English dropdown-ico

Manual TRENDnet Cable Modem/xDSL TW100-W1CA

49 pages 1.16 mb
Download

Go to site of 49

Summary
  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 1

    M73 - APO07 - 080 TW100 - W1CA IP Sharing for Cable Modem/x DSL User Manual ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 2

    FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable prot ection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, i ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 3

    TABLE OF CONTENT INTROUCTION ....................................................................................................................................... 1 S AMPLE A PPLICATION ..................................................................................................................... 1 F EATURES ................................ ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 4

    P ERFORMING F IRMWARE U PGRADE .............................................................................................. 28 CHANGING PASSWORD .................................................................................................................. 31 F OR GUI ............................................................................ ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 5

    - 1 - INTROUCTION IP Share device is designed for IP address simplification and conservation, as it enables private IP Internet works that use non - registered IP addresses to connect to the Internet. It usually c onnects two networks together, and translates the private (not globally unique) addresses in the internal network into single legal addr ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 6

    - 2 - Features ? ? Supports PPPoE. ? ? Supports VPN.(PPTP pass through). ? ? Explicit LED indication for Internet connection. ? ? Supports Internet applications such as Web, ICQ, FTP, Telnet, E - Mail, News, NetMeeting, PCAnyWhere, mIRC , CuSeeMe, AoE,… ? ? Natural firewall keeps hackers out. ? ? DHCP server allocates up to 128 client IP addresse ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 7

    - 3 - LED Color Status Indicator Glowing Dim Flashing ? Power Green Power On Power Off N/A. ? Local Link Green Connected to a LAN de vice Disconnected from any LAN device Receiving/ Sending data ? Local 100/10 Green 100Mbps detected 10Mbps detected N/A. ? Local Full/Half Green Full duplex Half duplex N/A. ? Global Link Green Connected to a Cable/DS ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 8

    - 4 - System Requirements Your system must meet the following requirements to use the product’s Setup program. If you are using a Unix or apple based system, telnet should be used t o configure the product. This product's GUI setup interface requires 1. Windows 95, 98, ME, NT or 2000. 2. IE4.01 or above well - installed. Telnet and Terminal ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 9

    - 5 - FACTORY DEFAULT SETT INGS P assword The default setting for password has been left blank in the factory. Press Enter then you are logged in for the first time. It is recommended that you set a password for security and management purpose. If you ever forget the password to log in, you can only reset the factory se tting. Refer to the next sec ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 10

    - 6 - CONFIGURATION The product can be configured through the setup program (included in the package), through a terminal emulation program, such as W indows HyperTerminal, or through Telnet. The product can be set with a range of options to allow it to function in most any network environment. Configuration in GUI How to start 1. For the first tim ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 11

    - 7 - Figure 5 Select the device that you would like to setup and then click Configure . Figure 6 The configure dialog box is categorized into several tabs as shown in the following. Management Figure 7 ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 12

    - 8 - Firmware Version : Read - only. Device/Computer Name: For you to enter a descriptive name for identification purpose. Some Internet Service Providers (ISP) requires this information. The Maximum input for this field is 20 alphanumeric characters and it is case sensitive. Domain Name 2 : For example: yourcompany.com . The maximum input for thi ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 13

    - 9 - TELNET management… : Checking this item lets you manage this devic e remotely from outside of the network through Telnet. ?? Default: disabled. Local Port This screen contains settings for LAN interface attached to the local network. Figure 8 IP Address ?? Default: 192.168.1.254 SubNetmask ?? Default: 255.255.255.0 ? Do not distribute IP ad ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 14

    - 10 - Continuous IP address pool starts at The starting address of this local IP network address pool. The pool is a piece of continous IP address segment. Number of IP address in pool ?? Maximum: 128 . Default: 128 Global Port This screen contains settings for the Global interface toward Internet. Figure 9 Adapter Address : Read - only. It is nec ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 15

    - 11 - SubNetmask 4 : Provided by our ISP. Gateway/DNS server #1/DNS server #2: These values will be automatically provided once you clic k “ Obtain global port configuration automatically ”. You can change the values if necessary. Virtual Server Being a natural Internet firewall, this IP Sharing device protects your network from being accessed ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 16

    - 12 - Figure 11 Port Type : please select the port type (TCP or UDP) for the port number that was entered earlier. Note: Maximum 12 Server Entries is allowed. Each po rt number can only be assigned to one IP address. Packet Filters In the Packet Filters setup screen, you can block specific internal users from accessing the Internet and you can als ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 17

