English dropdown-ico

Manual NEC X651UHD

55 pages Not applicable
Download

Go to site of 55

Summary
  • NEC X651UHD - page 1

    Lar ge Format Display User’ s Man ual MultiSync X651UHD ...

  • NEC X651UHD - page 2

    Inde x DECLARA TION OF CONFORMITY ............................................................................................................. English-1 Important Information ................................................................................................................................... English-2 W ARNING ....................... ...

  • NEC X651UHD - page 3

    English-1 English DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U .S. Responsible P ar ty: NEC Di ...

  • NEC X651UHD - page 4

    English-2 Impor tant Inf ormation TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE. REFER SERVICING ...

  • NEC X651UHD - page 5

    English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualifi ed service personnel. • Do not ...

  • NEC X651UHD - page 6

    English-4 Contents Y our new MultiSync monitor box* should contain the following: • LCD monitor • Power cord* 1 • V ideo Signal Cable (DisplayPort cable) • V ideo Signal Cable (Mini DisplayPort to DisplayPort cable) • Wireless Remote Control and AAA Batteries • Setup Manual • Clamp x 1 • Screw with washer (M4 x 10) x 1 • CD-ROM Po ...

  • NEC X651UHD - page 7

    English-5 English This de vice cannot be used or installed without the T abletop Stand or other mounting accessor y f or suppor t. For proper installation it is strongly recommended to use a trained, NEC authorized ser vice person. F ailure to f ollo w NEC standard mounting procedures could result in damage to the equipment or injur y to the user o ...

  • NEC X651UHD - page 8

    English-6 Attaching Mounting Accessories The monitor is designed for use with the VESA mounting system. 1. Attach eyebolts (not inc luded) for mounting This model is equipped with attachable eyebolts to aid in mounting. • Screw the eyebolts into eyebolt holes as shown in the picture. • Be sure eyebolts are secure. • In order to move the monit ...

  • NEC X651UHD - page 9

    English-7 English 3. Using Option Board 1. T urn off the main power switch. 2. Remove the attached slot cover by unscrewing the installed screws ( Figure 1 ). 3. Insert option board in to the monitor . Attach the slot cover by using the removed screws. NO TE: Please contact your supplier for available option boards. Do not apply excessive force to ...

  • NEC X651UHD - page 10

    English-8 P ar ts Name and Functions Contr ol P anel 쐃 PO WER button ( ) Switches the power on/off. See also page 16. 쐇 MUTE button (MUTE) Switches the audio mute ON/OFF . 쐋 INPUT button (INPUT) Acts as SET/POINT ZOOM button within OSD menu. (T oggle switches between [DVI1], [DVI2], [DPORT], [HDMI1], [HDMI2], [HDMI3], [HDMI4], [OPTION]*). The ...

  • NEC X651UHD - page 11

    English-9 English T erminal P anel 쐃 A C IN connector Connects with the supplied power cord. 쐇 Main P ower Switc h On/Off switch to turn main power ON/OFF . 쐋 Service por t This USB slot is for future software upgrades. 쐏 LAN port (RJ-45) LAN connection. See page 34 and 37. NO TE: Please give priority for use to LAN1. 쐄 REMO TE IN Use the ...

  • NEC X651UHD - page 12

    English-10 Wireless Remote Contr ol 쐃 PO WER button Switches the power on/standby . 쐇 INPUT button Selects input signal. HDMI1: HDMI1 HDMI2: HDMI2 HDMI3: HDMI3 HDMI4: HDMI4 DVI1: DVI1 DVI2: DVI2 DisplayPort: DPORT OPTION: OPTION* 2 쐋 MUL TI INPUT b utton Selects input signal. See page 29. PRESET1: PRESET1* 3 PRESET2: PRESET2* 3 . 쐏 OPTION M ...

