English dropdown-ico

Manual McDATA OPENconnectors Command Line Interace

170 pages 2.25 mb
Download

Go to site of 170

Summary
  • McDATA OPENconnectors Command Line Interace - page 1

    McDATA Corporation 380 Interlocken Cresc ent Broomfield , CO 80021-3464 Cor por ate He adqu art er s : 800.545.5773 We b : www.mcdata.com Sales E -mail: sa les@ mcda ta.com McDA T A OPENconnector s Command Line Interface USER MANU AL P/N 6 20-000 134-500 REV B ...

  • McDATA OPENconnectors Command Line Interace - page 2

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 ii Record of Revisions and Updat es Copyri ght © 2002 Mc DATA Corp oration . All righ ts rese rved. Printe d October 2002 Sixth Edition No part of t his pub lication m ay be repr oduced o r distrib uted in any form or by any means, or stored i n a da tabase or retriev ...

  • McDATA OPENconnectors Command Line Interace - page 3

    P/N 620-000134 -500 McDA T A OPENconnectors Comm and Line Inter face USER MAN UAL iii Preface ................ ........... ........... ............ ................. ........... ........... ............ ................ ....... ix Chap ter 1 Intr oductio n Command Line Interface Overview.................... ........... ................1-2 Entering ...

  • McDATA OPENconnectors Command Line Interace - page 4

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Contents iv Chapter 2 CLI Commands Comma nd Ove rvie w ............. ........... ................. ........... ........... ......... 2-2 config .......... ............ ........... ................. ........... ............ ................ ......... 2-2 config.features. ...

  • McDATA OPENconnectors Command Line Interace - page 5

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Conte nts v config.zoning ...... ........... ................. ........... ............ ........... ....... 2-44 config.zoning.setDefZ oneState .......... ................. ........... ....... 2-44 config.zoning.activateZo neSet ................ ................. . ...

  • McDATA OPENconnectors Command Line Interace - page 6

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Contents vi show .port.status .............. ........... ........... ............ ................ ....... 2-79 show.port.technology .... ................. ........... ........... ................. . 2-82 show.security.fabricBinding .......... ........... .............. ...

  • McDATA OPENconnectors Command Line Interace - page 7

    P/N 620-000134 -500 McDA T A OPENconnectors Comm and Line Inter face USER MAN UAL vii 1-1 CLI Command Tree Navigation Conventions ................ ................. ......... 1-3 1-2 CLI Command Tree ............... ........... ........... ............ ................. ........... ......... 1-5 1-3 CLI Command Tree for th e ED-5000 Di rector ..... ...

  • McDATA OPENconnectors Command Line Interace - page 8

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 T ables viii ...

  • McDATA OPENconnectors Command Line Interace - page 9

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL ix 3U H I D F H This pub lica tio n is p art of t he do cume ntat ion suit e th at sup port s t he McDA T A® Sphereon™ 301 6 Fabric Switch, Sph ereon 3032 Fabric Switch, Spher eon 3216 Fabric Sw itch, Spher eon 3232 Fabric Switch, Spher eon 4500 Fabric Switch, I ...

  • McDATA OPENconnectors Command Line Interace - page 10

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Preface x • McDA T A products in the user ’ s ne twork The publication s listed in Related Publications provide consid erable information about b oth concepts and McD A T A products. Organization of This Manual This pub lica tio n is or gan ized as foll ows : Chapte ...

  • McDATA OPENconnectors Command Line Interace - page 11

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Preface xi • McDA T A I ntrepid 61 40 Directo r Installa tion and Servic e Manual (620-000 157) • McDA T A O PENconn ecto rs SNMP Support Manual (620- 000131) • McDA T A SANpilot User Manual (620 -000160) • McDA T A Sphereon 3016 and 3216 Fabric Switch P r ...

  • McDATA OPENconnectors Command Line Interace - page 12

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Preface xii Manual Conventions The following notational conventions are used in this document: A note presents im port ant in form ation t hat is no t hazard- related. Where to Get H elp For technical support, McDA T A end-user customers should call the phone number loc ...

  • McDATA OPENconnectors Command Line Interace - page 13

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Preface xiii Forwarding Publication Comments W e si ncerely appreciate any comments about this publication. Di d you find this manual easy or difficult to use? Did it lack necessary information? W ere there any errors? Could its organization be improved? Please sen ...

  • McDATA OPENconnectors Command Line Interace - page 14

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Preface xiv ...

  • McDATA OPENconnectors Command Line Interace - page 15

    Introductio n 1-1  This chapter intro duces the Command Line Interface (CLI) and describes the essentials for using the CLI commands. ,QW URG XFWL RQ Section Pa ge Comm and Lin e Interf ace Ove rview 1-2 Entering Com mand Line In terface Commands 1-3 Logging In and Logging Out 1- 1 1 Using t he comm aDel im Comman d 1- 13 Handling Com mand Lin e ...

  • McDATA OPENconnectors Command Line Interace - page 16

    1 Intr oduction McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 1-2 &RPPDQ G/L QH ,QWH UI DFH 2Y HUYL HZ The Command L ine Interface (CLI) is a f eature that pr ovides a n alternative to McDA T A ’ s Enterprise Fabric Con nectivity Manag er (EFCM) and SANpilo t interface products for director and sw ...

  • McDATA OPENconnectors Command Line Interace - page 17

    Introd uction Entering Comman d Line Inter face Com mands 1 1-3 (QWH UL QJ& RPPDQ G/LQ H, QWH UID FH &RPPDQ GV The CLI commands can be enter ed dir ectly at the command line of a terminal or co ded in a script. Note that the CLI commands are not case sensitive. 'RF XPH QWD WLR Q &RQY HQ WLR QV Throughout this publica ...

  • McDATA OPENconnectors Command Line Interace - page 18

    1 Intr oduction McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 1-4 ^B Control- B Position the cur sor left one character. ^D Control-D Delete the current charac ter . ^E Control- E Position the cur sor to the end of the line. ^F Control-F Pos ition the cur sor right one character. ^H Control- H Backspace one c ha ...

  • McDATA OPENconnectors Command Line Interace - page 19

    Introd uction Entering Comman d Line Inter face Com mands 1 1-5 &RPPDQG7 UHH The comman d tr ee of the CLI be gins fr om the r oot. The commands in the four extended bran ches (config, maint, perf, and show) ar e described in Chapter 2 , CLI Co mmands . There ar e three additional commands (login, logout, and commaDelim) th at are globally a ...

  • McDATA OPENconnectors Command Line Interace - page 20

    1 Intr oduction McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 1-6 sho w userRights ------- ------ - administrator operator sho w snmp - ------- ------- ---- -- addCommunit y authTraps deleteCommun ity show switc h ------- ---- ------- -- bbCred it domain RSCN edTOV insistDomain Id interopMode prefDomain Id prior ...

  • McDATA OPENconnectors Command Line Interace - page 21

    Introd uction Entering Comman d Line Inter face Com mands 1 1-7 deleteWwnMem deletePortMem renameZone showPending showActive maint -- ------- ----- ------ - port --- ------ ------- ---- --- beaco n reset system - ----- ------ ----- - beacon clearSysError ipl resetConfig setOnlineState perf -- ------ ----- ------ ---- clas s2 class3 clearStats error ...

  • McDATA OPENconnectors Command Line Interace - page 22

    1 Intr oduction McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 1-8 Note that the comm ands are shown, with the exception of th e zoning commands, in alphabetical or der to make them ea sier to locate. Although the co mmand s can be entered in any order , dependin g on the re sul ts d esir ed, th e or der sh own i ...

  • McDATA OPENconnectors Command Line Interace - page 23

    Introd uction Entering Comman d Line Inter face Com mands 1 1-9 Maint> port Maint.Port> beacon 4 true Another appro ach to making the navigation more concise is to use the complete co mmand syntax from the Root> prompt each time. Fo r example, to issue the config.port.name command and then the maint.port.beacon command, the commands are en ...

