English dropdown-ico

Manual Hand Held Products Hand Held Computer Dolphin 7450

95 pages 1.22 mb
Download

Go to site of 95

Summary
  • Hand Held Products Hand Held Computer Dolphin 7450 - page 1

    ™ Dolphin® 7400/7450 Hand Held Computer User’s Guide ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 2

    2 Patents The Dolphin 7400 mobile computer is cove red by the following U.S Patent: D439,898 S. The IMAGETEAM 4250 image engine is covered by one or more of the following U.S. Patent s: 3,991,299; 4,570, 057; 5,021,642; 5,038,024; 5,081,343; 5,095,197; 5,144,1 19; 5,144,121; 5,182,441; 5,187,355; 5,187,356; 5,218,191; 5,233,172; 5,258,606; 5,286,96 ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 3

    iii Chapter 1 - Introduction Additional Featur es ....................................................................................................................... 1-1 Required Safety Labe ls ........................................................................................................................ 1-2 If Your Dolphin 7400/7450 h ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 4

    iv Communication ................................................................................................................................... 3-7 Micro-DB9 RS-232 Port .......................................................................................................... ..... 3-7 IrDA Port ................................................ ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 5

    v Powering the Dolphin Terminal .................................................................................................. ........ 6-7 Charging Additional Battery Packs in the IntelliBase+ ................................................................ 6-8 Deep-Cycling Batterie s ........................................................... ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 6

    vi Using the Modifier Keys ................................................................................................................... 11-2 43-Key Alpha/Numeric Ke yboard.................................................................................................. ... 11-2 Key Combinations................................................ ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 7

    1 - 1 1 Introduc tion Congratulations on the purchase of your new Dolphin 7400/7450 hand held computer. You have made a wise choice in selecting the Dolphin, a device known worldwide for its ergonomic sha pe, light weight and single-han ded data collection features. The patented shape of the Dolphin 7400 allows true, one -handed operation and fits ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 8

    1 - 2 Required Safety Labels The Dolphin 7400/7450 hand held computer meets or exceeds the requirements of a ll applicable standards organizations for safe operation. However, as with any electr ical equipment, the best way to ensure safe operation is to know the possible risks. The following safety guidelines are designed to protect both you and o ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 9

    1 - 3 If Y our Dolphin 7400/7450 has a Radio The Dolphin 7400/7450 RF terminal is design ed to comply with the most current applicab le standards on safe levels of RF energy developed by the Institute of Electrical and Electronics Engineers (IEEE) and the Amer ican National Standards Institute (ANSI) and has been recommended for adoption by the Fed ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 10

    1 - 4 FCC Compliance Dolphin 7400/7450 Batch T erminal The Dolphin 7400/7450 Batch comp lies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. Devices may not cause harmful interference. 2. Devices must accept any interferen ce received, including interference that may cause undesired operation. Dolphin 7400/74 ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 11

    1 - 5 Regulatory and Safety Agency Approvals The CE mark on the product indi cates that the system has been tested to and conf orms with the provisions noted within the 89/ 336/EEC Electromagnetic Compatibility Direct ive and the 73/23/EEC Low Voltage Directive. P arameter Specification U. S. A . Canada Europe Me xico Others FCC P ar t 15, Class B ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 12

    1 - 6 Dolphin 7400/7450 RF Cisco 352 R&TTE Compliance S t atement The Hand Held Products Dolphin 7400RF and Dolphin 7450RF are in conformity wi th all essential requirements of the R&TTE Directive (1999/5/EC). This equipment ha s been assessed to the following standards: This product is marked with in accordance with the Class II product re ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 13

    1 - 7 Pacemakers, Hearing Aids and Other Electrically Powered Devices Most manufacturers of medical de vices adhere to the IEC 601-1-2 standard. This standard requires devi ces to operate properly in an EM Field with a strength of 3V/m over a frequency ran ge of 26 to 1000MHz. The maximum allowable field strength emitted by the Dolphin is 0.3V/m ac ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 14

