-
Dolby Laboratories SDV-27 - page 1
PORTABLE DVD PLAYER SDV-27 Operating Instructions ...
-
Dolby Laboratories SDV-27 - page 2
2 Important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this appliance near water. 6. Clean only with a soft, dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any ...
-
Dolby Laboratories SDV-27 - page 3
3 Precautions Thank you for purchasing this port able DVD player. Please read this m anual carefully before operating it, and keep it safe for future reference. It will be helpful if you encounter any operational problem. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DRIPPING OR SPLASHING A ...
-
Dolby Laboratories SDV-27 - page 4
4 Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Caution: Use of controls or adjustments or carrying out pr ocedures other than those specified may result in hazardous radiation exposure. CAUTION! RISK OF ELECTRIC SHOCK. DO NOT OPEN To reduce the risk of electric shock, do not remove cover o ...
-
Dolby Laboratories SDV-27 - page 5
5 MACROVISION: This product incorporates copyright prot ection technology that is prot ected by U.S. patents and other intellectual property rights. Use of t his copyright protection technology must be authorised by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision. Reverse engineer ...
-
Dolby Laboratories SDV-27 - page 6
6 Contents Important safe ty ins tructions ..................................................................................................................... 2 Precauti ons .................................................................................................................................................. 3 Contents ................ ...
-
Dolby Laboratories SDV-27 - page 7
7 Connecting to a TV ............................................................................................................. ..................................... 25 Connecting to a Dolby Digital / DTS / MPEG de coder or an amplifier with built-i n decoder ...................................... 2 6 Connecting to a digital amplifier that is no ...
-
Dolby Laboratories SDV-27 - page 8
8 Subtitle l anguage ..................................................................................................................................................... 46 Menu l anguage ........................................................................................................................................................ 46 Audio ...
-
Dolby Laboratories SDV-27 - page 9
9 Precautions when using this Player Do not move the player during playback During playback, the disc spins at high speed, so do not lift or move the player, as doing so may damage the disc. Transporting the player When transporting the player be sure to remove the disc and turn off the power, then unplug the power cord. Place of installation Selec ...
-
Dolby Laboratories SDV-27 - page 10
10 When using with car power cable in cars Turn on the engine and then connect with the car power cable. Cleaning the player Clean the player using a soft, dry cl oth. For stubborn dirt, apply some neut ral deter gent diluted in 5 to 6 parts water to a soft cloth, wring out thoroughly, wipe off the dirt, then wipe the player with a dry cloth. Note ...
-
Dolby Laboratories SDV-27 - page 11
11 Precautions for battery pack operation Operation of the battery pack Charge the battery pack fully before using it for the first time. When the ambient temperature is too high, the batt ery pack may be unusable due to activation of protection circuitry. When the portable DVD player is powered from the battery pack and if the player h ...
-
Dolby Laboratories SDV-27 - page 12
12 Types of discs playable on this Player The discs listed on the table below can be played on this player without an adapter. The marks shown on the table below are indicated on the disc's label, package or jacket. . Types of playable discs and their marks Diameter/Playable sides Playback time DVD Video 12cm / single-sided 12cm / doub ...
-
Dolby Laboratories SDV-27 - page 13
13 Disc structure CDs are divided into units called tracks. Generally one track cor responds to one song. Tracks ar e sometimes further divided into indexes. CDs Track 1 Track 2 Track 3 Track 4 Track 5 DVDs are divided into units called titles, which ar e subdivided into chapters. They also include menu screens that do not belong to any title. With ...
-
Dolby Laboratories SDV-27 - page 14
14 Using these operating instructions Be sure to read the operating instructions carefully before usi ng the player. You can then take maximum advantage of all functions of this player. When this player is connected to a TV or AV amplif ier, the setup screen should be displayed. Choose the various corresponding settings according to the equipment c ...
-
Dolby Laboratories SDV-27 - page 15
15 Checking the accessories Checking the accessories After unpacking, check that all the accessories listed below are included. AC / DC adapter AV cable Ear phone Car power cable Card-type remote control unit Operating instruct ions (this manual) Soft carrying bag Accessories bag Battery pack Short car bag ...
-
Dolby Laboratories SDV-27 - page 16
16 Remote control unit and ma in unit preparations Notes on using the remot e control unit Do not drop or step on the remote control unit or subject it to shocks, as this may damage it. Note that the remote control unit may not work if there are obstacles between it and the remote sensor. Do not expose the remote sensor to strong light. ...
