English dropdown-ico

Manual Kawasaki 840108

38 pages 2.09 mb
Download

Go to site of 38

Summary
  • Kawasaki 840108 - page 1

    87-1904-60957 KAW ASAKI™ IS A TRADEMARK LICENSED BY KAW ASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQUIRES SHOULD BE DIRECTED TO: KAW ASAKI™ EST UNE MARQUE DE COMMERCE DE KAWASAKI™ MOTORS CORP ., U.S.A., QUI NE FABRIQUE P AS ET NE DISTRIBUE PAS CE PRODUIT THIS PRODUCT . LES QUESTIONS DES ...

  • Kawasaki 840108 - page 2

    ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 SPECIFICA TIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PROTECTING THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 OTHER CONSUMER DO-IT -YOURSELF (DIY) TOOLS . . . . . . . . . ...

  • Kawasaki 840108 - page 3

    WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury . CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury . CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may r ...

  • Kawasaki 840108 - page 4

    SERVICE T ool service must be performed only by qualified repair personnel. Ser vice or maintenance by unqualified personnel may result in a risk of injury . When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructi ...

  • Kawasaki 840108 - page 5

    FUNCTIONAL DESCRIPTION CONTROLS AND COMPONENTS: 1. Battery Pack 2. Release Buttons on Each Side 3. 120V AC Adapter 4. Charger 5. LED Charging Indicators 6. 10mm (3/8") Keyless Chuck 7. 25 Adjustable T orque Settings Control Ring COMPONENT MODEL NUMBER BA TTERY P ACK 690506 120V AC ADAPTER 690074 CHARGER 690072 10mm (3/8") KEYLESS CHUCK 69 ...

  • Kawasaki 840108 - page 6

    BA TTERY Before using battery pack, please read carefully all instruc- tions and cautionary markings on battery pack, batter y charger and product using battery . Do not incinerate the battery pack even if it is severely dam- aged or is completely worn out. The battery pack can explode. Do not carry batter y packs in aprons, pockets, or tool boxes, ...

  • Kawasaki 840108 - page 7

    CHARGING BA TTERY P ACK CHARGE BA TTERY P ACK: 1. Make sure the trigger on the Cordless Drill is in the “OFF” position and remove the battery pack from the Cordless Drill. 2. Plug 120V AC Adapter into household outlet and into side of battery charger . Insert battery pack into battery charger . When the battery is placed in the charger , the re ...

  • Kawasaki 840108 - page 8

    SCREW DRIVING WHEN DRIVING F ASTENERS: • Always start slowly and gradually increase the speed of the Drill. • Release the trigger when you feel the clutch slip. • Always keep the driver bit straight to prevent damage to the screw . • Hold the Drill with both hands to ensure control if the bit should stick or slip. • T o prevent wood from ...

  • Kawasaki 840108 - page 9

    Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear . Always clean the battery pack using only a dr y cloth. Do not use liquids. Always unplug the charger before cleaning it. Regularly clean the ventilation slots ...

  • Kawasaki 840108 - page 10

    USE WARRANTY . This tool is made for home use in the execution of projects and repairs in and around the home. Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty . The date of purchase shall be the date of shipment to the original pur chaser , or the date the original purchaser took possession, custody or con ...

  • Kawasaki 840108 - page 11

    EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P AR TICULAR PURPOSE. NO WARRANTY , ORAL OR WRITTEN, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT . ALL EXPRESS AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENT A TIONS BY ALL TRADE AND/OR ITS REPRESE ...

  • Kawasaki 840108 - page 12

    18V BATTERY-OPERATED WORKLIGHT INSTRUCTION MANUAL 87-1904-60957 KAW ASAKI™ IS A TRADEMARK LICENSED BY KAW ASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2005 ALL TRADE TOOLS, LLC. 1431 VIA PLA T A LONG BEACH, CA 90810-1462 USA 840108 – 18V Black Cordle ...

  • Kawasaki 840108 - page 13

    CONGRA TULA TIONS! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Service. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for , this tool will give you many years o ...