    - 13 - Figure 12 Network Adapter Address Filter: Filter according to local computer’s network adapte r MAC address . Figure 13 Network Adapter’s MAC address consists of 12 alphanumeric characters (i.e. 00 ab 12 cd 34 ef) and it is normally printed on a sticker on the network adapter. If you have Windows 95, 98, or 98Me, go to “St art”, sele ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 18

    - 14 - Remote IP : Filter using the IP address of a remote server (i.e. Web Server) . Figure 14 TCP/UDP Port Filter TCP port : filter according to the Connection - Based Application Service on the remote server using the port number . UDP port : filter according to the Connectionless Application Service on the remote server using the port number . ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 19

    - 15 - Configuration in Terminal Program Mode You can use terminal emulation on your PC/workstation for the initial and future configuration of your product. Windows HyperTerminal or other terminal emulation applications can be used. If you prefer, a telnet session can be opened dir ectly. Telnet provides the same type of terminal emulation. For se ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 20

    - 16 - Figure 18 : COM 1 Proper ties 8. Power up the product. How to start Telnet 1. The instructions below are for using this unit at its default settings (i.e. DHCP enabled, Local Port IP address: 192.168.1.254, Subnet: 255.255.255.0). 2. Go to Start ? Run . Figure 19 3. Type “ telnet 192.168.1.254 333 ” and click on OK . If the local port’ ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 21

    - 17 - 333 Figure 20 Starting the Conf iguration 1. Once the connection is made successfully either via HyperTerminal or Telnet, the following information will appear, Dual Ethernet IP Share for Cable/xDSL Modem, version X.XX Administrator password: 2. No password is required the first time you log in. Press < ENTER> to enter Configure mode. ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 22

    - 18 - TERMINAL CO MMAND Type ? or help to list the main menu commands as below. command>help Dual Ethernet IP Share for Cable/xDSL Modem, version X.XX ======================================================= Command Description ------------------------------------------------------- help Show this message session List active internet sessions sh ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 23

    - 19 - ?? At command>, type in passwd and hit “Enter” to enter the password setup screen . ?? Password can be up to six characters long. ?? Password can contain letters, numbers, and spaces. ?? Password is case sensitive. ?? To set or change yo ur password, key in up to six characters and hit “Enter”. You will be prompted to reenter your ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 24

    - 20 - Obtain global port configuration from ISP : [Yes] .. under claiming IP address of global port : [0.0.0.0] SubNetmask of global port : [0.0.0.0] Device name : [Untitled] Domain name : [Domain] Gateway : [0.0.0.0] Primary DNS server : [0.0.0.0] Secondary DNS server : [0.0.0.0] set After executing the set command, the current settings will appe ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 25

    - 21 - SubNetmask of global port [0.0.0.0] : Device name (0 to 20 characters) [Untitled] : Domain name (0 to 36 characters) [Domain] : Gateway [0.0.0.0] : Primary DNS server [0.0.0.0] : Secondary DNS server [0.0.0.0] : New configuration will be: IP address of local port : [192.168.1.254] SubNetmask of local port : [255.255.255.0] Distribute IP addr ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 26

    - 22 - Internet to the local network are blocked. Computers outside the Intranet are allowed to access specific ports by using the vserv c ommand. There are four operation choices for vserv command: 1) Show, 2) Add, 3) Del, 0) Quit. Example: command>vserv Set local virtual server mapping (maximum 12), or <ESC> to escape Operations => 1) ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 27

    - 23 - command>release Give up the obtained global port configuration Note: if you choose NOT to obtain the global port configuration from your ISP, this command won’t be executed and the following message will appear. command>release Works only if 'Obtain global port configuration from ISP' is enabled renew You must renew the glo ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 28

    - 24 - 192.168.10.4 0080 - C8F8 - 8A64 2:55:48 Victoria 192.168.10.5 0080 - C8F8 - 8A64 expired SNL Total 5 user, 3 active lease. Elapsed 0:01:03 Ping Ping is a basic Internet program that lets you verify that a particular IP address exists and can accept requests. At command> type in ping and then the IP address that you wish to detect. If the ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 29