  • McDATA OPENconnectors Command Line Interace - page 24

    1 Intr oduction McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 1-10 3 DUDPHWHUV Some command parameters accept character strings that include spaces. Quotation marks ar e required w hen a string includes spaces. Config.System> location Building_24_Ro om_16 Config.System> location "Building 24 R oom 16& ...

  • McDATA OPENconnectors Command Line Interace - page 25

    Introd uction Log ging In and Loggi ng Out 1 1-1 1 / RJJL QJ ,QDQ G/ RJJLQJ 2XW The CLI allows a sin gle T eln et client to be connected to the swi tch. If a T eln et client logs out, or if after 15 minutes o f inactivity the client ’ s access times out , another T el net client may log in . Also note that th e T eln et client (user) ...

  • McDATA OPENconnectors Command Line Interace - page 26

    1 Intr oduction McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 1-12 The access rights chosen for the CLI are completely independent of the other product interfaces, for example, SNMP or McDA T A product interfaces. 3 DUDP HWHUV This co mman d has no par amet ers. &RP PDQG([ DPSOHV login Username: Administr ...

  • McDATA OPENconnectors Command Line Interace - page 27

    Introd uction Using t he comma Delim C ommand 1 1-1 3 8VLQ JW KHF RPPD'H OLP &RPPDQG Note that the output examples shown in the other sections of this publication presume that commaDelim is of f. FRPPD' HOLP 6QW D[ commaDelim enable 3XUSRV H This command ena bles the user to obtain dis played info rmation in comma-delimited, ...

  • McDATA OPENconnectors Command Line Interace - page 28

    1 Intr oduction McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 1-14 +DQGOLQJ &R PPDQG /LQH ,QWHUIDFH( UURUV T wo ty pes of err ors detected by the CLI ar e: • An error as sociated with the interface. For example, a keyw ord is misspelled or does not exist. Root> confg Error 234: Invalid Comma ...

  • McDATA OPENconnectors Command Line Interace - page 29

    Introd uction Using the Comma nd Line Inter face Help 1 1-1 5 8VLQJWKH &RP PD QG/LQH, QWHUIDFH+ HOS The question mark (?) can be used wi thin a command to obtain certain information: • If the question mark is used in place of a command keyword, all the keywords at that level of the CLI command tree display . Root> config sys ...

  • McDATA OPENconnectors Command Line Interace - page 30

    1 Intr oduction McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 1-16 &RPPHQ WLQ J6 FUL SWV The pound sign (#) can be us ed to add comments in a script file. The pound sign must be the f irst character in the lin e; the CLI ignores everything after the pound sig n in that line. The followin g lines are valid ...

  • McDATA OPENconnectors Command Line Interace - page 31

    Introd uction ED-5000 D irector 1 1-1 7 (' 'LU HFW RU A subset of the CLI commands described in this publication ar e avail abl e on th e ED- 5000 Di recto r ™ . The globally availa ble commands (l ogin, logout, an d commaDelim) ar e described previously in this chap ter . The following con fig, maint, and sh ow comman ...

  • McDATA OPENconnectors Command Line Interace - page 32

    1 Intr oduction McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 1-18 7 HOQHW6HVV LRQ The CLI can only be used thr ough a T elnet clien t session in an out- of-b and m anage men t en vir onme nt, usi ng the Ethern et p ort in t he director or switch. Although the primary use of the CLI is in host-based scripting ...

  • McDATA OPENconnectors Command Line Interace - page 33

    CLI Co mmand s 2-1  This cha pter describes the Command Line Interf ace (CLI) comman ds, including their syntax, purpose, and parameters, as well as examples of their usage and any output that they generate. &/, &R PPDQ GV Section Pa ge Command Ov ervie w 2-2 config 2-2 maint 2-55 perf 2-59 show 2-67 ...

  • McDATA OPENconnectors Command Line Interace - page 34

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-2 &RPPDQ G2YH UY LHZ Most of the comman ds in this chapter ar e listed in alphabetical order to make them easy to locate. Although the comman ds can be enter ed in any or der , depending on the r esults desire d (so lon g as the tr ee structu ...

  • McDATA OPENconnectors Command Line Interace - page 35

    CLI Com mands config 2 2-3 FRQILJIHDWXUHVHQWHUSULVH) DE0RGH 6QW D[ enterpriseFabMode ente rpriseFabModeState 3XUSRV H This command sets the Enterpris e Fabric Mode state for the fabric. The McDA T A SANtegrity ™ f eatu r e key mu st be in sta lled to acti vat e the Enterprise Fabric Mode state. 3 DUDP HWHUV This co mman d ha s one para met ...

  • McDATA OPENconnectors Command Line Interace - page 36

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-4 FRQILJIHDWXUHVLQVWDOO. H 6QW D[ installKey featureKey 3XUSRV H This command allows the user to install a feature s et that is enabled by the provided feature key . The switch ca n be either offline or o nline when this command is executed ...

  • McDATA OPENconnectors Command Line Interace - page 37

    CLI Com mands config 2 2-5 FRQILJIHDWXUHVVKRZ 6QW D[ show 3XUSRV H This comm and show s the product feature informa tion con figured for this switch. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> config features show 2XWS XW The product featur e data is displayed as a table that includes the following pro ...

  • McDATA OPENconnectors Command Line Interace - page 38

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-6 FRQILJLSHWKHUQHW 6QW D[ ethernet ipAddress gat ewayAddress subnetMask 3XUSRV H This command sets the Ethern et network setting s. 'HVFU LS WLRQ The T elnet conne ction can be lost when t hese Ethernet network settings are changed . If ...

  • McDATA OPENconnectors Command Line Interace - page 39

    CLI Com mands config 2 2-7 2XWS XW The LA N configuration d ata is displayed as a table that in cludes the following properties. 2XWSXW([DPS OH The output fr om the config.ip.show command displays as follows. IP Address: 10.0.0.0 Gateway Address: 0.0.0.0 Subnet Mask: 255.0.0.0 FRQILJSRUWEORFNHG 6QW D[ blocked portNumber blo ckedState 3XUS ...

  • McDATA OPENconnectors Command Line Interace - page 40

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-8 FRQILJSRUWH[W'LVW 6QW D[ extDist portNumber ext DistOn 3XUSRV H This command sets the exten ded distance state fo r a port. (The Spher eon 4500 does n ot accept this command.) 'HVFU LS WLRQ When the extended distance field is tr u ...

  • McDATA OPENconnectors Command Line Interace - page 41

    CLI Com mands config 2 2-9 FRQILJSRUWIDQ 6QW D[ fan portNumber fanOn 3XUSRV H This comman d sets the fa bric addr ess notifi cation (F A N) state fo r a port (Sphereon 4500 on ly). This config uration can be applied to any port regardless of its cu rrent configuration. T he F AN value i s applied at the time the port is configur ed and opera ...

  • McDATA OPENconnectors Command Line Interace - page 42

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-10 FR QIL JSR UW QD PH 6QW D[ name portNumber “ portN ame ” 3XUSRV H This command sets the na me for a port. 3 DUDP HWHUV This c omm and ha s tw o r eq uir ed para mete rs. &RPPD QG ([DPS OH Root> config port name 4 “ Sam ’ ...

  • McDATA OPENconnectors Command Line Interace - page 43

    CLI Com mands config 2 2-1 1 FRQILJSRUWVSHHG 6QW D[ speed portNumber portSpeed 3XUSRV H This command sets the sp eed for a port. 'HVFU LS WLRQ A port can be configur ed to operate at 1 Gbps, 2 Gbps, o r a negotiat ed speed. The port speed can be set only to 1 Gbps if the switch speed is 1 Gbps. An a ttempt to set th e port speed to 2 Gb ...

  • McDATA OPENconnectors Command Line Interace - page 44

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-12 FRQILJSRUWWSH 6QW D[ type portNumber portTy pe 3XUSRV H This command sets the allowed type for a port. 'HVFU LS WLRQ A port can be configured as a n F_Port, an E_Port, or a G_Port. On a Spher eon 45 00, a port can also be an Fx_p ort ...

