English dropdown-ico

Manual Sanyo PDG-DWL2500

82 pages 5.06 mb
Download

Go to site of 82

Summary
  • Sanyo PDG-DWL2500 - page 1

    Owner ’ s Manual Multimedia Projector MODEL PDG-DWL2500 3D Ready • DLP ® Link and IR format compatible Network Supported Refer to the Owner's Manual below for details about network function. • Network Set-up and Operation ...

  • Sanyo PDG-DWL2500 - page 2

    2 T rademarks • DLP is a registered trademark of T exas Instruments. BrilliantColor and DynamicBlack are trademarks of T exas Instruments. • HDMI, the HDMI logo and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing, LLC. • T rademark PJLink is a trademark applied for trademark rights in Japan, ...

  • Sanyo PDG-DWL2500 - page 3

    3 Features and Design This Multimedia Projector is designed with the most advanced technology for portability , durability , and ease of use. 4 Note: • The On-Screen Menu and figures in this manual may differ slightly from the product. • The contents of this manual are subject to change without notice. u Large Screen in Limited Space Short focu ...

  • Sanyo PDG-DWL2500 - page 4

    4 T able of Contents Features and Design . . . . . . . . . . . . . . . . . . .3 T able of Contents . . . . . . . . . . . . . . . . . . . . . . 4 T o t h e O w n e r .......................... 5 Safety Instructions . . . . . . . . . . . . . . . . . . . . .6 Air Circulation 7 Filter Maintenance 7 Moving the Projector 7 Installing the Projector in Pro ...

  • Sanyo PDG-DWL2500 - page 5

    5 T o the Owner CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EXCEPT LAMP REPLACEMENT . REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICA TES THA T DANGEROUS VOL T AGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT . THIS SYMBOL INDICA TES THA T T ...

  • Sanyo PDG-DWL2500 - page 6

    6 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions marked on the pro- je ...

  • Sanyo PDG-DWL2500 - page 7

    7 Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector , the following precautions should be taken. – Do not put any flammable o ...

  • Sanyo PDG-DWL2500 - page 8

    8 Install the projector properly . Improper installation may reduce the lamp life and cause fire hazard. Choose the running speed of cooling fans in the fan control setting according to the altitude in which the projector is being used (p.61). Failure to do so may affect the projector life. CAUTION CAUTION ON CEILING MOUNTING For ceiling mounting, ...

  • Sanyo PDG-DWL2500 - page 9

    9 Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and ...

  • Sanyo PDG-DWL2500 - page 10

    10 Part Names and Functions q T op Controls and Indicators w Infrared Remote Receiver e Lamp Cover (Lamp and Air Filter) r Adjustable feet t Speaker y Exhaust vent u Air Intake vent i Projection Window 4 Note: Do not touch the projection window , otherwise, the window may be soiled and the image can be smudgy . o Focus Lever !0 LAN Connection T erm ...

  • Sanyo PDG-DWL2500 - page 11

    1 1 i 3D SYNC OUT Connect a 3D sync. signal cable for an IR wireless emitter to this jack (p.48) o LAN Connection T erminal Connect the LAN cable (refer to the owner ’s manual of "Network Set-up and Operation"). !0 COMPUTER IN 1/COMPONENT IN Connect output signal from a computer , RGB scart 21-pin video output or component video output ...

  • Sanyo PDG-DWL2500 - page 12

    12 Part Names and Functions q POWER indicator – Turn red when the projector is in the stand-by mode. – Turn green while the projector is under operation (pp.20, 74). – Blink green in the Power management mode (pp.57, 74) w W ARNING TEMP . indicator Emit a red light when the projector detects abnor- mal condition. This also blinks red when the ...

  • Sanyo PDG-DWL2500 - page 13

    13 Part Names and Functions 4 Note: T o ensure safe operation, please observe the following precautions: • Do not bend, drop, or expose the remote control to moisture or heat. • For cleaning, use a soft dry cloth. Do not apply benzene, thinner , spray , or any chemical material. Remote Control ⑦ ⑩ ④ ② ⑧ ⑨ ⑤ ⑥ ⑪ ⑫ ③ ② AUT ...