-
Dolby Laboratories SDV-27 - page 17
17 Remote control uni t operating range The remote control unit can operate within a distance of approximately 5 metr es. Note: Most of the player's operations c an be actuated wit h the remote control unit. Some operations, however, can only be done by using the main unit buttons. ...
-
Dolby Laboratories SDV-27 - page 18
18 Parts and functions Liquid crystal display The portable DVD player is equipped with a liquid crystal display. 1 Liquid crystal display 2 Speakers 3 Control section 4 Remote sensor Signals from the remote control unit are received here. 5 Power indicator Off: No power connection. Red: The player is set to standby mode. Blue: The player is on. Tur ...
-
Dolby Laboratories SDV-27 - page 19
19 Main unit control section 1 Play / pause button Press to play. When pressing dur ing playback mode, pause mode is set. Press again to resume playback. Keep it pressed for about 1.5 seconds to power on the unit. 2 Stop / off button Press to stop playback. Keep it pressed for about 1.5 seconds to turn off the unit (standby mode). 3 Previous / next ...
-
Dolby Laboratories SDV-27 - page 20
20 Main unit left side 1 Phone jack For connecting stereo headphone or an amplifier. 2 Volume co ntrol Use to adjust the volume of the speakers or headphone. 3 Video in/out jack Input or output video signals to/from device conne ct ed by setting AV IN/OUT mode value. The AV cable supplied is connected here. 4 Audio in / out and optical output jack ...
-
Dolby Laboratories SDV-27 - page 21
21 Main unit rear side 1 Open-stick 2 Support You can use it to open the tray. The unit can stand with this device. How to stand 1. Pull out the support. 2. Draw out the support to a proper position. 3. Pull down the button to lock it. Main unit bottom side 1 Hole for battery pack 2 Nut for battery p ack 3 Battery connector Note: Remember to replac ...
-
Dolby Laboratories SDV-27 - page 22
22 Remote control unit (frequentl y used buttons) 1 STANDBY button Press this button to turn the power on or off. 2 PREVIOUS / NEXT button ( and ) Use these buttons to search for the beginning of tracks or chapters. Backwards Forwards 3 Scan buttons ( and ) Use these buttons to switch playing speed forwards or backwards. ...
-
Dolby Laboratories SDV-27 - page 23
23 Remote control unit (other butt ons) 5 RETURN button Press to return to the previous item. (Only for VCD, PBC on) 6 ZOOM Zoom the picture on screen. 7 Number butt ons Press these buttons to input numbers. Press the SHIFT button to switch from function to number if necessary. 8 REPEAT button For DVDs, use this button to play titles or chapters re ...
-
Dolby Laboratories SDV-27 - page 24
24 Names of battery parts and their functions 1 DC IN connector Connect the power adapter to recharge. 2 Battery knob Twist to lock / unlock the battery pack. 3 Battery indicator LED. When the battery is discharging, LED is off. When recharging the battery, LED is red. When the LED is green, recharge is finished. 4 Player terminals Supply power to ...
-
Dolby Laboratories SDV-27 - page 25
25 Connecting the Player to other devices Before connecting Turn off the power to the player and the devices to be connected. Connecting to a TV Video-/Audio cabl e (included) To video input jack (yellow) To audio input jack (white) To audio input jack (red) Signal flow ...
-
Dolby Laboratories SDV-27 - page 26
26 Connecting to a Dolby Digi tal / DTS / MPEG decoder or an a mplifier with built- in decoder With this player, you can enjoy pow erful Dolby Digital, DTS or MPEG sound. Output the digital signals from the player's digital output to a decoder or amplifier with built-in decoder. Main unit left panel See picture: Connecting to a TV Hint: For a ...
-
Dolby Laboratories SDV-27 - page 27
27 Connecting to a digi tal amplifier that is not Dolby Digital / DTS / MPEG compatible Output the digital signals from the player's digital output to a digital amplifier t hat is not Dolby / DTS / MPEG compatible. Main unit left panel See picture: Connecting to a TV Optical digital cable (not included) To digital audio input jack Notes: Caref ...
-
Dolby Laboratories SDV-27 - page 28
28 Connecting to active speaker systems Main unit left panel Video-/Audio cabl e (included) To audio input jacks To video input jack Active speaker system ...
-
Dolby Laboratories SDV-27 - page 29
29 Connecting earphone Connect the earphone plug securely to the PHONE JACK on the player. To listen to music through the earphone, first use the VOLUME CONTROL on the left side of the main unit to lower the volume to minimum level, then adjust the volume to comfortable le vel. Be careful not to set the volume to too high a level when using the ear ...