    1 - 8 ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 15

    2 - 1 2 Getting Star ted The Dolphin 7400/7450 is a hand held comp uter/imager designed for easy, single-handed data colle ction. The terminal is equipped with a StrongARM 206MHz RISC processor built to run the Windows CE operating system. Dolphin 7400/7450 terminals are av ailable with different types of 2D imagers, wireless radios, and memory con ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 16

    2 - 2 Image Engine Options Dolphin 7400/7450 terminals may be equipped with one of th ree image engines options: • LX: red or green aimer option scans from 2.0 to 15.0 in. (5.1 to 38.1 cm.) • LR: red or green aimer option scans from 1.9 to 9.4 in. (4.8 to 23.9 cm.) • HD: red or green aimer option scans fr om 1.6 to 3.9 in. (4.1 to 9.9 cm.) Ba ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 17

    2 - 3 2 Charging the Main Battery and Backup Battery W ARNING Use only 2700 mAh NiMH batter y packs pro vided by HHP . The use of any other battery pack in the Dolphin ter minal will vo id y our w arranty and ma y result in damage to the Dolphin terminal or batter y . W ARNING Although the Dolphin 7400 /7450 ter minal is receiv ed with the battery ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 18

    2 - 4 1. Install the charged battery pack in the Dolphin. 2 . T h e r e d L E D w i l l c o m e o n a n d t h e g r e e n L E D w i l l b l i n k f o r a p p r o x i m a t e l y t h r e e s e c o n d s . DO NOT PRESS ANY KEYS WHILE THE TERMINAL IS BOOTING UP. 3. The terminal will initialize and after a few seconds will display the splash screen sho ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 19

    2 - 5 • The stylus should be oriented at a 90 degree angle to the screen surface. Press the stylus firmly into the center of the cro ss- hair target and release. Do not "double-tap" the target. You wi ll be prompted to repeat this pr ocess for a total of five target s. Press the <ENTER> key when complete in or der to save the new ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 20

    2 - 6 Setting the Date/T ime Use the Windows CE Date/Time function to set the correct date and time for your Do lphin 7400/7450 termin al. Use the Dolphin 7400/7450 mouse utility to navigate through the screens if yo ur terminal does not have a touc hscreen. For more information about the mouse utility, see Navigating the Keyboard in Chapter 4. Not ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 21

    2 - 7 Setting Up Communications with Detectoid™ The Detectoid Communication Utility makes it easier to set- up communications between your PC and Dolphin 7300, 7400 or 7450 terminal. The utility has tw o components: DetectoidPC for setting up Active Sync on the PC and DetectoidCE for setting communication parameters on the Dolphin terminal. Insta ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 22

    2 - 8 Click OK to continue using Detectoi dPC to set up communication settings. On starting, DetectoidPC will check for the availability of COM ports, as well as IrDA /USB support. Once the terminal is detect ed, the port status will change from Idle to Li stening as shown in the screen shot above. ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 23

    2 - 9 DetectoidCE After running DetectoidPC, start Detectoid CE on the Dolphin terminal selecting Start>Programs>HHP>DetectoidCE. DetectoidCE will attempt to find the conne ction with the PC. If successful, the di scovered settings will be saved and the Communications Properties Launch window shown below will then display on your Dolphin. ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 24

    2 - 10 Follow these steps to establish a connection fo r the first time after configuring the settings: 1. Select Launch ActiveSync in the DetectoidPC window. 2. Start ActiveSync on the Dolphin terminal. Once parameters are configur ed and saved, you do not need to run Detect oidPC again unless yo u need to change the ActiveSync settings or cold-bo ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 25

    2 - 11 1. Select IMAGE DEMO. 2. Press the <ON/SCAN> button and the image you take will appear on t he terminal’s screen. 3. Touch <ESCAPE> to go back to the main menu. To scan a bar code label: 1. Select SCAN DEMO. 2. Press the <ON/SCAN> button, aim the terminal at a bar code and the red SCAN LED will il luminate. The green SCAN ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 26