  • Sanyo PDG-DWL2500 - page 14

    14 Part Names and Functions T o ensure safe operation, please observe the following precautions : l Use two (2) AAA or LR03 type alkaline batteries. l Always replace batteries in sets. l Do not use a new battery with a used battery . l Avoid contact with water or liquid. l Do not expose the remote control to moisture or heat. l Do not drop the remo ...

  • Sanyo PDG-DWL2500 - page 15

    A B C E D 15 Positioning the Projector For projector positioning, see the figures below . The projector should be set perpendicularly to the plane of the screen. Installation 4 Note: • This projector is not equipped with an optical zoom. T o adjust the screen size, change the throw distance. • The brightness in the room has a great influence on ...

  • Sanyo PDG-DWL2500 - page 16

    16 Installation Connecting to a Computer Cables used for connection • VGA cables (Mini D-sub 15 pin) * • Audio cables • HDMI-DVI cable (*One cable is supplied; other cables are not supplied with the projector .) 4 Note: • Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the COMPUTER IN 1/COMPONENT IN terminal as input. • ...

  • Sanyo PDG-DWL2500 - page 17

    17 Installation Connecting to V ideo Equipment Cables used for connection • Video and Audio cable (RCA x 3) • S-video cable • Audio cable (Cables are not supplied with the projector . ) External Audio Equipment Audio cable (stereo) VIDEO IN and AUDIO IN S-VIDEO IN S-video cable Video and audio cable Video and Audio Output S-video Output Audio ...

  • Sanyo PDG-DWL2500 - page 18

    18 Installation Connecting to Component V ideo Equipment Cables used for connection • Audio cables • Scart-VGA cable • Component cable • Component-VGA cable • HDMI cable (Cables are not supplied with this projector .) External Audio Equipment COMPUTER 1/ COMPONENT AUDIO IN Audio cable (stereo) Audio Input Component Video Output (Y , Pb/Cb ...

  • Sanyo PDG-DWL2500 - page 19

    19 Installation Connecting the AC Power Cord This projector uses nominal input voltages of 100–240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor . T o reduce the risk of electrical shock, do not plug into any other type of power system. If yo ...

  • Sanyo PDG-DWL2500 - page 20

    20 The preparation display will disappear after 30 seconds. (See page 58 for Lamp control status.) T urning On the Projector Connect the projector ’s AC power cord into an AC outlet. The POWER indicator lights red. Press the ON/ST AND-BY button on the remote control or on the top control. The POWER indicator lights green and the cooling fans star ...

  • Sanyo PDG-DWL2500 - page 21

    21 What is PIN code? PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector . Setting a PIN code prevents unauthorized use of the projector . A PIN code consists of a four-digit number . Refer to the PIN code lock function in the Setting Menu on pages 59-60 for locking operation of ...

  • Sanyo PDG-DWL2500 - page 22

    22 TO MAINT AIN THE LIFE OF THE LAMP , ONCE YOU TURN THE PROJECTOR ON, W AIT A T LEAST FIVE MINUTES BEFORE TURNING IT OFF . Power off? disappears after 4 seconds. T urning Off the Projector Press the ON/ST AND-BY button on the remote control or on the top control, and Power off? appears on the screen. Press th e ON/ST AND- BY button ag ain to turn ...

  • Sanyo PDG-DWL2500 - page 23

    23 How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. The menu has a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Use the Point ed buttons to hi ...

  • Sanyo PDG-DWL2500 - page 24

    24 Menu Bar For detailed functions of each menu, see “Menu T ree” on pages 72-73. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ Main Menu Sub-Menu ⑨ ⑩ ① Input Used to select an input source from Computer 1 , Computer 2 , HDMI , Video or S-video . (pp.30-31, 41-42) ② PC adjust Select Auto PC adj. , Fine sync , T otal dots , Horizontal , V ertical , Cu ...