  • Kawasaki 840108 - page 14

    SAFETY RULES FOR WORKLIGHT Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create risk of fire. Keep the handle of the Worklight dry , clean, and free from oil and grease. Do not run the Worklight while carrying it at your side. The worklight heats up immediately when in use and could result ...

  • Kawasaki 840108 - page 15

    CHARGER Before using battery charger , please read carefully all instructions and cautionary markings on batter y charger , battery pack and product using battery . The charger will not automatically turn “OFF” when the battery pack is fully charged. The charging indicator light will remain “ON” until the charger is disconnected from the el ...

  • Kawasaki 840108 - page 16

    SYMBOL NAME EXPLANA TION ␾ Diameter Size of Drill Bits, Grinding Wheels, etc. No load speed No-load Rotational Speed .../min Revolutions per Minute Revolutions, Surface Speed, Strokes, etc. per Minute 1,2,3, … Ring Selector Settings Speed, T orque or Position Settings OPERA TING INSTRUCTIONS Parts of this Worklight heat up almost immediately wh ...

  • Kawasaki 840108 - page 17

    9 1. Remove the battery pack from the Worklight. 2. Hold the top of the Worklight with one hand while twisting the rim in a counter -clockwise direction with the other . Continue turning until the rim comes loose. 3. Remove the bulb by turning it slightly and pulling it out of the bulb fitting. Be careful not to damage the delicate parts inside the ...

  • Kawasaki 840108 - page 18

    SERVICE Use only authorized replacement parts for your tool. Equipment service must be per formed only by qualified repair personnel using authorized replacement parts. Service or maintenance by unqualified personnel could result in considerable risk of personal injury . Use of unauthorized parts or fail- ure to follow maintenance instructions may ...

  • Kawasaki 840108 - page 19

    item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or replaced unit will be warranted under the terms of the remainder of the warran ...

  • Kawasaki 840108 - page 20

    DAMAGES. IN NO EVENT , WHETHER AS A RESUL T OF A BREACH OF CONTRACT , WARRANTY , TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALL TRADE’S AND/OR ITS REPRESENT A TIVE(S)’ LIABILITY EXCEED THE PRICE OF THE PRODUCT . ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINA TE UPON THE EXPIRA TION OF THE W ARRANTY PERIODS SPECI ...

  • Kawasaki 840108 - page 21

    18V BATTERY-OPERATED RECIPROCATING SAW INSTRUCTION MANUAL COMPONENT #840108 87-1904-60957 KAW ASAKI™ IS A TRADEMARK LICENSED BY KAW ASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQUIRES SHOULD BE DIRECTED TO: ©COPYRIGHT 2005 ALL TRADE TOOLS, LLC. 1431 VIA PLA T A LONG BEACH, CA 90810-1462 USA 8 ...

  • Kawasaki 840108 - page 22

    CONGRA TULA TIONS! Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Service. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for , this tool will give you many years o ...

  • Kawasaki 840108 - page 23

    WORK AREA Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children, and visitors away while operating a power tool ...

  • Kawasaki 840108 - page 24

    SERVICE T ool ser vice must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel may result in a risk of injury . When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructi ...

  • Kawasaki 840108 - page 25

    The battery is not fully charged. Before first use, the batter y pack requires 8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5 hours for the battery to be fully charged. Always switch to a fresh battery when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the fa ...

  • Kawasaki 840108 - page 26

    9 The battery pack and charger heat during charging. Place the charger on a flat, non-flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack. When the battery pack requires recharging, a 3-5 hour charge allows the tool to operate at full power . A ch ...

  • Kawasaki 840108 - page 27

    SYMBOLS IMPORT ANT : Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer . SYMBOL NAME EXPLANA TION V V olts Voltage (Potential) A Amperes Current Hz Hertz Frequency (Cycles per Second) W Watt Power Kg Kilograms ...

  • Kawasaki 840108 - page 28

    A TT ACHING / REMOVING BLADE Failure to remove the battery pack from the saw before removing the blade could result in accidental starting and serious personal injury . • Remove the battery pack. • Use the allen wrench to loosen the blade clamp screw on the side of the saw by turning it counter -clockwise. Do not remove the screw entirely . TO ...

