English dropdown-ico

Manual Mitsubishi Electronics PD-6150

46 pages 1.1 mb
Download

Go to site of 46

Summary
  • Mitsubishi Electronics PD-6150 - page 1

    Mitsubishi Plasma Displa y PD-5050 & PD-6150 Owner’ s Guide ...

  • Mitsubishi Electronics PD-6150 - page 2

    IMPOR T ANT SAFETY INSTRUCTIONS (PD-5050/PD-6150) Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this plasma display near water . 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the man ...

  • Mitsubishi Electronics PD-6150 - page 3

    Impor tant Infor mation Precautions Please read this manual carefully before using your Mitsubishi plasma display and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SER VICEABLE P AR TS INSIDE. REFER SER VICING TO Q U ALIFIED SER VI ...

  • Mitsubishi Electronics PD-6150 - page 4

    NO TE: When you connect a computer to this monitor , use an RGB cable including the ferrite cores on both ends of the cable. If you do not do this, this display will not conform to mandatory FCC standards. Attaching the ferrite cores: Attach the ferrite cores on both ends of the po wer cable (supplied). Close the lid tightly until the clamps click. ...

  • Mitsubishi Electronics PD-6150 - page 5

    The normal use of a TV should include a mixtur e of TV picture types. The most frequentl y used picture types should fill the screen with constantly mo ving images rather than stationary images or patterns. Displaying the same stationary patterns ov er extended periods of time, or displaying the same stationary pattern frequently can leav e a subtl ...

  • Mitsubishi Electronics PD-6150 - page 6

    Cleaning Safeguards Plasma Display Screen & Cabinet Please follo w the cleaning safeguards listed belo w to pre vent damage to your Plasma Display and retain this document for future reference. IMPOR T ANT : No Abrasives! DO NO T use any kind of abr asive cloth or cleaner or ammonia on the Plasma Displa y’ s screen or cabinet. Cleaning Y our ...

  • Mitsubishi Electronics PD-6150 - page 7

    Introduction Introduction to the PD-5050/ PD-6150 Plasma Displays Mitsubishi’ s PD-5050/PD-6150 plasma displays ar e a seamless blend of cutting-edge visual technology and sophisticated design. The displays sleek techno-ar t lines blend in well with most en vironments. The displays crisp, vi vid image quality will transform data from any graphic ...

  • Mitsubishi Electronics PD-6150 - page 8

                   ? ...

  • Mitsubishi Electronics PD-6150 - page 9

    ...

  • Mitsubishi Electronics PD-6150 - page 10

    1 1 50 mm (2") 50 mm (2") 50 mm (2") Wall Wall 50 mm (2") 50 mm (2") Y ou can attach your optional mount or stand to the plasma display in the following way: 1. Bef or e p er fo rm in g wo rk m ak e su re to d is con ne ct t he A C co rd f ro m the p la sm a dis pl ay . 2. Bef or e per for mi ng w o rk s pr ead the pr ote c ...

  • Mitsubishi Electronics PD-6150 - page 11

    2                                ...

  • Mitsubishi Electronics PD-6150 - page 12

    3              A A C IN Connect the included po wer cord here. B EXT SPEAKER L and R Connect speakers (optional) here. Maintain the correct polarity . Connect the (positiv e) speak er wire to the EXT SPEAKER terminal and the (negativ e) speaker wir e to the EXT SPEAKER terminal on both LEFT and ...

  • Mitsubishi Electronics PD-6150 - page 13

    4            � PO WER ON/ST ANDBY Switches the po wer to ON or ST ANDBY mode. (These buttons do not operate when POWER/ ST ANDBY indicator of the main unit is off.)  SLEEP Press this button to acti v ate the of f timer .  INFO Displays the source settings on the screen.  FORMA T Automatically ...

  • Mitsubishi Electronics PD-6150 - page 14

    5 Battery Installation and Replacement Insert the 2  AAA batter ies, making sure insert them with the proper polarity . 1. Remove the remote control s back cov er by gently pressing the rigid tab in the direction of the arrow . 2. Instal l the batteri es accord ing to the (+) and () indica tion inside the case. For ease of installation, ...

  • Mitsubishi Electronics PD-6150 - page 15

    6                 ? ...

  • Mitsubishi Electronics PD-6150 - page 16

    7                              Con ne ct ing y our P C o r M ac int os h comp ut er to yo ur pl as ma di sp lay wi ll en ab le you to di spl a y yo ur co mpu te r s sc re en im ag e fo r an im pr es si v e pr es en tat io n. Th ...