    2 - 12 ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 27

    3 - 1 3 Dolphin 7400/7450 Over view System Features Processor The Dolphin 7400/7450 terminal is equip ped with a StrongARM 206MHz RISC micropro cessor that runs on a 100 MHz BUS and is the most powerful Windows CE platform on the market. Operating System Microsoft Windows CE is a compact, highl y efficient, scalable operating system whos e open arc ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 28

    3 - 2 Front Panel Features This section describes features on the Dolphin 7400/7450 te rminal front panel. LEDs The red light emitting diode (LED) located at the upper right corner of the LCD di splay is SCAN LED. This LED illuminates when the user presses the ON/SCAN ke y and activates the scan engine. The green LED located at the upper left corne ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 29

    3 - 3 ON/SCAN Key The ON/SCAN key is centrally located for easy use with the right or the left hand. On the 7450 terminal, the ON/SCAN key operates as an On or system wakeup control; scanning is activated wi th the handle trigger. Cursor Keys The centrally located cursor keys allow full Windows® navigation. Audio Signals The Dolphin 7400/7450 term ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 30

    3 - 4 Back Panel Features This section describes features on the back panels of the Dolphin 7400 and Dolphin 7450 terminals. Dolphin 7400 All versions of the 7400 terminal have sim ilar back panels except for the safety labels specific to how the terminal is equippe d. Image Engine Dolphin 7400/7450 terminals are equipped with an image engine t hat ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 31

    3 - 5 Laser Engine Dolphin 7400/7450 terminals are also ava ilable with an optional Ad vanced Long Range (ALR) laser scanner for long range scanning applications pr evalent in warehousing and distribution centers. A clear window with anti-reflective, scratc h-proof coating covers the image/laser engine to protect it from dust and dirt. Battery W el ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 32

    3 - 6 Dolphin 7450 The bottom cover of the Dolphin 7450 terminal is similar to the Dolphin 7400 as desc ribed in the previous section with the following exceptions: the pistol-grip handle with imager/scanner trigger and the rubber bumpers. All versions of the 7450 termi nal have similar bottom covers except for the safety labels specific to how the ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 33

    3 - 7 Rubber Nose Bumpers Rubber bumpers allow the Dolphin 7450 to rest in a stable, nose- down position when the unit is set on a flat surface by the use r. Scan T rigger The scan trigger provides comfortable two-finger scan activation. Pistol Grip Handle The comfortable, ergonomic hand le is designed especially for use in rapid, high volume sca n ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 34

    3 - 8 Power 5 VDC Port This port connects the Dolphin 7400/7450 to DC power for powe ring peripheral devi ces and charging t he main and backup batteries. Power is fed through the RS-232 communications port. Batteries CAUTION: Use only the 3.6V battery packs provided by HHP . The use of any other battery pack in the Dolphin 7400 terminal will void ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 35

    3 - 9 If the main battery is low and th e terminal is in sleep mode, pressing the ON/SCA N button or the scan trigger will not wake up the Dolphin 7400/7450 terminal; you must replace the discharged battery with a fully charged battery. Setting Critical and Low Battery Points The Dolphin 7400/7450 may be progr ammed to display warnings when the bat ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 36

    3 - 10 Servicing the Battery Pack For maximum battery life, yo u must service, or deep cycle, th e battery twice before initial use. It is also recommended that yo u service the battery once per mont h. To deep cycle, insert the battery into the au xiliary well of the Dolphin Intellibase+ charg ing/ communication cradle, Dolphin QuadCharger or use ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 37

    4 - 1 4 Using the Dolphin 7400/7450 Entering Data Data can be entered into the Dolphin 7400/7450 through a variety of ways, including the optional touchscreen, keyboard, image engine, laser scanner, via radio or the optional modem (7400 only). V ia the T ouch Screen If so equipped, you can use the Dolphin 7400/7450 terminal’s touch screen to oper ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 38

    4 - 2 Reading A Bar code 1. Press the ON/SCAN button on the 7400 or the Scan Trigger on the 7450 to project the sc anner’s bright red or green aim- ing beam. The aiming beam should be orient ed in line with the bar code to achiev e the quickest read. A range of 4-10 inches (10-25 cm) is recommended. 2. Center the aiming beam over the bar code. Th ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 39