  • McDATA OPENconnectors Command Line Interace - page 45

    CLI Com mands config 2 2-1 3 FRQILJSRUWVKRZ 6QW D[ show portNumber 3XUSRV H This command dis plays the port con figuration for a s ingle port. 'HVFU LS WLRQ This show command, on the config.port branch, displays the current conf igu rati on fo r the specif ied p ort. 3 DUDP HWHUV This co mman d ha s one para meter . &RPPD QG ([DP ...

  • McDATA OPENconnectors Command Line Interace - page 46

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-14 2XWSXW([DPS OH The output fr om the config.port.show command displays as follows. Port Number: 4 Name: Sam ’ s tape drive Blocked: false Extended distance: false Type: F Port Speed: 2 Gb/sec FRQILJVHFXULW  IDEULF%LQGLQJ Note that the ...

  • McDATA OPENconnectors Command Line Interace - page 47

    CLI Com mands config 2 2-1 5 This comm and takes effec t immedia tely . The CLI ve rifies the list befor e activa ting it t o the fab ric an d adds th e manage d switch t o the list if it is not alr eady pr esent. 3 DUDP HWHUV This co mman d has no par amet ers. Root> config security fabricBinding activatePending config.security.fabricBinding.ad ...

  • McDATA OPENconnectors Command Line Interace - page 48

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-16 config.security.f abricBinding.clearMe mList 6QW D[ clearMemList 3XUSRV H This co mman d cle ars t he f abri c me mber ship lis t fo r t he p endin g fabric binding wo rking area. This infor mation is not saved to the fa bric u ntil the activ at ...

  • McDATA OPENconnectors Command Line Interace - page 49

    CLI Com mands config 2 2-1 7 config.security.fabricBinding.replacePending 6QW D[ replacePending 3XUSRV H This command replaces the pendin g working area with the fabric binding config uration that is currently loaded on the fabric. 3 DUDP HWHUV This co mman d has no par amet ers. Root> config security fabricBinding replacePending config.securit ...

  • McDATA OPENconnectors Command Line Interace - page 50

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-18 config.security.f abricBinding.show Active 6QW D[ showActive 3XUSRV H This comm and displa ys the fabri c binding configurati on saved on the fabric. It performs the same function as show .s ecurity .fabricBinding. 3 DUDP HWHUV This co mman d ha ...

  • McDATA OPENconnectors Command Line Interace - page 51

    CLI Com mands config 2 2-1 9 config.security.f abricBinding.showPe nding 6QW D[ showPending 3XUSRV H This command d isplays th e fabric binding conf iguration in the pending workin g area and has not yet been activat ed to the fabric. If no changes have been made to the pend ing environment, the CLI displays the Active membership list. 3 DUDP HWHU ...

  • McDATA OPENconnectors Command Line Interace - page 52

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-20 FRQILJVHFXULW  SRUW%LQGLQJ config.security.po rtBinding.bound 6QW D[ bound portNumber portBindingState 3XUSRV H This command sets the port binding state for a given port. 3 DUDP HWHUV This command has two parameters. &RP PDQG([ DPS ...

  • McDATA OPENconnectors Command Line Interace - page 53

    CLI Com mands config 2 2-2 1 config.security.po rtBinding.wwn 6QW D[ wwn portNumber boundWw n 3XUSRV H This command co nfigures the single device WWN to which a port is bound. 3 DUDP HWHUV This command has two parameters. portNumber Specified the po rt number for which the bound WWN is being set. V alid port number values ar e: 0 – 15 for th e S ...

  • McDATA OPENconnectors Command Line Interace - page 54

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-22 &RP PDQG([ DPSOHV Root> config security portBinding wwn 4 AA:99:23:23:08:14:88:C1 Root> config security portBinding wwn 4 attached Root> config security portBinding wwn 4 remove config.security.po rtBinding.show 6QW D[ show portN ...

  • McDATA OPENconnectors Command Line Interace - page 55

    CLI Com mands config 2 2-2 3 FRQILJVHFXULW  VZLWFK%LQGLQJ config.security.switchBinding.addMember 6QW D[ addMember wwn 3XUSRV H This command adds a new member to the Sw itch Membership List. A maximu m number of 256 me mbers ma y be added to the swi tch membership list. 3 DUDP HWHUV This co mman d ha s one para meter : Root> config secur ...

  • McDATA OPENconnectors Command Line Interace - page 56

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-24 config.security.s witchBinding.setState 6QW D[ setState switchBinding State 3XUSRV H This command sets the switch binding state on the switch. 3 DUDP HWHUV This c omman d ha s one para mete r: Root> config security switchBinding se tState all ...

  • McDATA OPENconnectors Command Line Interace - page 57

    CLI Com mands config 2 2-2 5 config.security.s witchBinding.show 6QW D[ show 3XUSRV H This command d isplays th e switch binding co nfigurati on. 3 DUDP HWHUV This co mman d has no par amet ers. 2XWS XW Thi s command dis plays th e following sw itch bindin g configuratio n data: 2XWSXW([DPS OH The output fr om the config.security .portBinding.s ...

  • McDATA OPENconnectors Command Line Interace - page 58

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-26 FRQILJVHFXULW  XVHU5LJKWV config.security.user Rights.administrator 6QW D[ administrator “ usernam e ” “ password ” 3XUSRV H This co mmand set s the name and passw or d f or a dmin istr ato r- le vel access. 'HVFU LS WLRQ Im ...

  • McDATA OPENconnectors Command Line Interace - page 59

    CLI Com mands config 2 2-2 7 config.security.us erRights.operator 6QW D[ operator “ username ” “ p assword ” 3XUSRV H This command sets the n ame and passwor d for opera tor-l evel access. 3 DUDP HWHUV This command has two parameters. &RPPD QG ([DPS OH Root> config security userRights operator “ Operator ” “ newpassword ” ...

  • McDATA OPENconnectors Command Line Interace - page 60

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-28 config.security.us erRights.show 6QW D[ show 3XUSRV H This command show s the user rights for the CLI acces s levels. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> config security userRights show 2XWS XW The ...

  • McDATA OPENconnectors Command Line Interace - page 61

    CLI Com mands config 2 2-2 9 FRQILJVQ PSDGG&RPPXQLW 6QW D[ addCommunity commIndex "commName" writeAuthorization trapRecipient udpPortNum 3XUSRV H This command adds a n SNMP community to the SNMP configuration. 3 DUDP HWHUV This c omman d has f ive paramete rs. Up to six community names a nd trap recipients may be defined. & ...

  • McDATA OPENconnectors Command Line Interace - page 62

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-30 FRQILJVQ PSDXWK7 U DSV 6QW D[ authTraps enabledState 3XUSRV H This command enables or disables the authorizatio n traps to be sent to SNMP management stations when unauthorized stations try to access SNMP information fr om the director or ...

  • McDATA OPENconnectors Command Line Interace - page 63

    CLI Com mands config 2 2-3 1 FRQILJVQ PSVKRZ 6QW D[ show 3XUSRV H This command shows the switch SNMP configuration. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> config snmp show 2XWS XW The s witch configu ration data is displayed as a table that in cludes the following properties. 2XWSXW([DPS OH The ...

  • McDATA OPENconnectors Command Line Interace - page 64

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-32 FRQILJVZLWFK Some of the config.switch commands r equire that the switch be set offline. ( Use the maint.system.setOnlineState to set the switch offline.) If these commands ar e enter ed while the switch is online, an error message results. FR ...

  • McDATA OPENconnectors Command Line Interace - page 65

    CLI Com mands config 2 2-3 3 FRQILJVZLWFK LQVLVW'RPDLQ,G 6QW D[ insistDomainId insiste ntDomainIdState 3XUSRV H This command sets the insistent domain ID state for the switch. 3 DUDP HWHUV This co mman d ha s one para meter . &RPPD QG ([DPS OH Root> config switch insistDomainId 1 FRQILJVZLWFK HG7 29 6QW D[ edTOV timeout ...

