English dropdown-ico

Manual Nilfisk-ALTO S-8

22 pages 1.37 mb
Download

Go to site of 22

Summary
  • Nilfisk-ALTO S-8 - page 1

    User's Manual LTO R www .altoproaudio.com V ersion 2.0 Dec. 2002 English 8- CHANNEL MIXING CONSOLE S-8 ...

  • Nilfisk-ALTO S-8 - page 2

    1 SAFETY RELA TED SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Protective Ground T erminal AC mains (Alternating Current) Hazardous Live T erminal ON: Denotes the product is turned on. OFF: Denotes the product is turned off. W ARNING Describes precautions that should be observed to prevent the possibility of death or injury to the user . CAUT ...

  • Nilfisk-ALTO S-8 - page 3

    2 PREF ACE Dear Customer: Thank you very much L TO AUDIO TEAM Thank you for choosing the L TO S-8 8-Channel Mixing Console, which is the result of our L TO AUDIO TEAM's endeavours. For the L TO AUDIO TEAM, music and audio is more than a profession, it is a passion and an obsession! We have, in fact, been designing professional audio products f ...

  • Nilfisk-ALTO S-8 - page 4

    3 T ABLE OF CONTENTS 1.INTRODUCTION.........................................................................................................................................................4 2.FEA TURES..................................................................................................................................................... ...

  • Nilfisk-ALTO S-8 - page 5

    4 Y our S-8 is a 8-channel mixer and it is one of the most popular compact mixing consoles in the world. In fact it has been sold already in terms of thousands of units worldwide. Despite its compact dimensions, great performances and sound quality are insured thanks to the specification of the components used and the building quality . Y our S-8 i ...

  • Nilfisk-ALTO S-8 - page 6

    5 5 Input for Microphone and line provided with balanced 1/4" jack and XLR. Channel 5 features stereo Line input 1 additional input for Line level signal provided with balanced TRS 1/4" jacks The Microphone preamplifiers are Ultra Low Noise and are provided with +48 V olt Phantom Power Pre-fader and post-fader Auxiliary bus Main Output an ...

  • Nilfisk-ALTO S-8 - page 7

    6 3. READY TO ST ART? 3.1 Please check the AC V oltage available in your Country before connecting your S-8 to the AC socket. 3.2 Be sure that the main power switch is turned off before connecting the Mixer to the AC socket. Also, you should make sure that all Input and Output Controls are turned down. This will avoid damages to your speakers and a ...

  • Nilfisk-ALTO S-8 - page 8

    7 4. CONTROL ELEMENTS 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 MIC 1 MIC 2 MIC 3 MIC 4 LINE IN 1 TRIM LINE IN 2 TRIM LINE IN 3 TRIM LINE IN 4 TRIM BAL OR UNBAL BAL OR UNBAL BAL OR UNBAL BAL OR UNBAL BAL OR UNBAL BAL OR UNBAL BAL OR UNBAL BAL OR UNBAL LOW CUT 75Hz 18dB/Oct LOW CUT 75Hz 18dB/Oct LOW CUT 75Hz 18dB/Oct LOW CUT 75Hz 18dB/Oct LOW CUT 75Hz 18dB/Oct ...

  • Nilfisk-ALTO S-8 - page 9

    8 1 2 3 4. CONTROL ELEMENTS 4.1 The mono MIC/LINE channels 4 4.2 INPUT LEVEL setting This Control is provided with 2 different indication rings: One is for the Microphone and the other for the Line levels. When you use a microphone you shall read the OUTSIDE ring (0-60 dB), When you use a Line level instrument you shall read the INSIDE ring (+15~-4 ...

  • Nilfisk-ALTO S-8 - page 10

    9 5 4.4 STEREO INPUTS These are Channel 5 through 8. They are organised in stereo pair (5&6 pair also features XLR Mic Input) and they are provided with 1/4" TRS phone sockets. If you connect only the left jack, the input will operate in mono mode. 4.5 The 3 BANDS EQUALISER A 3-band equaliser is provided for all input channels with a wide ...

  • Nilfisk-ALTO S-8 - page 11

    10 9 4.6 AUX SENDS 10 4.7 P AN This is the P ANORAMA control, or balance control. Y ou can adjust the stereo image of the signal via this Control. Keep this control in center position and your signal will be positioned in the middle of stage. T urn this control fully counterclockwise and the signal will be present only on the left speaker and vice- ...

  • Nilfisk-ALTO S-8 - page 12

    11 4.1 1 MASTER SECTION 14 - MAIN MIX LEVEL This Control sets the amount of signal sent either to the Main Out socket or to the T ape Output. 15 - LED METER This stereo 12 segments Led Meter will indicate the level of the overall output signal. 16 - 2 TRACK signal path 17 - AUX RETURN 16 18 17 15 14 AUX RETURN 1 -+ 1 5 8 -+ 1 5 8 MAIN MIX LEVEL -4 ...

  • Nilfisk-ALTO S-8 - page 13

    21 23 22 1 2 STEREO AUX RETURN AUX SEND 2-TRACK IN/OUT T APE IN T APE OUT LEFT RIGHT L R 1 2 LEFT(MONO) RIGHT 21 - 2-TRACK IN/OUT Use the T ape input if you wish to listen to your Mix from a T aper Recorder or DA T , Y ou can assign the signal coming form the T aper Recorder either to a pair of studio monitor using the Control Room assignment on th ...