    4 - 3 1. To aim, point the display end of the 7400 horizontally at a 45° angle approximately 2 to 9 inches (5 to 20 cm) away from the target. You may have to adjust the angle at which you hold the Dolphin if there is glare on the screen. 2. Press the ON/SCAN button to take an image. Use the live video image on the terminal screen as a guide for po ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 40

    4 - 4 Keyboards Using the Special Keys The Dolphin 7400 and 7450 keyboards have special keys and key combinations that you use to type characters or perform functions. See the chart in Appendix A for key combinations for keyboard functions and special characters that use these keys. Dolphin 7400/7450 43-Key Front View ON/Scan Key Escape Key Enter K ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 41

    4 - 5 Using the Cursor Keys Use the cursor keys to navigate around on an application screen. The use of these keys can vary depending on the application. T o Use This Cursor K ey Press Description Arrow up Mov es cursor up one row or line. Arrow do wn Mov es cursor do wn one row or line . Arrow right Mov es cursor one character to the right. Arrow ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 42

    4 - 6 Using the Modifier Keys All three versions of the Dolphin 7400/7450 keyboard feature the stand ard PC keyboard modifier keys, Alt , Ctl and Shift . For single-handed operation, the Shift key only modifies the next key pr essed; it must be pressed and released before each key you wish to modify. Functions of the Alt and Ctl keys are dependent ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 43

    4 - 7 Key Combinations There are some keyboard functions and spec ial characters not defined on the Dolphi n 7400 and 7450 keyboards. See the charts in Appendix A for the key combinations used to access these f unctions and special characters on your terminal. Navigating the Keyboard The Dolphin 7400/7450 terminals ha ve a mouse utility to simplify ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 44

    4 - 8 Using the Modem If your Dolphin 7400 is equipped wi th the optional integrated modem, you can allow communications via an analog phone line for dial-up applications. A phone jack is built into the back of the Dolphin 7400. The optional integrated modem is not availab le on the Dolphin 7450 terminal. CAUTION: Only connect the modem to an analo ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 45

    5 - 1 5 Dolphin 7400/7450 RF T erminal The Dolphin 7400 and 7450 RF terminals integr ate the basic functionality of the Batch terminal with a radio frequency interface that allows the terminal to communicate with a host computer via a wireless local area network (WLAN). Dolphin 7400/7450 terminals have o ne Type II PCMCIA card slot to allow for an ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 46

    5 - 2 Configuring The Dolphin 7400/7450 RF T erminal When you cold-boot the Dolphin 7400/7450 RF terminal, th e red LED comes on and the green LED blinks, and after approximately 3 seconds, the welcom e screen shown below will appear. Press <Enter> and you will be prompted to calibrate the screen and set the time and da te. Refer to the secti ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 47

    5 - 3 Configuring the Cisco DSSS WLAN Radio The Aironet Client Utility (ACU) enables yo u to change the configuration parameters of the Cisco DSSS WLAN radio. Exit the HHP demo screen. Go to Start > Programs > Cisco>Client Utility . Double-tap the Client Utility (ACU) icon and the screen shown below displays. The five tabs along the top of ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 48

    5 - 4 T o Configure the Radio Car d 1. Select a profile on the Profiles screen and tap the Edit button, the Properties screen displays, as shown below. The Property box lists the configuration parameters th at can be changed and the Value box contains the highlighted parameter’s current value. The Value box can appear as a drop-down menu with sev ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 49

    5 - 5 Customizing the ActiveSync Remote Icon The following section can be added to the /IPSM/AutoRun.ini file: [Spectrum24] ActivesyncRemote=0 The ActiveSync Remote flag will suppress th e ActiveSync Remote desktop icon when se t to zero. A cold boot is required after modifying AutoRun.ini. Host Connectivity HHP offers several host connectivity opt ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 50

    5 - 6 ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 51

    6 - 1 6 Dolphin Charging/Communication Cr adles Hub of the System As the hub of your Dolphin system, Do lphin Charging/Communication cradles perf orm three important functions – power conditioning, communications and stora ge. Four versions of the charging/ communications cradle are available: • HomeBase for communicating with PC-based equipmen ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 52