  • McDATA OPENconnectors Command Line Interace - page 66

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-34 FRQILJVZLWFK LQWHURS0RGH 6QW D[ interopMode interopMod e 3XUSRV H This command sets the in ter operability mode for the switch . The switch must be offline to complete this command. 'HVFU LS WLRQ The switch must be set of fline befor ...

  • McDATA OPENconnectors Command Line Interace - page 67

    CLI Com mands config 2 2-3 5 FRQILJVZLWFK SULRULW 6QW D[ priority switchPriorit y 3XUSRV H This command sets the sw itch priority . 'HVFU LS WLRQ The switch must be set of fline befor e this command is entere d. 3 DUDP HWHUV This co mman d ha s one para meter . &RPPD QG ([DPS OH Root> config switch priority principal switchPr ...

  • McDATA OPENconnectors Command Line Interace - page 68

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-36 FRQILJVZLWFK UD7 2 9 6QW D[ raTOV timeoutValue 3XUSRV H This command sets the R _A_TOV for the switch. 'HVFU LS WLRQ The switch must be set of fline befor e this command is entered. Special car e should be used when scripting this com ...

  • McDATA OPENconnectors Command Line Interace - page 69

    CLI Com mands config 2 2-3 7 FRQILJVZLWFK UHURXWH'HOD 6QW D[ rerouteDelay rerouteDe layState 3XUSRV H This command ena bles or disables rerouting delay for the swi tch. 'HVFU LS WLRQ The switch can be either of fli ne or online when this command is executed. This command is only applicable if the configured switch is in a multiswi ...

  • McDATA OPENconnectors Command Line Interace - page 70

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-38 FRQILJVZLWFK VSHHG 6QW D[ speed switchSpeed 3XUSRV H This command sets the speed fo r the switch. This comm and is on ly applica ble for th e Intr epid 6064. Spher eon pr oducts cannot ch ange switch s peed. 'HVFU LS WLRQ The switch m ...

  • McDATA OPENconnectors Command Line Interace - page 71

    CLI Com mands config 2 2-3 9 FRQILJVZLWFK VKRZ 6QW D[ show 3XUSRV H This command shows the switch configuration. 3 DUDP HWHUV This co mman d has no par amet ers. 'HVFU LS WLRQ The switch can be either of fli ne or online when this command is executed. &RPPD QG ([DPS OH Root> config switch show 2XWS XW The s witch configu ratio ...

  • McDATA OPENconnectors Command Line Interace - page 72

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-40 2XWSXW([DPS OH The output fr om the config.switch.show command displays as follows. BB Credit: 2 R_A_TOV: 20 E_D_TOV: 4 Preferred Domain Id: 1 Switch Priority: Principal Speed: 2 Gb/sec Rerouting Delay: Enabled Interop Mode: Open Fabric 1.0 In ...

  • McDATA OPENconnectors Command Line Interace - page 73

    CLI Com mands config 2 2-4 1 FRQILJVV WHPGDWH 6QW D[ date sysDate sysTime 3XUSRV H This command sets the sy stem date and time. 3 DUDP HWHUV This c omm and ha s tw o r eq uir ed para mete rs. &RP PDQG([ DPSOHV Root> config system date 04:16:2001 10 :34:01 Root> config system date 10/09/2001 14 :07:55 FRQILJVV WHPGHVFULSW ...

  • McDATA OPENconnectors Command Line Interace - page 74

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-42 FRQILJVV WHPORFDWLRQ 6QW D[ location “ systemLocati on ” 3XUSRV H This command sets the sy stem location attribute. 3 DUDP HWHUV This c omman d ha s one para mete r . &RPPD QG ([DPS OH Root> config system location “ Everyw ...

  • McDATA OPENconnectors Command Line Interace - page 75

    CLI Com mands config 2 2-4 3 FRQILJVV WHPVKRZ 6QW D[ show 3XUSRV H This comma nd shows th e system con figuration. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> config system show 2XWS XW The system configuration is displayed as a table that includes the following properties. 2XWSXW([DPS OHV Th e outp ...

  • McDATA OPENconnectors Command Line Interace - page 76

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-44 FRQILJ]RQLQJ Note that the config.zoning commands function in a dif fer ent way fro m most CLI commands, which are s ingle action commands that take effect immediat ely . A zoning configuration is typical ly too com pli cat ed t o b e de scr i ...

  • McDATA OPENconnectors Command Line Interace - page 77

    CLI Com mands config 2 2-4 5 FRQILJ]RQLQ JDFWLYDWH=RQ H6HW 6QW D[ activateZoneSet 3XUSRV H This command activates th e zone set contained in the work area to the fabric and takes eff ect immediately . 'HVFU LS WLRQ This c ommand t akes ef fect im mediately in the fabric. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ( ...

  • McDATA OPENconnectors Command Line Interace - page 78

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-46 FRQILJ]RQLQJ UH SODFH=RQH6HW 6QW D[ replaceZoneSet 3XUSRV H This command replaces the work area with the active zone set that is currently loaded on the fabric. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root ...

  • McDATA OPENconnectors Command Line Interace - page 79

    CLI Com mands config 2 2-4 7 FRQILJ]RQLQ JDGG=RQH 6QW D[ addZone “ zoneName ” 3XUSRV H This command adds a new ( empty) zone to the zone set in th e work area. 'HVFU LS WLRQ Changes are not activated on the switch unti l the config.zoning.activateZoneSet command is issued. The CLI supports the number o f zones per zone set spe cifie ...

  • McDATA OPENconnectors Command Line Interace - page 80

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-48 FRQILJ]RQLQJ UHQDPH=RQH6HW 6QW D[ renameZoneSet “ zoneSet Name ” 3XUSRV H This command changes the name of the zo ne set in the work are a. 'HVFU LS WLRQ Changes are not activated on the switch unti l the config.zoning.activateZ o ...

  • McDATA OPENconnectors Command Line Interace - page 81

    CLI Com mands config 2 2-4 9 FRQILJ]RQLQ JDGG3 RUW0HP 6QW D[ addPortMem “ zoneName ” domainId portNumber 3XUSRV H This command adds th e domain ID and port number of a zone member to the specified zone in th e work area. Port n umbers can not be used for zon e memb ers if the inter operabi lity mode for the s witch o r dire ctor is s et ...

  • McDATA OPENconnectors Command Line Interace - page 82

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-50 FRQILJ]RQLQJ FOH DU=RQH 6QW D[ clearZone “ zoneName ” 3XUSRV H This command clears all z one members for the specified zone in the work area. 'HVFU LS WLRQ This comm and does not change the zone name. 3 DUDP HWHUV This c omman d h ...

  • McDATA OPENconnectors Command Line Interace - page 83

    CLI Com mands config 2 2-5 1 FRQILJ]RQLQ JGHOHWH3 RUW0HP 6QW D[ deletePortMem “ zoneNam e ” domainId portNumber 3XUSRV H This comman d deletes a domai n ID and port number for a z one member in the specified zone in the wor k area. 3 DUDP HWHUV This c omman d ha s th r ee pa rame ters . &RPPD QG ([DPS OH Root> config zoning del ...

  • McDATA OPENconnectors Command Line Interace - page 84

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-52 FRQILJ]RQLQJ  UHQDPH=RQH 6QW D[ renameZone “ oldZoneNam e ” “ newZoneName ” 3XUSRV H This command r enames a z one in the work area . 3 DUDP HWHUV This command has two parameters. &RPPD QG ([DPS OH Root> config zoning ren ...

  • McDATA OPENconnectors Command Line Interace - page 85

    CLI Com mands config 2 2-5 3 FRQILJ]RQLQ JVKR Z3 HQGLQJ 6QW D[ showPending 3XUSRV H This comm and s hows t he zo ning c onf igur ation in th e wor k ar ea of the zone set that ha s not yet been activated. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> config zoning showPending 2XWS XW The z oning config ur ...