  • Nilfisk-ALTO S-8 - page 14

    13 4.12 REAR P ANEL DESCRIPTION 4 Use only with a 250V fuse POWER ON OFF PHANTOM RA TED POWER CONSUMPTION: 18W LEFT RIGHT RIGHT LEFT MAIN MIX OUTPUT (BAL/UNBAL) CONTROL ROOM OUTPUT CAUTION: REPLACE WITH THE SAME TYPE FUSE AND RA TING DISCONNECT SUPPL Y CORD BEFORE CHANGING FUSE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN W ARNING: SHOCK HAZARD A VIS ...

  • Nilfisk-ALTO S-8 - page 15

    T urn down all Input and Output Gain Controls. Connect phantom powered microphones before switching on the +48V olt Phantom Power switch. If you have a power amplifier connected to your S-8 set the Level of the amplifier at no more than 70%. Now , set the CONTROL ROOM/PHONES level at no more than 50%. In this way you will be able to hear later what ...

  • Nilfisk-ALTO S-8 - page 16

    15 Strain Clamp Sleeve Ti p Ring Sleeve=Ground/Screen Ring=Return Signal T ip=Send Signal Use for Pre-Gain Channel Inserts 1/4" Stereo (TRS) Jack Plug Strain Clamp Sleeve Ti p Ring Sleeve=Ground/Screen Ring=Right Signal T ip=Left Signal Use for Headphone, Stereo Return 1/4" Stereo (TRS) Jack Plug Strain Clamp Sleeve Ti p Sleeve=Ground/Scr ...

  • Nilfisk-ALTO S-8 - page 17

    16 Sleeve=Ground/Screen T ip=Signal Sleeve=Ground/Screen Ring=Return Signal (Connected together) T o Channel Insert T o T ape or FX Input 'T apped' Connection Direct Output Lead (Enables the Insert to be used as a Direct Output while maintaining the channel signal flow) Sleeve Sleeve=Ground/Screen Ring=Return Signal T ip=Send Signal T o C ...

  • Nilfisk-ALTO S-8 - page 18

    17 6. FOR THE EXPERTS WHO W ANT TO KNOW MORE Modification on mono and stereo channels Before Disconnect the POST route Aux (PRE) POST After Aux (PRE) POST Solder the PRE route As we have told you previously in this Manual, the Aux Send 2 Control both on Mono and stereo channels is factory wired as POST -F ADER. If you have some skill in electronic ...

  • Nilfisk-ALTO S-8 - page 19

    18 7. SYSTEM BLOCK DIAGRAMS ...

  • Nilfisk-ALTO S-8 - page 20

    19 8. TECHNICAL SPECIFICA TION Mono input channels Stereo input channels Line input Balanced Frequency response 10Hz to 55kHz, 3dB + Distortion (THD & N) 0.005% at +4dBu, 1kHz Impedances Microphone input 1.4kOhm Channel Insert return 2.5kOhm All other inputs 10kOhm or greater T ape out 1kOhm All other output 120Ohm Equalization Hi shelving + 15 ...

  • Nilfisk-ALTO S-8 - page 21

    20 9. W ARRANTY 1. W ARRANTY REGISTRA TION CARD T o obtain Warranty Service, the buyer should first fill out and return the enclosed W arranty Registration Card within 10 days of the Purchase Date. All the information presented in this W arranty Registration Card gives the manufacturer a better understanding of the sales status, so as to purport a ...

  • Nilfisk-ALTO S-8 - page 22

    SEIKAKU TECHNICAL GROUP LIMITED No. 1, Lane 17, Sec. 2, Han Shi W . Road, T aichung, 401 T aiwan http://www .altomobile.com T el: 886-4-22313737 email: info@altomobile.com Fax: 886-4-22346757 All rights reserved to AL TO Mobile. Due to continued development in response to customer feedback, product features, specifications and/or internal/external ...

Manufacturer Nilfisk-ALTO Category Musical Instrument

Documents that we receive from a manufacturer of a Nilfisk-ALTO S-8 can be divided into several groups. They are, among others:
- Nilfisk-ALTO technical drawings
- S-8 manuals
- Nilfisk-ALTO product data sheets
- information booklets
- or energy labels Nilfisk-ALTO S-8
All of them are important, but the most important information from the point of view of use of the device are in the user manual Nilfisk-ALTO S-8.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Nilfisk-ALTO S-8, service manual, brief instructions and user manuals Nilfisk-ALTO S-8. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Nilfisk-ALTO S-8.

Similar manuals

A complete manual for the device Nilfisk-ALTO S-8, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Nilfisk-ALTO S-8 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Nilfisk-ALTO S-8.

A complete Nilfisk-ALTO manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Nilfisk-ALTO S-8 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Nilfisk-ALTO S-8, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Nilfisk-ALTO S-8, that we can find in the current document
3. Tips how to use the basic functions of the device Nilfisk-ALTO S-8 - which should help us in our first steps of using Nilfisk-ALTO S-8
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Nilfisk-ALTO S-8
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Nilfisk-ALTO S-8 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Nilfisk-ALTO S-8?

Use the form below

If you did not solve your problem by using a manual Nilfisk-ALTO S-8, ask a question using the form below. If a user had a similar problem with Nilfisk-ALTO S-8 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)