English dropdown-ico

Manual Kenwood KRC-865

30 pages 0.58 mb
Download

Go to site of 30

Summary
  • Kenwood KRC-865 - page 1

    KRC-865 ©B64-2155-00 (MW/IW) CASSETTE RECEIVER INSTR UCTION MANU AL KRC-865(M) Cover 01.10.26 5:45 PM Page 1 ...

  • Kenwood KRC-865 - page 2

    — 2 — English Contents Safety precautions ......................3 About Cassette tape ...................4 General features .........................5 Power Selecting the Source V olume Attenuator Loudness System Q Audio Control Speaker Setting Switching Display Switching Clock Display Station/Diac Naming (SNPS/DNPS) Auxiliary Input Display Set ...

  • Kenwood KRC-865 - page 3

    — 3 — T o prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.75mm 2 (A WG18) or more to prevent wi ...

  • Kenwood KRC-865 - page 4

    Safety precautions — 4 — English • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. If the unit still fails to operate properly after the Reset button has been pressed, contact ...

  • Kenwood KRC-865 - page 5

    Increasing V olume Press the [ u ] button. Decreasing V olume Press the [ d ] button. V olume Press the [SRC] button. Source required Display T uner "TUNER" T ape "T APE" External disc "DISC" Auxiliary input "AUX" Standby (Illumination only mode) "ALL OFF" For Auxiliary input one of the below option ...

  • Kenwood KRC-865 - page 6

    1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed the items that can be adjusted switch as shown below . 4 Adjust the Audio item Press the [ 4 ] or [ ¢ ] button. Adj ...

  • Kenwood KRC-865 - page 7

    Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below . In T uner source Information Display Frequency Station name "SNPS" In T ape source Information Play side & T ape counter Play side & T ape running Play side In External disc source Information Display ...

  • Kenwood KRC-865 - page 8

    Selecting the display when this device is switched to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX" display . 2 Enter Auxiliary input display setting mode Press the [NAME.S] button for at least 2 seconds. The presently selected AUX Name is displayed. Auxiliary Input Display Setting Exampl ...

  • Kenwood KRC-865 - page 9

    • When the faceplate is kept remove open, according to the <OFF Wait T ime Setting> (page 19) setting, the faceplate is hidden and the power turns OFF . • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. • Do not expose ...

  • Kenwood KRC-865 - page 10

    T uner features Prevents tampering with the unit while your car is being serviced etc. Hiding the control panel Press the [SRC] button for at least 1 second. The faceplate slides open. When the time set in <OFF Wait T ime Setting> (page 19) lapses, the faceplate is hidden and the power turns OFF . Showing the control panel Press the left part ...

  • Kenwood KRC-865 - page 11

    Putting the station in the memory . 1 Select the band Press the [FM] or [AM] button. 2 Select the frequency to put in the memory Press the [ 4 ] or [ ¢ ] button. 3 Put the frequency in the memory Press the [#1] — [#6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each ...

  • Kenwood KRC-865 - page 12

    Cassette player features Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. While pressing the [#1] and [#5] button, press the Reset button. The frequency step changes to FM band 200 kHz, and AM band 10 kHz. • When the same operation is repeated, it returns to the original setting. • When the frequenc ...

  • Kenwood KRC-865 - page 13

    Indicating the songs to skip, and Fast Forwarding or Rewinding. Skipping to a later song Press the [ ¢ ] button. Each time the button is pressed the number of songs skipped increases. Skipping to a previous song Press the [ 4 ] button. Each time the button is pressed the number of songs skipped increases. Canceling DPSS Press the [PROG] button. ? ...

  • Kenwood KRC-865 - page 14

    External disc control features Repeating the present song. Press the [REP] button. Each time the button is pressed the Music Repeat turns ON or OFF . When it's ON, "Repeat ON" is displayed. Music Repeat Fast forwarding automatically when an unrecorded portion continues for at least 10 seconds. Press the [B.S] button. Each time the bu ...

  • Kenwood KRC-865 - page 15

    Doing Disc Search by entering the disc number . 1 Enter the disc number Press the number buttons on the remote. 2 Do Album Search Press the [DISC+] or [DISC–] button. Canceling Direct Album Search Press the [ 38 ] button. Input "0" to select disc 10. Direct Album Search (Function of disc changers with remote) Doing T rack Search by ente ...

  • Kenwood KRC-865 - page 16

    Selecting the CD displayed in the DNPS of the CDs set in the Disc changer . 1 Enter DNPP mode Press the [DNPP] button on the remote. When "DNPP" is displayed the DNPS display in order . Forward / Reverse display Press the [DISC–] or [DISC+] button. 2 When the disc you want is displayed Press the [OK] button on the remote. The disc being ...

  • Kenwood KRC-865 - page 17

    Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] bu ...

  • Kenwood KRC-865 - page 18

    1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "Clock Adjust" display . Manual Clock Adjustment Setting the operation check sound (beep sound) ON/OFF . Display Setting "Beep ON" Beep is heard. "Beep OFF" Beep canceled. T ouch Sensor T one If you enter a Code different from your Security Code, ...

