English dropdown-ico

Manual Mustek TP-6000

27 pages 0.28 mb
Download

Go to site of 27

Summary
  • Mustek TP-6000 - page 1

    TOUCH PANEL POS SYSTEM Rev. : A1 TP-6000 SERIES USER’S MANUAL ...

  • Mustek TP-6000 - page 2

    CMANUTP6000-2 SOME IMPORTANT NOTES FCC NOTES This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 1 ...

  • Mustek TP-6000 - page 3

    i TABLE OF CONTENTS BRIEF INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 THE USER’S MANUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 THE PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1 Overview . . . . . . . . . . . . . . . . . . . . . ...

  • Mustek TP-6000 - page 4

    ii INSTALLING CASH DRAWERS . . . . . . . . . . . . . . . . . . . . . . . . 3 - 6 WALL MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7 LOCATION FOR INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 3 - 7 USING THE TOUCH POS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1 APPLICATI ...

  • Mustek TP-6000 - page 5

    TP6000 USER’S MANUAL 1 - 1 BRIEF INTRODUCTION THE USER ’ S MANUAL The purpose of this manual is to guide the user in the initial installation and general use of the Posiflex fully integrated compact touch terminal system with touch panel input. TP6000 series is a product group of fully integrated PC based touch terminal systems. However, this m ...

  • Mustek TP-6000 - page 6

    TP6000 USER’S MANUAL 1 - 2 f) Height adjustment: the high / low adjustment gives 20 mm difference in height g) Resistive type touch panel h) Extra long life touch panel that endures 10 million up to 35 million touches in one location i) Spill proof water resistant structure allows for easy cleaning j) Easy maintenance construction k) Various I/O ...

  • Mustek TP-6000 - page 7

    TP6000 USER’S MANUAL 1 - 3 q) Touch control functions : left/right mouse buttons, double click, drag & drop r) Touch sound can be pitch adjusted and enabled/disabled by software control s) High resolution touch sensor: 1024 x 1024 t) DRAM memory can extend to 1GB u) Dual display support under OS’s supporting multiple display output v) VGA m ...

  • Mustek TP-6000 - page 8

    TP6000 USER’S MANUAL 1 - 4 ...

  • Mustek TP-6000 - page 9

    TP6000 USER’S MANUAL 2 - 1 PARTS IDENTIFIC ATION FRONT VIEW The MSR unit is optional for both 12” and 15” models. The orange/green LED in the logo area is multipurpose. Please refer to the paragraph discussing the LED indication in the “USING THE TOUCH POS” chapter of this manual. Display Screen + Touch Panel Main Unit Adjustable Stand As ...

  • Mustek TP-6000 - page 10

    TP6000 USER’S MANUAL 2 - 2 SIDE VIEWS Right Side Vie w Left Side Vie w Lock/Release Lever Push In This Direction To Adjust The Tilt Angle Of The Display Panel Slide Switch For Power On/Off Control Push Down To Switch The Power ON/OFF Latch Hole For Cable Cover Latch Hole For Cable Cover ...

  • Mustek TP-6000 - page 11

    TP6000 USER’S MANUAL 2 - 3 REAR VIEW REAR VIEW OF MAIN UNIT Note: The contents in the service window may evolve as technology progresses. Please consult your dealer for applicability. Lock/Release Button To Detach The Main Unit Optional MSR Unit Lock/Release Lever Cable Exit Service Window Removal Hollow Of Cable Cover Matching Pegs Cable Exit Ca ...

  • Mustek TP-6000 - page 12

    TP6000 USER’S MANUAL 2 - 4 ADJUSTABLE STAND ASSEMBLY BOTTOM OF STAND ASSEMBLY Base Matching Holes Stand Lock/Release Lever Lock/Release Button For Main Unit Cable Exit Cable Passage Cover UPS Battery Cover Stand Base ...

  • Mustek TP-6000 - page 13

    TP6000 USER’S MANUAL 3 - 1 INS TALLATION GUIDES CAUTION: Before installing any cables or peripherals to the terminal, please always make certain that the system is turned off and the external power source is removed to prevent electric hazard! Never touch any pins within the connectors or circuits to avoid high voltage hazard or electrostatic dis ...

  • Mustek TP-6000 - page 14

    TP6000 USER’S MANUAL 3 - 2 Cable Passage Cover Cable Passage Four Screws Holding Battery Cover Battery Cover PREPARING STAND ASSEMBLY Take the adjustable stand assembly and turn it up side down to show the bottom of the base. Now, remove the 2 screws on the cable passage cover and lift the cable passage cover away from the base, to show the passa ...

  • Mustek TP-6000 - page 15

    TP6000 USER’S MANUAL 3 - 3 INSTALLING UPS BATTERY Place the optional UPS battery in the battery compartment (shown top left). Screw on the battery cover and route the battery cable through the base. Please enable the UPS features in the software settings before use. ROUTING THE CABLES Place all required cables into the cable passage. Insert one e ...