    6 - 2 Dolphin Charging/Communication Cradle Parts & Functions Front Panel HomeBase/IntelliBase/USB HomeBase Dolphin Terminal Well Place the Dolphin in this well to communicate with a host device and to charge the Dolphin’s battery. LEDs There are two LEDs on the front panel of the HomeBase/IntelliBase/USB HomeBase. Dock LED Turns solid green ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 53

    6 - 3 IntelliBase+ Dolphin Terminal Well Place the Dolphin in this well to communicate with a host device and to charge the Dolphin’s battery. LEDs There are three LEDs on the fr ont panel of the IntelliBase+. Dock LED Turns solid green when the Dolphin Terminal is properly seated into the Dolphin HomeBase. AUX Battery Indicates charging/calibrat ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 54

    6 - 4 Back Panel HomeBase/IntelliBase There is a 5V DC power supply c onnector and an RS-232 connector: Power supply connector Use this connector to attach a power supply to the HomeBase. The powe r supply provides 5V DC input for communications and battery charging. RS-232 Communications Port Use a standard serial cable to connect this port to a h ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 55

    6 - 5 IntelliBase+ Power supply connector Use this connector to attach a power supply to the HomeBase. The powe r supply provides 5V DC input for communications and battery charging. RS-232 Communications Port Use a standard serial cable to connect this port to a host RS-232 device. Auxiliary Battery Well Insert a battery into the well to charge or ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 56

    6 - 6 USB HomeBase There is a 5V DC power supply connector and a USB connector: Power supply connector Use this connector to attach a power supply to the HomeBase. The powe r supply provides 5V DC input for communications and battery charging. USB Communications Port Use a USB full-speed detachable cable to connect this downstream device port to an ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 57

    6 - 7 Bottom View of HomeBase/IntelliBase/IntelliBase+ HomeBase Switch Settings IntelliBase/IntelliBase+ Switch Settings Powering the Dolphin T erminal Dolphin charging/communication cradl es provide power to the intelligent battery charging system incorporated into Dolphin terminals. This charging method protects the battery from be ing damaged by ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 58

    6 - 8 1. Insert a battery pack into the Dolphin terminal. 2. Place the terminal, imager/laser engi ne window up and the LCD visible, in the terminal well of the cradle. 3. Let it glide down into th e well until it stops. 4. Once the Dolphin terminal is prope rly seated, the Dock LED on the front of the cradle will be solid GREEN. Charging Additiona ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 59

    6 - 9 The HomeBase/IntelliBase Communica tion Port is configured as a DCE device. To communicate wi th a DTE device such as a computer, use a standard (or straight-through) RS-232 cable. To communicate with a DCE device, use either a null modem adapter in line with a standard RS-232 cable, or a null-modem serial cable. You can make your own cables ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 60

    6 - 10 Configuring the Dolphin T erminal for Communications The Dolphin terminal may be conf igured for communications usi ng the Detectoid Communication Ut ility as described in Chapter 2 or manually as described below. To set Communications Properties: 1. Select Start>Settings>Control Pane l>Communications Properties . 2. Select the PC C ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 61

    6 - 11 5. On the Dolphin 7400/7450 deskt op, double-tap on ActiveSync. 6. In the ActiveSync connection settings, ad d check mark to "Allow serial cable or infrared connection to this COM port" and select "Infrared Port (IR)" for the COM port as shown below. Change Connection Screen ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 62

    6 - 12 To configure the Dolphin 7400/7450 terminal for communications, see the previous section on Configuring the Dolphin Terminal . Setting Up For Communications W ith The USB HomeBase To use the USB HomeBase, you need the following equipment: • USB HomeBase with power supply •U S B C a b l e • CD with USB-IrDA drivers • Windows 98, Windo ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 63

