Manual Panasonic PT-L735E

34 pages 2.24 mb
Download

Go to site of 34

Summary
  • Panasonic PT-L735E - page 1

    66-E NGLISH These Operating Instructions are printed on recycled paper. T rademark ac kno wledg ements B The SD logo is a trademark. B Windows is a trademark or registered trademark of Microsoft Corporation in the United States of America and other countries. B VGA and XGA are trademarks of International Business Machines Corporation. B Macintosh i ...

  • Panasonic PT-L735E - page 2

    2-E NGLISH IMPOR T ANT SAFETY NO TICE WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779. WARNING: 1) Remove the pl ...

  • Panasonic PT-L735E - page 3

    E NGLISH -5 Preparation Precautions with regar d to safety W ARNING If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the mains lead from the mains socket. B Do not continue to use the projector in such cases, otherwise fire or electric shocks co ...

  • Panasonic PT-L735E - page 4

    E NGLISH -7 Preparation 6-E NGLISH Do not look into the lens while the projector is being used. B Strong light is emitted from the projector ’ s lens. If you look directly into this light, it can hurt and damage your eyes. B Be especially careful not to let young children look into the lens. In addition, turn off the power when you are away from ...

  • Panasonic PT-L735E - page 5

    E NGLISH -9 Preparation 8-E NGLISH When inserting the batteries, make sure the polarities (+ and -) are correct. B If the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Use only the specified batteries. B If incorrect batteries are used, the ...

  • Panasonic PT-L735E - page 6

    E NGLISH -11 Preparation 10-E NGLISH Notes on use In order to get the best picture quality Draw curtains or blinds over any windows and turn off any fluorescent lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen. Do not touch the surfaces of the lens with your bare hands. If the surface of the le ...

  • Panasonic PT-L735E - page 7

    Pr ojector <Top, right and front> E NGLISH -13 Preparation 12-E NGLISH # Security lock This can be used to connect a commercially-available theft- prevention cable (manufactured by Kensington). This security lock is compatible with the Microsaver Security System from Kensington. Contact details for this company are given below. Kensington Tec ...

  • Panasonic PT-L735E - page 8

    E NGLISH -15 Preparation # RGB INPUT indicator (page 26) This indicator shows whether a signal is being input to the RGB input connectors (RGB 1 IN/RGB 2 IN). When an input signal is detected, the indicator illuminates. $ LAMP indicator (page 53) This indicator illuminates when it is time to replace the lamp unit. It flashes if a circuit abnormalit ...

  • Panasonic PT-L735E - page 9

    E NGLISH -17 Preparation 16-E NGLISH (PT -L735NTE only) Wireless car d SD memory card $ % # LOCK ' & Front Back # Connector This connector is for connecting the wireless card to the projector ’ s card slot. Be careful not to touch the connector. $ Wireless card power indicator Illuminates when the wireless card is operating. % Wireless c ...

  • Panasonic PT-L735E - page 10

    E NGLISH -19 Getting started 18-E NGLISH Pr ojector position H1 L L SH SW 16 (-5/8) L: Projection distance SH: Image height SW: Image width H1: Distance from centre of lens to bottom edge of projected image Top edge of screen Screen Bottom edge of screen Screen Pr ojection distances NOTE: B The dimensions in the table above are approximate. B If yo ...

  • Panasonic PT-L735E - page 11

    E NGLISH -21 Getting started 20E NGLISH Example of connecting to computer NOTE: B It is better to shut down the computer before turning off the MAIN POWER switch of the projector. B Do not input the signal to the RGB2 IN/RGB1 OUT connector when the RGB2 SELECT item in the OPTION menu is set to “OUTPUT”. (Refer to page 45.) NOTE: B If the video ...

  • Panasonic PT-L735E - page 12

    E NGLISH -23 Basic Operation 22-E NGLISH Operating range If the remote control unit is held so that it is facing directly in front of the remote control signal receptors on the front or rear of the projector, the operating range is within approximately 7 m (23´) from the surfaces of the receptors. Furthermore, the remote control unit can be operat ...

  • Panasonic PT-L735E - page 13

    E NGLISH -25 Basic Operation 24-E NGLISH Press the input select b utton to select the input signal. B A picture will be projected in accordance with the selected input signal. Follow the procedure below when you set the projector up first, and when you change the setup place. Press the A UT O SETUP button to initiate automatic positioning. B The ti ...

