English dropdown-ico

Manual Star Micronics SM-T400i-DB50

31 pages Not applicable
Download

Go to site of 31

Summary
  • Star Micronics SM-T400i-DB50 - page 1

    Mobile Printer SM-T400 I SERIES Hardware Manual ...

  • Star Micronics SM-T400i-DB50 - page 2

    <USA model> Feder al Communications C ommission Radio Frequency Interference Statemen t This device complies with P art 15 of the FCC Rules. Operation is subject to the follo wing two conditions: (1) This device may not cause harmful interference , and (2) this device must accept an y interference received , including interference that may ca ...

  • Star Micronics SM-T400i-DB50 - page 3

    T rademark acknowledgments SM-T400I : Star Micronics Co., Ltd. Notice • Allrightsreserved.Reproductionofanypartofthismanualinanyformwhatsoever ,withoutST AR’ s expresspermissionisforbidden. • Thecontentsofthismanualaresubjecttochangewithoutnotice. • ...

  • Star Micronics SM-T400i-DB50 - page 4

    Caution S ymbol This symbol is placed near the thermal head to indicat e that it may be hot. Never touch the thermal head immediately after the print er has been used. Let the thermal head cool for a f ew minutes before touching it. This symbol is placed near the thermal head to indicat e that it is easily damaged. Observe the precautions f or hand ...

  • Star Micronics SM-T400i-DB50 - page 5

    n U sing the P rinter P Some semiconducto rs can b e damaged b y static electr icity . B e sure to t urn o the prin ter when inserting or rem oving the ba ttery pack. P Do not dro p t he prin ter or hit it a gainst a ha rd ob j ect. P Do not open the prin ter cover while the print er is prin ting. P Before y ou open the prin ter cover , make sur ...

  • Star Micronics SM-T400i-DB50 - page 6

    n Oper a ting En vironmen t fo r the Printe r Befor e actually unpacking the printer , you should take a f ew minutes to think about wher e you plan to use it. Remember the follo wing points when doing this. P Do not use the prin ter in an en vironmen t in which it will be subject to stro ng shaking while it is prin ting. P Be c ar eful to ensure t ...

  • Star Micronics SM-T400i-DB50 - page 7

    T able of C onten ts 1. Pr oduc t O verview ...................................................................................... 1 1.1 Printer & Ac cessories............................................................................................................. 2 1.2 Ex ternal Appearanc e and Part Names .................................. ...

  • Star Micronics SM-T400i-DB50 - page 8

    - 1 - 1. Pr o duc t Over view This printer is perfect for mobile bank ing systems , retail, POS (point of sale) terminals and other forms of mobile computing . The characteristics of this printer are list ed below: • Compact size (150.9 ×136.6 × 63.3 mm) <Model without Card Reader> • Ex tremely light and mobile (735 g) • Upto24? ...

  • Star Micronics SM-T400i-DB50 - page 9

    - 2 - Shoulder Strap 1.1 Prin ter & A cc essories The printer is packaged with the following acc essor ies. If any of these accessories is broken or missing , please contact the dealer that you bought the pr oduc t. u The optional items f or this printer are listed below . Battery Pack Serial Communication Cable Printer paper sample Printer Bat ...

  • Star Micronics SM-T400i-DB50 - page 10

    - 3 - 1.2 External Appearanc e and P ar t Names Serial Connector Charge Connector Mechanism Black Mark Sensor Paper End Sensor Platen Gear Printer C over Platen * Remove the lms if you do not need them. Don ’t connect USB mini B cable here. Cov er Open Switch LC D Po wer Button Po wer Lamp Error Lamp * Pr otection Film < Model with Card Rea ...

  • Star Micronics SM-T400i-DB50 - page 11

    - 4 - 2. Setup 2.1 Battery Pack 2.1.1 I nserting into the Printer 1. Make sur e that the printer has been turned o befor e you insert or remove the batt er y pack. 2. Insert the batter y pack into the back of the print er as in the gure shown belo w, f ollowing the di - rection of the arrow . 3. T o remove the batt er y back, pull back the ho ...

  • Star Micronics SM-T400i-DB50 - page 12

    - 5 - 2.1.2 Charging the Battery Inser t the batter y pack into the printer t o charge it. Inser t the batter y charger cable int o the printer ’ s power inlet f or charging. Notes about the Batter y Pack u General Battery Characteristics • The battery is a consumable and its per formance ov er time will gradually decr ease. • While not in us ...

  • Star Micronics SM-T400i-DB50 - page 13

    - 6 - < F or U.S.A. and Canada > Lithium-Ionbatteriesarer ecyclable. Y oucanhelppreserveourenvironmentb yre - turning your used rechar geable batteries to the collection and recycling location nearest you . F or more information regar ding recycling of rechargeable batt eries, calltollfree1-800-822-88 ...

