English dropdown-ico

Manual Graco 312964C

20 pages 1.47 mb
Download

Go to site of 20

Summary
  • Graco 312964C - page 1

    The Matr ix Tank Lev el Monitor co ntains an R F device w ith the fo llowing appro vals: FCC ID: TFB-FREEST AR IC: 5969A-FREEST AR Industry Canada Statement The term “IC” before t he certification/reg istra- tion number only signifies tha t the Industr y Canada technical specifications were met. ✓ N14939 - FREESTAR ZFMSM-101 -1 (CEL) / FS24-1 ...

  • Graco 312964C - page 2

    Warnings 2 312964C Wa r n i n g s The f ollowing warnings are f or the setup , use, groundin g, maintenance, and repair of this equ ipment. The exclama- tion point symbol alerts you to a gener al warning and the hazard symbol ref ers to procedure -specific risk. Refer bac k to these wa r nings. Additional, pr oduct- specific warnings ma y be found ...

  • Graco 312964C - page 3

    Set Up 312964C 3 Set Up Dips witch Settings The TLM has two , 4 - position dips witches labeled S1 and S2. TLM dips witches must be set to match those of the transceiver the TLM will be communicating with. The f actor y default setting for all TL M’ s is (‘1’ ‘1’). The first ‘1’ refers to the Network ID and the sec ond ‘1’ refers ...

  • Graco 312964C - page 4

    Set Up 4 312964C 7. Install tw o, 9-v olt alkaline batteries (1). Be sure that the batter ies fully engage the mounting clips by pushing on the botto m of each battery with your thumb . 8. Replace insulating f oam (4). 9. Replace co ver (7) and secure it with the f our screws (3). It will take about 30 seconds f or the monitor to dis- play inf or m ...

  • Graco 312964C - page 5

    Set Up 312964C 5 Dipswitc h Setting for Netw ork ID and T ransceiver ID See F IG . 3 f or dips witch setting configur ations. b The batteries must be di sconnected and remov ed before changi ng dips witch settings or the TLM will not be able to communic ate with the PC software. F IG . 3 1 - def ault S2 Transceiver ID 12 3 4 S2 on 2 12 3 4 S2 on 3 ...

  • Graco 312964C - page 6

    Set Up 6 312964C Registering the TLM Graco recommend s registering TLM prior to installa- tion. The TLM operating pa rameters are cont rolled by the Matrix PC Software and setup by the System Adminis- trator . See the Matrix 3 Software instruction manual f or the PC setup instructions. T o regist er the TLM : 1. Set TLM to correct NETWORK ID and TR ...

  • Graco 312964C - page 7

    TLM Display 312964C 7 TLM Displa y (See F IG . 6, page 8) TLM ID - Unique number assign ed to the TLM to distin- guish it from oth er TLM’ s in the syst em. Batter y Life - Remaining lif e of the unit’ s batter ies. Sys- tem Administrator on Matr ix PC Software d eter mines when Low Batter y W ar n ing message is ge nerated. Netw ork ID and T r ...

  • Graco 312964C - page 8

    TLM Registration Process 8 312964C TLM Registration Pr ocess F IG . 5 Press & Hold DISPLA Y button Battery NW ID TX ID REGISTER MODE Ack received from T ransceiver No Ack received from T ransceiver TLM ID TLM ID TLM ID BLANK BLANK VERSION xx.xx.xx VERSION xx.xx.xx PC Responds with Registration Ack Message PC doesn’t Respond REGISTER COMPLETE ...

  • Graco 312964C - page 9

    Installation 312964C 9 Installation 1. Remo ve the b ung fitting and scre w in the TLM hand-tight. DO NOT use a wrench to tighte n as this ma y damage the TLM. Do not use thre ad lock adhe- siv e as this may d amage the TLM. 2. The TLM m ust be mounted with in 2 degrees from per pendicu lar to the surface of the fluid. A lev el that measures degr e ...

  • Graco 312964C - page 10

    Viewing Data 10 312964C Vie wing Data Press and release th e Display b utton (A). Data appears on displa y (B); each screen lasting a f ew seconds bef ore going on to the next. See F IG . 8. After a tank is refilled from an oil distributor or a waste oil tank is emptied b y a waste oil ser vice provide r , press the Display b utton on the TLM to en ...

