Manual Smeg SR804EBS3

23 pages Not applicable
Download

Go to site of 23

Summary
  • Smeg SR804EBS3 - page 1

    Contents 27 1 INSTRUCTIONS FOR SAF ETY AND USE __________________________ 28 2 SAFETY PRECAU TIONS _______________________________________ 30 3 ENVIRONMENTAL R ESPONSIBIL ITY _____________________________ 32 4 POSITIONING OF THE HOB ____________________________________ 33 5 ELECTRICAL CONNECTION ____________________________________ 35 6 GAS CONNE C ...

  • Smeg SR804EBS3 - page 2

    General instructions 28 1 INSTRUCTIONS FOR SAFETY AND USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE HOB. WE ADVISE YOU TO REA D THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE HOB. ALSO KEEP THE SERIES OF NOZZLES PROVIDED. ...

  • Smeg SR804EBS3 - page 3

    General instructions 29 SUITABLE HEAT-PROOF GLOVES SHOULD BE WORN FOR ALL OPERATIONS. DO NOT USE STEEL SPONGES OR SHARP SCRAPERS AS THEY WILL DAMAGE THE SURFACE. USE NORMAL NON-ABRASIVE PRODUCTS AND A WOODEN OR PLASTIC TOOL IF NECESSARY. RINSE THOROUGHLY AND DRY USING A SOFT CLOTH OR A MICROFIBRE CLOTH. DO NOT LEAVE THE APPLIANCE UNATTENDED DURING ...

  • Smeg SR804EBS3 - page 4

    General instructions 30 2 SAFETY PRECAUTIONS REFER TO THE INSTALLATION INSTRUCTIONS FOR THE SAFETY REGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILATION FUNCTIONS. IN YOUR INTERESTS AND FOR YOUR SAFETY THE LAW REQUIRES THAT THE INSTALLATION AND SERVICING OF ALL ELECTRICAL APPLIANCES IS CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE ...

  • Smeg SR804EBS3 - page 5

    General instructions 31 IMMEDIATELY AFTER INSTALLATION, CARRY OUT A QUICK TEST ON THE APPLIANCE FOLLOWING THE INSTRUCTIONS PROVIDED LATER IN THIS MANUAL. SHOULD THE APPLIANCE NOT FUNCTION, DISCONNECT IT FROM THE POWER SUPPLY AND CALL THE NEAREST TECHNICAL ASSISTANCE CENTRE. NEVER ATTEMPT TO REPAIR THE APPLIANCE. DURING USE THE APPLIANCE BECOMES VER ...

  • Smeg SR804EBS3 - page 6

    Instructions for disposal 32 3 ENVIRONMENTAL RESPONSIBILITY Our product's packing is made of non-polluting materials , which are therefore compatible with the envir onment and recyclable. Please help by disposing of the packaging correctly. Yo u can obtain the addresses of collection, recycling and disposal centres from yo ur retailer or from ...

  • Smeg SR804EBS3 - page 7

    Instructions for the installer 33 4 POSITIONING OF THE HOB The following operation requir es building and/or carpe ntry work so must be carried out by a competent tradesman. Installation can be carried out on various materials s uch as masonry, metal, solid wood or plastic lamin at ed wood as long as they are heat resistant (T 90°C). 4.1 Attachmen ...

  • Smeg SR804EBS3 - page 8

    Instructions for the installer 34 B B B A+B B B Fig.1 2 0÷4 0 B A Fig.2 B A Fig.3 Fig.4 Fig.5 ...

  • Smeg SR804EBS3 - page 9

    Instructions for the installer 35 5 ELECTRICAL CONNECTION Make sure that the voltage and capacity of the power line conform to the data shown on the plate located u nder the casing. Do not remove this plate for any reason. The plug on the end of the supply c able and the wall soc ket must be the same type and conform to the current electrical syste ...

  • Smeg SR804EBS3 - page 10

    Instructions for the installer 36 6 GAS CONNECTION Connection to the gas mains may be made with a rigid copper pipe or with a flexible pipe and conforming to the provisions defined by standard regulations in force. To facilitate connection, fitting A on the r ear of the appliance m ay be adjusted laterally. For this purpose, loosen hexagon nut B , ...

  • Smeg SR804EBS3 - page 11

    Instructions for the installer 37 6.1 Connection to LPG Use a pressure regulator and make the connection to the tank according to the provisio ns of standards regu lations in force. Make s ure that feed pressure conforms to t he levels shown in t he table in paragraph “ 0 Regulation for LPG”. 6.2 Ventilation of rooms The hob may be installed o ...

  • Smeg SR804EBS3 - page 12

    Instructions for the installer 38 7 ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cl eaning or maintenanc e work, disconnect the appliance from the electrical socket. The hob has been inspected for G20 (2H) natur al ga s at a pressure of 20 mbar. For functioning with other ty pes of gas the nozzles must be replaced and the primary air ...

  • Smeg SR804EBS3 - page 13

    Instructions for the installer 39 7.3 Regulation for LPG Check that the connecti on has been made as described in the “Gas connection” section. Undo the screw “ D ” and push the air re gulator “ C ” fully down. Use a spanner to remove the nozzles “ B ” and fit those of suitable type following the instructions give n in the tables fo ...