  • Star Micronics SM-T400i-DB50 - page 14

    - 7 - 2.2 Bluetooth Settings 2.2.1 connection 1. Pr ess and hold POWER for appro x. 3 seconds, and printer is turned on. Then, it is r eady to pair with another Bluetooth device . 2. If necessar y , enter the following inf or mation into the t erminal that you are using . PIN: 1234 (default) Device name: Star Micronics (default) F or securit y purp ...

  • Star Micronics SM-T400i-DB50 - page 15

    - 8 - 2.2.2 Auto C onnection Function (only for iOS *1 ) When the Bluetooth connection with your iOS devic e (*2 is disconnected, it is r equired to establish a connection by tapping the printer you wan t to use on the Bluetooth setting screen. This Re - Connec - tion Specication is exactly based on the iOS specications, and this specicati ...

  • Star Micronics SM-T400i-DB50 - page 16

    - 9 - 2.3 Loading P aper Refer to chapter 4, “P aper ” (p. 19), t o select roll paper that conforms to the specica tions. 1. T urn on the printer . 2. Put y our nger on the switch for opening the co ver , and then open and raise the printer cov er . 3. Load the roll paper in the orientation sho wn in the gure below , and then pull the ...

  • Star Micronics SM-T400i-DB50 - page 17

    - 10 - CA UTION When the paper is jammed, be sure to open the printer co ver before removing the j ammed paper . Do not under any circumstances try to pull out the jammed paper forcefully while the printer cov er is close d. Doing so may damage par ts of the printer . Caution S ymbol is symbol is placed ne ar the t her mal hea d to ind icate th ...

  • Star Micronics SM-T400i-DB50 - page 18

    - 11 - 2.4 Memor y Switch Settings Change the Memor y switch by f ollowing operations . (Refer to page 13 “Memor y Switch Setting T able”). 1. Pr ess and hold POWER for appro x. 3 seconds, and printer is turned on. 2. T o put the printer into Memory Switch Setting mode, press and hold both the POWER & FEED buttons for 3 sec onds. After the ...

  • Star Micronics SM-T400i-DB50 - page 19

    - 12 - * Example: When you wan t to change the settings of the printer mode as shown belo w , <Before> Bluetooth/9600BPS/8DA T ABIT/NOP ARIT Y/1STOPBIT/DENSIT YL OW/  L OWQUALITY/MARKNOUSE/SENSORL OW/PWDN1minSleep <Af ter > Blueto ...

  • Star Micronics SM-T400i-DB50 - page 20

    - 13 - Memor y Switch Setting T able Print er Mode Setting Display 1 Communication P or t v 1) RS-232C U AR T Mode Bluetooth Bluetooth Mode Bluetooth(iOS) * Bluetooth(iAP) 2 Baud Rate 9600 bps 9600 BPS 19200 bps 19200 BPS 38400 bps 38400 BPS 57600 bps * 57600 BPS 115200 bps 115200 BPS 3 Data Bit 7 Data bit 7 DA T A BIT 8 Data bit * 8 DA T A BIT 4 P ...

  • Star Micronics SM-T400i-DB50 - page 21

    - 14 - v 1) Communica tion mode It is possible to change the communication mode setting between Bluetooth and serial. Please see below for details t o selec t the proper communication mode f or your application. Bluetooth (iOS): The display sho ws [Bluetooth(iAP)]. At the Bluet ooth (iOS) mode, the printer can c ommuni - cate with an iOS device o v ...

  • Star Micronics SM-T400i-DB50 - page 22

    - 15 - 2.5 Belt Clip 2.5.1 Attaching to the Prin ter F ollow the procedure belo w to attach the belt clip to the printer . 1. Make sure that you are attaching the belt clip in the right orientation, then scr ew the screw that comes with the belt clip into the desig nated screw hole t o attach the belt clip to the printer . 2. Use a coin to rmly ...

  • Star Micronics SM-T400i-DB50 - page 23

    - 16 - 3.1.1 Button 1) POWER Button : 1 P ressing and holding the POWER button for 3 seconds or mor e will turn the power on or o . 2 P ressing both the POWER and FEED buttons simultaneously will cause the ERROR lamp to ash 5 times and put the printer into Memory Switch Setting mode. The POWER button can now be used to change Print er MODE st ...

  • Star Micronics SM-T400i-DB50 - page 24

    - 17 - 3.2 Self T est Y oucanuseaselftesttochecktheprinter ’ ssettings. Before y ou star t the self test, make sure that roll paper has been pr operly loaded into the printer . 3.2.1 Self T est Procedur e 1) T urn on the power while holding down FEED . 2) The print er will pr int the current print er status, includin ...

