English dropdown-ico

Manual Omega Vehicle Security OM-420

8 pages 0.04 mb
Download

Go to site of 8

Summary
  • Omega Vehicle Security OM-420 - page 1

    USING THE RPS-1in the OM-420 Omega Engineering Inc. 1 Stamford, CT USING THE RPS-1, RECHARGEABLE POWER SUPPLY IN THE OM-420 OVERVIEW: The RPS-1 is a self-contained battery power source for use in conjunction with the OM-320/420 System Base to power transducers requiring external power (e.g. Strain Gages, Pressure transducers, 4 to 20ma Loop Transmi ...

  • Omega Vehicle Security OM-420 - page 2

    USING THE RPS-1in the OM-420 Omega Engineering Inc. 2 Stamford, CT An integral State-of-Charge (SOC) indicator is provided which will display an approximate Battery State-of- Charge based on battery voltage under a fixed load. Test is actuated by depressing a momentary SOC Test Switch. HARDWARE / USER CONTROLS: Figure 1 illustrates the functional b ...

  • Omega Vehicle Security OM-420 - page 3

    USING THE RPS-1in the OM-420 Omega Engineering Inc. 3 Stamford, CT CONTROL INPUT Two terminal connections are provided for connection of a low voltage power supply control signal. This input signal controls the ON/OFF cycling of power supplies set to the AUTO mode. Typically, this control input is controlled by a OM-320/420 Digital Output. STATE-OF ...

  • Omega Vehicle Security OM-420 - page 4

    USING THE RPS-1in the OM-420 Omega Engineering Inc. 4 Stamford, CT The MODE switch (bottom or eighth switch) should be set for the desired operation, AUTO or ON. AUTO mode configures the supply to cycle ON and OFF per the state of the control signal coming from an external device (OM-320/420). When the CONTROL INPUT signal (connected on the four po ...

  • Omega Vehicle Security OM-420 - page 5

    USING THE RPS-1in the OM-420 Omega Engineering Inc. 5 Stamford, CT voltage is set to 12 VDC or higher output. For 12VDC or higher power supply OUTPUT VOLTAGE settings, the MAIN POWER SWITCH must be set to 24VDC. In the 12VDC mode, the two batteries are in parallel, hence the amp hour capacity is doubled (i.e. approx. 4AH). In the 24VDC mode, the tw ...

  • Omega Vehicle Security OM-420 - page 6

    USING THE RPS-1in the OM-420 Omega Engineering Inc. 6 Stamford, CT held down for approximately 10 seconds to dissipate any battery surface charge and give the most consistent reading. Best SOC readings are given with both power supplies off and no charging current. If the supplies are delivering current to an external load, the SOC will indicate sl ...

  • Omega Vehicle Security OM-420 - page 7

    USING THE RPS-1in the OM-420 Omega Engineering Inc. 7 Stamford, CT BATTERY REPLACEMENT NOTE: USE CAUTION IN WORKING WITH THE GEL-CELL BATTERIES TO PREVENT SHORTING OF THE TERMINALS OR WIRING AT ALL TIMES! Under reasonable operating conditions and temperatures, the two gel-cell batteries should provide several hundred charge/discharge cycles. When t ...

  • Omega Vehicle Security OM-420 - page 8

    USING THE RPS-1in the OM-420 Omega Engineering Inc. 8 Stamford, CT PROBLEM: Batteries are fully discharged. SOLUTION: Charge the batteries. SYMPTOM: STATE-OF-CHARGE INDICATOR SHOWS LESS THAN FULL PROBLEM: Batteries are slightly discharged SOLUTION: Charge PROBLEM: Power supplies are ON dropping the battery voltage SOLUTION: Turn off supplies before ...

Manufacturer Omega Vehicle Security Category Welding System

Documents that we receive from a manufacturer of a Omega Vehicle Security OM-420 can be divided into several groups. They are, among others:
- Omega Vehicle Security technical drawings
- OM-420 manuals
- Omega Vehicle Security product data sheets
- information booklets
- or energy labels Omega Vehicle Security OM-420
All of them are important, but the most important information from the point of view of use of the device are in the user manual Omega Vehicle Security OM-420.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Omega Vehicle Security OM-420, service manual, brief instructions and user manuals Omega Vehicle Security OM-420. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Omega Vehicle Security OM-420.

Similar manuals

A complete manual for the device Omega Vehicle Security OM-420, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Omega Vehicle Security OM-420 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Omega Vehicle Security OM-420.

A complete Omega Vehicle Security manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Omega Vehicle Security OM-420 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Omega Vehicle Security OM-420, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Omega Vehicle Security OM-420, that we can find in the current document
3. Tips how to use the basic functions of the device Omega Vehicle Security OM-420 - which should help us in our first steps of using Omega Vehicle Security OM-420
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Omega Vehicle Security OM-420
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Omega Vehicle Security OM-420 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Omega Vehicle Security OM-420?

Use the form below

If you did not solve your problem by using a manual Omega Vehicle Security OM-420, ask a question using the form below. If a user had a similar problem with Omega Vehicle Security OM-420 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)