  • Sanyo PDG-DWL2500 - page 25

    25 Zoom and Image Position Adjustment Press the ZOOM +/- buttons on the top control to adjust the screen size. Screen size can be adjusted 84% to 100% from its maximum screen size. It is not available when On-Screen menu is displayed. Zoom adjustment can be memorized. (p.52) Focus Adjustment Adjust the lens focus with the focus lever . Focus Lever ...

  • Sanyo PDG-DWL2500 - page 26

    26 Basic Operation Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search and Auto PC adj. functions) in the Setting Menu by just pressing the AUTO SET button on the remote control. Refer to page 51 for the setting of the Auto setup function. 4 Note: Fine sync, T otal dots, Horizontal and Vertical ...

  • Sanyo PDG-DWL2500 - page 27

    27 Basic Operation Sound Adjustment 1 2 Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Sound . Press the Point 8 or the SELECT button to access the submenu items. Press the VOLUME+/– buttons on the remote control or on the top control to adjust the volume. The volume dialog box appears on the screen for a ...

  • Sanyo PDG-DWL2500 - page 28

    28 Basic Operation Remote Control Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu. Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and COMPONENT buttons on the remote control to select the input ...

  • Sanyo PDG-DWL2500 - page 29

    29 Basic Operation Press the NO SHOW button on the remote control to black out the image. T o restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as User in the Logo selection (p.53), the screen changes each time you press the NO SHOW button as follows. black out a the capture ...

  • Sanyo PDG-DWL2500 - page 30

    30 Choose Computer 1(RGB) by pressing the COMPUTER 1 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below . 1 Input Menu 2 3 Input Source Selection (Computer 1: RGB) Computer Input COMPUTER 1 button 4 Note: When the Input Search function is set to On 1 or On 2 in ...

  • Sanyo PDG-DWL2500 - page 31

    31 Choose Computer 2 (RGB) by press the COMPUTER 2 button on the remote control. 4 Note: When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.51). COMPUTER 2 button Remote Control 1 2 Press the MENU button to display the On-Screen Menu. Press the Point ed buttons, move ...

  • Sanyo PDG-DWL2500 - page 32

    32 Computer Input PC System Menu PC System Menu Computer System Selection This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional ...

  • Sanyo PDG-DWL2500 - page 33

    33 Computer Input Auto PC adjustment function is provided to automatically adjust Fine sync , T otal dots , Horizontal , V ertical and Clamp position to conform to your computer . PC adjust Menu Auto PC adjustment T o store adjustment parameters The adjusted parameters from the Auto PC adjustment can be stored in the projector . Once the parameters ...

  • Sanyo PDG-DWL2500 - page 34

    34 Computer Input PC adjust Menu Manual PC adjustment Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector . Manual PC adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually a ...

  • Sanyo PDG-DWL2500 - page 35

    35 Computer Input T o store the adjusted data, select Store and then press the Point 8 or the SELECT button. Move the highlight to one of the Modes 1 to 10 in which you want to store, and then press the SELECT button. T o clear the stored data, select Mode free and then press the Point 8 or the SELECT button. Move the highlight to the Mode that you ...

  • Sanyo PDG-DWL2500 - page 36

    36 Computer Input Image Select Menu IMAGE button Dynamic Real Image 1 Image 2 Image 3 Image Mode Selection Image 4 Cinema Standard Remote Control IMAGE button Select the desired image mode among Dynamic , Standard , Real , Cinema , Image 1 , Image 2 , Image 3 , and Image 4 by pressing the IMAGE button on the remote control. Picture mode with improv ...

  • Sanyo PDG-DWL2500 - page 37

    37 Computer Input Image adjust Menu Image Adjustment Press the MENU button to display the On-Screen Menu. Use the Point ed buttons to select Image adjust and then press the Point 8 or the SELECT button. 1 2 Use the Point ed buttons select the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 butto ...