  • Mitsubishi Electronics PD-6150 - page 17

    8 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6                  MonitorLink and MonitorLink Contr ol 1. Connect a HDMI to HDMI cable from the MONLINK OUTPU T of a Mitsubis hi HD-600 0 Recei v er/Con trol ler to the MONLINK in put on the plasma display . A HDM I to HDMI cable and a RS-23 ...

  • Mitsubishi Electronics PD-6150 - page 18

    9             Using the cable clamps pro vided with the plasma display b undle and attach the signal and audio cables to the back panel. Back of the unit mounting hooks/mounting holes T o attach T o detach   cables 1. 2. 9 ...

  • Mitsubishi Electronics PD-6150 - page 19

    10 Basic Operations POWER ON: 1. Plug the po wer cord into an activ e AC po wer outlet. 2. Press the Power b utton located underneath the right side of the front panel. The displays PO WER/ST ANDBY indicator turns green and the plasma display is on. OFF: Press the Pow er button (underneath the front panel) to turn of f the display . The displays PO ...

  • Mitsubishi Electronics PD-6150 - page 20

    11 SLEEP/OFF TIMER T o set the off timer: The off timer can be set to tur n the power of f after 30, 60, 90 or 120 minutes. 1. Press the SLEEP button to start the timer at 30 minutes. 2. Press the SLEEP button to the desired time . 3. The timer starts when the menu turns of f. → 30 → 60 → 90 → 120 → 0 OFF TIMER 30 T o chec k the remaining ...

  • Mitsubishi Electronics PD-6150 - page 21

    12 EXP AND screen size The picture is expanded in the horizontal and v ertical direction, maintaining the original proportions. * Use this for theater size (wide) movies, etc. ZOOM screen size The squeezed film ima ge is expanded to fill the entir e screen at a ratio of 2.35:1. Black bands do not appear at the top and bottom but information is lost ...

  • Mitsubishi Electronics PD-6150 - page 22

    13 Information  Supported resolution See page 34 for details on the display output of the various VESA signal standards supported by the display .  When 852 (848) dot  480 line wide V GA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are in- put Select an appropriate setting for RGB SELECT mode refe ...

  • Mitsubishi Electronics PD-6150 - page 23

    14 Menu Operations The follo wing describes how to use the menus and the selected items. 1. Press the MENU/ENTER b utton on the remote control to display the MAIN MENU. SEL. MENU/ENTER OK EXIT EXIT MAIN MENU PICTURE A UDIO IMA GE ADJ. SET UP FUNCTION SIGNAL INFO. 2. Press the ADJUST b uttons ▲ ▼  and  on the remote control to highlight th ...

  • Mitsubishi Electronics PD-6150 - page 24

    15                                ? ...

  • Mitsubishi Electronics PD-6150 - page 25

    16 *1 Only when A UTO PICTURE is OFF . *2 RGB/PC only Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET P AGE # REFERENCE FUNCTION POWER MGT . ON ←→ OFF YES 26 INPUT SKIP ON ←→ OFF YES 26 LONGLIFE MANUAL/AUTO YES 26 PEAK BRIGHT 100%/75%/50%/25% YES 27 ORBITER AUTO1/AUTO2/OFF YES 27 INVERSE/WHITE OFF/INVERSE/WHITE YES 27 SOFT FOCUS O ...

  • Mitsubishi Electronics PD-6150 - page 26

    17 Picture Settings Menu Storing picture settings This function allows you to store in memory the current input signal and PICTURE menu settings and to recall these settings when necessary . There are six picture memory locations av ailable, and notes of up to 15 characters can be added to each. Example: Storing picture settings at MEMOR Y1 Press M ...

  • Mitsubishi Electronics PD-6150 - page 27

    18 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes which hav e poor picture quality . Example: Setting “NR-3” Press MENU/ENTER button to access MAIN MENU. Use the   ▲ ▼ b uttons to select the PICTURE menu and then press the MENU/ENTER button. Use the ▲ ▼ b ...

  • Mitsubishi Electronics PD-6150 - page 28

    19 Setting the color temperature Use this procedure to set color tone produced by the plasma display . Example: Setting “HIGH” Press MENU/ENTER button to access MAIN MENU. Use the   ▲ ▼ b uttons to select the PICTURE menu and then press the MENU/ENTER button. Use the ▲ ▼ buttons to select the COLOR TEMP setting. Use the   b ...

