Communications M3007PV - page 27

    AXIS M3007–PV PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) PTZ controls are only available for view areas. Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position. A preset position consists of the following values: • P an and tilt positions • Zoom position Each view area has its own ...

  • Axis Communications M3007PV - page 28

    AXIS M3007–PV PTZ (Pan Tilt Zoom) To add a guard tour: 1. Go to PTZ > Guard Tour and click Add . 2. Enter a descriptive name. 3. Specify the pause length between runs. 4. Select an available preset position and click Apply . 5. Specify the View Time in seconds or minutes. 6. Specify the View Order or select the Random view order option. 7. Cli ...

  • Axis Communications M3007PV - page 29

    AXIS M3007–PV Detectors Detectors Camera T ampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. T o send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera Tampering . 2. Set the Minimum d ...

  • Axis Communications M3007PV - page 30

    AXIS M3007–PV Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion Detection Windows To ...

  • Axis Communications M3007PV - page 31

    AXIS M3007–PV Detectors Note • To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • To avoid triggering on small objects, select a high object size. • While monitoring an area where moving objects are not expected, select a high history level. This ...

  • Axis Communications M3007PV - page 32

    AXIS M3007–PV Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications, downloads, trials ...

  • Axis Communications M3007PV - page 33

    AXIS M3007–PV Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 33 ...

  • Axis Communications M3007PV - page 34

    AXIS M3007–PV Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an action rule. Convert Even ...

  • Axis Communications M3007PV - page 35

    AXIS M3007–PV Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 32 . • Detectors - Day/Night Mode – T rigger the rule when the product switches between day mode (IR cut lter on) and ...

  • Axis Communications M3007PV - page 36

    AXIS M3007–PV Events - Recurrence – Trigger the rule periodically . See Set Up Recurrences on page 38 . This can for example be used to upload an image every 5 minutes. - Use Schedule – T rigger the rule according to the selected schedule. See Create Schedules on page 37 . Actions Available actions include: • PTZ Control - Preset P osition ...

  • Axis Communications M3007PV - page 37

    AXIS M3007–PV Events HTTP Send Images Send Notication Send Video Clip HTTPS Send Images Send Notication Send Video Clip Encrypted le transfer using HyperT ext Transfer Protocol Secure (HTTPS). Specify login information for the HTTPS server and validate the server’s certicate. If there is a proxy between the Axis product and the HTTP ...

  • Axis Communications M3007PV - page 38

    AXIS M3007–PV Events 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurrences Recurrences are used to trigger action rules repeatedly , for example every 5 minutes or every hour . To set up a recurrence: 1. Go to Events > Recurrences and click Ad ...

  • Axis Communications M3007PV - page 39

    AXIS M3007–PV Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 39 . • To set up action rules, see page 34 . • To access recordings, see Recording List on page 39 . • To congure camera controlled storage, see Storage on page ...

  • Axis Communications M3007PV - page 40

    AXIS M3007–PV Recordings 5. Click Save to save and start the recording. 40 ...

  • Axis Communications M3007PV - page 41

    AXIS M3007–PV Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language button. Select the new la ...

  • Axis Communications M3007PV - page 42

    AXIS M3007–PV System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Li ...

  • Axis Communications M3007PV - page 43

    AXIS M3007–PV System Options 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired protocol, in the address eld in a browser , enter https:// for the HTTPS protocol and ...

  • Axis Communications M3007PV - page 44

    AXIS M3007–PV System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1. Create a self-signed certicate as described above. 2. Go to Setup > Syste ...

  • Axis Communications M3007PV - page 45

    AXIS M3007–PV System Options IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP . The IPv4 settings are congured under System Options > Network > T CP/IP > Basic . DHCP (Dynamic Host Conguration Protocol) allows network administrators to cen ...

  • Axis Communications M3007PV - page 46

    AXIS M3007–PV System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar . 6. Open a browser and type http://<IP address> in the Location/Address eld. For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IP Address a ...

  • Axis Communications M3007PV - page 47

    AXIS M3007–PV System Options NTP Conguration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are congured under System Options > Network > T CP/IP > Advanced . Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server . To make manual s ...