  • Sanyo PDG-DWL2500 - page 38

    38 Computer Input Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector automatically switches to the panning mode. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows turn red. When reached to the correction limit, the arrows disappear . Provide the last ...

  • Sanyo PDG-DWL2500 - page 39

    39 Select Digital zoom + . The On-Screen Menu disappears and D. zoom + appears. Press the SELECT button to expand the image size. Use the Point ed7 8 buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM e or the SELECT button on the ...

  • Sanyo PDG-DWL2500 - page 40

    40 Computer Input Keystone This function is used to adjust keystone distortion of the projected image. Use the Point ed buttons to choose the item you want to adjust. Keystone T o correct keystone distortion, press the SELECT button. Keystone appears on the screen. Use the Point ed buttons to correct keystone distortion (p.26). Store or Reset T o s ...

  • Sanyo PDG-DWL2500 - page 41

    41 Choose Video or S-video by pressing the VIDEO button or the S-VIDEO button on the remote control. 1 2 Input Menu Input Source Selection (V ideo, S-video) V ideo Input When video input signal is connected to the VIDEO jack, select Video. Video When video input signal is connected to the S- VIDEO jack, select S-video. S-video 4 Note: When the Inpu ...

  • Sanyo PDG-DWL2500 - page 42

    42 Choose Computer 1(Component) or Computer 1(Scart) by pressing the the COMPONENT or COMPUTER 1 button on the remote control; choose HDMI by pressing the HDMI button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below . 1 Input Menu 2 Use the Point ed buttons to selec ...

  • Sanyo PDG-DWL2500 - page 43

    43 V ideo Input Image Select Menu IMAGE button Dynamic Real Image 1 Image 2 Image 3 Image Mode Selection Image 4 Cinema Standard Remote Control IMAGE button Select the desired image mode among Dynamic , Standard , Real , Cinema , Image 1 , Image 2 , Image 3 , and Image 4 by pressing the IMAGE button on the remote control. Picture mode with improved ...

  • Sanyo PDG-DWL2500 - page 44

    44 V ideo Input Image Adjustment 1 2 Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63). Press the Point 7 button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Press the Point 7 button to lighten red tone; press the Point 8 button to d ...

  • Sanyo PDG-DWL2500 - page 45

    45 V ideo Input Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast ( Default , 1.8 , 2.0 , 2.2 , 2.4 , or 2.6 ). Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15). An interlaced video signal can be displayed in progr ...

  • Sanyo PDG-DWL2500 - page 46

    46 V ideo Input This projector has the picture screen resize function, which enables you to customize the image size. Screen Size Adjustment Screen Menu 1 2 Adjust the screen scale and position manually with this function. Press the Point 8 button at Custom adj. and the Custom adjustment menu is displayed on the screen, you can use the Point ed but ...

  • Sanyo PDG-DWL2500 - page 47

    47 V ideo Input Keystone This function is used to adjust keystone distortion of the projected image. Use the Point ed buttons to choose the item you want to adjust. Keystone T o correct keystone distortion, press the SELECT button. Keystone appears on the screen. Use the Point ed buttons to correct keystone distortion (p.26). Store or Reset T o sto ...

  • Sanyo PDG-DWL2500 - page 48

    48 3D Display For V iewing 3D Contents Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Infrared Emitter 3D SYNC OUT Sync Signal Cable (Supplied with the IR Emitter) Stereoscopic Wireless LCD Glasses 3D SYNC Input When using DLP Link compatible glasses, follow these steps: 1. T urn on ...

  • Sanyo PDG-DWL2500 - page 49

    49 - The optimum 3D viewing distance from the screen is about 3 m or more and your eyes should be level with the screen. - Viewing 3D images for an extended period of time or viewing them from an oblique angle can cause eye strain. - T ake breaks when viewing 3D images for an extended period of time. As this may cause eye fatigue. - Some image sour ...

