English dropdown-ico

Manual Adams & Co MIW-20

12 pages 0.26 mb
Download

Go to site of 12

Summary
  • Adams & Co MIW-20 - page 1

    Adam Equipment MIW-20 BABY SCALE ADAM EQUIPMENT CO. LTD. p.n. 4295, Rev. B, March 2004 © Adam Equipment Company 2004 ...

  • Adams & Co MIW-20 - page 2

    © Adam Equipment Company 2004 ...

  • Adams & Co MIW-20 - page 3

    CONTENTS 1.0 INTRODUCTION ......................................................................................................... 2 2.0 TECHNICAL SPECIFICATIONS .................................................................................. 3 3.0 LOCATING THE SCALE ............................................................................... ...

  • Adams & Co MIW-20 - page 4

    1.0 INTRODUCTION • The MIW-20 scales are precision m edical scales specially designed to weigh babies on a cradle. • The scale has a capacity of 20 kg and readability of 0.01 kg. • The scale displays the weight in kilograms or pounds. • The scale is fast, accurate and simple to use. • It operates using an internal alka line battery (PP3, ...

  • Adams & Co MIW-20 - page 5

    2.0 TECHNICAL SPECIFICA TIONS Specifications MIW-20 Maximum Capacity, max 20 Kg (44.4 lbs.) Readability, d 10 g (1/2 oz.) Tare range, -T -20 kg (44.4 lbs.) Battery One, PP3, 9V Operating temperature +5° C / + 35° C Net weight 2.15 kg (4.73 lbs.) © Adam Equipment Company 2004 3 ...

  • Adams & Co MIW-20 - page 6

    3.0 LOCA TING THE SCALE • Place the scale on a stable surface. A soft and uneven floor (e.g. carpet, linoleum) could cause an erroneous weight reading. • The ambient temperature of the scale should be kept as constant as possible. Do not place the scale where it may be s ubjected to draughts or heater and direct sunlight. It is advisable not to ...

  • Adams & Co MIW-20 - page 7

    5.0 KEY DESCRIPTIONS [ON / OFF/TARE] Turns the scale on or off (keep it pressed for 3 seconds). Sets a zero condition when the platform is empty. Sets the display to zero by storing the current weight in the memory to tare the scale. [UNIT] Sets the Units. [HOLD] Holds the average display value. 6 . 0 O P E R A T I O N S • To start weighing, turn ...

  • Adams & Co MIW-20 - page 8

    • To zero the display, press the [ON/OFF/TARE] key. • In practice when the scale is turned on, the [ON/OFF/TARE] key is pressed to zero the display, if necessary. • After the display is at zero, plac e the baby to be weighed on the cradle of the scale. • The display will show the weight in the chosen unit. • If necessary the weight of bla ...

  • Adams & Co MIW-20 - page 9

    8.0 HOLD FUNCTION • Due to the baby’s movement, the we ight shown on the display will change all the time. After the baby is placed on the scale, press [HOLD] to hold the weight value. The display shows ‘ hold ’. The scale will calculate the average of the former weight values taken automatically. • The display will be locked when the [HO ...

  • Adams & Co MIW-20 - page 10

    10.0 CALIBRA TION PROCEDURE • Place the scale on a flat platform after inserting a PP3, 9V alkaline battery. • Press the [ON/OFF/TARE] key to turn the power ON. • Display will show " 0000 ” initially, 3 seconds later it will show ” 0.00 ” • Create a short circuit by plugging a scr ew driver into the test pin hole which is on the ...

  • Adams & Co MIW-20 - page 11

    Manufacturer’s Declaration of Conformity This product has been manufactured in accor dance with the harmonised European standards, following the provisions of the below stated directives: Electro Magnetic Compatib ility Directive 89/336/EEC Low Voltage Directive 73/23/EEC Adam Equipment Co. Ltd. Bond Avenue Denbigh East Estate Milton Keynes, MK1 ...

  • Adams & Co MIW-20 - page 12

    ADAM EQUIPMENT is an ISO 9001:2000 certified global organisation with more than 30 years experience in the production and sa le of electronic weighing equipments. Products are sold through a world wide di stributor network -supported from our company locations in the UK, USA and SOUTH AFRICA. The company and their distributors offer a full range of ...

Manufacturer Adams & Co Category Building Set

Documents that we receive from a manufacturer of a Adams & Co MIW-20 can be divided into several groups. They are, among others:
- Adams & Co technical drawings
- MIW-20 manuals
- Adams & Co product data sheets
- information booklets
- or energy labels Adams & Co MIW-20
All of them are important, but the most important information from the point of view of use of the device are in the user manual Adams & Co MIW-20.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Adams & Co MIW-20, service manual, brief instructions and user manuals Adams & Co MIW-20. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Adams & Co MIW-20.

Similar manuals

A complete manual for the device Adams & Co MIW-20, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Adams & Co MIW-20 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Adams & Co MIW-20.

A complete Adams & Co manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Adams & Co MIW-20 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Adams & Co MIW-20, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Adams & Co MIW-20, that we can find in the current document
3. Tips how to use the basic functions of the device Adams & Co MIW-20 - which should help us in our first steps of using Adams & Co MIW-20
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Adams & Co MIW-20
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Adams & Co MIW-20 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Adams & Co MIW-20?

Use the form below

If you did not solve your problem by using a manual Adams & Co MIW-20, ask a question using the form below. If a user had a similar problem with Adams & Co MIW-20 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)