Manual Diamond Audio Technologies D3 1000.1

12 pages 3.16 mb
Download

Go to site of 12

Summary
  • Diamond Audio Technologies D3 1000.1 - page 1

    D3 400.2 | D3 500.4 | D3 600.1 | D3 1000.1 AMPLIFIER INST ALL A TION MANUAL ...

  • Diamond Audio Technologies D3 1000.1 - page 2

    2 Congratulations! Thank you f or choosing a Diamond Audio T echnologies D3 Series amplier . We sincerely believe that DA T products offer you outstanding per - formance and value. DAT products are engineered and produced with the highest quality materials and incorporate the latest technology . We think you will nd your new DA T amplier m ...

  • Diamond Audio Technologies D3 1000.1 - page 3

    3 Fr equency Response: 20Hz to 20KHz +/-3 dB Signal to Noise Ratio: > 95dBA (20 to 20kHz) Channel Separation 50dB THD+N(T otal Harmonic Distortion + Noise) < 0.2% (Output-1W 4 Ohms) RCA Input Sensitivity: 150mV to 4V RCA Input Impedance: > 20K Ohms Min to Max V oltage r equir ements 10.2V to 15.5V DC High/Low Pass Cr ossover: 12dB/Oct, 30- ...

  • Diamond Audio Technologies D3 1000.1 - page 4

    4 Connections and Contr ols This section describes how all of the terminals and adjustments of D A T D3 Series ampliers function. D3 400.2 2-Channel Amplifier 218 x 57.5mm D3.400.2 D3.600.1 D3.500.4 D3.1000.1 25A 25A 30A 30A 25A 25A 25A 30A 30A 30A 30A 0dB +12dB 0dB +12dB L R L R GAIN MIN MAX BASS BOOST 0dB +12dB HPF 30Hz BASS BOOST 0dB +12dB P ...

  • Diamond Audio Technologies D3 1000.1 - page 5

    5 RCA Input and Pass-Thru Output - These RCA jacks allo w for a normal Left and Right channel signal input. Simpl y connect to the sourc e unit using RCA type audio cable s, keeping them away from power wiring wherever possible. On the 4 channel amplifiers (D3 500.4) “Fr ont” and “Rear” input jacks are presen t as well as a “Pass-Thru” ...

  • Diamond Audio Technologies D3 1000.1 - page 6

    6 Installation Guidelines T ools and Supplies Listed bel ow ar e the tools and supplies needed to compl ete this ins tallation: • V olt/Ohm Meter • Wir e stripper s and wir e cutters • #2 Phillips scr ewdriver • Battery post wr ench • Hand held drill w/assorted bits • High quality el ectrical tape or heatshrink tubing • Soldering ir o ...

  • Diamond Audio Technologies D3 1000.1 - page 7

    7 Mounting Locations Engine Compartment Never mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warr anty . T runk Mounting Mounting the amplier vertic ally will pr ovide adequate cooling of the amplier . If you will be mounting it to an exis ting panel, be sur e it’ s not pr one to e xc e ...

  • Diamond Audio Technologies D3 1000.1 - page 8

    8 3) T rim the power cabl e within 18 inches (45.7mm) of the positive battery post and splice in a in-line fuse holder . DO NOT inst all the fuse at this time. 4) Strip 1/2 inch (12.7mm) from the battery end of the power cable and crimp a lar ge ring terminal to the cabl e. Connect the ring terminal to the positive (+) battery pos t. 5) Pr epa r e ...

  • Diamond Audio Technologies D3 1000.1 - page 9

    9 25A 25A 25A FUSE REM GND +12V BRIDGE L R – – + + + – Connecting Multiple Speak ers If you must connect more than one speaker per channel, there ar e two methods in which to do so: Series or Parall el. Parall el connections are harder on the amplier than series connections, as the total impedance is low er compar ed to driving a singl e s ...

  • Diamond Audio Technologies D3 1000.1 - page 10

    10 Installing the Remote Le vel Contr oller The D3 600.1 and the D3 1000.1 come packaged with a r emote le vel contr ol. This allows you to contr ol the lev el by attenuating the amplitude or increasing (up to the maximum set-point) of the amplier’ s input gain contr ol. This contr ol does not add additional bass boost, it simply allo ws you t ...

  • Diamond Audio Technologies D3 1000.1 - page 11

    11 Adjustment of Built-In Cros sover (All Models) Placing the switch in the HP position sets the amplier to the High Pass mode, enabling fr equencies above the cut off point to pass. Placing the switch in the LP position sets the amplier to the Low Pass mode, enabling frequencies belo w the cutoff point to pas s. Placing the switch in the OFF ...

  • Diamond Audio Technologies D3 1000.1 - page 12

    041807 Diamond Audio W arr anty Diamond Audio T echnol ogies, LL C (D A T) warrant s this pr oduct to be fr ee fr om def ects in mate- rial and workmanship for a period of one (1) year fr om the original date of pur chase pr ovided it was pur chased from an authorized DA T r etail er within the United States. Howev er, if this pr oduct was install ...

Manufacturer Diamond Audio Technologies Category Stereo Amplifier

Documents that we receive from a manufacturer of a Diamond Audio Technologies D3 1000.1 can be divided into several groups. They are, among others:
- Diamond Audio Technologies technical drawings
- D3 1000.1 manuals
- Diamond Audio Technologies product data sheets
- information booklets
- or energy labels Diamond Audio Technologies D3 1000.1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Diamond Audio Technologies D3 1000.1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Diamond Audio Technologies D3 1000.1, service manual, brief instructions and user manuals Diamond Audio Technologies D3 1000.1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Diamond Audio Technologies D3 1000.1.

Similar manuals

A complete manual for the device Diamond Audio Technologies D3 1000.1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Diamond Audio Technologies D3 1000.1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Diamond Audio Technologies D3 1000.1.

A complete Diamond Audio Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Diamond Audio Technologies D3 1000.1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Diamond Audio Technologies D3 1000.1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Diamond Audio Technologies D3 1000.1, that we can find in the current document
3. Tips how to use the basic functions of the device Diamond Audio Technologies D3 1000.1 - which should help us in our first steps of using Diamond Audio Technologies D3 1000.1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Diamond Audio Technologies D3 1000.1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Diamond Audio Technologies D3 1000.1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Diamond Audio Technologies D3 1000.1?

Use the form below

If you did not solve your problem by using a manual Diamond Audio Technologies D3 1000.1, ask a question using the form below. If a user had a similar problem with Diamond Audio Technologies D3 1000.1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)