  • McDATA OPENconnectors Command Line Interace - page 86

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-54 FRQILJ]RQLQJ VKRZ$FWLYH 6QW D[ showActive 3XUSRV H This comm and sho ws the zoni ng conf igu ration save d on t he fab ric. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> config zoning showActive 2XWS XW ...

  • McDATA OPENconnectors Command Line Interace - page 87

    CLI Com mands maint 2 2-5 5 PDLQW The maint branch of the CLI command tr ee contains commands that relate to maintenance activities. The commands in the maint branch can be used only by the admin istra tor . Note that the maint.system.resetConfig command resets all configuratio n data and no n-volatile setti ngs, includi ng network information, to ...

  • McDATA OPENconnectors Command Line Interace - page 88

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-56 PDLQWSRUWUHVHW 6QW D[ reset portNumber 3XUSRV H This command r esets a port. 'HVFU LS WLRQ This command resets an individ ual port without a ffecting any other ports. However , if a device is attach ed to the port and the device is on ...

  • McDATA OPENconnectors Command Line Interace - page 89

    CLI Com mands maint 2 2-5 7 PDLQWVVWHPFO HDU6V(UURU 6QW D[ clearSysError 3XUSRV H This command clears the syst em error light. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> maint system clearSysError PD LQ WV V WH P LSO 6QW D[ ipl 3XUSRV H This command IPLs the switch . 'HVFU LS WLRQ Connec ...

  • McDATA OPENconnectors Command Line Interace - page 90

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-58 PDLQWVVWHPUHVHW&RQILJ 6QW D[ resetConfig 3XUSRV H This command resets all NV -RAM confi guration parameters to th eir default values, including featur e key s and IP addr esses. 'HVFU LS WLRQ This command IPLs the s witch. Connec ...

  • McDATA OPENconnectors Command Line Interace - page 91

    CLI Com mands per f 2 2-5 9 SHUI The perf branch of th e CLI command tree co ntains commands that relate to performance services. The commands in the perf branch can by used by either the administrator or the operator . Note that the counters in perf com mand ou tput are 32-bit values th at wrap at 4,294 ,967, 296. T o calcu late t he full v alue o ...

  • McDATA OPENconnectors Command Line Interace - page 92

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-60 2XWSXW([DPS OH The output fr om the perf.class2 command displays as follows. SHUI FODVV 6QW D[ class3 portNumber 3XUSRV H This command displays port Class 3 counters for a single port. TxFra mes The numb er of F ibre Chan nel Cla ss 2 f ...

  • McDATA OPENconnectors Command Line Interace - page 93

    CLI Com mands per f 2 2-6 1 3 DUDP HWHUV This co mman d ha s one para meter . &RPPD QG ([DPS OH Root> perf class3 2 2XWS XW The port Class 3 co unter data is displa yed as a table tha t includes th e following statistics, alo ng with a wrap count for each corr esponding counter . 2XWSXW([DPS OH The output fr om the perf.class3 command ...

  • McDATA OPENconnectors Command Line Interace - page 94

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-62 SHUI FOHDU6WDWV 6QW D[ clearStats portNumber 3XUSRV H This command re sets all port statistics for an individual port or for all ports. 3 DUDP HWHUV This c omman d ha s one para mete r . &RPPD QG ([DPS OH Root> perf clearStats 4 Roo ...

  • McDATA OPENconnectors Command Line Interace - page 95

    CLI Com mands per f 2 2-6 3 2XWS XW The po rt err or counter data is displayed as a table that in cludes the followi ng statistics . 2XWSXW([DPS OH The output fr om the perf.err ors command displays as follows. Port 2 Statistic Count ----------- ---------- Prim Seq Err 753452 Disc Frms 351269 Inv Tx Wrds 2953184 CRC Errs 1842953 Delim Errs 29531 ...

  • McDATA OPENconnectors Command Line Interace - page 96

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-64 SHUI OLQN 6QW D[ link portNumber 3XUSRV H This command displays port link counters for a single port. 3 DUDP HWHUV This c omman d ha s one para mete r . &RPPD QG ([DPS OH Root> perf link 2 2XWS XW The port link counter data is displ ...

  • McDATA OPENconnectors Command Line Interace - page 97

    CLI Com mands per f 2 2-6 5 2XWSXW([DPS OH The output from the perf.link command di splays as follow s. Port 2 Statistic Count ----------- ---------- OLS In 753452 OLS Out 351269 Reset In 2953184 Reset Out 1842953 Link Flrs 2953184 Sync Losses 1842953 Sig Losses 35246 SHUI WUDIILF 6QW D[ traffic portNumber 3XUSRV H This command displays port ...

  • McDATA OPENconnectors Command Line Interace - page 98

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-66 2XWS XW The port traffic counter data is displayed as a table that includes the following statistics, along with a wrap count for each corr esponding counter . 2XWSXW([DPS OH The output fr om the perf.traf fic command displays as follows. Port ...

  • McDATA OPENconnectors Command Line Interace - page 99

    CLI Com mands show 2 2-6 7 VKRZ The show branch of the CLI command tr ee contains commands that display , but do not change, stored da ta values. The displayed output that results from these comm ands is no t necessarily id entical wi th the output from the show commands tha t are within the other CLI command tree branches, for exa mple, config.por ...

  • McDATA OPENconnectors Command Line Interace - page 100

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-68 2XWSXW([DPS OH The output fr om the show .eventLog command displays as follows. Date/Ti me C ode Severi ty F RU E vent Data ------- ---- ----- - --- ------ -- - ---- - ----- ---- ------- ----- ------- ----- - 04/12/0 1 1 0:58A 3 75 Major C TP- ...

  • McDATA OPENconnectors Command Line Interace - page 101

    CLI Com mands show 2 2-6 9 VKRZ IUXV 6QW D[ frus 3XUSRV H This command display s informatio n about all FRUs. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show frus 2XWS XW The FR U informatio n is displayed as a ta ble that includes th e following properties. FRU T he FR U n am e. • If a F RU is not in s ...

  • McDATA OPENconnectors Command Line Interace - page 102

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-70 2XWSXW([DPS OH The output fr om the show .frus command displays as follows. FRU Position State Serial Num Part Num Beacon P wr On Hrs ----- -------- ------ ---------- ---- --------- --------- ---------- CTP 0 Active 470-000399-700 1 23456789 O ...

  • McDATA OPENconnectors Command Line Interace - page 103

    CLI Com mands show 2 2-7 1 VKRZ O RJLQ6HUYHU 6QW D[ loginServer 3XUSRV H This command dis plays informa tion from the login server database for devices attach ed to this switch . Note that it is possible to have more than one device per port for any public loop devices attached to an FL Po rt. 3 DUDP HWHUV This co mman d has no par amet ers. &a ...

  • McDATA OPENconnectors Command Line Interace - page 104

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-72 VKRZ QDPH6H UYHU 6QW D[ nameServer 3XUSRV H This command displays information fr om the name server databas e for devices attached to this switch. Note that it is possible to have more than one device per port for any public loop devices atta ...

  • McDATA OPENconnectors Command Line Interace - page 105

    CLI Com mands show 2 2-7 3 2XWSXW([DPS OH The output fr om the show .nameServer command displays as fo llows. Type Port Id Port Name N ode Name COS FC4 Typ es ---- ------- ----------------------- - ---------------------- --- ------- -- N 010400 00:11:22:33:44:55:66:77 2 0:11:22:33:44:55:66:77 2,3 2 N 010500 00:11:22:33:44:55:66:78 2 0:11:22:33:4 ...

  • McDATA OPENconnectors Command Line Interace - page 106

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-74 2XWS XW The de vice information da ta is displayed a s a table that includes th e following properties. 2XWSXW([DPS OH The output fr om the show .nameServerExt command displays as follows. Type, Port Id, Port Name, Node Name, C OS, FC4 Types, ...