  • NEC X651UHD - page 13

    English-11 English Operating Range for the Remote Contr ol Points the top of the remote control toward the LCD monitor ’s remote sensor during button operation. Uses the remote control within a distance of about 7 m (23 ft.) from remote control sensor or at a horizontal and vertical angle of within 30° within a distance of about 3.5 m (10 ft.). ...

  • NEC X651UHD - page 14

    English-12 1. Determine the installation location CA UTION: Installing your LCD monitor must be done by a qualifi ed technician. Contact your dealer for more information. CA UTION: MOVING OR INST ALLING THE LCD MONIT OR MUST BE DONE BY FOUR OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls. CA UTION: Do n ...

  • NEC X651UHD - page 15

    English-13 English 5. Switch on the power of all the attac hed external equipment When connected with a computer , switch on the power of the computer fi rst. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when required. 8. Adjust the screen (See pages 23 and ...

  • NEC X651UHD - page 16

    English-14 Connections NO TE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image. NO TE: Use an audio cable without a built-in resistor . Using an audio cable with a built-in resistor turns down the sound. Before making connections: * First turn off the power of ...

  • NEC X651UHD - page 17

    English-15 English Connecting a P ersonal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image. Some display cards may not display an image correctly . Y our LCD monitor displays proper image by adjusting the factory preset timing signal automatically . <T ypical factory preset signal t ...

  • NEC X651UHD - page 18

    English-16 Basic Operation P ower ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NO TE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button. Main Power Switch OFF ON Power Button Using the remot ...

  • NEC X651UHD - page 19

    English-17 English Aspect DVI1, DVI2, DPORT , OPTION* 4 , PRESET1* 5 , PRESET2* 5 FULL 1:1 ZOOM NORMAL HDMI1, HDMI2, HDMI3, HDMI4, PRESET1* 5 , PRESET2* 5 FULL WIDE DYNAMIC 1:1 ZOOM NORMAL *4: This function depends on which option board you use. *5: This function depends on INPUT CONFIGURA TION setting. Aspect ratio of image Unchanged view* 3 Recom ...

  • NEC X651UHD - page 20

    English-18 INPUT CONFIGURA TION Y ou can display 3840 x 2160 60 Hz image by using multiple input signals. Selects input sources. Depending on the setting at HDMI/DVI SELECT , the selection of INPUT CONFIGURA TION is changed. HDMI/DVI SELECT INPUT CONFIGURA TION HDMI OFF HDMIx4 (PRESET1) HDMIx2 (PRESET1) HDMIx2 (PRESET2) HDMI/DVI OFF HDMIx2 (PRESET1 ...

  • NEC X651UHD - page 21

    English-19 English Picture Mode Depending on the setting at SPECTRA VIEW ENGINE (see page 31), selection of Picture mode is changed. SPECTRA VIEW ENGINE is “ON”: Selects fi ve picture modes by Picture mode in OSD menu or using Picture mode button on the wireless remote control. Selecting Picture mode with wireless remote control By pressing Pi ...

  • NEC X651UHD - page 22

    English-20 GAMMA Allows you to manually select the brightness level of grayscale. There are fi ve selections: sRGB, L ST AR, DICOM SIM. and CST . We recommend to show grayscale image data on screen. sRGB: GAMMA setting for sRGB. L ST AR: GAMMA setting for Lab color space. DICOM SIM.: DICOM GSDF (Grayscale Standard Display Function) is typically us ...

  • NEC X651UHD - page 23

    English-21 English SPECTRA VIEW ENGINE is “OFF”: Selects fi ve picture modes by Picture mode in OSD menu or using Picture mode button on the wireless remote control. DVI1, DVI2, DPORT , OPTION*, PRESET1* 1 , PRESET2* 1 ST ANDARD sRGB CUSTOM1 CUSTOM2 HIGHBRIGHT HDMI1, HDMI2, HDMI3, HDMI4, PRESET1* 1 , PRESET2* 1 ST ANDARD CINEMA CUSTOM1 CUSTOM2 ...

