Manual Epson CPD5719

12 pages 0.37 mb
Download

Go to site of 12

Summary
  • Epson CPD5719 - page 1

    EPSON ® Ethernet Card Supplement This guide includes new information about your EPSON ® multiprotocol Ethernet interface card and software. If you are using the card with Apple ® Macintosh a computers on AppleTalk ® or TCP/IP networks, please disregard the Macintosh section in your EPSON Type B Ethernet Interface Card User's Guide and foll ...

  • Epson CPD5719 - page 2

    Initializing the Ethernet Card After you install the Ethernet card in a printer or reinstall it in a new printer, plug in the printer while pressing down the status sheet button for at least three seconds to initialize the card. I I 0: ,.Ds @ I I I I status sheet button Printing a Status Sheet You can print a status sheet after you finish initializ ...

  • Epson CPD5719 - page 3

    Using Macintosh with the Ethernet Card Before configuring the Ethernet card, check to see if the correct printer driver is installed in the Macintosh. Make sure the printer is turned on and the Ethernet card is connected to the network. (See your Ethernet card User’s Guide and your printer User’s Guide for more information.) The information on ...

  • Epson CPD5719 - page 4

    To check the status of all printers that are turned on and enabled for a protocol, follow the steps below: 1. Open the EPSON Net! folder and click the EPSON Net! icon. The following window appears: Note: If you don‘t see any printers in the list, try selecting the zone that the printer is in or all zones by following the steps in the next section ...

  • Epson CPD5719 - page 5

    2. Click a zone to select it, press and hold the Shift key while clicking multiple zones to select them, or click Select All. 3. Click OK . EPSON Net! sends a packet to the selected zones and detects the current printer’s status. The EPSON Net! dialog box shows the latest information about the printers located in that zone. Sorting the Printers F ...

  • Epson CPD5719 - page 6

    Setting the Refresh lnterval Follow these steps to set the refresh interval for the settings in the EPSON Net! dialog box: 1. With the EPSON Net! dialog box open, choose Preferences from the Options menu bar. Refresh interval (sec) pq (DKI [Cancel ) 2. Type any value from 5 (default) to 90 seconds and click OK. EPSON Net! monitors the printers by p ...

  • Epson CPD5719 - page 7

    2. Highlight the printer you want to configure in the list. 3. Click Open. You see the Configuration dialog box: 4. Click the AppleTalk icon. Make sure the correct serial number of your Ethernet card is displayed. 5. Set the following options in the AppleTalk Configuration box: CL Available Zone: Select the network zone that you want the printer to ...

  • Epson CPD5719 - page 8

    6. Click OK to send the new settings to the Ethernet card and return to the EPSON Net! dialog box. Click Update to send the new settings to the card without closing the Configuration dialog box. Caution: Once you make changes to the Ethernet card, wait at least five minutes before turning off or restarting your printer. 7. Click Exit to exit EPSON ...

  • Epson CPD5719 - page 9

    4. Click the TCP/IP icon. Make sure the Configuration dialog box shows the correct serial number of the target Ethernet card. 5. Set the following options in the TCP/IP Configuration dialog box: U IP address: Determine and assign an IP address for the Ethernet card. Q Subnet mask: Assign the subnet mask. tl Auto IP set: Click Off. 6. Click Update t ...

  • Epson CPD5719 - page 10

    4. Click Protocol and then the Add button. 5. Select Microsoft from the Manufacturers list and TCP/IP from the Network Protocols list. Then click OK. 6. Click OK again and follow any on-screen instructions to enable TCP/IP. Configuring the Ethernet Card for TCP/IP and Windows 95 Make sure that the Ethernet card installed in the printer is on the sa ...

  • Epson CPD5719 - page 11

    ping <IP address> for example: ping 127.0.1.200 You see a message similar to the following: Reply from 127.0.1.200: bytes=32 time<10ms TTL=30 Reply from 127.0.1.200: bytes=32 time<10ms TTL=30 Reply from 127.0.1.200: bytes=32 time<l0ms TTL=30 Reply from 127.0.1.200: bytes=32 time<l0ms TTL=30 This shows that the Ethernet card is set ...

  • Epson CPD5719 - page 12

    EPSON is a registered trademark of SEIKO EPSON CORPORATION. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. I Copyright 0 1997 by Epson America, Inc. 10/97 6B Printed on recycled paper with at least 10% post-cons ...

Manufacturer Epson Category Network Card

Documents that we receive from a manufacturer of a Epson CPD5719 can be divided into several groups. They are, among others:
- Epson technical drawings
- CPD5719 manuals
- Epson product data sheets
- information booklets
- or energy labels Epson CPD5719
All of them are important, but the most important information from the point of view of use of the device are in the user manual Epson CPD5719.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Epson CPD5719, service manual, brief instructions and user manuals Epson CPD5719. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Epson CPD5719.

Similar manuals

A complete manual for the device Epson CPD5719, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Epson CPD5719 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Epson CPD5719.

A complete Epson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Epson CPD5719 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Epson CPD5719, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Epson CPD5719, that we can find in the current document
3. Tips how to use the basic functions of the device Epson CPD5719 - which should help us in our first steps of using Epson CPD5719
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Epson CPD5719
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Epson CPD5719 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Epson CPD5719?

Use the form below

If you did not solve your problem by using a manual Epson CPD5719, ask a question using the form below. If a user had a similar problem with Epson CPD5719 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)