  • Smeg SR804EBS3 - page 14

    Instructions for the installer 40 7.4 Regulation for natural gas The hob has been inspected for G20 (2H) natural gas at a pressure of 20 mbar. To allow the unit to work with this type of gas, perform the same operations described i n paragraph “ 0 Regulation for LPG”, but choose the nozzles and reg ulate the primary air for n atural gas, as sho ...

  • Smeg SR804EBS3 - page 15

    Instructions for the installer 41 7.5 Regulation of primary air Referred to distance “ A ” in mm. 60 cm hobs with separable control panel. Burner G20 20 mbar G30/G31 28/37 mbar Auxiliary (1) 3.0 4.0 Semirapid r (2) 1.0 2.0 Semirapid l (3) 1.0 2.0 Rapid large (4) 1.0 3.5 Ultrarapid (5) 1.0 5.0 90 cm hobs with separable control panel. Burner G20 ...

  • Smeg SR804EBS3 - page 16

    Instructions for the installer 42 8 FINAL OPERATIONS Having carried out the above adj ustm ents, reassemble the applianc e following, backwards, the i nstructions in paragra ph “7.1 Removing the separable control pa nel / 7.2 Removing the hob”. 8.1 Regulation of minimum for natural gas Reposition the components o n the burner and slide the knob ...

  • Smeg SR804EBS3 - page 17

    Instructions for the installer 43 8.3 Arrangement of the burners on the hob (Hob with separable control panel) 60 cm. hob BURNERS 1. Auxiliary 2. Semirapid r 3. Semirapid l 4. Rapid large 5. Ultrarapid 90 cm. hob BURNERS 1. Auxiliary 2. Semirapid 3. Rapid 4. Fish burner 5. Ultrarapid ...

  • Smeg SR804EBS3 - page 18

    Instructions for the installer 44 8.4 Arrangement of the burners on the hob (Hob with built-in control panel). 60 cm. hob BURNERS 1. Auxiliary 2. Semirapid r 3. Semirapid l 4. Rapid 5. Ultrarapid 8.5 Lubrication of gas taps With time it may happen that the gas taps get blocked and h ard to turn. Clean them inside an d re-grease them. This operation ...

  • Smeg SR804EBS3 - page 19

    Instructions for the user 45 9 USING THE HOB Before turning on the burners, make sure that the burner rings, caps and grids have been fitted cor rectly. In the ultrarapid burner, notch A must be aligned with pin B . Grid C provided is intended for use with wok s (Chinese pans). Adapter D comes only with open grids models and is intended for use wit ...

  • Smeg SR804EBS3 - page 20

    Instructions for the user 46 while cooking, all p ans or griddles must be positio ned within the cooking hob perimeter an d must be a minimum distance of 3-4 cm from the knobs. 9.3 Diameter of the pans Burners Ø min. and max. (en cm.) Auxiliary 12-14 Semirapid 16-20 Rapid medio 22-26 Rapid large 22-2 6 Ultrarapid 22-26 Fish burner Special oval-sha ...

  • Smeg SR804EBS3 - page 21

    Instructions for the user 47 or fish. 5 Strong For roasts, steaks and large boiled joints. 6 Very strong To boil large amounts of w ater, to fry. WARNING When switching on the electric element for the first time, or if the electric element has not been used for a long time, to rem ove any humidity from the insulating material it should be drie d ou ...

  • Smeg SR804EBS3 - page 22

    Instructions for the user 48 10 CLEANING AND MAINTENANCE Never use a steam jet to clean the appliance. Before any intervention, disconnect the power supply of the device. 10.1 Cleaning Clean the cooking top regularl y every time you use it, obviously after it has cooled. 10.1.1 Regular daily cleaning of the hob In order to clean and preserve t he s ...

  • Smeg SR804EBS3 - page 23

    Instructions for the user 49 10.2 Cleaning of cooking hob components CAUTION: do not wash these components in a dishwasher. In normal use of the hob, the stai nless steel b urner caps and pan- stands tend to be burnishe d by the high temperature. Clea n these parts using very fine abrasive sponges or simil ar commercial products. Then use a specifi ...

Manufacturer Smeg Category Stove

Documents that we receive from a manufacturer of a Smeg SR804EBS3 can be divided into several groups. They are, among others:
- Smeg technical drawings
- SR804EBS3 manuals
- Smeg product data sheets
- information booklets
- or energy labels Smeg SR804EBS3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Smeg SR804EBS3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Smeg SR804EBS3, service manual, brief instructions and user manuals Smeg SR804EBS3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Smeg SR804EBS3.

Similar manuals

A complete manual for the device Smeg SR804EBS3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Smeg SR804EBS3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Smeg SR804EBS3.

A complete Smeg manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Smeg SR804EBS3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Smeg SR804EBS3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Smeg SR804EBS3, that we can find in the current document
3. Tips how to use the basic functions of the device Smeg SR804EBS3 - which should help us in our first steps of using Smeg SR804EBS3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Smeg SR804EBS3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Smeg SR804EBS3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Smeg SR804EBS3?

Use the form below

If you did not solve your problem by using a manual Smeg SR804EBS3, ask a question using the form below. If a user had a similar problem with Smeg SR804EBS3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)