  • Mitsubishi Electronics PD-6150 - page 29

    20 ColorView™ Use this procedure to adjust hue and color density for red, green, blue, yello w , magenta and cyan. Y ou can accentuate the green color of trees, the blue of the sky , etc. Example: Using COLOR VIEW Press MENU/ENTER button to access MAIN MENU. Use the   ▲ ▼ b uttons to select the PICTURE menu and then press the MENU/ENTER ...

  • Mitsubishi Electronics PD-6150 - page 30

    21 Audio Settings Menu Adjusting the treble, bass and left/right balance and audio input select The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass Press MENU/ENTER button to access MAIN MENU. Use the   ▲ ▼ buttons to select the A UDIO menu and then press the MENU/ENTER button. Use the ...

  • Mitsubishi Electronics PD-6150 - page 31

    22 SET UP Settings Menu Setting the language for the men us The menu display can be set to one of eight languages. Example: Setting the men u display to “DEUTSCH” Press MENU/ENTER button to access the MAIN MENU. Use the   ▲ ▼ b uttons to select the SET UP menu and then press the MENU/ENTER button. Use the ▲ ▼ buttons to select the ...

  • Mitsubishi Electronics PD-6150 - page 32

    23   RGB SELECT modes One of these 7 modes must be selected in order to display the follo wing signals correctly . A UT O: Select the suitable mode for the specif ications of input signals as listed in the table Computer input signals supported by this system on page 7 of Model Information. STILL: T o displ ...

  • Mitsubishi Electronics PD-6150 - page 33

    24 Setting the screen size for S1/S2 video input If the S-video signal contains screen size information, the image will be automatically adjusted to f it the screen when this S1/S2 is set to AUT O. This feature is av ailable only when an S-video signal is input via the INPUT3 terminal. Example: Setting “S1/S2” to “A UT O” Press MENU/ENTER b ...

  • Mitsubishi Electronics PD-6150 - page 34

    25 Resetting to the default values Use these operations to restore all the settings (PICTURE, A UDIO, IMAGE ADJUST , SET UP , etc) to the factory default v alues. Refer to pages 15 & 16 for items to be r eset. Press MENU/ENTER button to access the MAIN MENU. Use the   ▲ ▼ b uttons to select the SET UP menu and then press the MENU/ENTE ...

  • Mitsubishi Electronics PD-6150 - page 35

    26 Function Settings Menu Setting the power mana gement for computer images This energy-sa ving (po wer management) function automatically reduces the displays po wer consumption if no operation is performed for a certain amount of time. Example: T ur ning the pow er management function on Press MENU/ENTER button to access the MAIN MENU. Use the ? ...

  • Mitsubishi Electronics PD-6150 - page 36

    27 PEAK BRIGHT Use this to activ ate the brightness limiter . Example: Setting “PEAK BRIGHT” to “75%” Follo w the instructions gi ven in the “Reducing b urn-in of the screen” section. Bring up the LONGLIFE menu. Use the ▲ ▼ buttons to select PEAK BRIGHT setting. Use the   b uttons to change PEAK BRIGHT setting. SEL. ADJ. EXIT ...

  • Mitsubishi Electronics PD-6150 - page 37

    28 ORBITER MENU Use this to set menu shift. Example: Setting “ORBITER MENU” to “OFF” Follo w the instructions gi ven in the “Reducing Bur n-in of the screen” section. Bring up the LONGLIFE menu. Use the ▲ ▼ buttons to select ORBITER MENU setting. Use the   buttons to turn the ORBITER MENU on or of f. SEL. ADJ. EXIT RETURN LONG ...

  • Mitsubishi Electronics PD-6150 - page 38

    29 Application These specifications co ver the communications control of the plasma monitor by external equipment. Use a crossed (re verse) cable. T ype of connector: D-Sub 9-pin male 1 5 9 6 2 34 7 8 Communication Parameters (1) Communication system Asynchronous (2) Interf ace RS-232C (3) Baud rate 9600 bps (4) Data length 8 bits (5) P arity Odd ( ...

  • Mitsubishi Electronics PD-6150 - page 39

    30 Remedy • Def ault seting for ORBITER is ON (A UTO1). In this mode, picture mo ves intermittently around the screen. See page 27 to turn off ORBITER. • If there are no abnormalities in the image and sound, the noise is caused by the cabinet reacting to changes in humidity . This will not affect perf ormance. • Leav e some space between the ...

