Manual Sony CRX - 160E

13 pages 0.55 mb
Download

Go to site of 13

Summary
  • Sony CRX - 160E - page 1

    CRX - 160E CD-R/RW Drive Unit User’s Guide ©2000 by Sony Australia. CRX - 160E CD-R/RW Drive Unit User’s Guide Revision 1.1 ...

  • Sony CRX - 160E - page 2

    3 2 This unit uses CD-RW discs with the following mark. This unit uses CD-R discs with the following mark. This unit uses CD-ROM discs with the following mark. When you use this unit as a CD player, use compact discs with the following mark. WARNING — You are cautioned that any changes or modifications not expressly approved in this manual will v ...

  • Sony CRX - 160E - page 3

    5 4 Trademarks • MS-DOS is a registered trademark of Microsoft Corporation. • IBM PC, PC/XT, and PC/AT are registered trademarks of International Business Machines Corporation. • HP Vectra is a registered trademark of the Hewlett-Packard Company. • Molex is a registered trademark of Molex, Inc. • AMP is a registered trademark of AMP, Inc. ...

  • Sony CRX - 160E - page 4

    7 6 Location and Function of Parts and Controls Front Panel 1 Disc tray Accepts a CD-ROM, CD-R and CD-RW disc on its tray. 2 Emergency eject hole Insert a fine rod into this hole to eject the tray manually in emergencies. 3 Eject button Opens and closes the disc tray. 4 Busy indicator This indicator shows the unit’s status in various phases of op ...

  • Sony CRX - 160E - page 5

    9 8 Precautions ■ Installation • Avoid placing the drive in a location subject to: –high humidity –high temperature –excessive dust –mechanical vibration –direct sunlight. We recommend to use the drive in a horizontal or vertical position. Do not use it in a tilted position. ■ Operation • Do not move the drive during operation. Th ...

  • Sony CRX - 160E - page 6

    11 10 Setting the Jumpers Set the jumpers on the rear of the drive in accordance with the configuration of your computer system. The illustration below shows the jumpers set to the “MASTER” position, this is the default set by the factory. Your computer should have a PRIMARY IDE bus and a SECONDARY IDE bus. Each bus can have one MASTER and one ...

  • Sony CRX - 160E - page 7

    13 12 Connecting the Drive The drive should be connected to the computer with the following connectors: • DC INPUT connector. • AUDIO OUT connector (if you plan to connect audio equipment). • IDE INTERFACE connector. ■ DC INPUT connector The pin assignment for the DC connector is as follows. After matching the beveled edges, insert the plug ...

  • Sony CRX - 160E - page 8

    15 14 ■ IDE INTERFACE connector 1 Firmly insert one end of the interface cable into the INTER- FACE CONNECTOR. 2 Attach the other end of the cable to the PRIMARY or SECONDARY IDE interface connectors on the computers mainboard. Refer to your computers user manual for more information on where these connectors will be located. Closing the Computer ...

  • Sony CRX - 160E - page 9

    17 16 Using Discs Storing Discs • Do not store the disc in a location subject to: –high humidity –high temperature –excessive dust –direct sunlight Care of Discs • Hold the disc by its edge. Do not touch the surface. • Do not wipe a CD-R disc or CD-RW disc with a cleaner before recording data. To avoid scratching the recording surface ...

  • Sony CRX - 160E - page 10

    19 18 Operating the Drive Note: When the drive is set up in vertical position, use the disc locks to prevent your disc from falling. See “How to Use the Disc Locks” on page 21 for details. 4 Gently push the tray or press the eject button to close the tray. The drive will begin reading the Table of Contents (TOC) data when it accepts the disc. T ...

  • Sony CRX - 160E - page 11

    21 20 Operating the Drive How to Use the Disc Locks The disc tray has four disc locks that prevent the disc from falling when the drive is set up in vertical position. Note: When the drive is used in horizontal position, you do not need to lock the disc. ■ Locking and Unlocking All of the four locks are set in the unlocked position (facing outwar ...

  • Sony CRX - 160E - page 12

    23 22 Specifications Specifications ■ General Host interface ATAPI compliant Read Function This drive conforms to the “Multiread” specification. Acceptable discs: CD-ROM data (mode-1) CD-ROM XA (mode 2, form 1 & 2) CD-Digital Audio Audio-combined CD-ROM CD-I (mode 2, form 1 & 2) CD-I Ready Photo CD (Single and Multi session) Video CD ...

  • Sony CRX - 160E - page 13

    25 24 Specifications ■ Dimensions and weight Dimensions 146.0 x 41.4 x 203 mm ( w / h / d ) Mass 920 g ■ Power requirement Voltage +5 V ± 5 % DC and +12V DC ± 10 % Sleep +5 Vdc 150 mA (Typical) < 200 mA (Max) +12 Vdc 0.2 mA (Typical) < 0.3 mA (Max) ■ Dimension diagram Important: Screws must not extend more than 6.0mm into the side pan ...

Manufacturer Sony Category Computer Drive

Documents that we receive from a manufacturer of a Sony CRX - 160E can be divided into several groups. They are, among others:
- Sony technical drawings
- CRX - 160E manuals
- Sony product data sheets
- information booklets
- or energy labels Sony CRX - 160E
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sony CRX - 160E.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sony CRX - 160E, service manual, brief instructions and user manuals Sony CRX - 160E. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sony CRX - 160E.

A complete manual for the device Sony CRX - 160E, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sony CRX - 160E by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sony CRX - 160E.

A complete Sony manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sony CRX - 160E - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sony CRX - 160E, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sony CRX - 160E, that we can find in the current document
3. Tips how to use the basic functions of the device Sony CRX - 160E - which should help us in our first steps of using Sony CRX - 160E
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sony CRX - 160E
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sony CRX - 160E in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sony CRX - 160E?

Use the form below

If you did not solve your problem by using a manual Sony CRX - 160E, ask a question using the form below. If a user had a similar problem with Sony CRX - 160E it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)