    - 25 - tcp 7 192.168.10.31 1033 4138 211.75.84.154 80 0 GERNERAL tcp 7 192.168.10.32 1729 4139 140.113.39.195 110 0 GERNERAL tcp 7 192.168.1 0.27 1063 4140 210.66.41.132 110 0 GERNERAL udp 1 192.168.10.31 1028 16385 168.95.192.1 53 20 GERNERAL udp 1 192.168.10.32 1726 16386 168.95.1.1 53 5 GERNERAL udp 1 192.168.10.32 1728 16387 168. 95.192.1 53 5 ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 30

    - 26 - Item Type Action From To ==== ====== ======= ================ ================ 1. MAC Filter 0080C8123456 IP address filter: Example 1 : Set IP address filter to allow those local computers with IP address fro m 192.168.0.25 to 192.168.0.32 to access Internet . Operations => 1)Show 2)Add 3)Del 0)Quit 2 Filter Type => 1)MAC 2)LAN IP 3)W ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 31

    - 27 - With the combination of the above two filter examples, the workstations with IP address 192.168.0.25, 192.168.0.26, 192.168.0.27, … and 192.168.0.32 can access the Internet via the Internet Router, but none of the workstations can access the 203.66.99.100 Web Server (web site). Port Filter Example 1: Allow users to access Web service only. ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 32

    - 28 - FIRMWARE UPGRADE System Requirements ?? O ne free COM port on PC . ?? A pin - to - pin RS - 232 cable . O ne end is 9 pin male connector, the other end is 9 or 25 pin female connector depends on the COM port. ?? FWLOAD.EXE : This is an auxiliary program for firmw are up load . ?? FIRMWARE.BIN : Th is is a f irmware image file . ?? LOAD.EXE : ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 33

    - 29 - Figure 22 5. When the following screen appears, power on the device. Figure 23 6. Expect to wait for a few seconds before the upload program detects the device. Once the device is detected, the program will start uploading the firmware automatically. The upload process takes a couple of minutes. After the upload i s completed, this device wi ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 34

    - 30 - ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 35

    - 31 - CHANGING PASSWORD The device has no password at default. It is recommended that you change the default passwords to ensure that someone cannot adj ust the devices settings. Using GUI 1. Start this device by running setup.exe as described in the chapter titled “ Configuration ”. 2. Check “Change Administrator’s Password. 3. Enter the ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 36

    - 32 - Note: In default, there is no passwo rd, so just leave this entry blank and hit “Enter” to continue. type new password (0 to 6 characters) : ****** Type in the new password and press <Enter> re - type new password (0 to 6 characters) : ****** Re - type the new password and press <Enter> Forgot y our password? Refer to FAQ sec ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 37

    - 33 - PPP OVER ETHERNET (P PPOE) What is PPPoE? PPPoE is known as a dial - up DSL service. It is designed to integrate the broadband services into the current widely deployed, easy - to - use, and low - cost dial - up - access networking infrastructure. Thus, customer can get greater access speed without changing the operation concept. How can I k ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 38

    - 34 - FAQ Factory Reset If for any reason, e.g. password being forgotten, you have to reset this device to factory default settings. By performing the Factor y Reset, the current settings will be lost and the settings are reseted to default. The fctory default values is detailed in the section Factory Default Settings . Figure 26 “I can't f ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 39

    - 35 - addresses on a LAN with an existing DHCP server may cause problems throughout a network. It is recommended you disable other DHCP serves on the network if you plan on using this product on the network. IP address conflict When you see the message box prompted for IP address conflict, this means two or more workstations has the same I P addre ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 40

    - 36 - Figure 27 B. Choose the "V irtual Server" tab: C. Enter one of the port numbers that your application requires and press "Browse". Figure 28 D. Choose the computer that is using the application and press "Select". Note: If you know the IP address of the computer that is using this application, you can enter it i ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 41

    - 37 - Figure 29 E. Press Add. Repeat this process for each individual port you need to open. Figure 30 ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 42

    - 38 - F. Press Save. Wait 30 seconds for the device to reboot and then try the application again. It may be necessary to restart your application or your computer for the application to recognize the change. Can not access the Internet For Cable Modem users, find the workstation’s “Computer” name and then input this name in the device’s ? ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 43

    - 39 - Figure 32 Check the physical connectivity of local network. Check if both the LEDs of Local and Global on the product’s front panel are g reen. If yes, go to next step. Otherwise, make sure you are using the correct cables and the cables are connected to the network devices properly. Check the physical connectivity of the broadband device ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 44