  • Graco 312964C - page 11

    Troubleshooting 312964C 11 T r oubleshooting Prob lem Cause Solution Brand new monitor’ s dis- pla y is very dim. Unit is shipped with protective coat- ing o ver displa y . Remo ve protecti ve coating. Monitor displays “In valid Reading”. The TLM reading is outside of the programmed size parameters. V er ify the programmed parame te rs and re ...

  • Graco 312964C - page 12

    Troubleshooting 12 312964C Monitor readings are inaccurate. T a nk geometr y incorrectly defi ned. See T ank Lev el Monitor Software Guide or PC Software Guide fo r d e t a i l s . T a nk Lev el Monitor has not be en updated with latest adjustments made within The profile ID on the PC . Manually pu sh DISPLA Y button on TL M T wo TLMs are pr ogramm ...

  • Graco 312964C - page 13

    Service 312964C 13 Service Once the T ank Lev el Monitor has been in stalled, no additional maintenance or ser vice is necessar y , with the excep- tion of replac ing batteries. Replacing Batteries Alwa ys repl ace bot h batteries with two new 9- volt alkaline batte r ies whene ver y ou change batteries in the TLM. 1. Remove the four cov er screws ...

  • Graco 312964C - page 14

    Parts 14 312964C Pa r t s 3 2 1 1 Remov e protective cov er used for shipping before programming. Do not remov e. This is required to mainta in intrinsic safety approv al. 1 2 4 2 ti12033a 5 6 7 8 9 10 Ref. No. P ar t No. Description Qty 1 BA TTER Y , 9 volt (purch ased locally) 2 2 126752 GASKET , sensor , ultr asonic 1 3 117467 SCREW , self tappi ...

  • Graco 312964C - page 15

    Technical Data 312964C 15 Te c h n i c a l D a t a NO TE: FCC, C-Tic k and IC approvals are f or the RF device contained in the Matrix T ank Lev el Monitor (TLM). Ultrasonic T ank Depth Measurement rang e 0 - 30 ft. (0 - 9 m) Not f or use in pressurized t anks. Fluid Le vel Me asurement Accuracy +/- 0.5% Mounting Standard 2 in. (n pt) bung. Height ...

  • Graco 312964C - page 16

    Dimensions 16 312964C Dimensions A 9.1 in (231 mm) B 4.9 in. (124 mm) 1-1/2 in. npt A B 2 in. npt ti12031a ...

  • Graco 312964C - page 17

    Tank Geom etry 312964C 17 Ta n k G e o m e t r y V ertical T ank: • Maximum V olume = 999, 999 gallons or liters . • T ank walls must be uniformly ve r tical from empty lev el to full F IG . 10 ti12693a Maximum Height 30 ft. (360 in.) ...

  • Graco 312964C - page 18

    Tank Geomet ry 18 312964C Cylindrical T ank: • Maximum V olume = 999, 999 gallons or liters . • T ank end walls m ust be flat; th ey cannot be any other shape , including belled. F IG . 11 ti12695a Maximum Length Maximum Height 30 ft. (360 in) 30 ft. (360 in) ...

  • Graco 312964C - page 19

    Tank Geom etry 312964C 19 Obround T ank: • Maximum V olume = 999, 999 gallons or liters . • T ank end walls m ust be flat; the y cannot be any other shape inclu ding belled. F IG . 12 ti12694a Maximum Width 30 ft. (360 in .) Maximum Length Maximum Height 30 ft. (360 in) 30 ft. (360 in) ...

  • Graco 312964C - page 20

    All written and visual data contained in this document reflects the latest product information available at the time of publica tion. Graco reserves the right to make changes a t any time without notice. For patent information, see www.graco.com/patents. Original Instructions. This m anual co ntains English. MM 312964 Graco Headquarters: Minneapoli ...

Manufacturer Graco Category Marine Sanitation System

Documents that we receive from a manufacturer of a Graco 312964C can be divided into several groups. They are, among others:
- Graco technical drawings
- 312964C manuals
- Graco product data sheets
- information booklets
- or energy labels Graco 312964C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graco 312964C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graco 312964C, service manual, brief instructions and user manuals Graco 312964C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graco 312964C.

Similar manuals

A complete manual for the device Graco 312964C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graco 312964C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graco 312964C.

A complete Graco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graco 312964C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graco 312964C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graco 312964C, that we can find in the current document
3. Tips how to use the basic functions of the device Graco 312964C - which should help us in our first steps of using Graco 312964C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graco 312964C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graco 312964C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graco 312964C?

Use the form below

If you did not solve your problem by using a manual Graco 312964C, ask a question using the form below. If a user had a similar problem with Graco 312964C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)