  • Sanyo PDG-DWL2500 - page 50

    50 The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Finnish, Norwegian, Danish, Polish, Hungarian, Romanian, Russian, Brazilian Portuguese, T urkish, Arabic, Kazakh, Simplified Chinese, T raditional Chinese, Korean, Japanese and Thai. Setting Menu Setting Setting Press th ...

  • Sanyo PDG-DWL2500 - page 51

    51 Input search This function detects the input signal automatically . When a signal is found, the search will stop. Use the Point ed buttons to select one of the following options. Off ......... Input search dose not work. On 1 ....... Input search works under the following situation. – When pressing the AUT O SET button on the remote control. O ...

  • Sanyo PDG-DWL2500 - page 52

    52 This function is used to memorize the Zoom adjustment with the ZOOM +/- buttons on the top control (p.25). Press the Point ed buttons to select Reset, Store1 or Store2. Reset . . . Reset the Zoom adjustment when the projector is turned off or the AC power cord is unplugged. Store1 . . Store the Zoom setting even when the projector is turned off. ...

  • Sanyo PDG-DWL2500 - page 53

    53 This function decides whether to display On-Screen Displays. On ........................... Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is this option. Countdown off ....... Show the input image instead of the countdown when turning on the pr ...

  • Sanyo PDG-DWL2500 - page 54

    54 Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select Y es to capture the projected image. After capturing the projected image, go to the Logo select function and set it to Us ...

  • Sanyo PDG-DWL2500 - page 55

    55 Enter a Logo PIN code Use the Point ed buttons to enter a number . Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to [ . If you fixed an incorrect number , use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number . Repeat this st ...

  • Sanyo PDG-DWL2500 - page 56

    56 Setting This function is only used for HDMI input source. Image Select Normal or Enhanced to match the video range setting of your HDMI Digital RGB equipment. Sound HDMI .......... When using the HDMI cable, select HDMI . Both video and audio* are transferred and you need not to connect any additional cables for audio. * This HDMI terminal suppo ...

  • Sanyo PDG-DWL2500 - page 57

    57 Setting T imer left before Lamp is off . Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready .................. When the lamp has been fully cooled down, ...

  • Sanyo PDG-DWL2500 - page 58

    58 Setting Closed Caption is a function that displays the audio portion of a TV program as text on the screen. If the input signal contains Closed captions, you can turn on the feature and switch the channels. Press the Point ed buttons to select Off , CC1 , CC2 , CC3 or CC4 . If the Closed caption is not clear , you can change the text from Color ...

  • Sanyo PDG-DWL2500 - page 59

    59 Setting This function allows you to use the Key lock and the PIN code lock function to set the security for the projector operation. Key lock Key lock PIN code lock This function locks the top control and remote control buttons to prevent operation by unauthorized persons. . . . . . Unlocked. . . . . . Lock the operation of the top control. T o ...

  • Sanyo PDG-DWL2500 - page 60

    60 Setting Use the Point ed buttons to select Off , On 1 or On 2 . Press the SELECT button to close the dialog box. Change the PIN code lock setting Enter a PIN code Use the Point ed buttons to enter a number . Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to [ . If you fixed an incorr ...

  • Sanyo PDG-DWL2500 - page 61

    61 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.22). L 1 ..... Normal operation L 2 ..... Slower , lower-sound and longish-time than the normal operation ( L1 ). This function is used to display the cumulative lamp operating time and reset the lamp counter . When the total ...

  • Sanyo PDG-DWL2500 - page 62

    62 This function returns all setting values except for the User logo , PIN code lock , Logo PIN code lock , Lamp counter and Filter counter to the factory default settings. Factory default Setting This function is used to set a frequency for the filter replacement. Use the Point ed buttons to select Filter counter and then press the Point 8 or the ...

  • Sanyo PDG-DWL2500 - page 63

    63 Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector . The information menu changes each time you press the INFO. button on the remote control as follows. page 1/2 a page 2/2 a hide a page 1/2 a • • • • • While the information menu i ...