  • McDATA OPENconnectors Command Line Interace - page 107

    CLI Com mands show 2 2-7 5 VKRZ  S RUW F RQI LJ 6QW D[ config 3XUSRV H This command shows the port configuration for all ports. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show port config 2XWS XW The port confi guration a ttribu tes ar e dis played as a ta ble that includes the follow ing properties. 2 ...

  • McDATA OPENconnectors Command Line Interace - page 108

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-76 VKRZ  S RUW LQ IR 6QW D[ info 3XUSRV H This command displays port information for all ports. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show port info 2XWS XW The port information data is displayed a ...

  • McDATA OPENconnectors Command Line Interace - page 109

    CLI Com mands show 2 2-7 7 VK RZ SRU WQ RGH V 6QW D[ nodes portNumber 3XUSRV H This command di splays the loo p node list f or a specified port. This command is valid only on the Spher eon 4500. 3 DUDP HWHUV This co mman d ha s one para meter . &RPPD QG ([DPS OH Root> show port nodes portNumber 2XWS XW The port nod es data is displ ...

  • McDATA OPENconnectors Command Line Interace - page 110

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-78 2XWSXW([DPS OH The show .port .nodes c omman d outp ut for a m ix of publi c and private n odes on a loop a ppears as follows: FC Addr Attached WWN Clas s Data Field Size ------- ----------------------- ---- - --------------- 610A01 33:00:00:0 ...

  • McDATA OPENconnectors Command Line Interace - page 111

    CLI Com mands show 2 2-7 9 VKRZ SRUWVWDWXV 6QW D[ status 3XUSRV H This command displays port status for all ports. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show port status 2XWS XW The port status data is dis played as a table that includes the followin g properties. Port The port number . State The ...

  • McDATA OPENconnectors Command Line Interace - page 112

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-80 Reason An optional message number that indicates if the port has a segmented ISL, if a port binding violation has occurred, or if th e port is inactive. The mess age descript ion for this mess age number is provided at the bottom of the table. If ...

  • McDATA OPENconnectors Command Line Interace - page 113

    CLI Com mands show 2 2-8 1 2XWSXW([DPS OH The outpu t fr om t he show .p ort.st atus command di spla ys a s foll ows. Port State Type Atta ched WWN Beaconing Reason ---- ---------------- ----- -------------------- --- --------- ------ 0 Online fPort 10:00:80:00 :11:22:33:44 Off 1 Online gPort 10:00:80:00 :11:22:33:45 On 2 No Light fPort 10:00:80 ...

  • McDATA OPENconnectors Command Line Interace - page 114

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-82 VKRZ S RUWWHFKQRORJ 6QW D[ technology 3XUSRV H This command d isplays port technology in formation f or all ports. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show port technology 2XWS XW The po rt t ...

  • McDATA OPENconnectors Command Line Interace - page 115

    CLI Com mands show 2 2-8 3 VKRZ VHFXULW  IDEULF%LQGLQJ 6QW D[ fabricBinding 3XUSRV H This comm and displa ys the fabri c binding configurati on saved on the fabric. The command performs the same function as config.security .fabricBinding.showActive. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show secu ...

  • McDATA OPENconnectors Command Line Interace - page 116

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-84 VKRZ VHFXULW  SRUW%LQGLQJ 6QW D[ portBinding 3XUSRV H This command sh ows the port bin ding configurati on for all ports. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show security portBinding 2XWS XW ...

  • McDATA OPENconnectors Command Line Interace - page 117

    CLI Com mands show 2 2-8 5 VKRZ VHFXULW  VZLWFK%LQGLQJ 6QW D[ switchBinding 3XUSRV H This command d isplays th e switch binding co nfigurati on. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show security switchBinding 2XWS XW The sw itch binding con figuration da ta is displayed as a ta ble that include ...

  • McDATA OPENconnectors Command Line Interace - page 118

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-86 VKRZ VZLWFK 6QW D[ switch 3XUSRV H This command dis plays switch attributes. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show switch 2XWS XW The switch attri butes data is displayed as a table that inclu ...

  • McDATA OPENconnectors Command Line Interace - page 119

    CLI Com mands show 2 2-8 7 2XWSXW([DPS OH The output fr om the show .switch command displays as follows. Switch Information State: Online BB Credit: 2 R_A_TOV: 20 E_D_TOV: 4 Preferred Domain Id: 1 Switch Priority: Default Speed: 2 Gb/sec Rerouting Delay: Enabled Operating Mode: Open Systems Interop Mode: Open Fabric 1.0 Active Domain Id: 1 World ...

  • McDATA OPENconnectors Command Line Interace - page 120

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-88 VKRZ VVWHP 6QW D[ system 3XUSRV H This comm and displ ays a set of s yste m att rib ute s. 3 DUDP HWHUV This co mman d has no par amet ers. &RPPD QG ([DPS OH Root> show system 2XWS XW The system attributes are displayed as a table ...

  • McDATA OPENconnectors Command Line Interace - page 121

    CLI Com mands show 2 2-8 9 2XWSXW([DPS OH The output from the show .system command displa ys as follows. System Information Name: Joe ’ s Switch Description: McDATA Intrepid 6064 Fibre Channel Director Contact: Joe Location: Everywhere Date/Time: 04/16/2001 10:34:01 AM Serial Number: 123456789 Type Number: 1 Model Number; Intrepid 6064 EC Leve ...

  • McDATA OPENconnectors Command Line Interace - page 122

    2 CLI Co mmands McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -300 2-90 ...

  • McDATA OPENconnectors Command Line Interace - page 123

    Error Messages A-1 $ This appendix lists and explains err or messages for the Command Line Interface (CLI). Any err or numbers that are not listed ar e res erved for future use. The message that is r eturned is a string that includes the err or number and the text of the message. Message Error 05: Busy Des cri pti on The switch is busy pr ocessing ...

  • McDATA OPENconnectors Command Line Interace - page 124

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-2 Message Error 09 : Invalid Switch Descripti on Desc rip tio n The va lue entered for the switch description is invalid. Action The description for the dir ector or switch may contain 0 – 25 5 characters. Enter a description with 0 – 2 55 char ...

  • McDATA OPENconnectors Command Line Interace - page 125

    Error Messages Error M essage s A A-3 Message Error 14: Inv alid Po rt Name Desc rip tio n The value entered for the port name is invalid. Action The port name for the individual port may contain 0 – 24 chara cters. Enter a name with 0 – 24 characters and r e-submit. If spaces are us ed, enclose the name in quotation marks. Message Er ror 15 : ...

  • McDATA OPENconnectors Command Line Interace - page 126

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-4 Message Error 2 0: Inv alid Pr efer red Doma in ID Desc rip tio n The value entered for the pr eferr ed domain ID for the dir ector or switch is inva lid. Action The pre ferred do main ID must be an integer in the range 1 – 31. En ter an app ro ...

  • McDATA OPENconnectors Command Line Interace - page 127

    Error Messages Error M essage s A A-5 Message Er ror 31: Inva lid Subnet Mask Desc rip tio n The va lue entered for the subnet mask is invali d. Action The new subnet mask for the Ethernet interfac e must be entered in dotted decimal format ( e.g. 255.0.0.0). En ter an appr opriate subnet mask a nd re-s ubmit. Message Er ror 32: Invalid SNMP Commun ...

  • McDATA OPENconnectors Command Line Interace - page 128

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-6 Message Error 3 7: Inval id Mon th Desc rip tio n The value of the month entered for the new system date is invalid. Action The format of the date para meter must be mm:dd:yyyy or mm/dd/y yyy . The mont h must con tain an in teg er in the range 1 ...

  • McDATA OPENconnectors Command Line Interace - page 129

    Error Messages Error M essage s A A-7 Message Er ror 42: Inva lid Second Desc rip tio n The value of the second entered for the new system time is invalid. Action The format of the time param eter must be hh:mm:ss. The s econd can contain an integer in th e range 0 – 59. En ter an appr opriate time and re- s u bm i t . Message Er ror 44: Max SNMP ...

