Manual Hoover HND 8510

17 pages 0.64 mb
Download

Go to site of 17

Summary
  • Hoover HND 8510 - page 1

    I nstruction B ook HND 8510 DISHWASHER ...

  • Hoover HND 8510 - page 2

    3 CONTENTS Safety advice Setting up, installation Wa ter softener unit Loading the salt Adjusting the upper basket Loading the dishes Information for test laboratories Loading the detergent T ypes of detergent Loading the rinse aid Cleaning the filters Some practical hints Routine cleaning and maintenance Description of the control panel T echnical ...

  • Hoover HND 8510 - page 3

    Electrical connection Plug your dishwasher into the power socket. If the plug we supply does not fit : ■ CUT IT OFF AND DESTROY IT! Yo u can't use it on other appliances, and the exposed wires could be dangerous if anyone plugged it in. ■ Fit a suitable plug, as follows: W ARNING! THIS APPLIANCE MUST BE EARTHED. Fuses and plugs This applia ...

  • Hoover HND 8510 - page 4

    7 Connecting the outlet hose ■ The outlet hose should disharge into a standpipe, making sure that there are no kinks (fig. 4) . ■ The standpipe must be at least 40 cm above floor level and it must have an internal diameter of at least 4 cm. ■ It is advisable to fit an anti-odour air trap (fig. 4X) . ■ If necessary the outlet hose can be ext ...

  • Hoover HND 8510 - page 5

    * The softener unit is set in the factory at level 4 (d4) as this satisfies the requirements of the majority of users. Regulate the setting of your water softener unit according to the degree of hardness of your water as follows: IMPORT ANT The dishwasher must be AL W A YS off before start this procedure. 1. Hold down the FIRST "PROGRAMME" ...

  • Hoover HND 8510 - page 6

    LOADING THE SAL T ■ On the bottom of the machine there is a container for the salt for regenerating the softener . ■ It is important to use only a salt that is specifically designed for dishwasher . Ot her types of salt contain small quantities of insoluble particles which over a long p eriod of time may affect and deteriorate the softener perf ...

  • Hoover HND 8510 - page 7

    13 12 LOADING DISHES Using the upper basket ■ The upper basket is provided with mobile racks hooked to the sides of the basket which can be regulated in two positions: upright and lowered. In the lowered position the racks may be used for tea and coffee cups, kitchen knives and ladles. Glasses with stems may be safely hung on the ends of the rack ...

  • Hoover HND 8510 - page 8

    14 LOADING THE DETERGENT The detergent IMPORT ANT It is essential to use a detergent that is specifically designed for dishwashers either in powder , liquid or tablet form. “FINISH” gives very good results and can be easily obtained. Unsuitable detergents (like those for washing up by hand) do not contain the proper ingredients for use in a dis ...

  • Hoover HND 8510 - page 9

    16 LOADING THE RINSE AID The rinse aid The rinse aid, which is automatically released during the last rinsing cycle, helps the dishes to dry quickly and prevents spots and stains forming. Filling the rinse aid container The rinse aid container can be found to the left of the detergent container (fig. A "3") . To open the lid, push the ref ...

  • Hoover HND 8510 - page 10

    19 PRA TICAL HINTS How to get really good wash results ■ Before placing the dishes in the dishwasher , remove any remaining food (bones, shells, pieces of meat or vegetables, coffee grounds, skin of fruit, cigarette ash, tooth picks etc. to avoid blocking the filters, water outlet and washing arm nozzles. ■ T ry not to rinse the dishes before l ...

  • Hoover HND 8510 - page 11

    20 WHEN CYCLE IS FINISHED After every wash it is essential to turn off water supply and to switch off the machine by pressing the On/Off button to the of f position. If the machine is not going to be used for some time, it is advisable to follow these rules: 1. do an empty wash with detergent in order to clean the machine of any deposits; 2. pull o ...

  • Hoover HND 8510 - page 12

    22 PROGRAMME SELECTION AND SPECIAL FUNCTIONS (Use in conjunction with programme guide) IMPORT ANT T he dishwasher has two very practical functions: - the "recommended" programme (which is set in the factory and is ideal for full-load daily use) for quick and accurate selection; - the memory function which saves the last programme used, so ...

  • Hoover HND 8510 - page 13

    AUTOMA TIC F AUL T SIGNALS 24 "DELA Y ST ART" button Dishwasher start time can be set with this button, delaying start from 1 to 23 hours. Proceed as follows to set a delayed start: ■ Press the "DELA Y ST ART" button ( "00" will appear on the display). ■ Press the button again to increase the delay in hours (each t ...

  • Hoover HND 8510 - page 14

    27 55°C/ 65°C 90/ 11 0 • •• • 130 • •• • • •• • 59 70°C • • •• • 175 45°C • •• • 29 5 • **WITH HOT W A TER THE TIME REMAINING UNTIL THE END OF THE PROGRAMME IS AUTOMA TICALL Y DISPLA YED WHILE THE PROGRAMME IS RUNNING. N/A = OPTION NOT A V AILABLE • • 26 Programme Description PROGRAMME GUIDE (“R ...

  • Hoover HND 8510 - page 15

    IDENTIFYING MINOR F AUL TS Should the dishwasher fail to operate, before contacting the Service Centre, make the following checks: 28 F AUL T CAUSE REMEDY 1 - Machine completely dead 2 - Machine does not draw water 3 - Machine does not discharge water 4 - Machine discharges water continuously 5 - Spray arms are not heard to rotate 6 - On electronic ...

  • Hoover HND 8510 - page 16

    The manufacturer declines all responsibility in the event of any printing mistakes in this booklet. The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics. Hoover guarantees all parts of this product for 5 years fr om the date of purchase. During that time Hoover wil ...

  • Hoover HND 8510 - page 17

    09.04 - 41029996 - www .graficaestampa.it - Printed in Italy - Imprimé en Italie EN 08705-400600 HOOVER SER VICE FOR YOUR LOCAL ENGINEER PLEASE CALL OUR NA TIONAL NUMBER Areas covered by HOOVER SERVICE DEALERS Also Channel Islands, Scilly Isles, Orkney , Shetlands See local telephone directory Hoover policy is one of continuous development and for ...

Manufacturer Hoover Category Dishwasher

Documents that we receive from a manufacturer of a Hoover HND 8510 can be divided into several groups. They are, among others:
- Hoover technical drawings
- HND 8510 manuals
- Hoover product data sheets
- information booklets
- or energy labels Hoover HND 8510
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hoover HND 8510.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hoover HND 8510, service manual, brief instructions and user manuals Hoover HND 8510. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hoover HND 8510.

Similar manuals

A complete manual for the device Hoover HND 8510, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hoover HND 8510 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hoover HND 8510.

A complete Hoover manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hoover HND 8510 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hoover HND 8510, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hoover HND 8510, that we can find in the current document
3. Tips how to use the basic functions of the device Hoover HND 8510 - which should help us in our first steps of using Hoover HND 8510
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hoover HND 8510
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hoover HND 8510 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hoover HND 8510?

Use the form below

If you did not solve your problem by using a manual Hoover HND 8510, ask a question using the form below. If a user had a similar problem with Hoover HND 8510 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)