  • Kawasaki 840108 - page 29

    PLUNGE CUTTING Never feed the blade into the work piece until the blade is at full speed. If the blade is not at full speed, the saw may kick back causing serious personal injury . • Mark out the line to be cut so it is easily visible. • Start inside the area to be cut out. • Depress the lock-on button and press the trigger to start the saw . ...

  • Kawasaki 840108 - page 30

    MAINTENANCE AND CLEANING Always remove the battery pack before attempting cleaning or maintenance. This Cordless Reciprocating Saw is lubricated before it leaves the factory . This lubrication should last for the life of the tool. No further lubrication is required. Use only mild soap and a damp cloth to clean the tool. Never let any liquid get ins ...

  • Kawasaki 840108 - page 31

    OTHER CONSUMER DO-IT -YOURSELF (DIY) TOOLS Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy . If you would like further information on the following products, please contact Alltrade Customer Service Department at 1-800-590-3723. Cordless Drills/Screwdrivers Impact Wrenches Sanders Jigsaws Circular Saws Angle Grinders Recip ...

  • Kawasaki 840108 - page 32

    item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or replaced unit will be warranted under the terms of the remainder of the warran ...

  • Kawasaki 840108 - page 33

    REPRESENT A TIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO EVENT , WHETHER AS A RESUL T OF A BREACH OF CONTRACT , WARRANTY , TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALL TRADE’S AND/OR ITS REPRESENT A TIVE(S)’ LIABILITY EXCEED THE PRICE OF THE PRODUCT . ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT ...

  • Kawasaki 840108 - page 34

    COMPONENT #840108 18V BATTERY PACK INSTRUCTION MANUAL FOR CUSTOMER SERVICE POUR LE SERVICE APRÉS VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1-800-590-3723 Printed in China 87-1904-60957 KAW ASAKI™ IS A TRADEMARK LICENSED BY KAW ASAKI™ MOTORS CORP ., U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT . CONSUMER INQU ...

  • Kawasaki 840108 - page 35

    CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood. BA TTERY Before using battery pack, please read caref ...

  • Kawasaki 840108 - page 36

    PROTECTING THE ENVIRONMENT BA TTERIES Alltrade batteries can be recharged many times. At the end of their useful life, recy- cle batteries with due care for our environment. Ni-Cad and Ni-MH batteries are recyclable. T ake them to your local recycling center or call 1-800-822-8831 . Collected batteries will be recycled or disposed of properly . OTH ...

  • Kawasaki 840108 - page 37

    to determine whether any item or part is nonconforming and, if so, whether the item and/or part will be repaired and/or replaced. If the unit is repaired, new or reconditioned replacement parts may be used. If Alltrade chooses to replace the product, it may replace it with a new or reconditioned one of the same or comparable design. The repaired or ...

  • Kawasaki 840108 - page 38

    REPRESENT A TIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO EVENT , WHETHER AS A RESUL T OF A BREACH OF CONTRACT , WARRANTY , TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALL TRADE’S AND/OR ITS REPRESENT A TIVE(S)’ LIABILITY EXCEED THE PRICE OF THE PRODUCT . ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT ...

Manufacturer Kawasaki Category Drill

Documents that we receive from a manufacturer of a Kawasaki 840108 can be divided into several groups. They are, among others:
- Kawasaki technical drawings
- 840108 manuals
- Kawasaki product data sheets
- information booklets
- or energy labels Kawasaki 840108
All of them are important, but the most important information from the point of view of use of the device are in the user manual Kawasaki 840108.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Kawasaki 840108, service manual, brief instructions and user manuals Kawasaki 840108. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Kawasaki 840108.

Similar manuals

A complete manual for the device Kawasaki 840108, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Kawasaki 840108 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Kawasaki 840108.

A complete Kawasaki manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Kawasaki 840108 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Kawasaki 840108, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Kawasaki 840108, that we can find in the current document
3. Tips how to use the basic functions of the device Kawasaki 840108 - which should help us in our first steps of using Kawasaki 840108
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Kawasaki 840108
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Kawasaki 840108 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Kawasaki 840108?

Use the form below

If you did not solve your problem by using a manual Kawasaki 840108, ask a question using the form below. If a user had a similar problem with Kawasaki 840108 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)