English dropdown-ico

Manual Star Micronics TCP2000 Series

13 pages 0.12 mb
Download

Go to site of 13

Summary
  • Star Micronics TCP2000 Series - page 1

    THERMAL REWRITE CARD READER / WRITER TCP100/2000 series Installation Guide & Specifications Thank you for choosing the TCP100/2000 Thermal rewrite card system. This “Installation Guide & Specifications” includes very important instructions for safety . Please read this manual before you start the system, and follow the instructions. Sta ...

  • Star Micronics TCP2000 Series - page 2

    C • O • N • T • E • N • T • S 1. HANDLING NOTES --------------------------------------------------------- 1 2. OUTLINE ---------------------------------------------------------------------- 4 3. UNP ACKING ------------------------------------------------------------------ 5 4. APPEARANCE AND NOMENCLA TURE ----------------------------- ...

  • Star Micronics TCP2000 Series - page 3

    1 HANDLING NOTES At the installation: 1) Install the TCP100/2000 reader/writer on a flat surface. Minimize any shock or vibration to the reader/writer , as shock or vibration may cause injury and/or failure. 2) Keep the TCP100/2000 reader/writer away from hands of the children. 3) Do not use or leave the TCP100/2000 reader/writer in direct sunshine ...

  • Star Micronics TCP2000 Series - page 4

    2 During the operation: 1) Do not use any other card but specified by Star Micronics Co., Ltd. It may cause malfunction, failure, etc. 2) Do not use wet or oily stained card. Do not touch card with wet or stained hand. It may cause malfunction, failure, etc. If the card gets stained, please perform cleaning of the card and the unit. (For the clean- ...

  • Star Micronics TCP2000 Series - page 5

    3 10) When the unusual (such as noise, stench, smoke, fire, etc.) is found, turn off the power immediately . Then disconnect the plug. If the TCP100/ 2000 reader/writer being kept using, it may cause failure, skin burn, etc. Contact our sales/tech support team for repair . 1 1) Connect and disconnect the power cable only with power turned off and w ...

  • Star Micronics TCP2000 Series - page 6

    4 OUTLINE The TCP100/2000 series is a reading/writing device for specified IC card or reading device for ISO magnetic stripe type card. It also has print/erase capability to human readable area on the surface of the card. This series is compatible with most host computers and various P .O.S. systems. (TCP2000 series does not support for IC card.) T ...

  • Star Micronics TCP2000 Series - page 7

    5 2 5 4 3 1 UNP ACKING After unpacking the unit, check that all the accessories are included in the individual box. Housed unit (TCP100/2000 series) 1 TCP100/2000 unit 2 Power cable 3 Cleaning cards (2 pcs) 4 Cleaning liquid 5 Installation Guide & Specifications (this manual) 3 ...

  • Star Micronics TCP2000 Series - page 8

    6 0 6 1 5 4 8 3 7 2 0 A 8 7 9 APPEARANCE AND NOMENCLA TURE Housed unit TCP100/2000 series [TCP100] [TCP2000 back] 1 Switch Cover This cover protects the power switch of the system. Push to open and close. 2 Power Switch This switch turns the power of the system ON/OFF . 3 POWER LED This LED indicates that the power of the system is on. 4 READY LED ...

  • Star Micronics TCP2000 Series - page 9

    7 CONNECTION TO EXTERNAL UNITS AND SETTING (Housed unit TCP100/2000 series) <Connecting the interface cable> 1 T urn OFF the power of the host computer and the reader/writer . 2 Plug in an end of the interface cable to the reader/writer connector and the other end to the serial port of the host computer . 3 Fasten two screws located at both t ...

  • Star Micronics TCP2000 Series - page 10

    8 Cleaning switch Front cover CLEANING 6-1 Using the cleaning card T wo cleaning car ds and one bottle of cleaning liquid for cleaning the mag- netic head, rollers, etc. are supplied in the enclosed plastic bag. (1) Dimensions of cleaning card (2) Frequency of cleaning 1. Daily or every 300 times of printing. 2. When read/write errors occur continu ...

  • Star Micronics TCP2000 Series - page 11

    9 TROUBLE SHOOTING Difficulties when the power is turned ON. Symptom Possible cause Remedy Power LED lamp does notlight up. Power LED lamp light up. Card is not accepted Card is accepted Card is not accepted Card is accepted, but main unit does no t properly run. Power cable is not properly plugged in. Power cable is broken. Power fuse is blown. LE ...

  • Star Micronics TCP2000 Series - page 12

    10 TCP100 TCP2000 Card type PVC (thick card) PET (thin card) Card feeding part Driving method Feed roller Card inserting Face up in one direction direction Card feed speed 350mm/s (high speed) 350mm/s (high speed) 40mm/s (low speed) 30mm/s (low speed) Magnetic recording part ISO T rack 1,2 : read ISO T rack1, T rack2, T rack 3 : read/write Track 3 ...

  • Star Micronics TCP2000 Series - page 13

    Special Products Operating Div . Card System Sales Section 536 Nanatsushinya, Shimizu, 424-0066, Japan T el: 81-543-47-0122 , Fax: 81-543-48-5013 http://www .star-micronics .co .jp 2000.07 59082055 ...

Manufacturer Star Micronics Category Network Card

Documents that we receive from a manufacturer of a Star Micronics TCP2000 Series can be divided into several groups. They are, among others:
- Star Micronics technical drawings
- TCP2000 Series manuals
- Star Micronics product data sheets
- information booklets
- or energy labels Star Micronics TCP2000 Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Star Micronics TCP2000 Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Star Micronics TCP2000 Series, service manual, brief instructions and user manuals Star Micronics TCP2000 Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Star Micronics TCP2000 Series.

Similar manuals

A complete manual for the device Star Micronics TCP2000 Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Star Micronics TCP2000 Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Star Micronics TCP2000 Series.

A complete Star Micronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Star Micronics TCP2000 Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Star Micronics TCP2000 Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Star Micronics TCP2000 Series, that we can find in the current document
3. Tips how to use the basic functions of the device Star Micronics TCP2000 Series - which should help us in our first steps of using Star Micronics TCP2000 Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Star Micronics TCP2000 Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Star Micronics TCP2000 Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Star Micronics TCP2000 Series?

Use the form below

If you did not solve your problem by using a manual Star Micronics TCP2000 Series, ask a question using the form below. If a user had a similar problem with Star Micronics TCP2000 Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)