  • Star Micronics SM-T400i-DB50 - page 25

    - 18 - 3.3 Instruc tion for A uto P ower Down(S leep) Mode The printer in the P ower Down(Sleep) Mode will rec over to the P rint Ready M ode when receiving commands or button operations . Howev er , print data received while shifting from the Sleep Mode to the print Ready Mode (for ap - pro x. 1 sec.) is discarded and cannot be print ed. Theref or ...

  • Star Micronics SM-T400i-DB50 - page 26

    - 19 - 4.1.2 Recommended Paper Manufacturer Product Name Mitsubishi Paper Mills Limited P220AG Oji Paper C o., Ltd. PD450 APPLETON Alpha 800-2.4 KANZAKI (Oji Paper USA ) P-350 4.1.3 Printing Range 4. P aper 4.1 Thermal P aper 4.1.1 Paper Specications P aper width : 111.5±0.5mm P aper thickness : 65±5 µm Outer diameter : Ø50 mm or less Inner ...

  • Star Micronics SM-T400i-DB50 - page 27

    - 20 - 4.2.2 Recommended Paper Manufacturer Product Name Black Mark RICOH 150PSMW Back reading 4.2.3 Printing Range 4.2 Thermal Label 4.2.1 Paper Specications P aper width : 112.5±0.5mm P aper thickness : 115±15 µm Outer diameter : Ø50 mm or less Inner diameter : Ø25 mm or more Recording side : Outside of roll 4.2.3 Memor y Switch Settings ...

  • Star Micronics SM-T400i-DB50 - page 28

    - 21 - 5. General Specications Item Specications Printing method Direct line thermal printing Characters per line Maximum 92 cpl Character size Alphanumericcharacters:9X24dots,12X24dots,and9X17dots Japanesecharacters:24X24dots Character types Alphanumeric characters, expanded graphic ch ...

  • Star Micronics SM-T400i-DB50 - page 29

    - 22 - n Dimensions External Dimensions : 150.9 mm ( W ) × 136.6 mm (D) × 63.3 mm (H) <Model without Card Reader> 150.9 mm ( W ) × 143.2 mm (D) × 63.3 mm (H) <Model with Card Reader> W eight : 735 g (Including Battery Pack) Body Color : Gra y and Black <Model without Card Reader> <Model with Card Reader> 150.9 63.3 63.3 ...

  • Star Micronics SM-T400i-DB50 - page 30

    Application of Council Directive(s) 1999/5/EC of 9 Mar. 1999 2011/65/EU of 8 Jun 2011 Standard(s) to which Conformity is Declared RADIO ： EN 300 328 V1.7.1 EMC ： EN 301 489-1 V1.9.2 EN 301 489-17 V2.1.1 EN 55022 : 2010 EN 55024 : 2010 SAFETY ： EN60950-1: 2006 / +A12: 2011 EN 62479: 2010 ENVIRONMEN T ： EN 50581: 2012 Manufacturer’s Name St ...

  • Star Micronics SM-T400i-DB50 - page 31

    URL : http://www .starmicro nics.com/sup port/ Rev . 1.1 ...

Manufacturer Star Micronics Category Printer

Documents that we receive from a manufacturer of a Star Micronics SM-T400i-DB50 can be divided into several groups. They are, among others:
- Star Micronics technical drawings
- SM-T400i-DB50 manuals
- Star Micronics product data sheets
- information booklets
- or energy labels Star Micronics SM-T400i-DB50
All of them are important, but the most important information from the point of view of use of the device are in the user manual Star Micronics SM-T400i-DB50.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Star Micronics SM-T400i-DB50, service manual, brief instructions and user manuals Star Micronics SM-T400i-DB50. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Star Micronics SM-T400i-DB50.

Similar manuals

A complete manual for the device Star Micronics SM-T400i-DB50, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Star Micronics SM-T400i-DB50 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Star Micronics SM-T400i-DB50.

A complete Star Micronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Star Micronics SM-T400i-DB50 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Star Micronics SM-T400i-DB50, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Star Micronics SM-T400i-DB50, that we can find in the current document
3. Tips how to use the basic functions of the device Star Micronics SM-T400i-DB50 - which should help us in our first steps of using Star Micronics SM-T400i-DB50
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Star Micronics SM-T400i-DB50
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Star Micronics SM-T400i-DB50 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Star Micronics SM-T400i-DB50?

Use the form below

If you did not solve your problem by using a manual Star Micronics SM-T400i-DB50, ask a question using the form below. If a user had a similar problem with Star Micronics SM-T400i-DB50 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)