  • NEC X651UHD - page 24

    English-22 OSD (On-Screen-Displa y) Contr ols NO TE: Some functions may not be available depending on the model or optional equipment. PICTURE MODE Goto Adjustment S ele c t Return Clos e 70 50 50 50 50 50 THANK YOU FOR SA VING THE ENVIRONMENT . CARBON FOOTPRINT 86.0 % Input source Main Menu Icons Main Menu Item Sub Menu Key Guide Adjustment Settin ...

  • NEC X651UHD - page 25

    English-23 English Setting Default PICTURE BACKLIGHT* 1 Adjusts the overall image and background brightness. Press + or - to adjust. NOTE: When MODE1 or MODE2 is selected in ROOM LIGHT SENSING, this function cannot be changed. Depends on destination CONTRAST* 1 Adjusts the image brightness in relationship to the input signal. Press + or - to adjust ...

  • NEC X651UHD - page 26

    English-24 ZOOM The image can be expanded/reduced. NOTE: The expanded image which is outside of active display area is not shown. The reduced image may have some image degradation. - ZOOM Maintains the aspect ratio while zooming. - HZOOM Amount of horizontal zoom. VZOOM Amount of vertical zoom. H POS Horizontal position. V POS V ertical position. I ...

  • NEC X651UHD - page 27

    English-25 English SCHEDULE LIST List of schedules. - DA TE & TIME Sets the date, time, and daylight saving region. Date & time must be set in order for the “SCHEDULE” function to operate. See page 32. YEAR Confi gures the year for the real-time clock. - MONTH Confi gures the month for the real-time clock. - DA Y Confi gures the day ...

  • NEC X651UHD - page 28

    English-26 TEXT TICKER OFF MODE Enables T ext T icker and allows you to set Horizontal or Vertical direction. POSITION Selects the location of the T ext T icker on the screen. SIZE Determines the size of the T ext T icker in relationship to the overall screen size. DETECT Enables auto-detection of the T ext T icker . PICTURE1 Selects input signals. ...

  • NEC X651UHD - page 29

    English-27 English MUL TI DISPLA Y ID CONTROL Sets the monitor ID number from 1-100 and group ID from A-J. DETECTED MONITORS shows the number of all monitors which follow in the chain with LAN. NOTE: Group ID is made of multiple selections. 1 AUTO ID When “YES” is selected, monitor ID numbers are set automatically in all monitors which follow i ...

  • NEC X651UHD - page 30

    English-28 HEA T ST A TUS Displays status of the F AN, BACKLIGHT and TEMPERA TURE. - F AN CONTROL Cooling fan reduces the temperature of the display to protect from overheating. If “AUTO” is selected, you can adjust the start temperature of the cooling fan and fan speed. AUTO, HIGH SCREEN SA VER Use the SCREEN SA VER function to reduce the risk ...

  • NEC X651UHD - page 31

    English-29 English AD V ANCED OPTION1 INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices are connected. NOTE: When SUPER is selected in INPUT CHANGE, this function cannot be changed. NONE NONE The Monitor will not search the other video input ports. FIRST DETECT Corresponding option only* 1 When the ...

  • NEC X651UHD - page 32

    English-30 DEINTERLACE Selects the IP (Interlace to Progressive) conversion function. NOTE: For DVI input “DVI-HD” needs to be enabled in the DVI mode menu. ON ON Converts interlaced signals to progressive. This is the default setting. OFF Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of image r ...

  • NEC X651UHD - page 33

    English-31 English AD V ANCED OPTION2 AUTO DIMMING* Adjusts the backlight of the LCD automatically depending on the amount of ambient light. - AUTO BRIGHTNESS DVI1, DVI2, DPORT , OPTION* 1 , PRESET* 2 , PRESET2* 2 inputs only . Adjusts the brightness level according to the input signal. NOTE: Do not select this function when ROOM LIGHT SENSING is M ...