  • Kenwood KRC-865 - page 19

    Setting the time until the faceplate hide operation starts after the power is turned OFF . The faceplate can be removed only during the set time period. Display and Setting "Off Wait 0s" "Off Wait 3s" (Original setting) "Off Wait 25s" … … OFF Wait T ime Setting Dimming this unit's display automatically when th ...

  • Kenwood KRC-865 - page 20

    Setting the displayed text scroll. Display Setting "Scroll Auto" Repeats scroll. "Scroll MANU" Scrolls when the display changes. The text scrolled is shown below . • CD text • MD title T ext Scroll <In External disc control mode> T emporarily have reception switched from stereo to mono to reduce multi-path noise when l ...

  • Kenwood KRC-865 - page 21

    [VOL.] buttons Adjusting the volume. [SRC] button Each time the button is pressed the source switches. For the source switching order refer to <Selecting the Source> (page 5). [A TT] button T urning the volume down quickly . When it is pressed again it returns to the previous level. Basic operations Use one lithium battery (CR2025). Insert th ...

  • Kenwood KRC-865 - page 22

    [ 4 ]/ [ ¢ ] buttons Doing track forward and backward. [DISC+]/ [DISC–] buttons Doing album forward and backward. [ 38 ] button Each time the button is pressed the song pauses and plays. [DNPP]/ [OK] button Enters and cancels the <DNPP (Disc Name Preset Play)> (page 16) mode. [#0] — [#9] buttons When in <Direct T rack Search> (page ...

  • Kenwood KRC-865 - page 23

    — 23 — Accessories Do not use any accessories other than those provided with your unit. If you use other accessories, you may damage the unit. 7. Reconnect the - battery . 8. Press the left part at the upper side of the faceplate once to make the faceplate control panel appear . 1. T o prevent a short circuit, remove the key from the ignition a ...

  • Kenwood KRC-865 - page 24

    English — 24 — ANT. CONT ILLUMI EXT.CONT. P.CONT + + + + FRONT • L FRONT • R REAR • L REAR • R – + REAR FRONT R L FM/AM antenna input 15 10 Rear left output (White) 11 Rear right output (Red) Fuse (10A) 27 Wiring harness (Accessory 1 ) 22 28 White/Black 31 Gray/Black 34 Green/Black 37 Purple/Black White 30 Gray 33 Green 36 Purple 39 T ...

  • Kenwood KRC-865 - page 25

    — 25 — Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Metal mounting strap (commercially available) Phillips truss head sheet metal screw (commercially availab ...

  • Kenwood KRC-865 - page 26

    English — 26 — 1 Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released. Accessory 8 Removal tool 3 Refer to the section "Removing the faceplate" (page 9) and then reattaching the faceplate. Never insert the taptite screws (ø2 X 4 mm) in any other screw holes than the one ...

  • Kenwood KRC-865 - page 27

    — 27 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown. ☞ After checking for short circuits in the wires, replace the fuse with one with the ...

  • Kenwood KRC-865 - page 28

    English — 28 — T roubleshooting Guide ✔ O-N switch is set to "O" side. ☞ Set the switch to "N" side. ✔ Unsupported disc changer is connected. 51 ☞ Connect the supported disc changer . (page 3) ? The specified disc does not play , but another one plays instead. 52 ✔ The specified CD is quite dirty . ☞ Clean the CD ...

  • Kenwood KRC-865 - page 29

    — 29 — The messages shown below display your systems condition. Eject: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. E01 ➪ Load the disc magazine properly . No CD in the unit. ➪ Insert the CD. No Disc: No disc has been loaded in the disc magazine. E02 ➪ Load a disc into the disc magazine. TO ...

  • Kenwood KRC-865 - page 30

    English — 30 — Specifications FM tuner section Frequency range (50 kHz) ..........................................87.5 MHz – 108.0 MHz (200 kHz) ........................................87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) ....................9.3dBf (0.8 µV/75 Ω ) Quieting Sensitivity (S/N = 50dB) ...............15.2dBf (1 ...

Manufacturer Kenwood Category Car Stereo System

Documents that we receive from a manufacturer of a Kenwood KRC-865 can be divided into several groups. They are, among others:
- Kenwood technical drawings
- KRC-865 manuals
- Kenwood product data sheets
- information booklets
- or energy labels Kenwood KRC-865
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kenwood KRC-865.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kenwood KRC-865, service manual, brief instructions and user manuals Kenwood KRC-865. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kenwood KRC-865.

Similar manuals

A complete manual for the device Kenwood KRC-865, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kenwood KRC-865 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kenwood KRC-865.

A complete Kenwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kenwood KRC-865 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kenwood KRC-865, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kenwood KRC-865, that we can find in the current document
3. Tips how to use the basic functions of the device Kenwood KRC-865 - which should help us in our first steps of using Kenwood KRC-865
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kenwood KRC-865
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kenwood KRC-865 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kenwood KRC-865?

Use the form below

If you did not solve your problem by using a manual Kenwood KRC-865, ask a question using the form below. If a user had a similar problem with Kenwood KRC-865 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)