    6 - 13 In the "Locate Drive Files" dialog, check the CD-ROM drives c heck box and insert the driver CD provided into the CD tray on your PC. There are sub-directories in this directory for each type of Windows OS supported. Select stirusb.sys file in the corr ect sub-directory for your PC: • w2k - Windows 2000 • win98 - Windows 98 • ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 64

    6 - 14 To configure the Dolphin 7400/7450 terminal for communications, see the previous section on Configuring the Dolphin Terminal . Communicating with the Dolphin T erminal To communicate with the Dolphin and any other devices connected to the Dolphin Char ging/Communication cradle: 1. Insert the Dolphin into the terminal well of the HomeBase/Int ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 65

    6 - 15 Mounting the HomeBase/IntelliBase/USB HomeBase The HomeBase, IntelliBase, and USB HomeBase may be desk or wall-mounted for convenience an d storage. The IntelliBase+ may be desk-mounted as long as room is allowed for accessibility to the auxiliary battery well. Desk Mounting: Dolphin charging/communication cradl es have a DIN rail (7.5 X 35 ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 66

    6 - 16 When using right-angle style RS-232 connector cable, the DIN rails may be mounted directly to the wall. When using standard RS-232 connector cables, it is recommended that the rails be mounted to the wall us ing a 25mm (1 in.) spacer to allow for appropriate strain relief of the cables. In either case, after wall mounting, it is recommended ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 67

    7 - 1 7 Dolphin QuadChar ger The Dolphin QuadCharger pr ovides intelligent battery management for NiMH (Nickel Metal Hydride) Dolphin 7400/7450 battery packs. This device fully charges as many as four NiMH batteries in 2.5 hours. Charging sl ots work independently to control charging and discharging of individual ba ttery packs. The QuadCharger is ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 68

    7 - 2 Rear Panel Power Supply Connector Use this connector to attach the power su pply to the QuadCharger. The universal power supply accepts input voltages between 90-265 volts. Communications Port The communications port is for factory us e only in programming the QuadCharger. Charging Batteries In The QuadCharger Follow these steps to charge bat ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 69

    7 - 3 LEDs The LEDs indicate the charging st atus of batteries as described in the chart shown on the next page: To remove a battery pack, push the locking tab down and pull the battery ou t from the charging pocket with a hinging motion. Servicing The Battery Pack To service battery packs, insert batteries into the charging pockets and press the C ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 70

    7 - 4 T roubleshooting If you encounter problems with your Dolphin QuadCharger, refer to chart below for possi ble solutions. If problems persist, plea se contact HHP Technical Support. Problem Issue The “charging” LED does not come on when I insert a battery pack into the Dolphin QuadCharger Check the power connections on the Dolphin QuadCharg ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 71

    8 - 1 8 Dolphin Mobile Charging/Communication Cr adles As the hub of Dolphin mobile data collection systems, Dolphin Mobile Charging/ Communication cradles perform three important functions – power conditioning, communicati ons and storage. Two versi ons of the mobile chargi ng/communication cradles are available: Dolphin Mobile IntelliBase™ fo ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 72

    8 - 2 Mobile IntelliBase and Mobile Base Parts and Functions Front Panel The front panel of the Mobile IntelliB ase and the Mobile Base has one slot: Front Panel of Dolphin Mobile IntelliBase Terminal Well DOCK LED COMM LED Spring-Arm Assembly ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 73

    8 - 3 Dolphin Terminal Well Place the Dolphin in the well to communicate with a host device and/or to charge the Dolphin’s battery. LEDs There are two LEDs on the front panel s of the Mobile IntelliBase and Mobile Base charging/communication cradles. Dock LED Turns solid green when the Dolp hin terminal is properly seated in to the Dolphin Mobile ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 74

    8 - 4 Rear Panel Rear Panel of Dolphi n Mobile IntelliBase RS-232 Communications Port Power Supply Connector Mounting Bracket ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 75

    8 - 5 The power supply connector an d RS-232 connector are located on the back panel of the unit: Power supply connector Use this connector to attach a power supply to the charging/communications cradle. The power supply provides power for comm unications and battery charging. RS-232 communications port Use a standard serial cable to conn ect this ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 76