  • NEC X651UHD - page 34

    English-32 NO TE 1: CREA TING A SCHEDULE The schedule function allows the display to be set to power on and off at dif ferent times. Up to seven different schedules can be programmed. T o program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons. Press the SET/POINT ZOOM or the + button to enter the ...

  • NEC X651UHD - page 35

    English-33 English REMO TE CONTROL ID FUNCTION REMO TE CONTR OL ID The remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors. For example: if there ...

  • NEC X651UHD - page 36

    English-34 Y ou can control multiple monitors by using RS-232C, REMOTE IN or LAN daisy-chain connection. NO TE: Multiple monitors that are daisy-chained have a limit to the connectable monitors. When manually specify the ID number or control by the specifi ed ID number , please execute AUTO ID (see page 27) previously . Main Monitor Sub Monitors C ...

  • NEC X651UHD - page 37

    English-35 English This LCD monitor can be controlled by connecting a personal computer with a RS-232C (reverse type) terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF . • Switching between input signals. • Sound Mute ON or OFF . Connection LCD Monitor + computer RS-232C Cable computer RS-232C MultiSync ...

  • NEC X651UHD - page 38

    English-36 3) Control command diagram For other commands, please see “External_Control.pdf” fi le on the CD-ROM. Function (Monitor ID = 1) Code Data Power ON 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0d Power OFF 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 76 0d Input Source Select DisplayPort 01 30 41 30 45 30 4 ...

  • NEC X651UHD - page 39

    English-37 English Connecting to a Netw ork Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. T o use a LAN connection, you are required to assign an IP address. Example of LAN connection: Server Hub NOTE: Use a category 5 or higher LAN cable. LAN cable (not supplied) Netw ork ...

  • NEC X651UHD - page 40

    English-38 Preparation Before Use Connect the monitor to a commercially available LAN cable before engaging in browser operations. Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a factor , it is possible that items that hav ...

  • NEC X651UHD - page 41

    English-39 English Network Setting Click “NETWORK” on the left side of HOME. IP SETTING Set for IP ADDRESS SETTINGS. AUTO: Automatically assign an IP address. MANUAL: Set your IP address of the network connected to the monitor . NOTE: Consult your network administrator for the IP address when [AUT O] is selected for [IP SETTING]. IP ADDRESS Set ...

  • NEC X651UHD - page 42

    English-40 Mail Setting Click “MAIL” on the left side of HOME. This option notifi es your computer of an error message via e-mail when using wired LAN. An error message notifi cation will be sent when an error occurs in the monitor . ALERT MAIL Checking [ENABLE] will turn on the Alert Mail feature. Checking [DISABLE] will turn off the Alert M ...

  • NEC X651UHD - page 43

    English-41 English Alert error message list Error n umber * ErrorCode Alert mail Message Explanation Measure 70h ~ 7Fh The monitor ’s power supply is not functioning normally . Standby power Abnormal Please contact your supplier . 80h ~ Fh The cooling fan has stopped. Cooling fan Abnormal Please contact your supplier . 90h ~ 9Fh The monitor ’s ...

  • NEC X651UHD - page 44

    English-42 SNMP Setting Click “SNMP” on the left side of HOME. This function allows for getting status and controlling of a monitor via the network. V ersion: SNMP v1 Authenticated plaintext by community name, not return a confi rmation message of T rap. SNMP v2c Authenticated plaintext by community name, return a confi rmation message of T r ...

  • NEC X651UHD - page 45

    English-43 English AMX Setting Click “AMX” on the left side of HOME. AMX BEACON T urn on or of f for detection from AMX Device Discovery when connecting to the network supported by AMX’s NetLinx control system. TIP: When using a de vice that suppor ts AMX De vice Discov ery , all AMX NetLinx control system will recognize the de vice and do wn ...