  • McDATA OPENconnectors Command Line Interace - page 130

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-8 Message Error 57 : Duplicate Zone Desc rip tio n T wo or more zone names in the zone s et are iden tical. Action All zone name s must be unique. Ma ke the appropriate changes and re- s u bm i t . Message Error 59: Zone Name in Use Desc rip tio n ...

  • McDATA OPENconnectors Command Line Interace - page 131

    Error Messages Error M essage s A A-9 Message Er ror 69: Duplica te Port Name Desc rip tio n T wo or mo r e po rt n ame s ar e ide nti cal. Action Port names must be unique. Make a ppropriate changes an d re-submit. For more information, see config.port.name on page 2-10. Message Error 70: Inv alid F RU T ype Desc rip tio n The specified FRU does n ...

  • McDATA OPENconnectors Command Line Interace - page 132

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-10 Message Error 7 4: Inv alid Number of Zon es Desc rip tio n The specified zone set contains less than one zone or mor e than the maxi mum nu mber of zones allow ed f or th is pr oduct. Action A zone se t must co ntain at leas t one zone to be co ...

  • McDATA OPENconnectors Command Line Interace - page 133

    Error Messages Error M essage s A A-11 Message Error 79: FRU Failed Desc rip tio n The spe cifie d FRU has f ail ed. Action Consult the in stallation/service ma nual for appropriate action . Message Er ror 81: D efault Zo ne Enabled Desc rip tio n The request cannot be comp leted because the default zone is enabled Action Disable the def ault zone ...

  • McDATA OPENconnectors Command Line Interace - page 134

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-12 Message Error 89 : Not All owed in S/390 Mode W ithout the SANteg rity (TM) Featu re Desc rip tio n Ca nnot conf igure port types in S/390 mod e without ins tallin g SANtegrity . Action This command is only supported when the switch is in Open S ...

  • McDATA OPENconnectors Command Line Interace - page 135

    Error Messages Error M essage s A A-13 Message Er ror 94 : Invalid Fe ature Combina tion Desc rip tio n The features re quested cannot be installed at th e same time on one director or switch. Action Contact you r sales repr esentative. Message Er ror 99: Pr eferred D omain ID Cannot Be Zero Desc rip tio n Thi s pr oduct cannot be configured to hav ...

  • McDATA OPENconnectors Command Line Interace - page 136

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-14 Message Error 1 16: Switch Not Capab le of 2 G b/sec Desc rip tio n The request cannot be completed because the switch is not capable of operating at 2 Gbps. Action Consult the insta llation/service manu al to determine the speed capabilities of ...

  • McDATA OPENconnectors Command Line Interace - page 137

    Error Messages Error M essage s A A-15 Message Er ror 134: Inv alid Membership List Desc rip tio n Gen eric message to indicate a problem in either the switch binding or fabric binding mem bership list. Action Be sur e that the membership list submitted does not isolate a switch already in the fabric. If this i s not the case, the user n eeds to be ...

  • McDATA OPENconnectors Command Line Interace - page 138

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-16 Message Error 13 8: Invalid Sw itch Bindi ng State Desc rip tio n The switch binding state submitted is not recognized by the CLI. Action The switch binding state must be set to one of the following: disa ble , erestrict , f restrict , or allr e ...

  • McDATA OPENconnectors Command Line Interace - page 139

    Error Messages Error M essage s A A-17 Message Er ror 142: Inv alid Domain RSCN Stat e Desc rip tio n The request cannot be comple ted because an invalid domain RSCN state has been submitted. Action The domain RSCN state must be set to either enable or disabl e . For more information, see config.swi tch.domainRSC N on page 2 -32. Message Er ror 143 ...

  • McDATA OPENconnectors Command Line Interace - page 140

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-18 Message Error 14 8: Not Al lowed While Swi tch Off line Desc rip tio n The switch must be online to complete this request. Action Change the state of the switch to ONLINE and re-submit the request. Message Error 14 9: Not Allo wed While Enter pr ...

  • McDATA OPENconnectors Command Line Interace - page 141

    Error Messages Error M essage s A A-19 Message Er ror 154: In valid Membership List WWN Desc rip tio n The request ca nnot be completed becau se the WWN does not exis t in the switch bindi ng membership lis t. Action Make sure that the WWN deleted matches the WWN in th e switch membership list. Make appr opriate changes and r e-submit the req u e s ...

  • McDATA OPENconnectors Command Line Interace - page 142

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-20 Message Error 20 2: Invali d Change Autho rization I D Desc rip tio n The sw itch will not accept a change request from this particular client. Action Be sur e all parameters have been enter ed corr ectly and re- submit. Contact your service rep ...

  • McDATA OPENconnectors Command Line Interace - page 143

    Error Messages Error M essage s A A-21 Message Er ror 210: Busy Processing Anothe r Request Desc rip tio n A differen t switch in the Fabric was busy processing another r equest and could not complete the command. Action Be sur e all parameters have been entered correctly and re- submit. Contact your service repr esen tative with continued pro blem ...

  • McDATA OPENconnectors Command Line Interace - page 144

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-22 Message Error 21 5: Zone Set Siz e Excee ded Desc rip tio n The lo cal work area zone set has outg rown the size limitatio ns imposed by the Comm and Line Interfa ce. Action Reduce the size of the zone set to meet CLI requirements. This can be a ...

  • McDATA OPENconnectors Command Line Interace - page 145

    Error Messages Error M essage s A A-23 Message Er ror 223: U nknown Error Desc rip tio n The switch did not accept the r equest Action Contact your service repr esentative. Message Er ror 224: I nvalid Argu ment Desc rip tio n One or more parameters ar e invalid for this command . Action For the appropriate para meters, see the section of the manua ...

  • McDATA OPENconnectors Command Line Interace - page 146

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-24 Message Error 22 8: Invali d W rite A uthorizat ion Argument Desc rip tio n The writeAuthorization parameter does not contain a valid value. Action Parameters must be typed exactl y to specification to be recognized correctly by the CLI. For mor ...

  • McDATA OPENconnectors Command Line Interace - page 147

    Error Messages Error M essage s A A-25 Message Error 233: Inva lid Membe r Desc rip tio n The zone member added i s not val id. Action For the appropriate para meters, see the section of the manual that corresponds to the attempted comman d. Parameters must be typed exactly to specif ication to be recognized correctly by the CLI. Message Error 234: ...

  • McDATA OPENconnectors Command Line Interace - page 148

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-26 Message Error 23 7: Invali d Zoning Dat abase Desc rip tio n There was an unidentifiable problem in the local zone set work ar ea. Action V erify all parameters ar e enter ed corr ectly and re-submit. Otherwise, the pending zone set should be cl ...

  • McDATA OPENconnectors Command Line Interace - page 149

    Error Messages Error M essage s A A-27 Message Er ror 242: Open trunking th reshold % value must be 0 – 99 Desc rip tio n An invalid thre shold per centage ha s been e ntered. Action The Open trunking threshold must be in the range 0 – 99. Make sur e all values ar e valid and r e-submit the re quest. Message Er ror 243: No t allowe d while S/3 ...

  • McDATA OPENconnectors Command Line Interace - page 150

    A Error Messages McDA T A OPENconnecto rs Comman d Line Inter face USER MAN UAL P/N 620-000134 -500 A-28 ...

  • McDATA OPENconnectors Command Line Interace - page 151

    g-1 P/N 620-000134 -500 McDA T A OPENconnectors Comm and Line Inter face USER MAN UAL *ORVVDU The following cross-r efer ences are used in this glossary: Contra st wi th . This ref ers to a term that has an o pposite or substanti vely differ ent meaning. See . This refers th e reader to another keyword or phrase for the same term. See also . This ...

  • McDATA OPENconnectors Command Line Interace - page 152

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Glossa ry g-2 backup FRU When an acti ve FRU fails, a n identical backup FRU takes over operation autom atically (fai lover) to maintain director and Fibre Channel lin k operat ion. beaconing The use of light-emitting diodes on ports, port cards, hardwar e components , ...