    8 - 6 Bottom Panel of Mobile IntelliBase/Mobile Base A four-position Baud Rate switch, located on the bottom of the Mobile Inte lliBase, is used to select the communication baud rat e. Switch positions and the co rresponding baud rates are s hown in the chart below. Baud Rate Table For Connecting To PCs Baud Rate Table For Connecting To Modems Powe ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 77

    8 - 7 Setting Up For Communications with the Mobile IntelliBase/Mobile Base The Mobile IntelliBase RS-232 interface al lows the Dolphin terminal to communicate to a personal computer, modem, or any standard RS-232 device using a standard serial cable and communications software. The IrDA 1.0 software stack is integrated into the Mobile IntelliBase/ ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 78

    8 - 8 Installing The Dolphin Mobile Base The Mobile Base has two mounting options - a clamp style for in-premise applicati ons and a standard RAM mount for other mobile applications that allow the Mobile Base to be mounted according to specific needs. The spring-arm assembly holds the terminal securely in place. To attach the bracket: 1. Loosen the ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 79

    8 - 9 Connecting the Cables Connect the Mobile IntelliB ase/Mobile Base to the host comput er or other device by plugging an RS-232 serial cable into the RS- 232 Communications Port on the rear of the cradle. Plug the other end of the RS-232 se rial cable into the correct port on the h ost RS-232 device. The wiring of your cable depends on whether ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 80

    8 - 10 Configuring the Dolphin T erminal The Communications Properties must be conf igured on Dolphin 7400/7450 term inal in order for it to co mmunicate with the Mobile IntelliBase/Mobile Base. To set Communications Properties: 1. Select Start>Settings>Control Pa nel>Communication Settings . 2. Select the PC Connection tab. 3. Select the ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 81

    9 - 1 9 Dev eloping Applic ations Applications for the Dolphin 7400/7450 hand held computer ar e developed for the Microsoft Windows CE environment. Microsoft Windows CE is a compact, highly efficient, scalable operating system created for embedded systems and products. Its modular design allows developers flexibility to customize it for a variety ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 82

    9 - 2 ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 83

    10 - 1 10 W arranty , Suppor t and Ser vice Limited W arranty Hand Held Products, Inc., d/b/a HHP ("HHP") warrants its products to be free from de fects in materials and workmanship and to conform to HHP’s published specifications applicable to the products purchased at the time of shipment. This warranty does not cover any HHP product ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 84

    10 - 2 Return Information If you purchased the product from an Authoriz ed HHP Reseller, contact the Reseller with the unit's serial number. Your Reseller will contact Hand Held, on your behalf, to arrange for the unit to be serviced. If you purchased the product direct ly from Hand Held, or have been instructed by your Reseller to contac t HH ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 85

    10 - 3 T echnical Assistance If you have a question or problem with your unit, you can obtain technical assistance from HHP’s Technica l Support department. North America/Canada: Telephone: (800) 782-42 63, Option 4 (8 a.m. to 6 p.m. EST) Fax number: (315) 685-4960 E-mail: support@HHP.com Europe, Middle East, and Africa: Telephone European Ofc: + ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 86

    10 - 4 ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 87

    11 - 1 11 Appendix A Use the keyboard shortcuts in the chart below to nav igate the Dolphin 7400 and 7450 terminal keyboards. Windows K eyboar d Shortcuts Press T o CTRL + C Cop y CTRL + X Cut CTRL + V P aste CTRL + Z Undo DELETE Delete CTRL + RIGHT ARRO W Mov e the inser tion point to the beginning of the ne xt word. CTRL + LEFT ARRO W Mov e the i ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 88

    11 - 2 Using the Modifier Keys The Dolphin 7400/7450 terminal keyboard features the standard Windows modifier keys, Alt , Ctrl and Shift . The Shift key only modifies the next key pressed; it must be pressed before each key you wish to make lower case. For multiple lower case characters, hold the Shift key down with one hand while typing with the o ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 89