  • Panasonic PT-L735E - page 14

    E NGLISH -27 26-E NGLISH Power indicator Power indicator status Red Illuminated The projector is in standby mode and image projection is possible by pressing the POWER button. A picture is being projected. The lamp is cooling down after the power is turned off. (The cooling fan is operating.) The projector is preparing for projection after the powe ...

  • Panasonic PT-L735E - page 15

    E NGLISH -29 Useful functions 28-E NGLISH T urning off the picture and sound momentaril y (SHUTTER) The shutter function can be used to momentarily turn off the picture and sound from the projector when the projector is not being used for short periods of time, such as during breaks in meetings or when carrying out preparation. The projector uses l ...

  • Panasonic PT-L735E - page 16

    E NGLISH -31 Useful functions 30-E NGLISH Useful functions of the remote contr ol unit Laser beam pointer The laser beam emitted from the remote control can be used as a pointer by pointing forward to the screen. While the LASER button is being pressed, the laser beam is being emitted and the operating indicator illuminates. Do not look into the la ...

  • Panasonic PT-L735E - page 17

    E NGLISH -33 Adjustments and settings 32-E NGLISH 32 32 32 32 32 PICTURE PICTURE MODE CONTRAST BRIGHT SHARPNESS COLOR TEMP. WHITE BALANCE R WHITE BALANCE G WHITE BALANCE B STANDARD SELECT:[^][@] ADJUST:[{][}] ENTER:[ENTER] ESC:[MENU] STANDARD STANDARD 6 PICTURE menu (page 37) When an RGB signal is being input On-screen menus Menu screens The variou ...

  • Panasonic PT-L735E - page 18

    E NGLISH -35 Adjustments and settings 34-E NGLISH # Press the MENU button. The menu screen will be displayed. $ Press the I I or H H arrow buttons to select a menu. The selected menu screen will then be displayed. (Example: POSITION menu) % Press the G G arrow button to accept the selection. You can select an item here. The selected item is shown i ...

  • Panasonic PT-L735E - page 19

    E NGLISH -37 Adjustments and settings 36-E NGLISH & Select an item pressing the F F or G G buttons. A For the value adjusting items Press the ENTER button to display an individual adjustment screen. Press the I or H buttons to adjust the setting. You can also adjust the bar-scale items pressing the I or H buttons in the menu screen. Some items ...

  • Panasonic PT-L735E - page 20

    E NGLISH -39 Adjustments and settings 38-E NGLISH CONTRAST This adjusts the contrast of the picture. Press the H button to make the picture brighter, and press the I button to make the picture darker. (Adjust the BRIGHT setting first if required before adjusting the CONTRAST setting.) BRIGHT This adjusts the darker areas (black areas) in the pictur ...

  • Panasonic PT-L735E - page 21

    E NGLISH -41 Adjustments and settings 40-E NGLISH Select the item pressing the F or G buttons on the remote control unit or the projector. Press the I or H buttons, to adjust the alternative items. For the numerically adjustable items, press the ENTER button to display an individual screen, and press the I or H buttons to adjust the setting. Some i ...

  • Panasonic PT-L735E - page 22

    E NGLISH -43 Adjustments and settings 42-E NGLISH RESIZING This should normally be set to “ON”. (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 62 for details.) ON The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected. For signals w ...

  • Panasonic PT-L735E - page 23

    44-E NGLISH E NGLISH -45 Adjustments and settings Use the F and G buttons on the projector or remote control unit to select an item, then press the I or H buttons to change the setting. OSD ON The current input name is displayed in the top-right corner of the screen when the input signal is changed. OFF Use this setting when you do not want the cur ...

  • Panasonic PT-L735E - page 24

    E NGLISH -47 Adjustments and settings 46-E NGLISH RGB/YP B P R This setting is valid when 750p, HDTV60, HDTV50, 525p, 625i and 525i signals are being input. Select the setting in accordance with the input signal. The RGB/YP B P R item is displayed when the RGB1 IN or RGB2 IN connector has a signal being input. V GA60/525P When a VGA60 or 525p RGB s ...

  • Panasonic PT-L735E - page 25

    E NGLISH -49 Adjustments and settings Setting up the SECURITY function This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image. A logo also can be displayed before projection. Use the I and H buttons on the projector or remote co ...

