English dropdown-ico

Manual Shindaiwa X7502801100

28 pages 2.42 mb
Download

Go to site of 28

Summary
  • Shindaiwa X7502801100 - page 1

    AHS242 ARTICULA TED HEDGE TRIMMER SHIND AIWA OWNER’S/OPERA T OR'S MANU AL WARNING! Always wear eye and ear protection when operating this machine! T o minimize the risk of injury to yourself and others, read this manual and familiarize yourself with its contents. X7502801 100 06/10 ...

  • Shindaiwa X7502801100 - page 2

    2 Contents P AGE Introduction The Shindaiwa AHS242 Articulated Hedge T rimmer is designed and built to deliver superior performance and reliability without compromise to qual- ity , comfort, safety or durability . Shindaiwa's engines represent the leading edge of high-performance, engine technology , delivering excep- tionally high power with ...

  • Shindaiwa X7502801100 - page 3

    3 Read and follow this manual, make sure anyone using the trimmer does likewise. Failure to do so could result in serious personal injury or machine failure. Keep this manual for future reference. Safety tip shoes or boots with non-slip sole should be worn. Keep bystanders at least 50 feet (15 meters) away from the operating trimmer to reduce the r ...

  • Shindaiwa X7502801100 - page 4

    4 WARNING! M oving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. • AL W A YS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. • DO NOT start or operate unit unles ...

  • Shindaiwa X7502801100 - page 5

    5 IMPORT ANT! Caution, Danger , W arning, and Operation Information Labels: Make sure all informa- tion labels are undamaged and readable. Immediately replace damaged or missing information labels. New labels are available from your local authorized Shindaiwa dealer . Safety Equipment and Labels Cutter Blade Cover Handle Shaft Safety Label Throttle ...

  • Shindaiwa X7502801100 - page 6

    6 Operator Safety Keep bystanders at least 15 meters away from the operating trimmer to reduce the risk of being struck by falling objects or thrown debris. Always operate with both hands rmly gripping the machine. Always wear a hard hat to reduce the risk of head injuries during operation of this machine. Always wear eye and hearing protection. ...

  • Shindaiwa X7502801100 - page 7

    7 Specications Specications are subject to change without notice. An Emission Control Label is located on the unit. (This is an EXAMPLE ONL Y ; information on label varies by en- gine F AMIL Y). PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD) The 300 hour emission compliance period is the time span selected by the manufacturer certif ...

  • Shindaiwa X7502801100 - page 8

    8 Assembly Outer T ube Socket-head Capscrews Handle Mounting Bracket Throttle Assembly Before assembling, make sure you have all the components required for a complete unit: Unit assembly ■ Cutter blade cover ■ Prior T o Assembly IMPORT ANT! The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “fro ...

  • Shindaiwa X7502801100 - page 9

    9 T ravel Limiter The cutter assembly can be adjusted to 10 different positions ranging from 90° to 225° from the outer tube as shown. Always make sure the latch lock is securely locked after each adjustment. NOTE: This articulated hedge trimmer is equipped with a travel limiter that pre- vents the cutter assembly from rotating outside of the 90? ...

  • Shindaiwa X7502801100 - page 10

    10 W ARNING! Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause performance problems, loss of power , overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, ...

  • Shindaiwa X7502801100 - page 11

    11 After use • DO NOT store a unit with fuel in its tank. Leaks can occur . Return unused fuel to an approved fuel stor- age container . Storage - Fuel storage laws vary by locality . Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container . Store in a well-ventilated, unoccup ...

  • Shindaiwa X7502801100 - page 12

    12 WARNING! The cutting blades may move (oscil- late) when the engine is started. Keep away from the cutter assem- bly while starting the engine! IMPORT ANT! The primer system only pushes fuel through the carburetor . Repeatedly pressing the primer bulb will not ood the engine with fuel. CA UTION! Do not pull the recoil starter to the end of the ...

  • Shindaiwa X7502801100 - page 13

    13 WARNING! Burn danger from hot engine! Starting a ooded engine Slide the ignition switch to the “I” (ON) position 1. . Open the choke, put the throttle lever in the full throttle position, then clear excess fuel from the combustion chamber by 2. cranking the engine several times. If the engine still fails to start or re, refer to the tr ...

  • Shindaiwa X7502801100 - page 14

    14 Safe Operation This machine is designed especially for trimming hedges. Never use this machine for any other purposes. Never try to cut stones, met- als, plastics or any other hard objects. Using this Articulated Hedgetrimmer for other purposes than trimming hedges may damage the machine or cause serious injury . Before trimming: Wear suitable p ...

  • Shindaiwa X7502801100 - page 15

    15 251027 Prior to each work day , perform the following: Remove all dirt and debris from ■ the engine, check the cooling ns and air cleaner for clogging, and clean as necessary . Carefully remove any accumula- ■ tions of dirt or debris from the muf- er and fuel tank. Check cooling air intake area at base of crank- case. Remove all debris ...

  • Shindaiwa X7502801100 - page 16

    16 Maintenance (continued) 10-Hour maintenance (more frequently in dusty conditions) Remove the air cleaner cover by 1. loosening the cover screw(s) and lifting. Remove the air cleaner element. 2. In dusty applications the lter ■ should be gently blown out with compressed air daily or 2 to 3 times per week. CA UTION! Nev er o pera te the unit ...