  • Mustek TP-6000 - page 16

    TP6000 USER’S MANUAL 3 - 4 PREPAR ING THE MAIN UNIT On the back of the main unit, there are 4 matching pegs and a service window. Push the service window open, in the direction indicated in the picture. Below, one can find a button cell battery socket, a 1 x 3 header (JP10) with 1 jumper and a 2 x 3 header (JP8) with 2 jumpers. This battery socke ...

  • Mustek TP-6000 - page 17

    TP6000 USER’S MANUAL 3 - 5 toward the upper round part of the hole and make sure that all pegs have been properly seated. Then slide the main unit down to move the pegs into the narrow section of the slot until the rear latch clicks. Note that all the cables come out of the stand from the lower edge and won’t get trapped by this mounting operat ...

  • Mustek TP-6000 - page 18

    TP6000 USER’S MANUAL 3 - 6 CONNECTING CABLES Connect the required cables to the appropriate connectors. Please make sure that each connector is connected to the right port with the correct orientation. Some connectors, such as the LAN connector, the external FDD connector, the power connector, the cash drawer connector, and the COM4 connector for ...

  • Mustek TP-6000 - page 19

    TP6000 USER’S MANUAL 3 - 7 marked “signal cable from POS Printer” at the rear of each cash drawer. The cable lengths for the two 8 pin plugs are different. Use the shorter one for the first cash drawer “CR1” and use the longer one for the second cash drawer “CR2” that will be controlled by the application software. Using this method, ...

  • Mustek TP-6000 - page 20

    TP6000 USER’S MANUAL 3 - 8 be either 360 mm or 380 mm depending on the adjusted position. When the main unit is tilted to near horizontal position, the total height required is 275 mm. ...

  • Mustek TP-6000 - page 21

    TP6000 USER’S MANUAL 4 - 1 USING THE TOUCH POS APPLICATION ENVIRONMENT It is very important that you check the following operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation. The installation should be such that there is at least 25mm air clearance around any top or side ventilation ...

  • Mustek TP-6000 - page 22

    TP6000 USER’S MANUAL 4 - 2 Serial Port – COM1 CAUTION: The COM1 serial port should be occupied by either a suitable serial device or a COM1 terminator at all times (as supplied). Without this provision the cash drawer control ports will fail to work correctly. The recommended devices for COM1 are either an external customer display or a serial ...

  • Mustek TP-6000 - page 23

    TP6000 USER’S MANUAL 4 - 3 Ÿ When the external power fails and the TP6000 is working on the optional UPS battery power, the green LED flashes. Ÿ When the optional UPS battery is close to full discharge from supporting the TP6000 in the absence of the external power, the orange LED flashes rapidly. Ÿ When the TP6000 is turned off and the extern ...

  • Mustek TP-6000 - page 24

    TP6000 USER’S MANUAL 4 - 4 Software Support The TP6000 series provides a software power off command for application program maneuvers. The TP6000 also provides a specific means for the software to detect if the system is working on external or UPS battery power. Due to this feature, compatible software applications have the ability to change oper ...

  • Mustek TP-6000 - page 25

    TP6000 USER’S MANUAL 4 - 5 MAGNETIC STRIPE READER The magnetic stripe reader, if installed, will be mounted on the right edge of the TP6000 series. When reading an ISO standard magnetic card, please face the magnetic stripe toward the TP6000 series and slide the card downward through the slot. CASH DRAWER(S) The cash drawer control port, if conne ...

  • Mustek TP-6000 - page 26

    TP6000 USER’S MANUAL 4 - 6 TOUCH PANEL The touch panel in TP6000 series uses either a PS2 interface or an RS232 interfaced. When its driver is properly installed, this touch panel works exactly like a standard mouse. However, if the system is running under safe mode due to a previous improper shutdown or for any other reason, most drivers are dis ...

  • Mustek TP-6000 - page 27

    TP6000 USER’S MANUAL 4 - 7 This program controls software gating of data read from each MSR track and the way that the data is sent from the reader to the system, including the coding method against language systems, data transmission speed, delivery and selection on the leading/ending code of each track. This program also controls the beep gener ...

Manufacturer Mustek Category Computer Monitor

Documents that we receive from a manufacturer of a Mustek TP-6000 can be divided into several groups. They are, among others:
- Mustek technical drawings
- TP-6000 manuals
- Mustek product data sheets
- information booklets
- or energy labels Mustek TP-6000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Mustek TP-6000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Mustek TP-6000, service manual, brief instructions and user manuals Mustek TP-6000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Mustek TP-6000.

Similar manuals

A complete manual for the device Mustek TP-6000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Mustek TP-6000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Mustek TP-6000.

A complete Mustek manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Mustek TP-6000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Mustek TP-6000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Mustek TP-6000, that we can find in the current document
3. Tips how to use the basic functions of the device Mustek TP-6000 - which should help us in our first steps of using Mustek TP-6000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Mustek TP-6000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Mustek TP-6000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Mustek TP-6000?

Use the form below

If you did not solve your problem by using a manual Mustek TP-6000, ask a question using the form below. If a user had a similar problem with Mustek TP-6000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)