  • Sanyo PDG-DWL2500 - page 64

    64 The W ARNING TEMP . indicator shows the state of the function which protects the projector . Check the state of the W ARNING TEMP . indicator and the POWER indicator to take proper maintenance. W ARNING TEMP . indicator The projector is shut down and the W ARNIN TEMP . indicator is blinking red. When the temperature inside the projector reaches ...

  • Sanyo PDG-DWL2500 - page 65

    65 Be sure to reset the Filter counter after replacing the Filter . Resetting the Filter Counter Maintenance and Cleaning T urn off the projector , and unplug the AC power cord from the AC outlet. First, clean up the dust on the projector and around the air vents. 1 2 Filter prevents dust from accumulating on the optical elements inside the project ...

  • Sanyo PDG-DWL2500 - page 66

    66 Cleaning the Projector Cabinet Cleaning the Projection Window Unplug the AC power cord before cleaning. First, remove the dust with a commercially available air blower . Then gently wipe the projection window surface. Use a cleaning paper moistened with methyl alcohol (methanol). Avoid using an excessive amount of cleaner . Do not use abrasive c ...

  • Sanyo PDG-DWL2500 - page 67

    67 When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow . Replace the lamp with a new one promptly . The timing when the LAMP REPLACE indicator should light is depending on the lamp mode. For continued safety , replace with a lamp of the same type ...

  • Sanyo PDG-DWL2500 - page 68

    68 This projector uses a high-pressure lamp which must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. l Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same life for each lamp. Some lamps may fail or terminate their life in ...

  • Sanyo PDG-DWL2500 - page 69

    69 Appendix T roubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on pages 16-18. – Make sure all equipment is connected to AC outlet and the power is turned on. – When the projector does not pro ...

  • Sanyo PDG-DWL2500 - page 70

    70 Appendix Problem Solutions Pages Image Image is out of focus. q Adjust focus of the projector . 25 q Provide proper distance between the projector and the projection screen. 15 q Check the projection window to see if it needs cleaning. 66 q Moving the projector from a cool to warm place may result in moisture condensation on the projection lens. ...

  • Sanyo PDG-DWL2500 - page 71

    71 Appendix W ARNING : High voltages are used to operate this projector . Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center . Specify the model number and explain about the problem. We will advise you how to obtain serv ...

  • Sanyo PDG-DWL2500 - page 72

    72 Menu T ree Mode 1 Mode 2 SVGA 1 - - - - T otal dots Horizontal V ertical Reset Computer Input PC adjust Mode 1 ~10 Screen Y es / No * Systems displayed in the System Menu vary depending on an input signal. Computer Input/HDMI Input/Video Input Sound V olume Mute On / Off Sound 0-63 Clamp Store Mode free System (1) Mode 1 ~10 Scale H&V Positi ...

  • Sanyo PDG-DWL2500 - page 73

    73 P AL SECAM NTSC NTSC 4.43 P AL-M P AL-N 1080i 720p 575p 480p 575i 480i Dynamic Real Image 1 Image 2 Image 3 0-63 0-63 Off / L1 / L2 / Film Image select System (2) System (3) Image adjust Contrast Brightness Color T int Red Green Blue Sharpness Reset Store Gamma Progressive 0-63 0-63 0-63 0-15 Default / 1.8 / 2.0 / 2.2 / 2.4 / 2.6 Image 1 Y es/No ...

  • Sanyo PDG-DWL2500 - page 74

    74 Check the indicators for projector condition. • • • on. ] / v • • • Differs according to conditions. • • • blinking. Indicators and Projector Condition Appendix Indicators POWER W ARNING TEMP . LAMP REPLACE 3D Projector Condition Red/Green Red Y ellow Blue Normal Condition The projector is off. (The AC power cord is unplugged.) ...

  • Sanyo PDG-DWL2500 - page 75

    75 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V -, H- Frequency mentioned below and less than 150 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. 4 Note: • The mark " 4 " indicates that the 3D image can be projected. • Alphabet letter " ...