  • Panasonic PT-L735E - page 26

    E NGLISH -51 Adjustments and settings 50-E NGLISH CHANGE TEXT The setup letters which will be displayed when TEXT DISPLAY is set to “ON” can be changed. Press the ENTER button to display the CHANGE TEXT screen. # Use the F , G , I and H buttons to select the characters, then press the ENTER button. (You can enter 20 characters continuously.) &l ...

  • Panasonic PT-L735E - page 27

    E NGLISH -53 Care and maintenance 52-E NGLISH Remedy Problem Indicator display Flashing (red) It is nearly time to replace the lamp unit. Illuminated (red) An abnormality has been detected in the lamp circuit. B Does “ REPLACE LAMP ” appear on the screen after the projector is turned on? B This occurs when the operation time for the lamp unit i ...

  • Panasonic PT-L735E - page 28

    E NGLISH -55 Care and maintenance 54-E NGLISH Replacing the lamp unit W arning When replacing the lamp, allow it to cool for at least one hour before handling it. B The lamp cover gets very hot, and contact with it can cause burns. Notes on replacing the lamp unit B The light generating lamp is made of glass, so dropping it or allowing it to hit ha ...

  • Panasonic PT-L735E - page 29

    E NGLISH -57 Care and maintenance 56-E NGLISH + Select the “LAMP RUN TIME” by pressing the F or G buttons. , Press and hold the ENTER button for approximately 3 seconds. The “ LAMP TIME RESET ” will be displayed. - Select “OK” by pressing the I I or H H buttons and press the ENTER button. . Turn off the power. This will reset the cumula ...

  • Panasonic PT-L735E - page 30

    E NGLISH -59 Care and maintenance 58-E NGLISH The picture does not display correctly. Picture from computer does not appear. Problem Possible cause B The signal format (TV system) may not be set correctly. B There may be a problem with the video tape or other signal source. B A signal which is not compatible with the projector may be being input. B ...

  • Panasonic PT-L735E - page 31

    E NGLISH -61 Others During RGB input/output: R.G.B.: 0.7 V [p-p], 75 Ω G.SYNC: 1.0 V [p-p], 75 Ω HD/SYNC: TTL, automatic plus/minus polarity compatible VD: TTL, automatic plus/minus polarity compatible AUDIO IN (for RGB): Single-line 0.5 V [rms] M3 jack (Stereo MINI) VIDEO IN: Single-line, RCA pin jack 1.0 V [p-p], 75 Ω S-VIDEO IN: Single-lin ...

  • Panasonic PT-L735E - page 32

    E NGLISH -63 Others 62-E NGLISH Appendix *1 The “ i ” appearing after the resolution indicates an interlaced signal. *2 The following symbols are used to indicate picture quality. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is projected B Some loss of data occurs to make pro ...

  • Panasonic PT-L735E - page 33

    E NGLISH -65 Others 64-E NGLISH Control commands The commands which the personal computer can use to control the projector are shown in the following table. Command Control Contents Remarks In standby mode, all commands other than the PON command are ignored. B The PON command is ignored during lamp ON control. B If a PON command is received while ...

  • Panasonic PT-L735E - page 34

    66-E NGLISH These Operating Instructions are printed on recycled paper. T rademark ac kno wledg ements B The SD logo is a trademark. B Windows is a trademark or registered trademark of Microsoft Corporation in the United States of America and other countries. B VGA and XGA are trademarks of International Business Machines Corporation. B Macintosh i ...

Manufacturer Panasonic Category Projector

Documents that we receive from a manufacturer of a Panasonic PT-L735E can be divided into several groups. They are, among others:
- Panasonic technical drawings
- PT-L735E manuals
- Panasonic product data sheets
- information booklets
- or energy labels Panasonic PT-L735E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Panasonic PT-L735E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Panasonic PT-L735E, service manual, brief instructions and user manuals Panasonic PT-L735E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Panasonic PT-L735E.

A complete manual for the device Panasonic PT-L735E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Panasonic PT-L735E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Panasonic PT-L735E.

A complete Panasonic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Panasonic PT-L735E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Panasonic PT-L735E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Panasonic PT-L735E, that we can find in the current document
3. Tips how to use the basic functions of the device Panasonic PT-L735E - which should help us in our first steps of using Panasonic PT-L735E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Panasonic PT-L735E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Panasonic PT-L735E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Panasonic PT-L735E?

Use the form below

If you did not solve your problem by using a manual Panasonic PT-L735E, ask a question using the form below. If a user had a similar problem with Panasonic PT-L735E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)