  • NEC X651UHD - page 46

    English-44 Name Setting Click “NAME” on the left side of HOME. MONITOR NAME Set a monitor name. The name must be 16 characters or less. The default is model name. HOST NAME T ype in the hostname of the network connected to the monitor . Up to 15 alphanumeric characters can be used. DOMAIN NAME T ype in the domain name of the network connected t ...

  • NEC X651UHD - page 47

    English-45 English PD List Information Click “PD LIST” on the left side of HOME. Show the list of ID and IP address of multiple monitors that are daisy-chained. Only the master monitor can show the list. Memo Setting Click “MEMO” on the left side of HOME. Set a title and message. TITLE A title must be 24 characters or less. MESSAGE A messag ...

  • NEC X651UHD - page 48

    English-46 Using “SET/POINT ZOOM” button on a remote control allows to enlarge a partial of image. Press CH+/- button to zoom up or down. The image can be expanded from 1 to 10 times. 1 Press [SET/POINT ZOOM] button on a remote control. An icon will be a magnifi er . 2 Move magnifi er icon by [ ] [ ] [+] [-] button. 3 Press [CH+] to zoom up. ...

  • NEC X651UHD - page 49

    English-47 English This function allows to get the data of monitor ’s status by wireless communication even while the monitor is of f. Some menu of OSD, you can set by this function. NO TE: Sensor position: See page 9. Please contact your supplier for detailed information. Function name Setting Copy Setting read and write function Display informa ...

  • NEC X651UHD - page 50

    English-48 Reduced Footprint: Provides the ideal solution for environments with superior image quality . SPECTRA VIEW ENGINE: This system is designed for professionals with color-critical applications. Each display screen is calibrated at factory . By making adjustments directly in the display hardware, optimal settings are confi gured without any ...

  • NEC X651UHD - page 51

    English-49 English No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check the main Power Switch, it should be in the ON position. • Power Switch and computer power switch should be in the ON position. • Check to make sure that a suppor ...

  • NEC X651UHD - page 52

    English-50 Either light vertical or horizontal stripes may appear , depending on the specifi c display pattern. This is no product fault or degradation. “SCHEDULE”/“OFF TIMER” function is not working properl y • The “SCHEDULE” function will be disabled when the “OFF TIMER” is set. • If the “OFF TIMER” function is enabled an ...

  • NEC X651UHD - page 53

    English-51 English Specifi cations Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 65”/1639.0 mm diagonal 0.372 mm 3840 x 2160 Over 1073 million colors (depending on display card used) 450 cd/m 2 (Max.) @25°C 1300:1 89° (typ) @ CR>10 Frequency Horizontal: V ertical: 31.5 kHz - 1 ...

  • NEC X651UHD - page 54

    English-52 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help defi ne and comply with the latest independent standar ...

  • NEC X651UHD - page 55

    English-53 English WEEE Mark (Eur opean Directive 2012/19/EU) Within the Eur opean Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as sign ...

Manufacturer NEC Category Monitor

Documents that we receive from a manufacturer of a NEC X651UHD can be divided into several groups. They are, among others:
- NEC technical drawings
- X651UHD manuals
- NEC product data sheets
- information booklets
- or energy labels NEC X651UHD
All of them are important, but the most important information from the point of view of use of the device are in the user manual NEC X651UHD.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NEC X651UHD, service manual, brief instructions and user manuals NEC X651UHD. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NEC X651UHD.

Similar manuals

A complete manual for the device NEC X651UHD, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NEC X651UHD by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NEC X651UHD.

A complete NEC manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NEC X651UHD - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NEC X651UHD, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NEC X651UHD, that we can find in the current document
3. Tips how to use the basic functions of the device NEC X651UHD - which should help us in our first steps of using NEC X651UHD
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NEC X651UHD
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NEC X651UHD in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NEC X651UHD?

Use the form below

If you did not solve your problem by using a manual NEC X651UHD, ask a question using the form below. If a user had a similar problem with NEC X651UHD it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)