    - 40 - Diagnosis TCP/IP Network Diagnosis Execute WINIPCFG.EXE or PING.EXE for TCP/IP network diagnosis. WINIPCFG The WINIPCFG program (for Win 95, 98, and 98Me) is used to gather information about the TCP/IP connections that are active on your system. It cannot be used to dynamically adjust TCP/IP connections. You can also renew leases (if allowed ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 45

    - 41 - Figure 35 : IP Configuration On the top, the “Host Name” and “DNS server” of the computer are configured to call when it is looking for a named resource. The default gateway is the server through which the client connects to the Internet. The DHCP Server identifies the network server that assigns IP addresses to computers on the netw ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 46

    - 42 - For example, to find the server 168.95.192.1, type the following command at the MS - DOS prompt: C:>ping 168.95.192.1 . PING can be exec uted in Windows as shown below: 1. Go to the Start menu. 2. Click Run . 3. Type ping 168.95.192.1 and click OK . 4. The server (IP address) is online if the following message appears. Reply from 192.168 ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 47

    - 43 - Getting Technical Support You can also contact us for technical support. TRENDware www.trendware.com E - mail: techsupport@trendware.com Phone: 310 - 891 - 1100 ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 48

    - 44 - APPENDIX A SPECIFICA TIONS Protocols IP, NAT, ARP, I CMP, DHCP Management/Setup Locally, via direct serial cable connection through Console port Options Locally, via GUI for Windows 95/98/NT Remotely via Telnet (needs to enabled this function via GUI ) Local Port RJ - 45, 10/100 Dual Speed Ethernet Global Port RJ - 45, 10Mb Ethernet to an ex ...

  • TRENDnet Cable Modem/xDSL TW100-W1CA - page 49

    - 45 - APPENDIX B SUPPORTED INTERNET APPLICATIO NS Application Setti ngs for Outgoing Connection Setting for Incoming connection ICQ98a,99b None None Netmeeting 2.1 & 3.0 None 1503(tcp) 1720(tcp) AOE 2300 - 2400(tcp) 2300 - 2400(udp) 47624(tcp) 2300 - 2400(tcp) 2300 - 2400(udp) 47624(tcp) VDO Live None None mIRC None Non e Cu - Seeme 7648(tcp) ...

Manufacturer TRENDnet Category Network Card

Documents that we receive from a manufacturer of a TRENDnet Cable Modem/xDSL TW100-W1CA can be divided into several groups. They are, among others:
- TRENDnet technical drawings
- Cable Modem/xDSL TW100-W1CA manuals
- TRENDnet product data sheets
- information booklets
- or energy labels TRENDnet Cable Modem/xDSL TW100-W1CA
All of them are important, but the most important information from the point of view of use of the device are in the user manual TRENDnet Cable Modem/xDSL TW100-W1CA.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals TRENDnet Cable Modem/xDSL TW100-W1CA, service manual, brief instructions and user manuals TRENDnet Cable Modem/xDSL TW100-W1CA. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product TRENDnet Cable Modem/xDSL TW100-W1CA.

Similar manuals

A complete manual for the device TRENDnet Cable Modem/xDSL TW100-W1CA, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use TRENDnet Cable Modem/xDSL TW100-W1CA by users. Manuals are usually written by a technical writer, but in a language understandable to all users of TRENDnet Cable Modem/xDSL TW100-W1CA.

A complete TRENDnet manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual TRENDnet Cable Modem/xDSL TW100-W1CA - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the TRENDnet Cable Modem/xDSL TW100-W1CA, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the TRENDnet Cable Modem/xDSL TW100-W1CA, that we can find in the current document
3. Tips how to use the basic functions of the device TRENDnet Cable Modem/xDSL TW100-W1CA - which should help us in our first steps of using TRENDnet Cable Modem/xDSL TW100-W1CA
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with TRENDnet Cable Modem/xDSL TW100-W1CA
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of TRENDnet Cable Modem/xDSL TW100-W1CA in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning TRENDnet Cable Modem/xDSL TW100-W1CA?

Use the form below

If you did not solve your problem by using a manual TRENDnet Cable Modem/xDSL TW100-W1CA, ask a question using the form below. If a user had a similar problem with TRENDnet Cable Modem/xDSL TW100-W1CA it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)