  • Sanyo PDG-DWL2500 - page 76

    76 Appendix 4 Note: • The mark " 4 " indicates that the 3D image can be projected. • Alphabet letter "i" placed beside some of the resolutions represents interlace signal. • The specifications are subject to change without notice. • Depending on your PC settings, the digital signals of your PC may not be projected correc ...

  • Sanyo PDG-DWL2500 - page 77

    77 T echnical Specifications Mechanical Information Projector T ype Multi-media Projector Dimensions (W x H x D) 12.6" x 6.7" x 15.2" (321.0 mm x 170.0 mm x 385.0 mm) (Not including protrusions) Net Weight 13.7 lbs (6.2 kg) Feet Adjustment ±1.0˚ DLP Chip Projection System 0.65" Single DLP chip, 6 segment Color Wheel Number of ...

  • Sanyo PDG-DWL2500 - page 78

    78 Appendix Model No. SCART -VGA Cable : POA-CA-SCART COMPONENT -VGA Cable : POA-CA-COMPVGA VGA Cable (10 m) : KA-MC-DB10 Ceiling Hanger : POA-CHS-PS02 (for low ceiling) : POA-CHL-PL02 (for high ceiling) : POA-CHB-DWL2500 The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales dea ...

  • Sanyo PDG-DWL2500 - page 79

    79 COMPUTER IN 1 /COMPONENT IN (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of T erminals Red(R/Cr) Input Ground (Horiz.sync.) Green(G/Y) Input ----- Blue (B/Cb) Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 5V Power Horiz. sync. Input (Composite H/V sync.) Ground (V ert.sync.) DDC Data Ground V ert. sync ...

  • Sanyo PDG-DWL2500 - page 80

    80 Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the service center . PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* Put the label below (supplied) on in a prominent place of the project ...

  • Sanyo PDG-DWL2500 - page 81

    81 Dimensions Appendix 3.05 (77.5) 7.01 (178.0) 12.64 (321.0) 6.69 (170.0) 5.30 (134.6) 4.95 (125.8) 4.51 (1 14.5) 4.25 (107.9) 4.10 (104.2) 0.39 (10.0) 4.61 (1 17.0) 3.07 (78.0) 1 1.46 (291.0) 8.94 (227.0) 15.16 (385.0) Screw Holes f or Ceiling Mount Screw: M4 Depth: 0.63 (16.0) Unit: inch(mm) Screw Holes for Ceiling Mount Screw: M4 Depth: 0.63(16 ...

  • Sanyo PDG-DWL2500 - page 82

    KG8AC ...

Manufacturer Sanyo Category Projector

Documents that we receive from a manufacturer of a Sanyo PDG-DWL2500 can be divided into several groups. They are, among others:
- Sanyo technical drawings
- PDG-DWL2500 manuals
- Sanyo product data sheets
- information booklets
- or energy labels Sanyo PDG-DWL2500
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sanyo PDG-DWL2500.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sanyo PDG-DWL2500, service manual, brief instructions and user manuals Sanyo PDG-DWL2500. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sanyo PDG-DWL2500.

Similar manuals

A complete manual for the device Sanyo PDG-DWL2500, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sanyo PDG-DWL2500 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sanyo PDG-DWL2500.

A complete Sanyo manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sanyo PDG-DWL2500 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sanyo PDG-DWL2500, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sanyo PDG-DWL2500, that we can find in the current document
3. Tips how to use the basic functions of the device Sanyo PDG-DWL2500 - which should help us in our first steps of using Sanyo PDG-DWL2500
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sanyo PDG-DWL2500
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sanyo PDG-DWL2500 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sanyo PDG-DWL2500?

Use the form below

If you did not solve your problem by using a manual Sanyo PDG-DWL2500, ask a question using the form below. If a user had a similar problem with Sanyo PDG-DWL2500 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)