  • Shindaiwa X7502801100 - page 17

    17 Lubricate cutter assembly and gearcase Gearcase grease tting B Hooked wire Fuel lter element Remove and replace the fuel lter element Remove and replace the fuel lter element Outer T ube Gearcase Clamp Index Screw Gearcase Maintenance (continued) CA UTION! Do not remove the D-shaped shim washer from the gearcase clamp! The shim washe ...

  • Shindaiwa X7502801100 - page 18

    18 Maintenance (continued) 135 Hour Maintenance WARNING! Never operate the unit with a damaged or missing mufer or spark arrester! Operating with a missing or damaged spark arrester is a re hazard and could also dam - age your hearing. Engine Cover Screws Mufer Cover Engine Cover Mufer Cover Screw Spark arrester screen Spark arrester co ...

  • Shindaiwa X7502801100 - page 19

    19 Remove the spark plug and pour ■ about 1/4 oz. of engine oil into the cylinder through the spark plug hole. Slowly pull the recoil starter 2 or 3 times so oil will evenly coat the interior of the engine. Reinstall the spark plug. Before storing the unit, repair or ■ replace any worn or damaged parts. Remove the air cleaner element ■ from t ...

  • Shindaiwa X7502801100 - page 20

    20 T r oubleshooting Guide V aporlock. Engine hot/heat soaked. Low fuel quality . Let cool completely and restar t. Refi ll with fr esh, clean unleaded gasoline with a pump octane of 89 or higher mixed with an air cooled engine oil that meets or exceeds ISO-L-EGD and/or JASO FD classifi ed oils at 50:1 gasoline/oil ratio. What T o Check Possible ...

  • Shindaiwa X7502801100 - page 21

    21 ADDITIONAL PROBLEMS Poor acceleration. Clogged air fi lter . Clogged fuel fi lter . Lean fuel/air mixture. Idle speed set too low . Ignition switch tur ned of f. Fuel tank empty . W ater in the fuel. Clogged fuel fi lter . Shor ted spark plug or loose ter minal. Ignition failure. Piston seizure. Ground (stop) wire is disconnected, or switch i ...

  • Shindaiwa X7502801100 - page 22

    22 ADDITIONAL PROBLEMS Poor acceleration. Clogged air fi lter . Clogged fuel fi lter . Lean fuel/air mixture. Idle speed set too low . Ignition switch tur ned of f. Fuel tank empty . W ater in the fuel. Clogged fuel fi lter . Shor ted spark plug or loose ter minal. Ignition failure. Piston seizure. Ground (stop) wire is disconnected, or switch i ...

  • Shindaiwa X7502801100 - page 23

    23 SHINDAIW A LIMITED W ARRANTY ST A TEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO, INC’S RESPONSIBILITY ECHO Incorporated’s (ECHO, INC.) Limited W arranty , provides to the original purchaser that this Shindaiwa product is free from defects in material and workmanship. Under normal use and maintenance from date of purchas ...

  • Shindaiwa X7502801100 - page 24

    24 PURCHASED REP AIR P ARTS AND ACCESSORIES • 90-day all applications A TTENTION ENGINE POWERED PRODUCT OWNERS This Shindaiwa engine powered product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior performance. T o help ensure the performance of the unit, it is required to use engine oil which meets ...

  • Shindaiwa X7502801100 - page 25

    25 Environmental Protection Agency (EP A) Y our emission control system may include parts such as: carburetor/fuel injected system, ignition system, catalytic converter , fuel tank, fuel lines, fuel caps, valves, canisters,  lters vapor hoses, clamps connectors, and other associ- ated components. For engines less than or equal to 80cc, only the ...

  • Shindaiwa X7502801100 - page 26

    26 NO TES ...

  • Shindaiwa X7502801100 - page 27

    27 NO TES ...

  • Shindaiwa X7502801100 - page 28

    ECHO Incorporated. 400 Oakwood Road Lake Zurich, IL 60047-1564 U.S.A. T elephone: 1-877-986-7783 Fax: 1-847-540-8416 www .shindaiwa.com Y amabiko Corporation 7-2 Suehirocho 1-Chome, Ohme, T okyo, 198-8760, Japan Phone: 81-428-32-61 18 Fax: 81-428-32-6145 T17913001001/T17913999999 Ser vicing Infor mation Par ts/Serial Number Genuine Shindaiwa Parts ...

Manufacturer Shindaiwa Category Trimmer

Documents that we receive from a manufacturer of a Shindaiwa X7502801100 can be divided into several groups. They are, among others:
- Shindaiwa technical drawings
- X7502801100 manuals
- Shindaiwa product data sheets
- information booklets
- or energy labels Shindaiwa X7502801100
All of them are important, but the most important information from the point of view of use of the device are in the user manual Shindaiwa X7502801100.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Shindaiwa X7502801100, service manual, brief instructions and user manuals Shindaiwa X7502801100. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Shindaiwa X7502801100.

Similar manuals

A complete manual for the device Shindaiwa X7502801100, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Shindaiwa X7502801100 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Shindaiwa X7502801100.

A complete Shindaiwa manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Shindaiwa X7502801100 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Shindaiwa X7502801100, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Shindaiwa X7502801100, that we can find in the current document
3. Tips how to use the basic functions of the device Shindaiwa X7502801100 - which should help us in our first steps of using Shindaiwa X7502801100
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Shindaiwa X7502801100
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Shindaiwa X7502801100 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Shindaiwa X7502801100?

Use the form below

If you did not solve your problem by using a manual Shindaiwa X7502801100, ask a question using the form below. If a user had a similar problem with Shindaiwa X7502801100 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)