-
Dolby Laboratories SDV-27 - page 30
30 Using the battery Recharging the battery pack 1 Connect the output plug of AC / DC adapter to the battery pack. 2 Connect the AC / DC adapter to the power outlet. When recharging starts, the recharge LED lights red. The recharge LED turns off when recharging is complete. Remove the power cord from the battery pac k. Recharging usuall ...
-
Dolby Laboratories SDV-27 - page 31
31 Notes for recharging When the battery pack is hot, it may take longer t han usual t o recharge or it may sometimes not be possible to recharge it. Wait for the battery pa ck to cool down before tr ying again to recharge. If the recharge LED does not light, check whether the AC adapter and batt ery pack are properly connected. To prot ...
-
Dolby Laboratories SDV-27 - page 32
32 If the power is switched on while the battery pack is not fully charged, the player operation ma y become unstable. Be sure to charge the battery pack fully before using. The battery pack is being recharged slowly while the player is playing with the AC adapter connected. The battery pack is being recharged separately while the playe ...
-
Dolby Laboratories SDV-27 - page 33
33 Turning on the power 1 Connect the AC adapter to a power socket. 2 Connect the DC output plug of the adapter to the DC input jack on the main unit. Main unit (front panel) 3 Hold the ON button on the main unit depressed for about 1.5 seconds. Remote control unit The power LED lights blue. The player can now be used. In standby mode (when ...
-
Dolby Laboratories SDV-27 - page 34
34 Playback functions Loading 1 Press OPEN button to open. (If no disk is in place, the tray will open automatically after power on.) 2 Without a power supply, the tray will not open automatically; you must insert the open-stick into the hole to open it. 3 Position disc and press dow n the disc with your fingers near the centre hole. A click is hea ...
-
Dolby Laboratories SDV-27 - page 35
35 Playing 1 Load the disc One of the following messages appears on the screen: DVD, VCD, CD. For some discs, playback start s automatically when the tray is closed. For a disc which has been programmed and stored in memory, playback starts automatically in the programmed order. Number buttons Shift Next 2 Press the play / pause button ...
-
Dolby Laboratories SDV-27 - page 36
36 If a menu screen appears For DVDs with menu screen or video CDs with playback control (PBC), a menu screen appears. DVD Use the cursor buttons ( / / / ) to select the item, t hen press the ENTER button. To use the number buttons on the remote control unit to select the it em, first press the SHIFT button until NUMBER is displayed ...
-
Dolby Laboratories SDV-27 - page 37
37 Returning to the previous chapter or track (DVDs, video CDs and CDs) Press the previous bu tton during playback. After pressing the previous button, playback returns t o the beginning of the previous chapter or track. Moving to the next chapter or track (DVDS, video CDs and CDs) Press the next button during playback. After pressing the next butt ...
-
Dolby Laboratories SDV-27 - page 38
38 Turning off the power 1 When the power is on, press OFF and hold it for about 1.5 seconds. The power LED shows red and the standby mode is set. The power can also be turned off by pressing the STANDBY button on the remote control unit. 2 Unplug the power cord from the power socket. 3 Disconnect the AC adapter from the player's DC input jack ...
-
Dolby Laboratories SDV-27 - page 39
39 Advanced functions Searching for a specific scene 1 Press the SEARCH button. 2 Press the number button to input specific time or title / chapter. 3 Press the PLAY button or ENTER button. Playback starts from the specified position. Viewing in slow motion (DVDs and video CDs) Press the SLOW button during playback, the playback speed change s to 1 ...
-
Dolby Laboratories SDV-27 - page 40
40 Changing from AV OU T to AV IN You can change the player from AV OUT (output AV si gnal to TV, etc) to AV I N (input AV signal from other device) and use it as a TFT Monitor. Default sett ing is AV OUT. 1 Press MODE button on main unit and switch LCD mode to AV IN/OUT. 2 Press + or - button to switch between AV OUT and AV IN. AV signals input fr ...
-
Dolby Laboratories SDV-27 - page 41
41 Setting up the Player General steps of setup 1 Press the SETUP button on the remote control, the main setup menu appears. 2 Press the LEFT and RIGHT buttons to highlight the icon of the desired page, then press the DOWN or UP button to activate that page. 3 Press the DOWN button to highlight the desired option. Pre ss ENTER or press Right to sel ...