  • Axis Communications M3007PV - page 48

    AXIS M3007–PV System Options Use manually selected NA T router - Select this option to manually select a NA T router and enter the IP address for the router in the eld. If no router is specied, the product automatically searches for NA T routers on your network. If more than one router is found, the default router is selected. Alternative H ...

  • Axis Communications M3007PV - page 49

    AXIS M3007–PV System Options Note If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled. Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the T rap community that should rece ...

  • Axis Communications M3007PV - page 50

    AXIS M3007–PV System Options Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card with speed class 1 0. The following SD card le systems are supported: • ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. T o ac ...

  • Axis Communications M3007PV - page 51

    AXIS M3007–PV System Options Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www .axis.com/products/cam_companion_software/supported.htm Note ...

  • Axis Communications M3007PV - page 52

    AXIS M3007–PV System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also T roubleshooting on page 54 . System Overview To get an overview of the Axis product’s status and settings, go to Syst ...

  • Axis Communications M3007PV - page 53

    AXIS M3007–PV System Options File Upload Files, for example webpages and images, can be uploaded to the Axis product and used as custom settings. To upload a le, go to System Options > Advanced > File Upload . Uploaded les are accessed through http://<ip address>/local/<user>/<file name> where <user> is the sel ...

  • Axis Communications M3007PV - page 54

    AXIS M3007–PV Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. The current rmwa ...

  • Axis Communications M3007PV - page 55

    AXIS M3007–PV Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try the installation again ...

  • Axis Communications M3007PV - page 56

    AXIS M3007–PV Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the client Check that the rel ...

  • Axis Communications M3007PV - page 57

    AXIS M3007–PV Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . To identify the source of the problem, check the System Log under System Options > Support > Logs & Reports . Depend ...

  • Axis Communications M3007PV - page 58

    AXIS M3007–PV T echnical Specifications T echnical Specifications Function/group Item Specications Model AXIS M300 7–PV: 5 MP resolution, 360°/180° Image sensor 1/3.2" progressive scan RGB CMOS Lens M12 mount, F2.8, xed iris, megapixel resolution 1.3 mm, horizontal angle of view: 187°, vertical angle of view: 168°, diagonal ang ...

  • Axis Communications M3007PV - page 59

    AXIS M3007–PV T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, VAPIX® and AXIS Camera Application Platform from Axis Communications, specications available at www .axis.com Support for AXIS Video Hosting System (A VHS) with One-Click Camera connection Intellige ...

  • Axis Communications M3007PV - page 60

    AXIS M3007–PV T echnical Specifications Function/group Item Specications Japan: VCCI-20 1 1, Class B, ITE • C-tick AS/NZS CISPR 22, demonstrated by compliance with EN 550 22 (CISPR 22) Canada: ICES-003 Canadian ICES-003, Class B digital, demonstrated by compliance with EN 550 22 (CISPR 22) Korea: KCC Class B Environmental: IEC 60529 IP42, I ...

  • Axis Communications M3007PV - page 61

    User Manual V er . M8.3 AXIS M300 7–PV Date: December 20 14 © Axis Communications AB, 2012 - 20 14 P art No. 6 1217 ...

Manufacturer Axis Communications Category Security Camera

Documents that we receive from a manufacturer of a Axis Communications M3007PV can be divided into several groups. They are, among others:
- Axis Communications technical drawings
- M3007PV manuals
- Axis Communications product data sheets
- information booklets
- or energy labels Axis Communications M3007PV
All of them are important, but the most important information from the point of view of use of the device are in the user manual Axis Communications M3007PV.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Axis Communications M3007PV, service manual, brief instructions and user manuals Axis Communications M3007PV. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Axis Communications M3007PV.

Similar manuals

A complete manual for the device Axis Communications M3007PV, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Axis Communications M3007PV by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Axis Communications M3007PV.

A complete Axis Communications manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Axis Communications M3007PV - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Axis Communications M3007PV, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Axis Communications M3007PV, that we can find in the current document
3. Tips how to use the basic functions of the device Axis Communications M3007PV - which should help us in our first steps of using Axis Communications M3007PV
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Axis Communications M3007PV
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Axis Communications M3007PV in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Axis Communications M3007PV?

Use the form below

If you did not solve your problem by using a manual Axis Communications M3007PV, ask a question using the form below. If a user had a similar problem with Axis Communications M3007PV it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)