    11 - 3 * Exit the mouse utility prio r to adjusting the contrast. Key Combinations Use the key combinations listed below to ac cess certain keyboard functions or to use special characters that are not defined on the 43-key version of the Dolphin 7400/7450 keyboard. Red ke y + T F4 Red ke y + U F5 Red ke y + V F6 Red ke y + W F7 Red ke y + X F8 Red ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 90

    11 - 4 35 Key Numeric/Alpha Ke y Combinations Us ing Blue & SFT Keys Ke y/Key Combinations Function/Special Characters Blue + SFT + T ? Blue + SFT + X | Miscellaneous Ke y Combinations Ke y/Key Combinations Function/Special Characters NUM + AL T + 3 + 9* ‘ NUM + AL T + 3 + 4* *Hold the AL T key down as y ou type in the n umbers . “ Blue Ke ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 91

    11 - 5 Key Combinations Use the key combinations listed below to ac cess certain keyboard functions or to use special characters that are not defined on the 35-key version of the Dolphin keyboard. 56 Key Full Alpha Numeric Ke y Combinations Using ALPHA & SFT Keys Ke y/Key Combination Function/Special Character ALPHA + SFT + 1 ! ALPHA + SFT + 2 ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 92

    11 - 6 Blue ke y + , - Blue ke y + A ; Blue ke y + B : Blue ke y + C / Blue ke y + D Blue ke y + E _ Blue ke y + F @ Red Ke y Functions & Characters f or 56-Key Full Alpha Numeric Ke yboard Ke y Combination Function/Special Character Red ke y + ESC Lightens Contrast* Red ke y + T AB Darkens Contrast* Red ke y + SFT T oggles on Caps Lock Red k ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 93

    11 - 7 * Exit the mouse utility prio r to adjusting the contrast. Key Combinations Use the key combinations listed below to ac cess certain keyboard functions or to use special characters that are not defined on the 56-key version of the Dolphin keyboard. Red ke y + P F16 Red ke y + Q F17 Red ke y + R F18 Red ke y + S F19 Red ke y + T F20 Red ke y ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 94

    11 - 8 Miscellaneous Ke y Combinations Ke y/Key Combinations Function/Special Characters AL T + 3 + 9* ‘ AL T + 3 + 4* *Hold the AL T key down as y ou type in the n umbers . “ ...

  • Hand Held Products Hand Held Computer Dolphin 7450 - page 95

    ™ HHP, Inc. 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 7400/UG Rev O ...

Manufacturer Hand Held Products Category Laptop

Documents that we receive from a manufacturer of a Hand Held Products Hand Held Computer Dolphin 7450 can be divided into several groups. They are, among others:
- Hand Held Products technical drawings
- Hand Held Computer Dolphin 7450 manuals
- Hand Held Products product data sheets
- information booklets
- or energy labels Hand Held Products Hand Held Computer Dolphin 7450
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hand Held Products Hand Held Computer Dolphin 7450.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hand Held Products Hand Held Computer Dolphin 7450, service manual, brief instructions and user manuals Hand Held Products Hand Held Computer Dolphin 7450. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hand Held Products Hand Held Computer Dolphin 7450.

Similar manuals

A complete manual for the device Hand Held Products Hand Held Computer Dolphin 7450, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hand Held Products Hand Held Computer Dolphin 7450 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hand Held Products Hand Held Computer Dolphin 7450.

A complete Hand Held Products manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hand Held Products Hand Held Computer Dolphin 7450 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hand Held Products Hand Held Computer Dolphin 7450, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hand Held Products Hand Held Computer Dolphin 7450, that we can find in the current document
3. Tips how to use the basic functions of the device Hand Held Products Hand Held Computer Dolphin 7450 - which should help us in our first steps of using Hand Held Products Hand Held Computer Dolphin 7450
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hand Held Products Hand Held Computer Dolphin 7450
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hand Held Products Hand Held Computer Dolphin 7450 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hand Held Products Hand Held Computer Dolphin 7450?

Use the form below

If you did not solve your problem by using a manual Hand Held Products Hand Held Computer Dolphin 7450, ask a question using the form below. If a user had a similar problem with Hand Held Products Hand Held Computer Dolphin 7450 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)