-
Dolby Laboratories SDV-27 - page 42
42 System setup The system setup options ar e illustrated below: TV system If you want to connect the player t o a TV, please choose a valid TV system first. AUTO: Choose this setting if your DVD player is connect ed to a multi-system TV. NTSC: Choose this setting if your DVD player is connected to an NTSC TV. PAL: Choose this setting if your DVD p ...
-
Dolby Laboratories SDV-27 - page 43
43 TV type 16 : 9 (Wide Screen): Choose this setting if your DVD player is connected to a wide screen TV. If you choose this setting and do not have a wide screen TV , the images on the screen may appear dist orted due to vertical compression. 4 : 3 LB (Letter Box): Choose this setting if your DVD player is connected to a normal ratio TV. You will ...
-
Dolby Laboratories SDV-27 - page 44
44 Password 1 The player is locked with a def ault password “0000” and you cannot change the film rat ing. In order to change the rating, choose the password opt ion and input the correct password to unlock the player. 2 After the player is unlocked, you can choose the rating option and change it, t hen you can choose the password option and ch ...
-
Dolby Laboratories SDV-27 - page 45
45 Default Choose this option to resume factory settings. Language setup The language setup options are illustrated below: OSD language Highlight OSD LANGUAGE option, and press LEFT / RIGHT / UP / DOWN to choose the OSD language you prefer. Press ENTER to confirm, then the OSD will be shown in that language. There are 5 optional OSD languages: Engl ...
-
Dolby Laboratories SDV-27 - page 46
46 Subtitle language Highlight the SUBTITLE LANG option, and press LEFT / RIGHT / UP / DOWN to choose the subtitle language you prefer. Press ENTER to confirm. If the disc you are playi ng has that language available, it will display subtitles in that language. There are 7 opti onal subtitle languages: Chinese, English, Japanese, French, Spanish, P ...
-
Dolby Laboratories SDV-27 - page 47
47 Audio setup Audio out Highlight the AUDIO OUT option, and press LEFT / RIGHT / UP / DOWN to choose the audio output mode you prefer. Press ENTER to confirm: There are 3 optional audio output modes: SPDI F/OFF, SPDIF / RAW and SPDIF/ PCM. SPDIF / OFF: Choose this setting to output an analog signal, and no signal output from the optical jack. SPDI ...
-
Dolby Laboratories SDV-27 - page 48
48 V ideo setup The video setup options are illustrated below: Brightness Use the UP and DOWN buttons to move the scroll and adjust the brightness. Contrast Use the UP and DOWN buttons to move the scroll and adjust the contrast. ...
-
Dolby Laboratories SDV-27 - page 49
49 Hue Use the UP and DOWN buttons to move the scroll and adjust the hue. Saturation Use the UP and DOWN buttons to move the scroll and adjust the saturation. ...
-
Dolby Laboratories SDV-27 - page 50
50 Digit al setup The digital setup options are illustrated below: Digital setup DYNAMIC RANGE: Choose this setting to adjust the li ne out compression ratio and get a different effect. If adjusting to FULL, the audio signal peak value will be compressed mi nimum, when adjusted to OFF, maximum. ...
-
Dolby Laboratories SDV-27 - page 51
51 Precautions during use Handling discs When holding with both hands When holding with one hand Do not use damaged, cracked or warped discs. Do not scratch the signal surface or let it get dirty. Do not attach paper or seals to discs. The player may be damaged if there is any exposed glue, etc., on discs. Extra labels are often att ...
-
Dolby Laboratories SDV-27 - page 52
52 Irregular shaped discs Irregular shaped discs (heart -shaped discs, hexagonal discs, etc. ) cannot be played on this player. Doi ng so could damage the player. Never use such discs. T rouble shooting Picture is disturbed when playing a DVD recorded by a VCR This player incorporates copyright protection te chnology. Some discs include signa ls pr ...
-
Dolby Laboratories SDV-27 - page 53
53 Bad playback quality The player is set to AV OUT but there are other AV signals input from the AV jack. Player gets hot This is normal. Notes: The player may stop operating properly due to static electricity or other external causes. I n this case, the problem is usually solved by unplugging the power cord and then plugging it in again. If this ...
Do you have a question concerning Dolby Laboratories SDV-27?
Use the form below
If you did not solve your problem by using a manual Dolby Laboratories SDV-27, ask a question using the form below. If a user had a similar problem with Dolby Laboratories SDV-27 it is likely that he will want to share the way to solve it.