  • Mitsubishi Electronics PD-6150 - page 40

    31 *1 Overheat protector If the display becomes too hot, the overheat protector will be acti vated and the display will be turned of f. If this happens, t urn of f the power to the display and unplug the power cord. If the room where the display is installed is particularly hot, mo ve the display to a cooler locatio n and w ait for the display to c ...

  • Mitsubishi Electronics PD-6150 - page 41

    32 PD-5050 Specifications Screen Size 43.5"(H) ⳯ 24.5"(V) inches 1106(H) ⳯ 622(V) mm diagonal 50" Aspect Ratio 16 : 9 Resolution 1365(H) ⳯ 768(V) pixels Pixel Pitch 0.032"(H) ⳯ 0.032"(V) inches 0.81(H) ⳯ 0.81(V) mm Color Processing 4,096 steps, 68.7 billion colors Signals Synchronization Range Horizontal : 15.5 to ...

  • Mitsubishi Electronics PD-6150 - page 42

    33 PD-6150 Specifications Screen Size 53.2"(H) ⳯ 29.9"(V) inches 1351(H) ⳯ 760(V) mm diagonal 61" Aspect Ratio 16 : 9 Resolution 1365(H) ⳯ 768(V) pixels Pixel Pitch 0.039"(H) ⳯ 0.039"(V) inches 0.99(H) ⳯ 0.99(V) mm Color Processing 4,096 steps, 68.7 billion colors Signals Synchronization Range Horizontal : 15.5 to ...

  • Mitsubishi Electronics PD-6150 - page 43

    34         Screen mode               When the screen mode is NARR O W , each signal is conv erted to a 1024 dots � 768 lines signal. (Except for * 2, 3, 4 )  When the screen mode is TR UE, the picture is ...

  • Mitsubishi Electronics PD-6150 - page 44

    35 *1 Only when using a graphic accelerator board that is capable of displaying 852 ⳯ 480. *2 This signal is con v erted to a 1024 dots ⳯ 640 lines signal. *3 The picture is displayed in the original resolution. *4 The aspect ratio is 5:4. This signal is con verted to a 960 dots ⳯ 768 lines signal. *5 Normally the RGB select mode suite for th ...

  • Mitsubishi Electronics PD-6150 - page 45

    36 Mitsubishi Plasma Display Panel Limited W arranty MITSUBISHI DIGIT AL ELECTRONICS AMERICA, INC . (“MDEA”) w arrants to the original purchaser of this Plasma Display P anel that if purchased from an authorized MITSUBISHI A udio/Video Dealer , should it prov e def ective b y reason of improper workmanship and/or material: a. Parts . All parts ...

  • Mitsubishi Electronics PD-6150 - page 46

    Printed in Japan 7S80169 2 Mitsubishi Digital Electronics America 9351 Jeronimo Road Irvine, CA 92618 DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device ma y not cause harmful interference, and (2) this device must accept any interference received, includin ...

Manufacturer Mitsubishi Electronics Category Flat Panel Television

Documents that we receive from a manufacturer of a Mitsubishi Electronics PD-6150 can be divided into several groups. They are, among others:
- Mitsubishi Electronics technical drawings
- PD-6150 manuals
- Mitsubishi Electronics product data sheets
- information booklets
- or energy labels Mitsubishi Electronics PD-6150
All of them are important, but the most important information from the point of view of use of the device are in the user manual Mitsubishi Electronics PD-6150.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Mitsubishi Electronics PD-6150, service manual, brief instructions and user manuals Mitsubishi Electronics PD-6150. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Mitsubishi Electronics PD-6150.

Similar manuals

A complete manual for the device Mitsubishi Electronics PD-6150, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Mitsubishi Electronics PD-6150 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Mitsubishi Electronics PD-6150.

A complete Mitsubishi Electronics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Mitsubishi Electronics PD-6150 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Mitsubishi Electronics PD-6150, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Mitsubishi Electronics PD-6150, that we can find in the current document
3. Tips how to use the basic functions of the device Mitsubishi Electronics PD-6150 - which should help us in our first steps of using Mitsubishi Electronics PD-6150
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Mitsubishi Electronics PD-6150
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Mitsubishi Electronics PD-6150 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Mitsubishi Electronics PD-6150?

Use the form below

If you did not solve your problem by using a manual Mitsubishi Electronics PD-6150, ask a question using the form below. If a user had a similar problem with Mitsubishi Electronics PD-6150 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)