English dropdown-ico

Manual Silverstone LC14S

16 pages Not applicable
Download

Go to site of 16

Summary
  • Silverstone LC14S - page 1

    ...

  • Silverstone LC14S - page 2

    1 ...

  • Silverstone LC14S - page 3

    2 ...

  • Silverstone LC14S - page 4

    3 ...

  • Silverstone LC14S - page 5

    4 Unscrew four case screws to remove case cover Lösen Sie die vier Schrauben an der hinteren Abdeckung und entfernen Sie diese Dévissez les quatres vis pour retirer le capot du boîtier Desatornille cuatro tornillos de la caja para poder retirar la cubierta Svitare quattro viti del pannello superiore del case per rimuoverlo Unscrew four case scre ...

  • Silverstone LC14S - page 6

    5 Power Supply Installation-Insert power supply into the case, secure with four # 6 -32 x 6 screws Motherboard Installation- Insert included motherboard standoffs into holes on the bottom of the case that will lineup with your motherboard 3 4 Installation des Netzteils - Setzen Sie das Netzteil in das Gehäuse ein und befestigen Sie es mit vier #6- ...

  • Silverstone LC14S - page 7

    6 Place motherboard into the case and secure with M3 screws Remove 3.5” drive bracket located behind the acrylic front panel by unscrewing two screws on top of the bracket 5 6 Setzen Sie ihr Mainboard in das Gehäuse ein und sichern Sie es mit M3 Schrauben Entfernen Sie die 3.5” Halterung hinter der vorderen Acryl-Abdeckung indem Sie die beiden ...

  • Silverstone LC14S - page 8

    7 Prepare your hard drive for installation Use #6-32 x 6 screws to install hard drive into the 3.5” drive bracket, up to three hard drives can be installed 7 8 Bereiten Sie ihre Festplatte für die Installation vor Benutzen Sie #6-32 x 6 Schrauben um ihre Festplatte in der 3.5” Halterung zu befestigen. Es können bis zu drei Festplatten install ...

  • Silverstone LC14S - page 9

    8 After hard drives are installed, place the 3.5” drive bracket back into the case and secure with screws Use hex wrench to remove two hex screws located on top of the right- front panel 9 10 Setzen Sie die 3.5” Halterung wieder in das Gehäuse ein und befestigen Sie diese nachdem Sie die Festplatte in der Halterung installiert haben V erwenden ...

  • Silverstone LC14S - page 10

    9 Remove right-front panel slowly and carefully as indicated in the photo Insert optical drive into the top slot of the 5.25” drive bay 11 12 Entfernen Sie die rechte Front-Abdeckung langsam und vorsichtig wie auf der Abbildung gezeigt Setzen Sie das optischen Laufwerk in den oberen Einschub der 5.25” Halterung ein Saque con cuidado y lentament ...

  • Silverstone LC14S - page 11

    10 Insert the second optical drive or other 5.25” drive bay device intothe bottom slot Secure both 5.25” drives or devices with screws 13 14 Setzen Sie das zweite optische Laufwerk oder ein anderes 5.25” Laufwerk in den unteren Einschub ein Befestigen Sie beide 5.25” Laufwerke mit Schrauben Inserte la segunda unidad óptica u otro dispositi ...

  • Silverstone LC14S - page 12

    11 When reinstalling right-front panel back onto the case, make sure the push-pin on the panel is aligned with the catch in the case. Secure the right-front panel with hex screws 15 16 Achten Sie beim Einsetzen der rechten Front-Abdeckung darauf das der Push-Pin richtig ausgerichtet ist. Befestigen Sie die rechte Front-Abdeckung mit Sechskant-Schra ...

  • Silverstone LC14S - page 13

    12 A second 3.5” drive bracket is located beneath the 5.25” drive bays with room for one more hard drive. It can be taken out of the case easily with a screw removed After installing hard drive into the bracket, slide it back underneath the 5.25” drive bays 17 18 Unter der 5.25” Halterung befindet sich eine zusätzliche 3.5” Halterung, di ...

  • Silverstone LC14S - page 14

    13 Secure reinstalled bracket with screw For extra EMI protection, route front panel cables through the included wire ring 19 20 21 Schrauben Sie die Halterung wieder fest Führen Sie die Kabel der Front-Abdeckung durch den Kabelring um eine besseren Schutz vor elektromagnetischen Wellen zu erhalten Asegure el bracket con el tornillo Para una prote ...

  • Silverstone LC14S - page 15

    14 Insert the connector from the hotkey module into a USB pin header on your motherboard (please refer to your motherboard manual for connection information, the side with the black wire is the ground connection) 22 Schließen Sie den Stecker mit der Aufschrift “HOTKEY” an einen USB Anschluß auf dem Mainboard an (bitte entnehmen Sie die Inform ...

  • Silverstone LC14S - page 16

    May , 2008 ...

Manufacturer Silverstone Category Computer case

Documents that we receive from a manufacturer of a Silverstone LC14S can be divided into several groups. They are, among others:
- Silverstone technical drawings
- LC14S manuals
- Silverstone product data sheets
- information booklets
- or energy labels Silverstone LC14S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Silverstone LC14S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Silverstone LC14S, service manual, brief instructions and user manuals Silverstone LC14S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Silverstone LC14S.

Similar manuals

A complete manual for the device Silverstone LC14S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Silverstone LC14S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Silverstone LC14S.

A complete Silverstone manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Silverstone LC14S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Silverstone LC14S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Silverstone LC14S, that we can find in the current document
3. Tips how to use the basic functions of the device Silverstone LC14S - which should help us in our first steps of using Silverstone LC14S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Silverstone LC14S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Silverstone LC14S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Silverstone LC14S?

Use the form below

If you did not solve your problem by using a manual Silverstone LC14S, ask a question using the form below. If a user had a similar problem with Silverstone LC14S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)