  • McDATA OPENconnectors Command Line Interace - page 153

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Glos sary g-3 configuratio n. A configuration backup file is required to restor e configuratio n data if th e CTP card in a n onredundant Intrepid 6064 is remo ved and r eplaced. connectionless Nondedicated link. T ypically used to describe a link between nodes whi ...

  • McDATA OPENconnectors Command Line Interace - page 154

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Glossa ry g-4 dialog box A window containing informational messages or data fields to be modified or f illed in with desir ed options. director An intellig ent, high-avai lability Fibre Channel switching de vice providing any-to -any port connectivity betw een nodes (en ...

  • McDATA OPENconnectors Command Line Interace - page 155

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Glos sary g-5 Ethernet A widely implem ented local area network (LAN) protocol that us es a bus or star topology and serve d as the bas is for the IEEE 802. 3 standard, which specifies the physica l and software layers. Baseband LAN allow s multiple stati on access ...

  • McDATA OPENconnectors Command Line Interace - page 156

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Glossa ry g-6 Fibre Channel Address Ther e ar e tw o types of Fibre Channel addr esses: • An addr ess for a public device, comp rised of the domain ID, port addres s, and it s AL_P A • An addr ess for a private device, comprised of 0000 followed by its AL_P A. In bo ...

  • McDATA OPENconnectors Command Line Interace - page 157

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Glos sary g-7 Gx_Port A port configuration a llowing a port to trans ition operationall y to FL_Port as well as to the port operational states described for a G_Port. Only the Sphe reon 4500 Switch s upports the con figuration of this port type. H hop Data transfer ...

  • McDATA OPENconnectors Command Line Interace - page 158

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Glossa ry g-8 L LIN See link incide nt. link Physical connection between two devices on a switched fabric. link incident Int erruption to link due to loss of light or other causes . LIPS L oop I ni tia liz atio n Pr imit ive s. loopback test T e st that checks attachme ...

  • McDATA OPENconnectors Command Line Interace - page 159

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Glos sary g-9 format xxx.xxx.xxx.xxx), o r a domain name (a s administer ed on a cus tome r netw or k). node In Fibre Cha nnel terminology , node refers to an end device (server or storage device) that is or can be connected to a switched fabric. node port Physical ...

  • McDATA OPENconnectors Command Line Interace - page 160

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Glossa ry g-10 out-of-band management T ransmission of manag ement info rmation using frequencies or channels other tha n those routinely used for informatio n transfer . P password Unique s tring of characters known to the co mputer system and to a user who m ust speci ...

  • McDATA OPENconnectors Command Line Interace - page 161

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Glos sary g-11 operations will a utomatically failover in the event of a co mponent failure. Redundancy is a vital characteristi c of virtually all high-avai lability (24 hr ./7 days per week) computer systems and networks . resource allocation time out v alue R_A_ ...

  • McDATA OPENconnectors Command Line Interace - page 162

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Glossa ry g-12 SNMP community Also known as SNMP communi ty string. SNMP com munity is a cluster of managed products (in SNM P terminology , hosts) to which the server or managed pro duct running the SNMP agent belongs. SNMP community name The name assigned to a given S ...

  • McDATA OPENconnectors Command Line Interace - page 163

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Glos sary g-13 W warning messag e Indication that a possible erro r has been detected. See als o err or messa ge; i nform ation mess age. world wide name Eigh t byte identifier uniquely assigned to a switch or to a no de (end device), even on global networks. WWN S ...

  • McDATA OPENconnectors Command Line Interace - page 164

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Glossa ry g-14 ...

  • McDATA OPENconnectors Command Line Interace - page 165

    P/N 620-000134 -500 McDA T A OPENconnectors Comm and Line Inter face USER MAN UAL i-1 Symbols " 1-10 # 1-16 .. 1-8 ? 1-15 Numerics 60 cha racte rs in hi stor y log 1-9 80-column out put 1-1 0 A acces s rights admin istra tor, s ettin g 2-26 operator, set ting 2-27 relationship to othe r products 1-12 active zoning config uratio n 2-54 adminis ...

  • McDATA OPENconnectors Command Line Interace - page 166

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Inde x i-2 using 1-2 command tree 1-5 limi tati ons on movem ents with in 1-9 navig atio n of 1- 8 commands async hronous 1-3 commaDelim 1-1 3 config 2-2 ED-500 0 1-1 7 login 1-11 logout 1-12 maint 2- 55 perf 2-59 periods in 1-3 show 2-67 commands that take effect immed ...

  • McDATA OPENconnectors Command Line Interace - page 167

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Index i-3 G G_port, setting 2-1 2 gatew ay a ddress 2-6 globally availa ble com mands 1-5 H help co mmand 1-15 help, tech nical s uppor t xi i histo ry l og 1-9 clearing 1-9 I inact ive stat e r eason s 2-80 insisten t Domain ID state Domain ID state 2-3 3 inte rac ...

  • McDATA OPENconnectors Command Line Interace - page 168

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Inde x i-4 deleti ng 2-51 port stati stics , re setting 2-62 port status 2-79 port techn ology inform ation 2- 82 por t tra ff ic coun ters 2-65 ports bbCredit 2-32 error c ounters 2-6 2 extended distan ce state 2-8 link coun ters 2-64 name 2-10 port beaco ning 2-5 5 po ...

  • McDATA OPENconnectors Command Line Interace - page 169

    P/N 620-000 134-500 Mc DA T A OPENconnector s Comm and Line Inter face U SER MANU AL Index i-5 strings , nul l 1-10 strings , quotat ion marks in 1-10 subnet ma sk 2-6 switc h attr ibu tes, disp layi ng 2-86 Switch Bin ding add new member 2-23 conf igurati on 2-23 delete member 2-23 show c onfiguration 2-25 switch b inding 2-85 set s tate 2-24 Swit ...

  • McDATA OPENconnectors Command Line Interace - page 170

    McDA T A OPENconnector s Command Line Inter face USER MANUAL P/N 620-000134-500 Inde x i-6 members adding b y port 2-49 adding by WWN 2-48 deleti ng by port 2-51 deleting by WWN 2-50 renami ng 2-52 zoni ng confi gurati on active , dis play 2-54 displayin g 2-89 pending, d isplay 2-5 3 zoning, co nfigur ing 2-44 ...

Manufacturer McDATA Category Network Card

Documents that we receive from a manufacturer of a McDATA OPENconnectors Command Line Interace can be divided into several groups. They are, among others:
- McDATA technical drawings
- OPENconnectors Command Line Interace manuals
- McDATA product data sheets
- information booklets
- or energy labels McDATA OPENconnectors Command Line Interace
All of them are important, but the most important information from the point of view of use of the device are in the user manual McDATA OPENconnectors Command Line Interace.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals McDATA OPENconnectors Command Line Interace, service manual, brief instructions and user manuals McDATA OPENconnectors Command Line Interace. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product McDATA OPENconnectors Command Line Interace.

Similar manuals

A complete manual for the device McDATA OPENconnectors Command Line Interace, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use McDATA OPENconnectors Command Line Interace by users. Manuals are usually written by a technical writer, but in a language understandable to all users of McDATA OPENconnectors Command Line Interace.

A complete McDATA manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual McDATA OPENconnectors Command Line Interace - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the McDATA OPENconnectors Command Line Interace, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the McDATA OPENconnectors Command Line Interace, that we can find in the current document
3. Tips how to use the basic functions of the device McDATA OPENconnectors Command Line Interace - which should help us in our first steps of using McDATA OPENconnectors Command Line Interace
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with McDATA OPENconnectors Command Line Interace
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of McDATA OPENconnectors Command Line Interace in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning McDATA OPENconnectors Command Line Interace?

Use the form below

If you did not solve your problem by using a manual McDATA OPENconnectors Command Line Interace, ask a question using the form below. If a user had a similar problem with McDATA OPENconnectors Command Line Interace it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)